d0c586a17f
Put the genassym.sh output in a temp file, and mv -f it, in case
...
it fails spectacularly and doesn't clean up. Also, remove dependencies for
genassym.o (since it no longer exists).
1997-03-14 23:16:08 +00:00
f7ad6fff40
Put the genassym.sh output in a temp file, and mv -f it, in case
...
it fails spectacularly and doesn't clean up. Also, don't depend genassym.c
(since it no longer exists), and remove dependencies for genassym.o (since it
no longer exists).
1997-03-14 23:14:39 +00:00
40b1a6f68b
No longer need to define SUN_BOOTPARAMS
1997-03-14 21:28:38 +00:00
ca5f101ba7
Remove code that stops transfers of >63K. The Sun 4 doesn't have this
...
limitation, and minphys() is supposed to catch this on other architectures.
1997-03-14 19:57:20 +00:00
76c1d7a5b5
We don't even need to clear the BSS here; it's been done by the boot
...
program for a Long Time, and doing it (correctly :-) here means that
we wipe out, among other things, boothowto. (oops!)
1997-03-14 19:50:06 +00:00
8a5abffaf5
Add some instrumentation to keep track of PMEG allocation.
...
Enabled #if DIAGNOSTIC.
1997-03-14 14:28:45 +00:00
a276c4ee15
- Some cosmetic changes to whitespace
...
- make the command parser table-driven
1997-03-14 06:56:27 +00:00
6ed34bacd9
Purely cosmetic whitespace changes.
1997-03-14 06:55:07 +00:00
e96f48563b
Add netboot.bin to CLEANFILES.
1997-03-14 05:07:27 +00:00
63a75dcdcf
Make this work with obj* dirs.
1997-03-14 04:59:34 +00:00
3a99046fbb
Update this to new config.
1997-03-14 04:21:13 +00:00
627952867a
Ressurect (not quite, since this is in fact the new boot code Makefile
...
now).
1997-03-14 02:54:14 +00:00
816bb96145
Initial import of new boot code, created by Matthias Drochner with a
...
little hacking by me. This isn't strictly identical to his 920312
release -- I've hacked it a bit -- but since we are taking over change
control it doesn't matter much.
1997-03-14 02:40:32 +00:00
2eb5a59f71
Initial import of new boot code, created by Matthias Drochner with a
...
little hacking by me. This isn't strictly identical to his 920312
release -- I've hacked it a bit -- but since we are taking over change
control it doesn't matter much.
1997-03-14 02:40:29 +00:00
80bf6049dd
fix from Matt Jacob: configuration accesses need PCI Byte enables just
...
like sparse memory accesses do.
1997-03-13 23:59:36 +00:00
2f598d011a
Sync with sun3 (Trap 1,2,15 handlers)
1997-03-13 20:46:37 +00:00
0fefd47a64
Use arch/m68k/m68k/sig_machdep.c
1997-03-13 20:30:19 +00:00
5c553cfd2f
Factor out sendsig() and sys_sigreturn() from $arch/machdep.c
1997-03-13 19:14:35 +00:00
de65671490
Ported to the sun3x by Jeremy
1997-03-13 17:52:44 +00:00
ee531cb3c9
s/sun3x_/_/ in sun3x_(round|trunc)_(page|seg) macros
1997-03-13 17:40:33 +00:00
711486fd1b
Fix a typo (oops).
1997-03-13 17:14:45 +00:00
24120736d8
Import the sun3 version of this on the "vendor branch".
1997-03-13 16:27:27 +00:00
f3952a7326
No longer need to override DEFS
1997-03-13 16:19:01 +00:00
032d13fc7d
s/sun3_/_/ in sun3_(round|trunc)_(page|seg) macros
1997-03-13 15:58:49 +00:00
e4a48696a6
Add member to bitmap struct that gives the size of mappable memory.
1997-03-13 12:37:08 +00:00
d8319f5c75
remove leftover from switch to the mi kgdb interface.
1997-03-13 10:25:25 +00:00
c6d2740564
Integrate Phil Budne's latest changes to the scn driver. From his README:
...
* Uses Counter/Timer dynamicly for rate generation; You can
have both 19200 and 38400 on one duart, and 57600 on another!
* Improved scninfo program to dump driver internal information.
implemented counters for parity err, framing err, break
* Delays changes until transmitter idle to avoid "glitches"
* Cleaned up scn_softc member names
* Untested support for sc26c92 (I don't yet have any to test with);
+ Will use alternate rate tables (include 115.2kbps and 230.4kbps)
+ Will raise FIFO rx interrupt threshold and watchdog timer
at higher rates.
+ Unknown (to me) how fast pc532 MC145406 driver chips can go
NOTE: It seems like it may be a BAD idea to use a sc26c92 as
a console port for now; the PROM doesn't know to reset the
chip back to scn2692 mode!!
1997-03-13 10:24:14 +00:00
8229701876
oops, don't need trap.h here anymore
1997-03-13 09:29:03 +00:00
72ba35e689
Don't genassym the trap type values; just include <machine/trap.h>
1997-03-13 09:27:21 +00:00
deeac396e7
Use genassym.sh to facilitate cross compiling.
1997-03-13 09:24:21 +00:00
f6d3f6c93b
Use the script version to facilitate cross compiling.
1997-03-13 09:22:19 +00:00
4913ba5369
V_SWTCH is no longer needed.
1997-03-13 04:37:20 +00:00
2f18f33d16
Use genassym.cf, to support cross-compiling.
1997-03-13 04:22:05 +00:00
a15ede807a
add entries for isp, as isp* at pci? dev ? function ?, for Qlogic ISP 10x0
...
PCI SCSI controllers. Also, add the attached SCSI busses.
1997-03-13 04:15:24 +00:00
e36a5ca4de
change microcode array definitions from "unsigned short" to the more
...
correct u_int16_t, and remove bogus casts that the old definition
required.
1997-03-13 04:07:44 +00:00
919efaeb60
Make the microcode table const.
1997-03-13 03:33:03 +00:00
ac3b8b13b7
Don't share the silence block between devices. Make silence filling work for
...
more encodings, and make it device-independent. From Lennart Augustsson, in
PR kern/3305.
1997-03-13 02:19:32 +00:00
85068c2512
add ahc and bha at EISA
1997-03-13 01:15:52 +00:00
96153388c0
add in the 'isp' device, for Qlogic ISP 1020-based Sbus SCSI board support
1997-03-13 00:46:13 +00:00
13a313fd8d
add entries for ahc and bha PCI devices. clean up some
1997-03-13 00:43:37 +00:00
9ceaaf3e7b
Turn off "cache pagetables bit" on non-MXCC modules.
1997-03-12 22:52:19 +00:00
b8d7e3deab
No longer needed.
1997-03-12 22:40:07 +00:00
2330e40bc9
enable Matt Jacob's ISP 10x0 driver, now that it's in the source tree.
1997-03-12 21:50:15 +00:00
8c689e6477
Copyright notice consistency, per Matthew Jacob.
1997-03-12 21:09:43 +00:00
cf26d31ad2
NetBSD RCS ID tweaks, a few comment block tweaks. Also, make copyright
...
notices consistent (per Matt Jacob).
1997-03-12 21:06:41 +00:00
099e30a322
ISP 10x0 driver from Matthew Jacob of NASA Ames Research Center.
...
(March 12, 1997 version).
1997-03-12 20:44:50 +00:00
7fb73fe0b2
Fix error in computation of BSS size when clearing it.
1997-03-12 19:49:11 +00:00
2bbaeef8cc
Fast and dirty fix to avoid panics during autoconf of KFQSA DSSI disks.
...
Controller errors showing up can't be handled anyway.
1997-03-12 19:42:30 +00:00
0daaaa0fc2
add kn8ae CPU support to GENERIC kernels. Also, add kn8ae devices.
...
Add "isp", "ahc", and "bha" config lines, but comment them out until
their sources are in the tree and/or their alpha patches are in the tree.
1997-03-12 19:29:14 +00:00
ffba332bb5
AlphaServer 8200 & 8400 support, including CPU specific details, TurboLaser
...
system bus support, and KFTxx support. From Matthew Jacob, NASA Ames
Research Center.
1997-03-12 19:19:54 +00:00
mycroft