88b626a585
make compile w/o MULTIPROCESSOR
1998-09-29 15:55:47 +00:00
55df520938
Can't use -traditional; __RENAME() breaks due to a limitation in the
...
"traditional" C preprocessor.
1998-09-29 08:28:20 +00:00
5a5380b92b
This program is icky, and will die soon. So, don't put a whole lot of
...
effort into it, but make it build again by casting the second arg to signal().
1998-09-29 08:27:36 +00:00
005af97f9e
Use "print-objdir".
1998-09-29 08:16:11 +00:00
69d81d8df1
Prototype cpu_halt_secondary().
1998-09-29 07:07:36 +00:00
30e4de5632
In cpu_reboot(), halt the secondary CPUs.
1998-09-29 07:07:09 +00:00
1b8e855f2a
First try at a HALT interprocessor interrupt handler.
1998-09-29 07:06:02 +00:00
94b97dce9b
CPUF_HATCHED is dead, replaced by cpus_running bitmask.
1998-09-29 07:05:30 +00:00
99698d1a1a
- Use a bitmask for "running CPUs", rather than a flag in the softc.
...
- Add a function to halt a secondary CPU.
- Enable interrupts on secondary CPUs once they've hatched.
1998-09-29 07:04:58 +00:00
469f020ae3
Don't process CLOCK or DEVICE interrupts if we're not the primary CPU.
1998-09-29 07:02:04 +00:00
30ec5015b1
In exception_return(), if MULTIPROCESSOR, skip software interrupts, ASTs,
...
and floating point handling if we're not the primary CPU.
1998-09-29 07:01:16 +00:00
392a96cc91
Define the offset of hwrpb->rpb_primary_cpu_id.
1998-09-29 06:22:09 +00:00
ce9e4beacf
Simplify the asm constraints in mrg_aline_super(), in order to
...
less thoroughly confuse the compiler when used without -O. Fixes
PR 5496.
1998-09-29 05:24:08 +00:00
183f609c83
- Do not set TLCPUMASK on non-I/O nodes. That register exists only on
...
I/O nodes. Previous code erroneously set it on CPU nodes only.
- In both the single- and multi-processor case, route all interrupts from
I/O nodes to the primary CPU, for now.
1998-09-29 04:22:36 +00:00
3c2e2c8622
This should need opt_execfmt.h.
1998-09-28 23:42:48 +00:00
4c2e179b93
PROM doens't need to be mapped to start up the secondaries, so remove some
...
dead code.
1998-09-28 22:21:13 +00:00
9bd45385a9
Turn off some debugging printfs, and kludge around a boot block bug until
...
I can install fixed boot blocks on my MP test systems.
1998-09-28 21:50:32 +00:00
705cac105e
Invalidate the TB and I-stream upon entry, and fix a typo in the wrkgp call.
1998-09-28 21:48:50 +00:00
34a8ac8484
Set the primary CPU's PAL revision to the OSF/1 PAL revision after switching
...
to it, per the Green Book (pointed out by Chris Demetriou).
1998-09-28 21:21:55 +00:00
5caecb6ae0
Fix for some EGCS warnings.
1998-09-28 21:18:55 +00:00
fd24065cb5
pcvt is no longer used with bebox.
1998-09-28 09:49:49 +00:00
4a04e5038e
pcvt is no longer used with bebox.
1998-09-28 09:33:12 +00:00
e30046b37d
This was a copy of an very old editing error in the amiga pmap.c....
...
(Ignatios Souvatzis)
1998-09-28 07:51:23 +00:00
980b2b416f
fix PMAP_ACTIVATE_ASN_SANITY() arguments
1998-09-27 17:23:25 +00:00
8c29324cc7
Kernel configuration with multi-processor support.
1998-09-27 15:10:25 +00:00
a965fe73b1
Add support for the TFL LAN Inc. E410/E420 PDS cards. Based on code
...
from Ken Nakata in PR 6199, which was in turn derived from code from
Haru Maruyama <h-maru @ da2.so-net.ne.jp>.
1998-09-27 14:39:11 +00:00
0a090af2c7
Add `ldstub()'.
1998-09-27 14:32:14 +00:00
e6ce8bcfc7
sparc spin lock functions.
1998-09-27 14:31:18 +00:00
b7f86e40fa
The smallest positive normalized number in extended precision is 2^-16383.
...
Underflow handling is different from i387.
1998-09-27 04:54:49 +00:00
463301afbf
Use common date conversion functions - not runtime efficient, but
...
brain-efficient...
1998-09-26 21:02:56 +00:00
1826b0bca2
Use the RTC chip as time-of-year clock, as the PROM console and Ultrix do.
1998-09-26 20:59:42 +00:00
0a1a6fb7e0
This file is no longer used
1998-09-26 20:51:45 +00:00
166c2a5fa5
fix typo
1998-09-26 20:15:59 +00:00
9f352b7e15
Stop all other CPUs upon entering a debugger.
1998-09-26 20:14:48 +00:00
01e64c640c
Implement mp_pause_cpus() and mp_resume_cpus(): pause and resume all
...
CPUs except the one running this code.
1998-09-26 20:13:56 +00:00
6ad3a051e8
mp_{pause,resume,halt}_cpu() prototypes.
1998-09-26 20:12:06 +00:00
6eb98a7967
4/NPTEPG is 0. This is a very old editing error.
1998-09-26 19:26:58 +00:00
029ab07a4d
delint
1998-09-26 19:21:19 +00:00
8ddcd514a6
Use CPU start function in obp.c
1998-09-26 19:09:56 +00:00
fe1cf94b9f
Add wrappers for PROM's CPU start/stop functions.
1998-09-26 19:08:09 +00:00
a89a10c394
Add file obp.c
1998-09-26 19:06:47 +00:00
43c1cb852c
Move PROM interface prototypes into openprom.h
...
Use the `openprom_addr' structure for passing around physical addresses.
1998-09-26 18:20:19 +00:00
09a4cf6caa
Move PROM interface routines into their own file.
1998-09-26 18:15:34 +00:00
d208510692
Add support for AdvanSys Ultra Wide boards
1998-09-26 16:38:43 +00:00
87fab23d68
make it compile with DEBUG
1998-09-26 10:07:36 +00:00
b356238b16
Add one more new MIPS processor PRid 0x30 for IDT RC64474/64475. These
...
are successors of RC4640/RC4650, but fully brewed MIPS, then capable of
running NetBSD/mips.
1998-09-26 08:16:38 +00:00
7af1966350
Regenerate from podules.
1998-09-26 03:30:50 +00:00
3da75bb55d
Update the list of MIPS processor revision ID. PRids of Toshiba TX3900
...
and QED R4650 comflict each other.
1998-09-26 03:29:37 +00:00
a96d8e733a
Add EESOX manufacturer ID and SCSI2 podule ID.
1998-09-26 03:29:36 +00:00
2c50ec242f
Add basic interprocessor interrupt sending and receiving code. Current
...
IPI functions: HALT, IMB, TBIA, TBIAP.
XXX HALT is not yet implemented, it's just a stub.
1998-09-26 00:03:51 +00:00
78d445810b
Add an interprocessor interrupt bitmask to the cpu_softc, and publicize
...
the cpus[] array.
1998-09-26 00:01:17 +00:00
1f4921edce
- Oops, forgot to initalize the cpu_softc simplelock.
...
- Add yet another debugging printf.
1998-09-26 00:00:33 +00:00
e2aa38459c
Implement atomic quadword load-and-latch.
1998-09-25 23:59:42 +00:00
01c75223d7
Minor style tweaks.
1998-09-25 22:06:33 +00:00
eb8de83739
`eccmemctl' inadvertently got into the `mandatory' list.
1998-09-25 11:40:16 +00:00
d3ce2be01c
Don't bother printing the message from the secondary console. All it is
...
is basically the acknowledgement of the START command. Print the idle
USPACE address for now. Use the alias "apcb_backup_ksp" when setting the
backup kernel stack pointer in the secondary's boot HWPCB.
1998-09-25 03:23:50 +00:00
57e656b2ec
The processor unique value in the PCB is used as a backup kernel stack
...
pointer when booting secondary CPUs. Add an alias for it.
1998-09-25 03:21:31 +00:00
3ea9247ac8
GENERIC config file + MULTIPROCESSOR + some debugging stuff.
1998-09-25 00:46:09 +00:00
fcb0203141
First-cut at code to spin up secondary processors on a multiprocessor
...
Alpha system, conditional on MULTIPROCESSOR.
NOTE: This does not yet work completely. The secondary CPU begins the
boot process, but never makes it into the cpu spinup trampoline. This
is merely a snapshot of a work-in-progress.
1998-09-24 23:28:17 +00:00
feb1d22dcc
NCPU > 1 -> MULTIPROCESSOR
1998-09-24 23:00:43 +00:00
3cde5f5817
Machine-dependent spin lock operations for Alpha, included if MULTIPROCESSOR
...
is specified.
1998-09-24 22:32:35 +00:00
91a031471d
Implement atomic test-and-set for longwords (32-bit).
1998-09-24 22:22:07 +00:00
1b04ff4897
Make prom_enter() and prom_leave() public.
1998-09-24 21:18:13 +00:00
ba6d13d876
Use the primary CPU ID on console_restart(), not hard-coded 0.
1998-09-24 21:12:43 +00:00
27569e4050
Initialize pointer to the boot CPU's interrupt register.
1998-09-24 20:38:43 +00:00
831354d6de
Add `intreg' cpuinfo offset.
1998-09-24 20:37:17 +00:00
e43333b7e7
Move if_ade* from alpha/pci/ to alpha/a12/
1998-09-24 05:36:05 +00:00
09c3723e08
Put back ahc and bha scsi HBA driver configs.
1998-09-24 05:33:41 +00:00
81ea242049
Fix include path, these days a12 header files are in alpha/a12.
1998-09-24 05:32:52 +00:00
ec4de2679b
Track tfs -> ustarfs change.
1998-09-24 05:23:58 +00:00
c69dbb3c28
Actually, yes we do know what the rpb_restart entry point is used for,
...
so delete some #if 0'd code.
1998-09-24 03:39:24 +00:00
7521c309df
When setting up the hwrpb for restarts, use the primary CPU ID from the
...
hwrpb.
1998-09-24 00:30:19 +00:00
7df5ebc392
"Gee, there was already a function to do that."
1998-09-23 22:02:21 +00:00
53d42701b5
Implement a function to recompute the HWRPB checksum.
1998-09-23 21:51:04 +00:00
86f044d10e
Track changes elsewhere in the PCI interface.
1998-09-23 21:20:55 +00:00
55714d5b34
Update for vm_offset_t, vaddr_t sweep.
1998-09-23 21:17:17 +00:00
ddde99135e
A12 crossbar switch driver.
1998-09-23 21:14:58 +00:00
73fdd29a64
A12 detached console tty driver and NetBSD console interface.
1998-09-23 21:14:02 +00:00
58ab38cb69
Use per-CPU interrupt status register.
1998-09-23 11:07:28 +00:00
9eca565a37
Make cgsix_sbus & cgsix_obio dependent on their respective attribute.s
1998-09-23 08:49:46 +00:00
d6746389a4
The nmi_* routines are sun4m-only.
1998-09-23 08:44:51 +00:00
d720002637
Fix a typo in RCS keyword.
1998-09-22 16:23:20 +00:00
7c4c19c768
First pass KNF. This probably needs more work.
1998-09-22 16:01:51 +00:00
aa1cf01930
Express per-processor interrupt registers in a C structure as well.
1998-09-22 13:42:26 +00:00
bd37118769
Dup header.
1998-09-22 13:41:03 +00:00
eca50c1c33
Flush cache after diddling with trap vectors.
1998-09-22 13:40:08 +00:00
1186ba5102
Introduce a `flush entire cache' method.
1998-09-22 13:39:19 +00:00
5afb0e8bcb
Keep the per-processor interrupt status in the cpuinfo structure.
...
For now, map them to the fixed virtual addresses set up early in autoconf.c
1998-09-22 13:08:44 +00:00
5fa16c668b
Define the inter-console communication buffer portion of the per-cpu
...
info structure.
1998-09-22 08:16:51 +00:00
ec49dd71dd
Change 41 separate printf()'s into a table and 2 printf()'s.
1998-09-22 06:24:26 +00:00
6871d2529f
Add missing mb ops.
1998-09-22 06:10:53 +00:00
402a9210a2
Implement quadword atomic test-and-set.
1998-09-22 05:56:52 +00:00
c945760779
sign-extend some operand types which need it.
1998-09-22 05:40:14 +00:00
5b01d45ac4
Add a `-b #' option and logic for locating the secondary boot image via
...
an absolute block address. It's cheating, as the motivation is support for
the libsa ustar tfs `filesystem' and the solution symmetrical to ufs and
cd9660 would have been to teach installboot about tfs. However, it still
would have been different as you can't mount a tfs with the kernel, and
this option gets possibly useful support for any contiguous format, even
completely raw boot images.
1998-09-22 05:03:36 +00:00
e10cc7910d
Add some support for multiple processors to the pmap module. Still left
...
to do: TLB shootdown code, but that will be much easier to write once
the code to spin up the additional CPUs is working.
1998-09-22 03:58:10 +00:00
bc3dce964b
Declare the coda character device functions here.
1998-09-22 03:42:10 +00:00
2a4d75715c
cfs/CFS -> coda/CODA in strings.
...
Move the cdev declaration for the code filesystem to conf.h
1998-09-22 03:40:42 +00:00
1cc6223a9c
More fixup in the signal area.
...
64-bit syscall cleanup.
Add emulation for some new FPU insns: conversion to 64-bit long int and
conditional moves.
1998-09-22 02:48:42 +00:00
5a0ae6393f
Make isa_bs_subregion() work.
1998-09-22 01:47:53 +00:00
f26ab10148
Spring clean this file.
...
Include dev/isa/files.isa and remove all the mess that is now included
in files.isa
1998-09-22 01:45:47 +00:00
9bdaa48cd5
Hey, lets try using arm32/isa/joyvar.h instead of the bebox one ;-)
1998-09-22 01:42:21 +00:00
03d5fdff96
Fix slightly liberal use of #ifdef DEBUG in last commit.
...
If we get a data abort in SVC mode it is BAD and we cannot recover
so we always want to panic.
1998-09-22 01:40:28 +00:00
2ebc36c0fd
Slight edit to previous.
1998-09-22 01:16:48 +00:00
6ce4eb9769
We now use the MI wdc/wd drivers so this code is no longer needed.
1998-09-22 00:44:20 +00:00
4f7b1f2739
Removed icside_io.c
1998-09-22 00:43:18 +00:00
a77e995d18
This file is no longer needed with the rewritten attachment to use the
...
MI wdc driver.
1998-09-22 00:42:40 +00:00
5fb9c16f05
While we are here in alpha/stand, bail out on ^C during boot.
1998-09-22 00:41:13 +00:00
071b4fc4d2
Re-written the wdc attachments to attach to the MI wdc driver instead
...
of the MD one.
1998-09-22 00:40:37 +00:00
10da0cf1c3
Add fs_ops to file_system[] for the ustar-format `tfs'.
1998-09-22 00:39:31 +00:00
4494dc9cfc
Removed MD wdc/wd files.
...
Include dev/ata/files.ata and using dev/ic/wdc.c for everything.
1998-09-22 00:37:51 +00:00
aa9401f832
Fix calculation of I/O range when printing child information.
1998-09-22 00:33:51 +00:00
2671c2fa42
Make bus_dmamap_load_uio() work, from Kevin Lahey <kml@nas.nasa.gov>.
1998-09-21 22:51:56 +00:00
709360e3ce
Fill the `bpp' slot.
1998-09-21 21:13:51 +00:00
bd8b85cdd8
Correct battable[] usage.
1998-09-21 17:16:26 +00:00
d909dcee1c
Do not print, or even compile in, non-fatal diagnostics unless DEBUG is set.
1998-09-21 11:24:11 +00:00
20f2898a0c
Merge sun4 and sun4c version of memerr() again.
1998-09-21 10:32:00 +00:00
af19654e85
We no longer need to access memerr() through a function pointer.
...
GC `cpumod' and `mmumod'.
1998-09-21 10:30:41 +00:00
c3b26811ac
We no longer need to access memerr() through a function pointer.
1998-09-21 10:29:20 +00:00
ad921921e4
Add softserial to the alpha port. This significantly improved PPP
...
throughput on com ports.
1998-09-21 00:33:16 +00:00
ec34e18063
Don't map sbus `registers' on sun4c (i.e. sbus @ mainbus); it's almost
...
certainly not the control space we want..
1998-09-20 20:08:52 +00:00
7a147080b8
Async arguments are no longer passed to the memory fault handler.
1998-09-20 20:01:15 +00:00
4bf750b7df
Add sun4m NMI handlers.
1998-09-20 20:00:09 +00:00
d0d9bb7669
Dedicate a pair of entry points to handling sun4m level 15 (NMI) interrupts.
...
Hardware NMIs are generated on various fault conditions that take place
asynchronously to the instruction stream. Software NMIs are going to be used
for inter-processor communications.
Get synchronous fault information separately from asynchronous fault
information. Do the former right after taking a memory fault trap and
store the values in temporary locations within the cpuinfo structure (XXX),
so we can unconditionally clear the sync fault status register after
MMU probe operations. This all is to work around a Hypersparc feature
which could lead to loss of fault information because of the fault
status register getting locked.
1998-09-20 19:54:48 +00:00
cd8dfa6798
Account for changes in struct cpuinfo & locore
1998-09-20 19:39:18 +00:00
4128057c52
Split memory fault status function into `synchronous' and `asynchronous'
...
versions.
1998-09-20 19:37:50 +00:00
2734182a74
Re-arrange the sun4m cases a bit.
...
Entry points no longer have async arguments.
1998-09-20 19:34:16 +00:00
c3e742adfb
Format string for SI register.
1998-09-20 19:31:37 +00:00
b6da06d637
Name fault registers more like they're referred to in various docs.
1998-09-20 19:29:10 +00:00
9d640ee3ad
Make this compile again, as pointed out by Paul Goyette.
1998-09-20 19:17:38 +00:00
47ca861322
Nuke some unneeded debugging code.
1998-09-20 18:54:03 +00:00
3eaeeb5357
Add definitions for the maximum allowable `whami' procssor ID and the
...
maximum number of processors we'll allow (64, assuming procssor IDs start
at 0).
1998-09-20 18:28:50 +00:00
53f576f788
bus_space_copy_* -> bus_space_copy_region_*
...
Add BUS_SPACE_COMPAT_OLDDEFS for bus_space_copy_* compat.
1998-09-20 03:37:29 +00:00
a1a94bc5fc
Use the expected name for the config attach structure.
1998-09-19 16:50:31 +00:00
0a6347a24d
Provide an error entry point like sbus and memory.
1998-09-19 16:45:43 +00:00
812eb8c1da
Add %b format strings.
1998-09-19 16:44:59 +00:00
25d48215a2
Map Sbus control registers.
1998-09-19 15:49:50 +00:00
8381b55bd7
Add a bunch of SBus control register definitions.
1998-09-19 15:48:55 +00:00
1bcd9d3bbb
Pass the children register space in the attach arguments.
1998-09-19 15:47:18 +00:00
ced4225429
Add `eccmemctl' device.
1998-09-18 20:19:12 +00:00
b3c7ebb7cd
Handle ECC memory control found on a number of machines.
...
Also defines an entry point for memory errors reported by module interrupts.
1998-09-18 20:18:10 +00:00
a0ccc06ec5
Note which units memory sizes are counted in.
...
Fixes half of PR port-i386/6159 ("Heiko W.Rupp" <hwr@pilhuhn.de>).
1998-09-18 12:22:54 +00:00
06753678d5
Remove the chips which are known to identify properly out of the
...
old "match" function - more or less for documentation.
Proposed by "Soren S. Jorvang" <soren@t.dk>.
1998-09-18 11:57:57 +00:00
1d34097b60
Take the Intel SIO into the special case list - it identifies itself
...
as "prehistoric". From John Kohl.
1998-09-18 11:13:10 +00:00
81d435b491
sigh.. put back non-garbage collectible `que' functions.
1998-09-18 08:07:08 +00:00
45c0de8e37
Interrupt handling for the MicroConversions 2124NB II, from Paul Goyette.
1998-09-18 06:08:28 +00:00
6857706407
powerpc/bcopy.c is unnecessary.
1998-09-18 06:04:19 +00:00
7482a84e6a
Be less verbose during various data aborts unless DEBUG is defined.
1998-09-18 04:09:57 +00:00
9f474557fe
Allow boot arguments to override the host id on a per instance basis.
1998-09-18 03:23:19 +00:00
b9a131261c
Define the new sigcontext structure.
1998-09-17 04:54:51 +00:00
2eb8e8729b
Make the signal code look a bit more like the 32-bit SPARC port's.
1998-09-17 04:52:17 +00:00
a7e5b3bcce
For _LP64, sigcontext must contain longs!
1998-09-17 04:51:29 +00:00
5e8f492923
SYS_sigreturn -> SYS___sigreturn14.
1998-09-17 04:41:06 +00:00
dcb541531a
Minor cosmetic change.
1998-09-17 02:33:06 +00:00
c006c7c0da
Sync w/ sendsig().
1998-09-17 02:30:02 +00:00
e5ea525b9f
Slight brain'o in last.
1998-09-17 02:26:26 +00:00
5bc9dafaee
Minor cosmetic change to sendsig().
1998-09-17 02:24:56 +00:00
cc485c1a08
Catch up with changes to signal delivery.
1998-09-17 02:01:59 +00:00
7083b63277
Back out previous; I'm punting PowerPC to tsubai or sakamoto.
1998-09-16 23:51:27 +00:00
ef3f4d39df
Need 103 longs for jmp_buf now (128-bit signal mask, at the front of the
...
jump buffer).
1998-09-16 23:33:18 +00:00
3d4e54f11f
Need 87 longs for a jmp_buf now (we use sigcontext, which grew).
1998-09-16 23:15:08 +00:00
7b32475079
Define the new sigcontext structure.
1998-09-16 23:14:15 +00:00
6385066c76
Need 13 longs for jmp_buf now; 128-bit signal mask.
1998-09-16 23:13:57 +00:00
95807e512a
Garbage collect unused 3rd parameter to comprobe1().
1998-09-16 21:30:58 +00:00
59e5588098
Map the per-CPU counter registers into each cpu info area.
1998-09-16 13:39:48 +00:00
49b5114713
Make all cpu info structures accessible through an array `cpus[_MAXNCPUS]'.
1998-09-16 13:36:23 +00:00
43f5b65e23
Define the new sigcontext structure.
1998-09-15 23:14:40 +00:00
a034a22862
Need 21 longs for jmp_buf now, due to 128-bit signal mask (and use
...
of the sigcontext structure in the jmp_buf).
1998-09-15 23:06:41 +00:00
543070847c
Can't afford a 1K buffer in the data segment.
1998-09-15 20:03:50 +00:00
573d1d344f
Add the DrHw value for the MicroConversions 2124NB II display adapter,
...
from Paul Goyette.
1998-09-15 16:09:44 +00:00
0ad1257add
sub-arch protection.
1998-09-15 13:12:25 +00:00
f1c16a1b25
Oops, forgot this one in the vmebus renaming (Julian Coleman).
1998-09-15 10:45:11 +00:00
fb38024157
Use `swap' to install page-table entries which is recommended practice
...
for MP configurarions.
1998-09-14 22:45:36 +00:00
1736bda754
Define `swap'.
1998-09-14 22:43:29 +00:00
dbebd9b148
Need 13 longs for jmp_buf; signal mask is 128 bits now.
...
XXX Actually, libc appears to use only 7 of the previous 10, so increasing
the size isn't actually necessary! But there was a gap at the end before,
so we'll keep it.
1998-09-14 21:31:52 +00:00
e30eafbbc6
Need 29 longs for jmp_buf now; signal mask is 128 bits.
1998-09-14 18:06:01 +00:00
d8ea31db0f
Improve initialisation of the Crazy Dots card. (Julian Coleman)
1998-09-14 14:25:38 +00:00
0a46abfd42
Collect redundant code into cpu_setup().
1998-09-14 10:37:12 +00:00
b1b69e4195
Fix cache bit confusion in pmap_alloc_cpu().
1998-09-14 09:46:11 +00:00
0b09668693
Fix typos in signal rework (sc.regs -> sc-regs, rege -> regs).
1998-09-14 07:04:06 +00:00
a4a356f9a6
Need 83 longs for a jmp_buf now.
1998-09-14 06:07:29 +00:00
27f3588d7b
oops, missed one.
1998-09-14 02:50:12 +00:00
cbfc257eda
sigset13_t -> int.
1998-09-14 02:48:33 +00:00
058853ee30
Use WARNS=1 to get -Wall, and properly disable -Wmain on gcc 2.8
1998-09-14 00:50:22 +00:00
7010f82942
Sync with "GENERIC".
1998-09-13 23:15:46 +00:00
43c45ee409
Enable gre(4) device
1998-09-13 21:02:02 +00:00
ff383dc20d
Add compat_13_machdep.c
1998-09-13 20:34:34 +00:00
190e4c429d
Move compat_13 sigreturn() into its own file.
1998-09-13 20:33:33 +00:00
82d2ea3a70
Remove left-over SUNOS_COMPAT line.
1998-09-13 20:24:15 +00:00
9658554e18
Replace previous by something more complete.
1998-09-13 20:17:54 +00:00
9d9f22fa79
Signal handling changes: sunos compat gets its own sendsig(); sunos
...
sigreturn() == compat_13_sigreturn().
1998-09-13 20:07:54 +00:00
52cbf86859
Looks like something else changed in signal land.
1998-09-13 16:45:43 +00:00
49af63b22b
Fixup signal changes (hopefully). However SUN_COMPAT is likely broken by
...
this and I don't know how to fix it.
We can now exec a 64-bit init through a really ugly hack (don't ask.)
1998-09-13 16:02:47 +00:00
06fb1b6d67
Fix pasto.
1998-09-13 12:24:18 +00:00
4e4f120db9
Update these for signal handling changes.
...
XXX Not tested yet.
1998-09-13 12:13:49 +00:00
7b15b3b56d
Minor change.
1998-09-13 12:01:41 +00:00
fa31b94af9
Fix omission in previous; remember to record that we're on the signal stack.
1998-09-13 11:57:58 +00:00
90054fd502
New sigcontext.
1998-09-13 11:41:02 +00:00
ba67f63901
Sync function prototypes; remove unsed variables.
1998-09-13 11:34:04 +00:00
ef7c8ebbe7
Oops; forgot to commit this.
1998-09-13 11:26:58 +00:00
b8de221a1e
Pull in <sys/syscall.h> directly into locore.s
1998-09-13 11:12:36 +00:00
4a797b8f45
Make signal delivery work again.
1998-09-13 10:29:02 +00:00
c7d391b23c
Make signal delivery work again.
1998-09-13 09:15:51 +00:00
1a5b3601cb
Make signal delivery work again.
1998-09-13 08:19:49 +00:00
35c106630e
__LIBCxx_SOURCE__ refers to the library major number, not the NetBSD release
...
number.
1998-09-13 02:18:38 +00:00
3ddf828326
Make signal delivery work again.
1998-09-13 01:51:29 +00:00
6351312ff7
Fix thinko in last thinko fix. We always have to store an old style
...
signal mask since a 1.3 binary may attempt to invoke sigreturn(2) directly
for an alternate exit from the signal handler. If we don't do this, it will
get a garbage signal mask if it tries to do that.
1998-09-13 01:45:04 +00:00
7f361cc70c
Prototypes for native_sigset13_to_sigset() and native_sigset_to_sigset13()
...
are in sys/signalvar.h
1998-09-13 01:43:17 +00:00
a0494141c5
Prototype for native_sigset13_to_sigset() is in sys/signalvar.h
1998-09-13 01:42:45 +00:00
875bff538c
A few slight optimizations.
1998-09-12 19:50:59 +00:00
ad0f4a6fbb
Nuke `insqeu' and `remque'
1998-09-12 19:46:00 +00:00
8b7ee2cd89
Add hatching code for other CPUs.
1998-09-12 19:44:17 +00:00
dfc0d8e7d5
{bzero, bcopy} -> {memset, memcpy}
...
add -DINSECURE to stand/Makefile.inc
1998-09-12 19:14:58 +00:00
e120fa4e14
Machinery to configure multiple CPUs. All CPUs found are spun up from the
...
auto-configuration cpu_attach() function using the firmware.
Currently, all CPUs except the one used to boot end up in an idle loop
in locore.
1998-09-12 15:33:40 +00:00
1b077ae1cd
Set cache control bits according to configured preference (if any).
1998-09-12 15:08:04 +00:00
0aa47cd025
Change cfs/CFS in symbols, strings and constants to coda/CODA
...
to avoid fs conflicts.
1998-09-12 15:05:47 +00:00
097a922a9c
Add field holding the physical address of the MMU context table.
1998-09-12 14:12:49 +00:00
f390eccd7d
Add missing bits to per-CPU MMU table allocator routine.
1998-09-12 14:11:53 +00:00
cd0a5fe245
Define some bit-format strings.
1998-09-12 13:59:19 +00:00
18fbdfc2f8
Expose `v3' routines to everyone.
1998-09-12 13:34:38 +00:00
3f2c7263b1
Fix thinko in previous.
1998-09-12 10:48:27 +00:00
2b636564b7
Don't add IOBase to sccA; it's an address, not an offset.
...
Pointed out by Paul Goyette.
1998-09-12 02:42:27 +00:00
89ea1fcbdd
Version sys_sigreturn, to avoid breaking programs that use it explicitly.
1998-09-12 00:47:12 +00:00
a4f0d3aef0
Add splx_end label to splx(), for stack traceback code.
1998-09-11 17:37:46 +00:00
008816ea4f
Changes to sys/arch/mips from ARC port, from Noriyuki Soda <soda@sra.co.jp>.
...
Adds (most) support for ARC platform to port-independent mips code.
Some changes (e.g., clean up of overlapping CPU/FPU ids) inspired by
comparison to the OpenBSD 2.1 codebase of Soda's ARC port.
Open issues:
* Still no support for r4600 or mipsIV CPUs with two-way L1 cache.
Code derived from Per Fogelstrom's OpenBSD source doesn't work
on mips3 pmaxes with L2 cache.
* Still some port-specific #ifdefs, for interrupt enable and
pmax L2 cache-size. Needs more thought, but overlaps with
work-in-progress by Tohru and Tsubai on spl()s and related stuff.
1998-09-11 16:46:31 +00:00
62ea009b0e
Update for signal handling changes.
1998-09-11 13:31:39 +00:00
a2d9c7ed82
Use the context flag bits.
1998-09-11 13:22:45 +00:00
fb526e055c
Substantial signal handling changes:
...
* Increase the size of sigset_t to accomodate 128 signals -- adding new
versions of sys_setprocmask(), sys_sigaction(), sys_sigpending() and
sys_sigsuspend() to handle the changed arguments.
* Abstract the guts of sys_sigaltstack(), sys_setprocmask(), sys_sigaction(),
sys_sigpending() and sys_sigsuspend() into separate functions, and call them
from all the emulations rather than hard-coding everything. (Avoids uses
the stackgap crap for these system calls.)
* Add a new flag (p_checksig) to indicate that a process may have signals
pending and userret() needs to do the full (slow) check.
* Eliminate SAS_ALTSTACK; it's exactly the inverse of SS_DISABLE.
* Correct emulation bugs with restoring SS_ONSTACK.
* Make the signal mask in the sigcontext always use the emulated mask format.
* Store signals internally in sigaction structures, rather than maintaining a
bunch of little sigsets for each SA_* bit.
* Keep track of where we put the signal trampoline, rather than figuring it out
in *_sendsig().
* Issue a warning when a non-emulated sigaction bit is observed.
* Add missing emulated signals, and a native SIGPWR (currently not used).
* Implement the `not reset when caught' semantics for relevant signals.
Note: Only code touched by the i386 port has been modified. Other ports and
emulations need to be updated.
1998-09-11 12:50:05 +00:00
932a812de4
Speed up syscall() slightly in a few cases.
1998-09-11 12:23:44 +00:00
526dbbab7e
Add labels for the compat_sparc32 signal trampoline and break -- er -- fix
...
suword and fuword.
1998-09-11 00:16:59 +00:00
6736de02e8
A (slightly modified) version of tv's fix for va_args for kern_printf.
1998-09-11 00:12:41 +00:00
97acdd4415
A minor error. kn5800, a MIPS SMP machine, was codenamed "ISIS."
1998-09-11 00:06:12 +00:00
f3ca996011
Add support for 64-bit types if _LP64 is defined.
1998-09-11 00:05:57 +00:00
cdeacb83c2
Don't use fuword()/suword() -- can't count on their size.
1998-09-11 00:04:16 +00:00
9d1c9d8d38
Use correct devices for zs driver on AVs. From Dave Huang (PR 6107).
1998-09-10 21:40:42 +00:00
f6b7ca884e
Use our brand new extent_alloc1() function to allocate cache-aligned
...
DVMA addresses.
1998-09-10 21:08:39 +00:00
283229c668
Fix catastrophic typo. DraCos rev. 3 (or older) would crash on exiting from
...
the first timer interupt.
1998-09-10 20:45:33 +00:00
d6afdbc88b
Complete to fix errors introduced by HX screen dimension detection.
1998-09-10 10:00:39 +00:00
84f15d23f4
Fix bug in switch_exit() from last commit. This fixes PR 6132.
...
The bug is that the modification to call exit2() removed a stack pop
but not the associated push.
1998-09-10 02:16:28 +00:00
eefa9491d1
Turn on support for 115,200 and 230,400 baud. Should work, but might
...
generate lots of interupts (one per char or so) if we don't have
DMA set up.
1998-09-09 20:58:06 +00:00
feb70ddafd
Add coda file system character file device.
1998-09-09 19:04:04 +00:00
6b6b9e2706
Make device probe/attach sessions to be executed at splhigh.
...
mha driver used interrupt driven I/O.
1998-09-09 16:42:51 +00:00
70e641047c
In cpu_coredump(), use MID_MACHINE rather than MID_* (whatever it expands
...
to).
1998-09-09 11:17:24 +00:00
2f9d1a8c8c
Use MID_MACHINE rather than MID_SPARC in cpu_coredump(), and add a comment
...
about dumping a SPARC32 core file if we're using emul_sparc32.
1998-09-09 11:06:08 +00:00
f7a4380174
If _LP64, set MID_MACHINE to MID_SPARC64, else MID_SPARC. This allows us
...
to uniquely identify ILP32 vs. LP64 core files, and prevents an LP64 kernel
from incorrectly choosing emul_netbsd when it should choose emul_sparc32.
1998-09-09 11:01:38 +00:00
2a6ae85fc3
Change to MACHINE_ARCH=sparc64 for LP64 machines.
1998-09-09 02:56:38 +00:00
d2570e248c
Don't use %tick for microtime on 32-bit kernels -- breaks gettimeofday.
1998-09-09 02:52:54 +00:00
e81ed2237d
Fix problems in global pagewalks.
1998-09-09 02:49:56 +00:00
9487c4be35
Make `machine phys' increment its address.
1998-09-09 02:48:15 +00:00
8abe0d6b1c
Adjust for the new "reaper" kernel thread: do not free the vmspace and
...
u-area in machine-dependent code. Instead, call exit2() to schedule
the reaper to free them for us, once it is safe to do so (i.e. we are
no longer running on the dead proc's vmspace and stack).
1998-09-09 00:07:48 +00:00
ba78af57df
Get ready to add Coda
1998-09-08 20:56:08 +00:00
drochner