db783e76e8
Use explicitly sized types for entities that exist on disk.
...
Use alpha-like defines for boot block offset on disk and boot block size.
1999-11-27 01:51:20 +00:00
b83882f7c7
Use new pmax stand structure for multi-filesystem bootblocks. All
...
entries are commented out for now until everything else is updated.
1999-11-27 01:45:46 +00:00
69e1252d6a
Oops, px* won't work right now - go back to px0.
1999-11-27 01:31:47 +00:00
0b1eae6c7a
* all device attachments, after discussion with Jason Thorpe and Toru
...
Nishimura.
1999-11-27 01:19:31 +00:00
6f6045c97d
Regen.
1999-11-27 01:03:33 +00:00
8c5ab0744f
IBM cards update.
1999-11-27 01:03:18 +00:00
1d9d2c47c5
In pmap_emulate_reference(), always or in the bits. I know the code is trying
...
to be clever, but...
Also, a slight optimization for the write case.
1999-11-27 00:25:15 +00:00
f26df92bed
Fix bugs in pmap_protect() that were responsible for the `ld.elf_so lossage'.
...
* We could overrun the eva by as much as L1SEG_SIZE-PAGE_SIZE.
* sva was advanced *twice* for each valid l3 or l2 page, causing it to get out
of sync with the PTE pointers.
1999-11-26 23:04:33 +00:00
2aea14c604
Clear B_AGE in bdirty(), this buffer must go through the LRU again
...
to be back on the AGE queue. Otherwise we risk recycling a set
of buffers with (soft) dependencies on the AGE list, which may
last forever if the vnode they belong to is locked (i.e. the syncer
won't get to the buffers they depend on, so their dependencies
are never flushed).
1999-11-26 17:18:15 +00:00
506836faa1
Regen.
1999-11-26 17:17:21 +00:00
71f7530292
Add two 3Com modems.
1999-11-26 17:16:53 +00:00
8f56b89950
More WDCDEBUG_PRINT.
1999-11-26 12:39:43 +00:00
97fc004770
Don't complain when umodemstartread() returns USBD_IN_PROGRESS. It's normal.
1999-11-26 09:12:50 +00:00
d94a5b55fb
Make timeout device exploration optional in debug mode.
1999-11-26 01:41:03 +00:00
77bb4d8ce2
Cosmetic change.
1999-11-26 01:40:01 +00:00
aa32088c20
Cosmetic changes.
1999-11-26 01:39:27 +00:00
240991073c
Generate an error message when attachment fails.
1999-11-26 01:38:40 +00:00
14d940c179
Jens, not Joerg
1999-11-25 22:11:03 +00:00
5a05d40012
Address range scaling is hidden by the bus_space functions. Correct the
...
definitions in case we ever do bus_space accounting on Amiga.
1999-11-25 21:58:57 +00:00
366a09427a
Add a few boards we know about.
...
This should really be table-driven and optional.
1999-11-25 21:57:45 +00:00
57ac5a3ea7
Another RTL8019 board: X-serve by Individual Computers Jens Schoenfeld.
1999-11-25 21:53:01 +00:00
df61f0409e
From the 68040 User Manual, page 4-10:
...
"To fully support self-modifying code in any situation, it is imperative that
a CPUSHA intrcution is executed before the execution of the first self-modified
instruction. The CPUSHA instruction has the effect of ensuring that there is
no stale data iin memory, the pipeline is flushed, and instruction prefetches
are repeated and taken from external memory."
I verified that this is the only way (I can think of) to make the sigtramp
regression test work on 68040. doing cpushl dc; cinvl ic; over the affected
address range, then nop (to synchronize the pipeline) is not enough; apparently
the nop does not FLUSH the pipeline and prefetch...
Note that the 68060 UM has copied the above cited passage, but in fact this is
not true. This might be connected to the fact that the 68060 does ensure
memory access order under most conditions.
1999-11-25 20:30:38 +00:00
6783a346b9
Fix date in copyright string.
1999-11-25 16:40:19 +00:00
249aa2e089
Target `machine' symlink explicitly at the sparc64 headers.
1999-11-25 14:46:08 +00:00
e0118ca933
Suppress the `machine' symlink when making target `obj'.
...
Also add it to the clean target list.
1999-11-25 13:27:30 +00:00
b797a06151
Make symlink to appropriate header directory and have cpp use it.
1999-11-25 13:25:09 +00:00
dcba4f5e10
use a portable invocation for cc -E
1999-11-25 06:06:03 +00:00
ca66e6b619
- pass slot number to sbus_get_intr() as a new argument.
...
- in sbus_get_intr(), if we are not an onboard device (ie, sbus card),
encode the slot number into the sbi_pri so that we can later extract
it and use it to find the interrupt map & clear registers for this
device.
- remove "intr" support as it is really pre-sun4u only.
- don't "pause" for so long in sbus interrupt debug messages..
with the slot number being passed back from sbus_get_intr(), the FS/BE
card in an ultra2 now appears to get interrupts and gets beyond
waiting for the scsibus probe!
1999-11-25 05:03:53 +00:00
36e75e7449
Some fix on comment descriptions.
1999-11-25 02:53:46 +00:00
94b897d4bf
Reorder device descriptions to reflect what kernel shows on screen,
...
mostly in address ascending order.
1999-11-25 02:48:12 +00:00
353ca54019
Move memory sizing to a new function memsize_scan(), and add an empty
...
stub for memsize_bitmap() to use the PROM bitmap for memory information.
Add a memsize function pointer to the platform structure, and make all
existing DECstation models use memsize_scan() for now.
Interestingly, from the Ultrix cpuconf.{c,h} only the 3100 and 5400 use
a memory scan to determine available memory - all other models use the
PROM bitmap...
1999-11-25 01:40:22 +00:00
961d4d6ad2
Change CS4297 id entry.
1999-11-24 23:21:01 +00:00
df60fd6eac
Regen.
1999-11-24 23:18:07 +00:00
ae1dcc2dc0
Comment out some entries for Entrega serial adapters. These entries
...
are only relevant before firmware download.
1999-11-24 23:17:27 +00:00
c156651eb9
Avoid the special when disconnecting devices with no config descriptor.
...
It was wrong.
1999-11-24 23:14:39 +00:00
bb2a9b3008
Add some more debug printing.
1999-11-24 23:13:19 +00:00
2454426afe
Take a cue from the i386 port: Enable DHCP by default, rather than
...
BOOTP.
1999-11-24 22:01:19 +00:00
cfabac64f5
fix vm_page initialization for the case where kernel+symbols+tables
...
exceed 16M
1999-11-24 18:32:50 +00:00
b1f2453dee
add a diagnostic panic to catch illegal memory ranges passed to
...
uvm_page_physload()
1999-11-24 18:28:49 +00:00
93d33f5806
Wildcard 3max {asc,le}0 at tc attachment.
1999-11-24 02:25:37 +00:00
635d546dd9
Specify the locators for everything.
1999-11-24 02:10:47 +00:00
4d7bdecfce
My 3MAX's config file.
1999-11-24 02:05:40 +00:00
7fa174a09e
Specify all the locators for the various devices.
1999-11-24 02:05:12 +00:00
d4cf67e2d2
s/CEXTRAFLAG/CEXTRAFLAGS/ so it works.
1999-11-24 01:54:34 +00:00
abc579187f
prefix a variable with "pci_"
1999-11-24 01:53:38 +00:00
05715b1dbd
Attach asc0 and le0 at tc 5 and 6 respectively - 5000/200 now works again.
...
XXX: Should the turbochannel slot numbers be wildcarded or hardcoded?
It's not as if they can appear anywhere else...
1999-11-24 01:52:06 +00:00
6a03465ac4
Don't check for additional dc instances yet.
1999-11-24 01:43:38 +00:00
11ea81b1c2
Delete now-unreferenced files.
1999-11-24 01:18:13 +00:00
d6a69159ca
Fix tyop in comment.
1999-11-24 00:18:37 +00:00
298f4b27f4
Make separate device lists for the 3100 and 5100, and add a way to probe
...
for optional `dc' devices on the 5100.
1999-11-24 00:04:06 +00:00
d901f6eae0
Be more careful to block bio interrupts for some data structures. There
...
were at least a few missed cases where vp->v_{clean,dirty}blkhd were
unprotected since the softdep/trickle sync merge.
1999-11-23 23:52:40 +00:00
881d3f4735
A little cosmetic.
1999-11-23 20:36:10 +00:00
98e19f8e0e
Add an `addr' locator to the `ibus' bus. This allows you to wire down
...
unti numbers on systems which have e.g. multiple `dc' devices on the
internal bus (like the 5100).
1999-11-23 20:07:34 +00:00
761038f279
Correct the test for a free-slot for isa_intr_alloc(). Also issue a warning
...
that should make it clear in which slot the card is expected to be in.
Isapnp is not what it seems to be on the atari (where interrupts are
hardwired to slot numbers).
1999-11-23 14:48:58 +00:00
c48182e1ae
Add missing `major' entries: md and fd.
1999-11-23 14:17:09 +00:00
a09d3191a0
Remove leading '/' from pathnames, using same logic as ufs.c. Allows new
...
style (but not yet committed) pmax bootblocks to open "/boot.pmax" on an
ISO image. Same problem reported for NFS by Jason Thorpe.
1999-11-23 12:20:53 +00:00
2e175b3f88
Avoid 0 blocksize.
1999-11-23 08:38:30 +00:00
6378e492c1
RAMDISK = GENERIC + md
1999-11-23 05:08:25 +00:00
d617933e27
Round out our options with 4bpp framebuffer support, conditional
...
on RCONS_4BPP.
1999-11-23 01:52:52 +00:00
e9c570ec77
Now make an ofwboot.xcf, and XCOFF version of ofwboot. Uses the new
...
fix-coff program.
1999-11-23 01:35:37 +00:00
cd6e26a395
Add fixcoff, a program to be used during a build to help make xcoff'
...
binaries from elf ones.
1999-11-23 01:32:37 +00:00
17971be39a
Don't used extern on uhcidebug and ohidebug variables.
1999-11-22 21:57:09 +00:00
e55cd100f8
minor stylistic change
1999-11-22 19:15:12 +00:00
5d1658a740
don't prototype Debugger() here, including <sys/sytm.h> is enough
1999-11-22 19:05:32 +00:00
5b50e62cbb
don't prototype Debugger() here, i't done in <sys/systm.h>
1999-11-22 19:01:50 +00:00
b9d5c93b1c
Debugger() --> cpu_Debugger(), include <sys/sytm.h> for it's prototype
...
remove obsolete comment
1999-11-22 19:00:57 +00:00
9986dd3f7d
Debugger()/cpu_Debugger() is always available and always defined/prototyped
...
in <sys/systm.h> for sun3/sun3x, even in non-DDB case
1999-11-22 18:34:00 +00:00
aca868ca69
previous is true even for sun3x
1999-11-22 18:05:41 +00:00
a0d86c452f
sun3 has cpu_Debugger() and hence Debugger() available even in non-DDB case
1999-11-22 16:53:59 +00:00
1acee6a50f
Remove D-I cache synchronization code in setregs(). MI part has it now.
1999-11-22 13:31:44 +00:00
668b553d53
Need opt_compat_netbsd.h.
1999-11-22 13:26:59 +00:00
82d9324e38
Remove duplicate IPv6 options.
1999-11-22 08:14:05 +00:00
0cea637239
merge SHARK.v6 into SHARK.
1999-11-22 05:17:33 +00:00
17d170b1ca
defopt COM_DEBUG, COM_HAYESP, and COM16650
1999-11-22 03:53:38 +00:00
1cf30597ea
forgot to change 'VRKIU_LAYOUT' to 'PCKBD_LAYOUT'.
1999-11-22 02:14:30 +00:00
49ead2a4a7
add RCS Id.
...
add copyright & license notice.
1999-11-22 02:11:09 +00:00
3e16beaf22
Add a bunch of "__attribute__((__packed__))"s
...
to get along with the ELF compiler.
1999-11-22 01:14:55 +00:00
bb2093f24a
Initialize i_ffs_effnlink, so every file doesn't look like it's already been
...
deleted for the purpose of dirops (particularly create and mkdir). Addresses
PR#8815.
1999-11-21 19:25:31 +00:00
58f7417063
Call the machine dependent code to do d-cache/i-cache synchronization, for
...
architectures that need it. Without this, at least on Motorola 68040 and 68060
machines, the sigtramp regression test fails.
1999-11-21 17:04:05 +00:00
633fd1e1cc
Check presence of Sbus interrupt properties before using them.
1999-11-21 15:23:01 +00:00
d5a471ccc9
Check presence of Sbus interrupt properties before using them.
...
Only one case is known to trigger this omission: a Sparc Classic
configured as X terminal.
1999-11-21 15:01:50 +00:00
e9a0023b37
bring in content of GENERIC.v6 into GENERIC.
...
remove GENERIC.v6 file (as it is part of GENERIC now).
"faith" interface is commented out by default as it is not really for
general use.
IPsec items are commented out as well, though we can enable "options IPSEC"
without export-related issue ("options IPSEC" will enable authentication
portion only). We may need to think about it again.
if you have problem compiling with INET6 on archs I do not have access to,
please contact me.
XXX what to do with arch/arm32/SHARK{,.v6}?
1999-11-21 14:00:37 +00:00
312ac4e1e1
add scan code mapping for
...
IBM WorkPad z50
NEC MobilePro 770, 800
Sharp Tripad PV6000 / Vadem Clio
NEC MC-CS series
Fujitsu Intertop CX300
change keyboard layout according to model(default).
add options PCKBD_LAYOUT to override default.
1999-11-21 12:53:57 +00:00
a16b5d0ff6
Regen.
1999-11-21 12:49:07 +00:00
26fe8d79e2
regen.
1999-11-21 12:48:44 +00:00
85bb334fd0
add IBM WorkPad z50
1999-11-21 12:48:25 +00:00
69af3df31f
add MCCS comctrl (GPIO 14)
...
add IBM WorkPad z50
1999-11-21 12:47:33 +00:00
40fbdc840c
add wscons to compile
1999-11-21 12:46:51 +00:00
d92a868bcf
Avoid unused symbol warnings when not using DDB.
1999-11-21 11:47:51 +00:00
a4e956ce77
Also pull in <pci/pciidereg.h>.
1999-11-21 11:17:35 +00:00
cad52c9e08
Add a entry for Mobile Dock 2, which is 2.5" HDD adapter.
1999-11-21 10:13:08 +00:00
3abbbd219e
Add entries for Mobile Pro 770(MC-R520A) and Mobile Pro 800(MC-R700A).
1999-11-21 07:58:49 +00:00
4c747fe97d
TX3912/3922 support
1999-11-21 07:04:31 +00:00
fe6ca23b78
add new function vr_fb_init, vr_mem_init.
1999-11-21 07:01:54 +00:00
5bd99e89d8
add fb_init, mem_init member to struct platform.
1999-11-21 06:59:41 +00:00
0816e8d336
when frame buffer address is not specified, don't try to access.
1999-11-21 06:53:21 +00:00
9a758aab34
PLUM2(TC6358TB) TX3922 companion chip
1999-11-21 06:50:26 +00:00
a8b695c150
ITE IT8368E PCMCIA controller
1999-11-21 06:48:58 +00:00
480704756f
Compaq C-series keyboard driver
1999-11-21 06:48:02 +00:00
6326e09f77
PLUM2-ISA bridge
1999-11-21 06:46:02 +00:00
2277dc3475
Move KERNBASE down from 0xf8000000 to 0xf1000000, just beyond the PROM.
1999-11-21 00:17:18 +00:00
1760a4ef69
Toshiba TX3912/3922 internal modules.
1999-11-20 19:56:31 +00:00
1b4b351fab
allow to handle > 512MByte physical address
1999-11-20 19:44:30 +00:00
041804dc8e
Add base offset to rend
1999-11-20 19:40:58 +00:00
a65648a323
regen
1999-11-20 18:32:31 +00:00
35b90fb812
add Xircom CE3 10/100 Ethernet
1999-11-20 18:32:08 +00:00
9b628a6223
Add handler for T_FLUSHWIN trap in case old code makes use of it.
1999-11-20 18:12:00 +00:00
97b34de711
Limit buffers to 1/4 of the kernel address space.
1999-11-20 18:10:44 +00:00
18fefbe895
Add softdep option.
1999-11-20 18:09:52 +00:00
6daa33d3fe
Install NetBSD/sparc64 headers on NetBSD/sparc systems.
1999-11-20 16:35:24 +00:00
62d5d129d5
- merge CATS.v6 to CATS
...
- add UCONSOLE
- remove XSERVER (it only uses in shark/pccons.c?)
1999-11-20 07:28:35 +00:00
c58149afb8
merge GENERIC.v6 to GENERIC
1999-11-20 07:18:59 +00:00
40f7514028
Introduce wscons vsxxx mice (and possible tablet) routines; changes
...
of existing codes (lk201_ws.c, zskbd.c, and zsms.c) will follow.
1999-11-20 04:55:30 +00:00
f73590bbf0
Print the PnP id of unknown codecs.
1999-11-20 01:16:15 +00:00
14896709bf
Join two lines in the attach message.
1999-11-20 01:15:25 +00:00
7b92ed07bd
Propagate the USB revision number to the usb driver.
1999-11-20 00:57:08 +00:00
046d593425
Add the `packed' attribute to structures which describe wire protocol data.
1999-11-20 00:37:58 +00:00
d07a6cf8e4
pull across fix from dec_3000_500.c:
...
>split the "asc" and "tcds" searching into two separate sections and
>keep a "tcdsdev" of the booted tcds device. make sure that the "asc"
>is the child of the tcds. this fixes boot device detection on dec
>5000/400 (prolly 400-900) machines in the presense of a tcds option
>card, which would use the right tcds chip & disk scsiid of the last
>attached tcds -- which meant it would choose the wrong disk, or not
>find the boot device at all if the corresponding scsiid was unused in
>the last attached disk.
>
>XXX: this may need to be copied to dec_3000_300.c but i have no idea
>as i can not test this hardware at all...
>
>fixes PR#8771 by myself.
1999-11-20 00:01:14 +00:00
83c33f4fee
Fix typo in comment. From Brad <brad@openbsd.org>
1999-11-19 23:50:21 +00:00
351a7de621
Get symbol "NETISR_IPV6". This fixes PR#8790, but in a different way.
1999-11-19 22:09:55 +00:00
7e650509f4
Include param.h instead of types.h, to get mem* macros on vax.
1999-11-19 22:07:12 +00:00
e1ed9178a1
Add the `packed' attribute to structures which describe wire protocol
...
data formats.
1999-11-19 20:41:19 +00:00
7479d29f00
Make the ThunderLAN and VIA Rhine drivers use the common MII bit-bang module.
1999-11-19 18:27:18 +00:00
f1ba0d46a3
Regen.
1999-11-19 18:26:22 +00:00
55495ae2e9
Add OUI for Enable Semiconductor.
1999-11-19 18:26:09 +00:00
0c3eefb6a5
Add a basic CardBus front-end for the `tlp' driver. Still more work to do.
1999-11-19 18:23:35 +00:00
9ed17102f4
- Use the common MII bit-bang module.
...
- Add support other than 128-byte SROMs.
- Add support for the 21142/21143 MII.
1999-11-19 18:22:42 +00:00
dc5a586c1c
Use the common MII bit-bang module.
1999-11-19 18:17:14 +00:00
b5fd53184a
Add the mii_bitbang attribute to the elink3 and tlp drivers.
1999-11-19 18:16:13 +00:00
d7496546b5
try to do a better job of figuring out the EEPROM size; the old code
...
didn't work on (some?) 557-based cards
1999-11-19 15:19:14 +00:00
a15ba40c30
Bump __NetBSD_Version__ to match osrelease.sh. Thanks Bernd :)
1999-11-19 13:32:39 +00:00
89e847a90f
kernel interface changed, bup version number (what will come after
...
1.4Z ? :)
1999-11-19 13:05:06 +00:00
9f1959ab2b
split the "asc" and "tcds" searching into two separate sections and
...
keep a "tcdsdev" of the booted tcds device. make sure that the "asc"
is the child of the tcds. this fixes boot device detection on dec
5000/400 (prolly 400-900) machines in the presense of a tcds option
card, which would use the right tcds chip & disk scsiid of the last
attached tcds -- which meant it would choose the wrong disk, or not
find the boot device at all if the corresponding scsiid was unused in
the last attached disk.
XXX: this may need to be copied to dec_3000_300.c but i have no idea
as i can not test this hardware at all...
fixes PR#8771 by myself.
1999-11-19 10:49:46 +00:00
3a220103e8
Adapt printf format for 64bit stats counters.
1999-11-19 10:42:48 +00:00
f86517a031
Update protocoles and interfaces stats counters to 64bit.
...
RTM_IFINFO is now 0xf, 0xe is RTM_OIFINFO which returns the old (if_msghdr14)
struct with 32bit counters (binary compat, conditioned on COMPAT_14).
Same for sysctl: node 3 is renamed NET_RT_OIFLIST, NET_RT_IFLIST is now node 4.
Change rt_msg1() to add an mbuf to the mbuf chain instead of just panic()
when the message is larger than MHLEN.
1999-11-19 10:41:41 +00:00
c090b6a417
add comments
...
XSERVER
INSECURE
SOFTDEP
1999-11-19 06:25:11 +00:00
b7af02bb1b
defopt SOFTDEP
1999-11-19 05:49:53 +00:00
95d4e16c43
Remove function declarations already declared in ibusvar.h and
...
fix typo in dec_3100_intr_*() declarations.
1999-11-19 04:34:01 +00:00
7be83cbb7c
Oops, I misspelt a macro name.
1999-11-19 03:54:08 +00:00
dad420bf58
Move declarations of 3100/5100 ibus interrupt establishment routines
...
to ibusvar.h
1999-11-19 03:15:28 +00:00
682b4e3665
Include SCSI version of disk in device display.
1999-11-19 03:14:22 +00:00
af2a80f51c
Show the SCSI version of the tape drive. Also, when printing out info
...
about the tape drive, only use one ``printf("\n");'' at the end rather
than having lots of \n's.
1999-11-19 03:04:39 +00:00
1d740db7d2
Not all platform have devices which need isadma. Make the isa_dmainit
...
call conditional.
1999-11-19 02:40:25 +00:00
9dacfe6b24
Don't need extern with function declaration.
1999-11-19 02:35:40 +00:00
1dd2a74d0a
Only all the kbd/mouse init functions if NRASTERCONSOLE > 0.
1999-11-19 02:17:01 +00:00
88673ee539
Only call tcfb_cnattach() if NRASTERCONSOLE > 0.
1999-11-19 02:16:06 +00:00
253ea37824
Include "opt_dec_{3,5}100.h" so we know what models are
...
configured. Also fix prototypes for dec_3100_intr_establish()
and dec_3100_intr_disestablish().
1999-11-19 02:11:47 +00:00
adf0157d64
Fix system type case analysis error; pointed by John.P.Darrow@wheaton.edu.
1999-11-19 01:28:08 +00:00
090c4d2e66
Program to convert back and forth between PPM and CHRP boot icon images.
1999-11-19 00:43:20 +00:00
3386c68b46
Cosmetic changes and some small improvements. From FreeBSD and Nick Hibma.
1999-11-18 23:32:25 +00:00
simonb