exceptions, which puts the address of the instruction we faulted
on in a different location. Copy it and handle as we normally would,
restoring the saved PC before returning.
The FPE should probably be reworked to take advantage of the 68LC040's
precalculated effective address, at some point.
to signal that the build is happening on a machine with an ELF
toolchain. This is temporary, until a better toolchain-recognition
scheme is worked out.
- Only pass user trace traps and breakpoints on to trap().
Gets rid of some hair in the trace/breakpoint trap cases.
- Before entering the debugger, switch to a temporary
stack so that the debugger can alter the stack pointer.
- Add glue for KGDB (still not complete).
Some other minor cleanup:
- Protect against some bad pointer derefs.
- Be more a little more verbose when a fatal trap
occurs to aid debugging.
- Only pass user trace traps and breakpoints on to trap().
- Before entering the debugger, switch to a temporary
stack so that the debugger can alter the stack pointer.
- Add glue for KGDB (still not complete).
Clearly mark the MMU enable trampoline code.
the keyboard to work. Fixes a bug where booting with `-d' worked
only on systems using a serial console.
While I'm here, eliminate some redundancy in the ite console intialization
code.
This fixes a critical bug where a clock interrupt would happen sometime
between the call to hp300_calibrate_delay() and when proc0 is initialized.
This ends up dereferencing a bad pointer in itimerdecr(), which scribbles
over the first page of kernel text, specifically vectors 46 and 47 (decimal).
To complicate matters, the way the bug manifested itself was different
depending on whether or not DDB was configured into the kernel. When
DDB is in the kernel, kernel text is mapped read/write. When DDB is not
in the kernel, kernel text is mapped read-only. Note that the kernel
scribble happens early, typically before the console is initialized.
In the non-DDB case, the kernel will hang as soon as it's loaded because
the access causes a fault (before the console is initialized, so you
don't see the trap).
In the DDB case, the access does _not_ cause a fault. However, the
mechanism used to enter the kernel debugger is to issue a "trap #15".
Conveniently, this is one of the corrupted vectors (47), thus rendering
DDB useless (it actually caused a recursive panic/trap loop).
This _WILL_ be in the first 1.2 official patch.
include files containing model-specific I/O device configuration.
Add more options and devices (ccd, LKM, etc), as appropriate for
documentation and as examples in a "template" GENERIC config file,
even though not all of these work completely yet.
- This driver supports the on-board mbus-based cgfourteen (sometimes referred
to as "SX") video hardware present on SS20-class machines.
- It does *not* support any of the SX acceleration features.
- It does support the 8-bit mode of the hardware, and looks to X like
a cgthree.
- It does support the cg6-style hardware cursor, even when running X in
cgthree emulation.
- It does support DPMS power-down of compatible displays on later-revision
cg14's.
- There is code to support the true color (32-bit) mode of the cg14 as
cg8 emulation, but it is disabled by default because it is most likely
broken. #define CG14_CG8 to turn it on.
The driver is not yet installed in the conf files, but I will do so
shortly...
Check only the IR bit of the CIAA Interrupt Control Register when testing
for a level 6 interrupt. An interrupt only occurs if IR is set, and IR is
only set if the individual mask bits are set. The individual interrupt
status bits can be set without causing an interrupt if the corresponding
enable bits are not set.
from arch/mips/mips/locore.S to arch/pmax/pmax/locore_machdep.S.
* Move ARC-specific locore code (vmstat -i counters) to
arch/pica/pica/locore_machdep.S.
* When the mips3 locore support is known to work, both ports can now use
arch/mips/mips/locore.S.
wrappers for:
gets.c getenv.c strcat.c strcpy.c
so they compile again (if _KERNEL is defined).
For bootblock space reasons it would be prereable to call the PROM entrypoints
directly, via the macro wappers in de_prom.h, rather than C function wrappers.
* Create arch/mips/Makefile.inc with source list of generic MIPS-cpu
files for tags
* Use mips/Makefile.inc and updated tag list in pmax/Makefile
* Try building bootblocks in arch/pmax/stand.
clock_attach() time (for now).
This removes our dependance on the DraCo ROM access timing and frees
the second CIA on Amigas.
b) support for DraCo rev. >= 4 native timer chips.
for a level 6 interrupt. An interrupt only occurs if IR is set, and IR is
only set if the individual mask bits are set. The individual interrupt
status bits can be set without causing an interrupt if the corresponding
enable bits are not set.
NOTE: THESE FILES ARE NOW IDENTICAL TO THEIR ALPHA COUNTERPARTS.
The C preprocessor does the Right Thing when these files are built
on a SPARC. This makes it significantly easier to diff the two
versions (until a real MI 53c9x driver is done, hint hint).
* Handle message retransmissions and partially sent messages correctly.
* Make sure we clear ATN after the last message is sent.
* Do the right thing if the target initiates negotiation for async mode
after having negotiated sync mode.
* Fix some cases where we set ATN with no message queued, or schedule a
message without setting ATN.
* Issue a REQUEST SENSE after an unexpected disconnect, per SCSI spec.
* Fix abort handling in a number of cases.
* Recognize selection timeouts better (to speed up probing).
ELF-outputting version of the assembler. (It was dying when it saw
some CPP line number markers.) This is temporary. (Workaround suggested
by Matt Thomas.)
would generate two interrupts, one real and one spurious. The solution
is to force a drain of the SBus->MBus write buffers after writing to the
lance to clear the interrupt. Thanks to Chris Torek for pointing out a much
easier way to do this than I had planned...
consistency with the way machdep headers for other things are done.
(the creation of the ecoff_machdep.h files was done on the CVS server, to
keep the RCS logs intact.)
macros to use to remove #ifdefs from the machine ID case check.
Eventually, these headers will contain other information, e.g.
machine-dependent relocation information, etc.
use the pre-autoconfig cold serial-console inititialization entry
points from the bus-specific cfattach front-end code.
* Delete post-autoconfig code to switch from PROM output to kernel
driver for machines with dc serial chips.
cfattach front-end code:
dc_ds for the decstation 2100( pmin), 3100 (pmax), and 5100.
dc_ioasic for the decstation 5000/200 (3max) which does not have a
DEC TC-style IOCTL asic, but is configured as if it did.
* Add pre-autoconfig code initialization of kerenl dc driver console I/O
for remote serial consoles. The hack to use PROM serial I/O until the
dc device is autoconfigured is no longer necessary.
* Add MIPS make variable pointing at $S/arch/mips
* Build locore from $MIPS/mips locore source
* Build locore.o and fp.o (fp emulation) from arch/mips locore source
* Add target and rules to build pmax-specific locore code locore_machdep.o
from $PMAX/pmax/lcore_machdep.S
>* Use `-S' rather than `-x' to remove debugging symbols.
because the pmax toolchain and gcc disagree about what is a "local"
symbol, and ld requires a "-x" to let elf2aout build bootable a.out kernels.
to call mcount(). This is needed because the ``link a6,#0'' insn used
trips up gcc's ANSI preprocessor (A # in a function-type macro must be
followed by a macro argument). _PROF_PROLOG is also used in the i386
asm.h.
Solaris' asm_linkage.h has a MCOUNT macro similar to _PROF_PROLOG
except it expands to different code sequences based on whether a
function is being compiled with "prof" or "gprof" instrumentation.
I also discovered that the m68k ALTENTRY is very different than the
implementation used by other NetBSD ports. Usually ALTENTRY simply
provides an alternate function entry point. The m68k version takes a
second argument and jumps inside the second function when profiling is
enabled. The m68k behavior is similar to the ENTRY2 macro found in
solaris.
Providing ENTRY2 and changing all the code that uses ALTENTRY to use
it would be a desirable change.
(1) the if_prom code needs to be cleaned up quite a bit
(right now it hard-codes client's ethernet address), and
(2) much of this code (esp: getsecs.c, netboot.c, newvers.sh,
rpcc.S) should be shared with other Alpha boot blocks,
and dev_net.[ch] should maybe go in libsa proper.
in the branch-emulation code was uninitialized, due to a misplaced #endif.
Remove the relevant #ifdef (macro version of GetBranchDest), and move the
XXX note about r4000 branch targets to the function definition.
boot block, since it will be shared with the network boot block.
(2) Kill a.out support, since it never worked was never used, and will
never be.
(3) Add support for booting of ELF kernels, from Matt Thomas. (Currently
untested, but it compiles.)
serial consoles to the 1.2 branch. Includes:
* dynamically allocated new-config softc
* remove dependencies on Decstation CPU type, use flags in softc instead.
* pass in values for softc flags (q.v.) from parent-specific attach code
* #ifdef out rts/cts flow control support until it's known to work on
200s.
* redo initialization of serial consoles (needs more work).
force a drop to the system debugger. WARNING: this used to be the
default behavior! Modify custom kernel configs accordingly.
- Check for ZS_HWFLAG_CONABRT in zs_abort(), and don't abort if it's
not set.
matthias