2c8717021d
bzero->memset, bcopy->memcpy, bcmp->memcmp
1998-08-09 22:36:37 +00:00
878203d616
Cosmetics: it's a "HyperCom 3Z" on a ZBUS, no "HyperCom 3".
1998-08-09 22:25:18 +00:00
cf7abcbe64
Minor cleanup to debugging cruft.
1998-08-09 22:11:48 +00:00
98f1a01dec
Actually probe the hardware.
...
This is for HyperCom 3i slaveboards (to be done soon) that might or might not
sit on top of a HyperCom 3Z or HyperCom 4 or ISDN Blaster.
1998-08-09 22:08:40 +00:00
e6886047c9
bzero->memset, bcopy->memcpy, bcmp->memcmp
1998-08-09 21:58:52 +00:00
592b1dd587
But seriously...
1998-08-09 21:41:45 +00:00
a85ed63924
Oops; the previous was wrong on little-endian machines.
1998-08-09 21:35:03 +00:00
4522c799a1
bzero->memset, bcopy->memcpy, bcmp->memcmp
1998-08-09 20:51:08 +00:00
e1601dc2ca
bzero->memset, bcopy->memcpy, bcmp->memcmp
1998-08-09 20:36:58 +00:00
4ffebebb25
Several things:
...
* Use the new trigger_{in,out}put interface.
* Allow the play and record channels to have different encodings (but the
same sample rate).
* Play u-law and a-law as 16-bit data. (This may not work yet...)
1998-08-09 20:32:34 +00:00
17431823fb
Add trigger_output and trigger_input entry points, which replace
...
init_{in,out}put and start_{in,out}put, and are only called once.
1998-08-09 20:28:07 +00:00
27ca6798df
bzero->memset, bcopy->memcpy, bcmp->memcmp
1998-08-09 20:15:38 +00:00
8cbcfa0df2
Add mulaw_to_slinear16 and alaw_to_slinear16.
1998-08-09 19:22:15 +00:00
b1bb9aa490
Oops. We do still need to set t_dev in the first open part of zsopen,
...
so we get ttyXX vs cuaXX right. Leave the initialization in attach.
1998-08-09 18:36:45 +00:00
64e4a1fa7d
Support video interrupt for GrandVimage 17iL video card.
1998-08-09 18:19:09 +00:00
e9ef31ed72
msdosfs -> adosfs
1998-08-09 17:54:50 +00:00
b872f9b8e7
avoid lint error.
1998-08-09 12:47:27 +00:00
4a75265273
defopt PFIL_HOOKS.
1998-08-09 08:58:18 +00:00
a2fc689833
Make sure output is thoroughly halted on close, and remember that we stopped
...
it.
1998-08-09 07:25:58 +00:00
b4e0bf5dfb
Use 4- and 8-byte DMA transfers.
1998-08-09 06:52:57 +00:00
0611fc34f8
Don't actually touch the hardware in set_params; defer that until we actually
...
start a transfer. Instead, just check that the parameters are valid.
Also, use 16-bit output for u-law and a-law.
1998-08-09 06:38:30 +00:00
26e55969e4
Initialize the struct tty's t_dev field at attach rather than first open.
...
The attach routine calls zsparam if we're setting up the console, and
zsparam needs this field to tell which zstty to set up. Otherwise, we
set up zstty0 even if it's not the console!
1998-08-09 06:17:07 +00:00
9bedf069cd
Mask off extra usemode bits.
1998-08-09 05:44:51 +00:00
5eba82397c
Oops; fix typo.
1998-08-09 04:59:55 +00:00
017b9af5fe
Clarify with a specific reference to the manual page in question.
1998-08-09 04:58:08 +00:00
b3853549b3
Always copy back both the record and play parameters, in case the driver had
...
to change one behind our back.
1998-08-09 04:54:44 +00:00
12f5a41e1f
Make the previous slightly more robust, and set AUDIO_PROP_INDEPENDENT.
1998-08-09 04:40:55 +00:00
c8532af3b2
Make sure the sample rate is the same on both channels, tracking the change
...
from one channel to the other if only one is active.
1998-08-09 04:14:47 +00:00
759ca5ee0c
The manual says to use the other crystal for 22050Hz.
1998-08-09 03:48:42 +00:00
5d236ade07
minr KNF nit ..
1998-08-09 03:16:23 +00:00
fe3c14b64d
use __sparc__ not sparc
1998-08-09 03:12:39 +00:00
565adbaffb
Set the FIFO control bits correctly so that stereo recording works.
1998-08-09 02:54:50 +00:00
80457a2c65
Use auto-initialize DMA for recording.
1998-08-09 02:05:52 +00:00
093a8daf6b
Go to splhigh in the debugger.
1998-08-09 00:00:57 +00:00
e2686d0a1b
Use splnet, not splimp.
1998-08-08 23:51:39 +00:00
c49235f44c
Use splnet(), not splimp().
1998-08-08 23:44:12 +00:00
7795559d04
Use splaudio on the arm32 port.
1998-08-08 23:40:03 +00:00
d5eb56b2c2
Move splclock and splaudio outside splimp.
1998-08-08 23:39:38 +00:00
f996a2e194
Define IFM_INST_MAX, the largest possible "instance" value.
1998-08-08 22:12:30 +00:00
254afcaecb
Sleeping forever kinda sucks.
1998-08-08 21:37:00 +00:00
09502c9fb2
Fix -Werror compilation failure due to lack of a couple of 'const's.
1998-08-08 20:57:55 +00:00
17932f0575
Set the correct modes for the record channel.
1998-08-08 20:55:36 +00:00
e9534620b0
Netboot support for KA46 (VS4000/60).
1998-08-08 16:10:41 +00:00
88191aeeee
Reduce this file as done in the Alpha RAMDISK configuration, which makes
...
keeping it in sync less prone to errors.
1998-08-08 12:59:43 +00:00
4d9c340f85
Pathconf: for V2 mounts, revert back to failing with EINVAL if an RPC would
...
be necessary to obtain the information, as this fits the pathconf semantics
of `no association supported' better than `no limit available.'
1998-08-08 11:39:20 +00:00
8fdb1c8ebe
Lots of kernlib functions rewritten as inline macros.
1998-08-08 11:18:32 +00:00
94e9a8651a
Forgotten to commit this in last change.
1998-08-08 11:00:33 +00:00
815f9f2445
1. Untangle preprocessor conditionals for sanity and {} balance
...
2. Fix a race between the first callout and the first non-polled ncr_start()
1998-08-08 00:14:08 +00:00
86233eeede
Regen again, to indicate which master revision these were generated from.
1998-08-07 17:21:35 +00:00
a6b5ab0c92
Moved parioctl.h to the system header directory.
1998-08-07 16:16:36 +00:00
4c4cdda003
Switched to MI zs driver.
1998-08-07 11:19:13 +00:00
e081a838b5
Add client pathconf support.
1998-08-07 11:02:39 +00:00
dabc8eb436
Implement the 'i' flag which makes the bootloader ask for the file to
...
load (as in OSF/1).
Useful for netboot where "-file" doesn't work as needed.
1998-08-07 10:38:37 +00:00
49637cda8d
use an md keyboard beep replacement function on alpha too
1998-08-07 10:28:36 +00:00
e8564df3b9
implemt a simple "beep" device to access the ISA speaker
1998-08-07 10:26:38 +00:00
026fbbe2db
Match PCI-ISA bridges on class/subclass instead of vendor/device.
...
2 reasons:
-no need to keep a list of all known parts
-there is at least 1 bridge (ACC micro 2051) which reports the same
device ID for its various subfunctions; this would require an additional
check in the match function
(keep the old list inside #if 0 in case one of the historical bridges
doesn't report the right class/subclass - I can't check them all)
1998-08-07 10:15:32 +00:00
9bb616c621
Regen.
1998-08-07 06:59:31 +00:00
88c6239026
Add product IDs for the 3Com Cyclone-based PCI Ethernet devices,
...
the 3c90xB DMA-only cards.
1998-08-07 06:58:57 +00:00
558733ffc6
Track our carrier status and report it in the media status callback.
1998-08-07 05:55:14 +00:00
202c97c54d
Add an isapnp frontend for the ess driver. It somewhat works
...
(sounds is made but one buffer is played continuously).
1998-08-07 00:53:23 +00:00
7b044dea51
Make the irq checking logic somewhat less bogus.
1998-08-07 00:51:06 +00:00
51bb504a6e
Report a sensible MIDI device name.
1998-08-07 00:28:20 +00:00
48bae9ee88
Add MIDI support. The MIDI devices can be accessed as ``raw'' through
...
the /dev/rmidiN devices, or with a sequencer interface via /dev/music.
So far the only supported MIDI device is the MPU401 port on SoundBlaster
(and only on SB on isapnp, since we do not have locators with multiple
values yet).
1998-08-07 00:00:55 +00:00
741d372539
Like for NFSv2, add a pointer to the NFSv3 RFC, too.
1998-08-06 19:44:28 +00:00
ddb9746a51
Define the minimum and maximum "network type" values. These values are
...
incremented by the minimum to interate through them.
1998-08-06 19:16:37 +00:00
d082dd3db4
Moved grfioctl.h and iteioctl.h to the public include directory.
1998-08-06 14:08:53 +00:00
02c9ad1755
And fix pastos.
1998-08-06 12:26:51 +00:00
a79bb0d7ae
Fix tyop.
1998-08-06 12:23:39 +00:00
546365a27e
_POSIX_SOURCE -> _POSIX_C_SOURCE
1998-08-06 11:25:04 +00:00
709dda58f8
_POSIX_SOURCE -> _POSIX_C_SOURCE, and add missing protection bits.
1998-08-06 11:22:57 +00:00
e2a2525203
fix incorrect length of LOCATE CDB (reported in PR kern/5306 by
...
Dave Huang <khym@bga.com>)
1998-08-06 10:20:38 +00:00
62cff0207c
comment out the prototypes for bcopy, ovbcopy, bzero, and bcmp.
...
uncomment macros transforming into memcpy, memmove, memset and memcmp.
the prototypes should be deleted from the file some time soon.
1998-08-06 04:50:14 +00:00
b84f472652
Sigh. "consts in prototypes can be quite a drag..."
...
fix last two fixes one more time, this time dealing with ugly
prototype issues, including the fact that the bcopy returns nothing,
but memcpy returns a void *. Never mind that we don't use it...
1998-08-06 04:37:57 +00:00
9f63941cfa
Fix botched prototype decl in last fix.
1998-08-06 04:25:55 +00:00
df410f33db
Convert bcopy,bzero to memcpy,memset
...
This was semi-nontrivial, since a function pointer to bcopy gets used
in this file.
Note #1 : The catchpacket routine, which takes a function pointer to
bpf_mcpy or memcpy, should probably be converted to take a
flag that just says which is used, so memcpy can be inlined.
Note #2 : The code is heavily #ifdef'ed to run on older operating
systems. We probably want to clean that cruft out, unless
someone is planning a new release of the code at LBL (doubtful.)
1998-08-06 04:24:25 +00:00
7ba85a8779
if syscall_debug & compat_sunos, include sunos_syscalls.c
1998-08-06 02:58:44 +00:00
dd588c0660
Add a macro to create a media word from type, subtype, options, and instance.
1998-08-06 02:38:19 +00:00
b04ded7264
Completely rewrite the way media descriptions are represented. The same
...
data structure is used, but a much saner matching mechanism is used, one
which allows greater ease in adding new types.
1998-08-06 02:19:34 +00:00
e2a897639d
KNF (only include one of <sys/{param,types}.h>).
1998-08-05 16:50:39 +00:00
0c6791d804
Add macro to test iobase validity.
1998-08-05 16:40:22 +00:00
28e2d6024a
Clarify a comment.
1998-08-05 16:38:09 +00:00
d8582601c5
Make panic message a little more explicit.
1998-08-05 16:34:36 +00:00
32fce55082
Improve generation of default disklabels:
...
-store printable product ID in cd's and sd's softc, use it as "typename"
-for this, add a "destination buffer length" argument to scsipi_strvis()
-return ATAPI device type for ATAPI devices
1998-08-05 16:29:04 +00:00
4df8f47ebc
Switched to MI zs driver.
1998-08-05 16:08:33 +00:00
e8551dcab3
Fixed stray pointer access reported by Yasufumi Itoh.
1998-08-05 15:57:43 +00:00
89f91f85fa
Fixed typo.
1998-08-05 14:40:20 +00:00
a0aeff98c4
Fix two pastos.
1998-08-05 10:16:25 +00:00
c3579ce3f5
bzero->memset, bcopy->memcpy, bcmp->memcmp
1998-08-05 02:45:08 +00:00
54f97ab9d1
bzero->memset, bcopy->memcpy
1998-08-05 02:28:26 +00:00
584757c02b
bzero->memset
1998-08-05 02:11:00 +00:00
bf0943278c
Fix a problem first noticed by a user with a screwed up real time
...
clock past the End of Time.
If time_t is 32 bits, then the "End of Time" is Jan 18/19 2038
(depending on time zone).
This code copes with RTC's past the end of time if time_t is an int32
or less. It just forces the time back to 2037. This will let users
with screwed up clocks to at least boot and function long enough to
set their clocks to something sane.
This kludge is conditioned on an
if (sizeof(time_t) <= sizeof(int32_t))
which will automatically optimize the code out once we switch time_t
to a 64 bit quantity, which should happen well before 2037.
Patch based on code from Michael C. Richardson, with help from
Allen Briggs who pointed out a fencepost error.
1998-08-05 01:21:54 +00:00
f15ade7552
enable nanosleep in linux emul, per pr-5906 from Soren S. Jorvang
1998-08-05 00:44:32 +00:00
9186d2da5c
Simple instrumentation of pmap_steal_memory().
1998-08-04 22:40:17 +00:00
71c8693225
Add missing "-a" to mkdep line for pmax locore_machdep.S.
...
From Noriyuki Soda.
1998-08-04 20:17:09 +00:00
25997dd19d
IPL_TTY -> IPL_SERIAL.
1998-08-04 20:09:37 +00:00
7b07ad780a
Per XNS Issue 5, calling recvmsg(2) or sendmsg(2) with an msg.msg_iovlen less
...
than or equal to 0 shall fail with EMSGSIZE; the latter condition was not being
checked for. Also, document the msg.msg_iovlen > {IOV_MAX} case.
1998-08-04 19:48:34 +00:00
b6ffd3a85e
Don't call cpu_tlb_flushID() from the pmap_update macro.
1998-08-04 19:11:29 +00:00
e9545cf241
Fixed memory probe for color turbo machines.
1998-08-04 19:08:23 +00:00
167a777474
Drop in the lastest round of optimisations from Neil Carson.
...
The cache cleaning code in pmap_copy_page() and pmap_zero_page()
has been rewritten and uses a new function pmap_clean_page().
pmap_remove() has been completely rewritten to make it more efficient
when there are only a few pages that actually need to be removed.
1998-08-04 19:02:19 +00:00
b72d8d17f9
__BROKEN_INDIRECT_CONFIG fixes.
1998-08-04 16:51:51 +00:00
ea7f1dbe36
Some files were not deleted with make clean.
...
Keymap files are now installed in /usr/share/keymaps/x68k.
1998-08-04 16:39:55 +00:00
47ac4421e0
In setregs(), only pass the stack value in r12 if COMPAT_1[123] is defined.
1998-08-04 16:25:28 +00:00
4b14908352
Fix the validation of source addresses in db_read_bytes() so that
...
memory ranges mapped with L1 section mappings do not cause aborts
due to lack of L2 page table.
1998-08-04 16:19:54 +00:00
e9c872cd6b
Define a macro L1_MASK to mask out the level 1 pde type bits.
1998-08-04 16:16:22 +00:00
aced90770c
Message fixes.
1998-08-04 16:10:45 +00:00
233cd5d60b
RB_POWERDOWN is now supported.
...
Check if the power switch is open (off) in the shutdown_hook,
and try removing the power in cpu_reboot.
poffd default action is now shutdown -p.
1998-08-04 16:07:53 +00:00
f76fb48283
Use looping DMA for play channel.
...
More cleanup.
1998-08-04 13:14:42 +00:00
c6ef57702d
UIO_MAXIOV -> IOV_MAX
1998-08-04 12:19:15 +00:00
5b057ab09f
Allow option AUDIO_INTR_TIME even if the platform does not support
...
FP in the kernel.
1998-08-04 11:26:14 +00:00
3dc1e8147c
Kill "options FIFO" - they're mandatory now.
1998-08-04 11:19:02 +00:00
242ff31b91
update bzero.c to stub from libc/string
1998-08-04 06:27:08 +00:00
974739923b
replace several special targets with stub .c files, as in libc/string
1998-08-04 05:01:58 +00:00
275d1554aa
Abolition of bcopy, ovbcopy, bcmp, and bzero, phase one.
...
bcopy(x, y, z) -> memcpy(y, x, z)
ovbcopy(x, y, z) -> memmove(y, x, z)
bcmp(x, y, z) -> memcmp(x, y, z)
bzero(x, y) -> memset(x, 0, y)
1998-08-04 04:03:10 +00:00
4d4aa090e9
add memcmp.c
1998-08-04 03:40:43 +00:00
16039920c8
remove memcpy.c -- I forgot this gets built anyway
1998-08-04 03:40:12 +00:00
612c53d05f
add memcmp.c
1998-08-04 03:39:49 +00:00
0b8f8ffda2
remove memmove.c -- I forgot this gets built anyway
1998-08-04 03:38:28 +00:00
58af7a969a
add memcmp.c memcpy.c memmove.c
1998-08-04 03:37:03 +00:00
a611b37e29
add memcmp.S memmove.S
1998-08-04 03:35:59 +00:00
6ee9cbf929
add memcmp.S memmove.S
1998-08-04 03:30:30 +00:00
5ede68eddb
add memcmp.c memmove.S
1998-08-04 03:17:39 +00:00
e0f41ebe62
add memmove.S
1998-08-04 03:16:19 +00:00
d91830b032
Namespace cleanup. Prefix all the JMPBUF* macros with _JB.
1998-08-04 02:01:17 +00:00
542f66b672
add memmove.S
1998-08-04 01:41:26 +00:00
6ea886d397
add memcmp.S
1998-08-04 01:40:57 +00:00
a8627d22ba
Fix formatting, and add memmove.S
1998-08-04 01:14:36 +00:00
534fb67f27
fix silly comment typo
1998-08-03 20:32:48 +00:00
3d9b4a4320
Fix two off-by-one bugs, both present in each recvmsg(2) and sendmsg(2):
...
* the first one would cause an unnecessary malloc() of iovec storage for
a msg_iovlen of UIO_SMALLIOV although the required amount of memory has
been allocated on the stack.
* the second one would cause a recvmsg() or sendmsg() with a msg_iovlen of
UIO_MAXIOV to fail with EMSGSIZE, which is also a violation of XNS5.
1998-08-03 15:15:58 +00:00
c68582d64b
UIO_MAXIOV -> IOV_MAX
1998-08-03 15:01:00 +00:00
5404ba4886
Add support to query the
...
* availability of POSIX Synchronized I/O (kern.synchronized_io),
* maximum number of iovec structures to be used in readv(2) etc. (kern.iov_max)
via sysctl().
1998-08-03 14:38:20 +00:00
93897b8303
Per XSH5, define IOV_MAX which is provided via <limits.h>, and declare
...
UIO_MAXIOV deprecated.
1998-08-03 14:27:50 +00:00
af261318d9
Now that we have it, add a conversion for _PC_SYNC_IO.
1998-08-03 14:23:30 +00:00
12a866151b
Recognize _PC_SYNC_IO.
1998-08-03 14:19:57 +00:00
d2753d235a
Add _POSIX_SYNCHRONIZED_IO, _SC_SYNCHRONIZED_IO, _SC_IOV_MAX and _PC_SYNC_IO.
...
Fix a typo.
1998-08-03 14:16:04 +00:00
5429ccda94
Pass the dma_tag to _bus_dmamap_load_buffer.
1998-08-03 13:09:01 +00:00
1b58f59205
Add IFM_10_FL - 10baseFL (fiber)
1998-08-03 12:42:26 +00:00
ac2b25e392
Improve some error messages.
...
Make some preparations for isochronous transfers.
1998-08-02 22:30:52 +00:00
607075abc6
Use wskbd enable function.
1998-08-02 22:27:01 +00:00
70fe6c76a1
Pass ps_strings in r0 when execing processes.
...
Use macros rather than absolute values in zero_page_read*() functions.
1998-08-02 21:50:31 +00:00
005ae749a7
Oops, make a sentence added in previous commit parseable.
1998-08-02 19:42:35 +00:00
e719e2f606
Bump version to 1.3G:
...
- mbuf interface change from poolification (removal of m_clalloc).
- vnode IO_SYNC/IO_DSYNC interface change.
1998-08-02 19:19:11 +00:00
85b7cfc8c3
Make sure we initialize pr_nidle.
1998-08-02 19:07:47 +00:00
933111f98f
Implement support for IEEE Std 1003.1b-1993 synchronous I/O:
...
* in the read vnode operator, check for IO_SYNC being set in the ioflag and
synchronously update the file's meta-data if appropriate.
* in the write vnode operator, update the appropriate checks for IO_SYNC being
set in the ioflag to reflect that IO_DSYNC is now inclusive-or'ed into
IO_SYNC, and require all IO_SYNC bits to be set for operations defined by
synchronized I/O file integrity completion but not by synchronized I/O data
integrity completion.
1998-08-02 18:57:23 +00:00
b7877d3fc0
Implement support for IEEE Std 1003.1b-1993 syncronous I/O:
...
* if synchronized I/O file integrity completion of read operations was
requested, set IO_SYNC in the ioflag passed to the read vnode operator.
* if synchronized I/O data integrity completion of write operations was
requested, set IO_DSYNC in the ioflag passed to the write vnode operator.
1998-08-02 18:39:14 +00:00
d8b09acbf7
Per IEEE Std 1003.1b-1993, Synchronous I/O Option, add O_DSYNC (synchronized
...
I/O data integrity completion) and O_RSYNC (complete read operations at the
same level of integrity requested for write operations).
1998-08-02 18:31:09 +00:00
5e466df173
Add a new I/O flag, IO_DSYNC, which requests the operation do to synchronized
...
I/O data integrity completion and change IO_SYNC (synchronized I/O file
integrity completion) do inclusive-or it, since it's a superset of the former.
1998-08-02 18:26:30 +00:00
6ee9772e54
Fix PR5898: ppp delays last packet.
1998-08-02 15:09:50 +00:00
0dc548ce7d
Adapt to wskbd interface changes; add dummy enable/disable function.
1998-08-02 14:22:25 +00:00
86b0985e69
Adapt to wskbd interface changes; implement enable/disable function.
...
Disable the keyboard on attach if not console.
1998-08-02 14:21:02 +00:00
4ee71fe4f4
Split the wskbd_attach arguments into console and autoconfiguration parts
...
(again); put some constant data into shared structures. This makes it
more look like the mouse part, and it helps USB integration.
Implement wskbd_enable() to enable/disable the keyboard.
1998-08-02 14:18:07 +00:00
a4c7bab10e
Use the pool allocator for sockets.
1998-08-02 04:53:11 +00:00
0e28b643e9
Use a pool for proc structures.
1998-08-02 04:41:32 +00:00
6f739e1a66
Fix a braino in the idle page instrumentation.
1998-08-02 04:34:46 +00:00
833061914a
Use the pool allocator for tcpcbs.
1998-08-02 00:36:19 +00:00
d319e4b419
Use the pool allocator for syn_cache entries.
1998-08-02 00:35:51 +00:00
47e9dcf841
Use the pool allocator for inpcbs.
1998-08-02 00:35:31 +00:00
7c61b8cdd8
Instrument "idle pages" (i.e. pages which have no items allocated from
...
them, and could thus be freed back to the system).
1998-08-01 23:44:20 +00:00
bf8f319d0e
Remove some lint.
1998-08-01 21:12:32 +00:00
eba74b9369
Abort interrupt pipe on disconnect.
1998-08-01 20:52:45 +00:00
8eeb95fce4
Implement pci_intr_disestablish().
1998-08-01 20:25:12 +00:00
6aff95b06c
Make sure to abort the interrupt pipe on disconnect of a mouse or keyboard.
...
Improve some error messages.
1998-08-01 20:11:38 +00:00
92fa3a68ad
In sio_intr_disestablish, also make sure that IRQs 0, 1, 8, and 13
...
default to edge-triggered, just like in the setup.
1998-08-01 19:38:29 +00:00
0b60fda7c8
Implement sio_intr_disestablish(), and ensure that an initially-enabled
...
interrupt is never disabled and an initially-level-triggered interrupt
never becomes untyped.
1998-08-01 18:54:21 +00:00
528dab6808
Implement alpha_shared_intr_disestablish(). Simply removes the handler
...
fromthe list, allowing the caller to manipulate the sharing type,
if appropriate.
1998-08-01 18:52:36 +00:00
f654e0188e
Switch from a global flag to tell if the host controller should use
...
polling to a local one for each controller.
1998-08-01 18:16:19 +00:00
5a1f4dd6bc
Complete the scancode conversion table.
...
Tell the keyboard not to send idle reports.
1998-08-01 17:46:22 +00:00
aec399e36f
Changes to keep lint happy.
...
In particular, fix some Makefiles so the include
paths are passed to lint.
1998-08-01 11:22:51 +00:00
3c658f1f41
Don't call the protocol drain routines if how == M_NOWAIT, which typically
...
means we're in interrupt context. Since we can be called from a network
hardware interrupt, we could corrupt the protocol queues we try to drain
them at that time.
1998-08-01 01:47:24 +00:00
45d17e02f7
We need to be able to specify a uvm_object to the pool page allocator, too.
1998-08-01 01:39:03 +00:00
c56c24f4fd
Initialize the mbuf allocator _before_ autoconfiguration; it might be
...
called when devices attach, take two.
Note that it is necessary that mbinit() NOT allocate memory, since it
is called before mb_map is created. This is not a problem with the
pool allocator that is now used for mbufs and mbuf clusters.
1998-08-01 01:36:35 +00:00
e7521693c1
Use the pool allocator for mbufs and mbufs clusters (two pools, one for
...
each). Partially from pk@netbsd.org .
1998-08-01 01:35:20 +00:00
e8b92fa131
Oops, back out previous. I need to attack that problem differently.
1998-08-01 01:20:43 +00:00
ce69d417a2
Make it compile without DIAGNOSTIC
1998-07-31 23:54:09 +00:00
2b8a659f68
make libkern build memmove() properly
1998-07-31 23:44:41 +00:00
730baa7431
fix sizeofs so they comply with the KNF style guide. yes, it is pedantic.
1998-07-31 22:50:48 +00:00
6c727e1651
dvma_malloc(), dvma_mapin() and dvma_mapout() are gone; all drivers
...
the use bus_dma(9) interface now.
1998-07-31 22:35:07 +00:00
359cf8c23d
Move `dvma_cachealign' here from vm_machdep.c
1998-07-31 22:23:30 +00:00
a0818b4b8b
Use bus_dmamem_alloc/bus_dmamem_map.
1998-07-31 22:21:35 +00:00
17e88cf50e
Initialize the mbuf allocator _before_ autoconfiguration; it might be
...
called when devices attach.
1998-07-31 21:59:55 +00:00
fe7696eacb
Un-static pool_head; vmstat wants to find it.
1998-07-31 21:55:09 +00:00
55bf1fd9ad
Allow an alternate splimp-protected map to be specified in the pool page
...
allocator routines.
1998-07-31 20:46:36 +00:00
6e34b79e01
Suggestion from Matthias Drochner: If at close you decide to write
...
filemark 'coz you opened write only and didn't do anything else,
call st_check_eod to possibly write TWO furshlugginer filemarks.
Also- return any errors from writing filemarks out of stclose.
1998-07-31 17:25:55 +00:00
0869d8f714
Blargh, deal with some fallout from the ISA PnP goo, this will go away once
...
we can pull in files.isa properly.
1998-07-31 16:42:01 +00:00
519f1f7f0e
Convert to bus dma.
1998-07-31 15:53:11 +00:00
17de9df6c1
Reject an iovcnt argument of 0 to readv(), writev(), preadv() and pwritev()
...
as invalid. This has been stated by the respective manual pages at least
since Net/2, and is the behaviour specified by XSH5.
1998-07-31 15:38:58 +00:00
22554e01a9
Following discussions with eeh and mrg, change most of these types so
...
that they should make an ILP32 setup with an ILP32 compiler and an LP64
setup if run through an LP64 compiler. None of the data sizes actually
change right now, and any type errors that show up would have to be fixed
eventually anyway.
1998-07-31 15:30:40 +00:00
6b407a79c6
Major cleanup of the ESS driver. It now sorta works. More to come.
1998-07-31 15:17:17 +00:00
a24dbc8065
(Always) (practice) (safe) (macro expansion).
1998-07-31 15:07:41 +00:00
c206cad36e
Convert to bus_dma.
1998-07-31 12:45:48 +00:00
53878c1925
Change one word to be consistent w/ a previous message.
1998-07-31 05:37:02 +00:00
99d64ae1ca
Oops, unused variable.
1998-07-31 05:29:48 +00:00
4ea9132164
Rearrange isapnp_callback() slightly.
1998-07-31 05:28:24 +00:00
c489673819
Ensure we're probed only once per ISA bus.
1998-07-31 05:26:15 +00:00
06761b1ed4
Merge in a register definition mentioned only in passing in one place in
...
the Zilog docs.
1998-07-31 05:08:38 +00:00
6ec566abd2
Add BeBox support.
1998-07-31 04:56:55 +00:00
46c7e2fa53
ISA PnP goo.
1998-07-31 04:55:30 +00:00
2e33e4c2fa
First-cut support for ISA PnP for NetBSD/bebox.
1998-07-31 04:54:38 +00:00
c46ad7a0cc
Add NetBSD/arm32 support.
1998-07-31 04:50:54 +00:00
29ad6dac50
ISA PnP goo.
1998-07-31 04:50:01 +00:00
6f3b1afe37
First-cut ISA PnP support for NetBSD/arm32.
1998-07-31 04:48:42 +00:00
171cebde9c
Actually add support for the Atari.
1998-07-31 04:45:01 +00:00
92d42c0871
Add a comment about why we can (and must) use bus_space_{,un}map() directly
...
in this file.
1998-07-31 04:44:10 +00:00
75db93cec2
Pull in files.isapnp here; the two busses are linked together quite closely
...
(more than we'd like maybe, but don't we wish ISA didn't suck...)
1998-07-31 04:40:39 +00:00
a138b68143
Don't include files.isapnp here.
1998-07-31 04:39:23 +00:00
9589268364
Add unused zskbd and zsms entries, and ISA PnP entry.
1998-07-31 04:38:51 +00:00
e2ce6c8a28
Machine-dependent ISA PnP goo for NetBSD/alpha.
1998-07-31 04:38:04 +00:00
f948e430bb
Provide a hook for bypassing space accounting, needed to support ISA PnP
...
for now.
1998-07-31 04:37:02 +00:00
54de49fcb9
Add support for NetBSD/alpha.
1998-07-31 04:35:22 +00:00
f40a42d5c4
Use config_defer() to scan for ISA PnP cards.
1998-07-31 04:00:35 +00:00
b90b2a3798
Several more changes. First of all, move CTRL_MODE to have I/O behaviour
...
like a no-rewind device. Secondly figure out whether the initial TUR
for a CTRL_MODE open resulted in a tape being actually found (if so,
then do a mount session).
Move the 'sun compatibility' behaviour into stdone && stclose- don't
mark a tape as having been written in stopenm, fer gosh sakes.
1998-07-31 04:00:22 +00:00
03ffe0a516
Use the pool allocator for scsipi_xfer structures.
1998-07-31 03:00:51 +00:00
310dc86986
Add PR_NOWAIT (0) for symmetry.
1998-07-31 02:53:34 +00:00
6056af462f
Use the pool allocator for vndxfer and vndbuf structures.
1998-07-31 02:24:26 +00:00
dcfe0e1506
Back out part of previous; it is perfectly reasonable, and desirable, to
...
print out debugging info ifdef DEBUG.
1998-07-31 02:14:40 +00:00
ecf815f930
Back out previous; it is perfectly reasonable, and desirable, to print out
...
debugging info ifdef DEBUG.
1998-07-31 02:10:12 +00:00
bec14b0ce3
Part A (Cosmetic nonsense):
...
>We're not Linux. If we still want driver version strings to be displayed
>at boot, then I suppose DEBUG is a reasonable compromise.
Makes the whole concept useless. This is for default printouts. If you
can build a debug kernel, you know what version you have. This was under
the concept of 'RAS' so that hapless users could tell you microversion
things. But I guess this isn't the right way according to our local
Jesuits. Oh, well. I'll think up something different and hopefully
less objectionable. And yes, NetBSD isn't linux. The developers seem
to be equally bad tempered, but linux is more successful.
Part B:
Field interrupts in OS layer so that (in this OS) bus_dmamap_sync(POSTREAD)
can (formally) ensure that the result queue is stable wrt to buffering
and that for sending a command a bus_dmamap_sync(PREWRITE) is done to
ensure that the device gets a good view of what the mailbox contents
should be.
1998-07-31 02:08:16 +00:00
36f9ab27ce
>We're not Linux. If we still want driver version strings to be displayed
...
>at boot, then I suppose DEBUG is a reasonable compromise.
Makes the whole concept useless. This is for default printouts. If you
can build a debug kernel, you know what version you have. This was under
the concept of 'RAS' so that hapless users could tell you microversion
things. But I guess this isn't the right way according to our local
Jesuits. Oh, well. I'll think up something different and hopefully
less objectionable. And yes, NetBSD isn't linux. The developers seem
to be equally bad tempered, but linux is more successful.
1998-07-31 01:56:49 +00:00
4356136193
Use the pool allocator for component buffer headers.
1998-07-31 01:23:56 +00:00
11c3d96b49
Flush spurious #endif after ADDMULTI
1998-07-31 01:10:13 +00:00
3cd681ef27
Typo.
1998-07-31 00:42:31 +00:00
34529b444b
From cd.c: call disk_unbusy() if we are unable to enqueue our command.
1998-07-30 23:57:07 +00:00
6026f141fd
Enable bus_dmamem_alloc/bus_dmamem_map
1998-07-30 22:44:51 +00:00
af89712b25
Use bus_dma_*() instead of dvma_mapin/dvma_mapout.
1998-07-30 22:42:04 +00:00
32a5557426
Adapt to changes in the base bus_dma* functions.
1998-07-30 22:29:34 +00:00
8a39d7a7fb
The IOMMU now has its own dma bus tag and associated functions.
...
machdep.c retains the `mainbus' (i.e. sun4/sun4c) bus_dma* versions for now.
Create a DVMA map specifically for 24-bit devices (le,ie), which has a
more room than previous DVMA map which should be reserved for sun4 VME.
1998-07-30 22:28:44 +00:00
862c0bafcc
Define a BUS_DMA flag for devices that have a 24-bit address space.
...
Update _bus_dma* prototypes.
1998-07-30 22:20:31 +00:00
bf52ef5697
Squash unused variable.
1998-07-30 22:17:34 +00:00
7b68dfc9c7
Fixup include paths.
1998-07-30 21:58:48 +00:00
d85ed3d973
Put the SoundBlaster stuff back for files.ofisa (Until we can just
...
properly include files.isa).
1998-07-30 21:51:00 +00:00
ae2fb64e3a
Document supported boards near the top of the driver source code.
1998-07-30 21:28:15 +00:00
4f8d24662e
Uncomment the SoundBlaster ofisa attachment; the Shark isn't the only
...
potenial user of ofisa (e.g. my FirePower). An ofisa attachment for the
SoundBlaster is prefectly legitimate.
1998-07-30 21:25:05 +00:00
0bd4f9291c
Use the correct "compatible" strings (ESS, not generic SB!), and correct
...
some comments about what we expect as far as interrupt and dma properties.
1998-07-30 21:22:59 +00:00
16ad73c288
Add the Simple Technology Communicator 28.8.
1998-07-30 20:47:11 +00:00
b25d4941cd
Regen.
1998-07-30 20:45:35 +00:00
965404c104
Add Simple Technology vendor ID, and Simple Technology Communcator 28.8
...
product ID.
1998-07-30 20:44:25 +00:00
741c837f77
Get to DMA map functions through parent tag, instead of calling some base
...
functions directly.
1998-07-30 18:54:06 +00:00
b7a585b61d
Use the previously committed pnp hook.
1998-07-30 18:03:34 +00:00
c1303944f7
Add a hook that resets the bios configuration from the pnp devices
...
thus making them invisible to isa probes [from OpenBSD]
1998-07-30 18:02:50 +00:00
dd49f248a4
Protect against multiple inclusions.
1998-07-30 18:01:44 +00:00
8bd9c69e11
Multicast support.
1998-07-30 16:40:19 +00:00
c0ca4781ed
ESS attachments for ofisa.
1998-07-30 14:15:59 +00:00
cdeb158d5f
A first stab at making the SHARK sound work. It doesn't really work
...
yet, but it probes and makes a noise when used. Stay tuned!
1998-07-30 14:11:42 +00:00
7712d62ed7
allow ${SIZE} to be set from the environment, also allow using genassym.sh (both for cross compiling).
1998-07-30 13:34:09 +00:00
3a8b550914
Make this a bit more complete. (Triggered by Julian Coleman ;-)
1998-07-30 12:02:41 +00:00
326ffe6cd3
regen
1998-07-30 09:47:49 +00:00
085f3ce0cc
add entry for Boca 56k (from Fujie Zhang <fzhang@NMSU.Edu>)
...
update comment for OPL3-SA2 / OPL3-SA3 (same PnP ID)
1998-07-30 09:45:16 +00:00
e404c0efec
Some minor comment tweaking.
...
Also- to be fair and on review, kern/391 isn't really addressed by
the previous commits. In reviewing, I'm embarassed to find that this
talks about reading at EOT. I'm actually going to claim that this
is 'not a bug' or 'fixed already' in that at the end of media (at the
edge of recorded media), you may continuously open the tape (should
you choose to) issue a read, and zero bytes will transfer- this is a
sufficient EOF indicator.
1998-07-30 04:11:43 +00:00
c45a129a99
Clarify and name some of the 'open' modes. Clarify a few comments. Remove
...
a now unused variable. Also, remove the restriction against at density
code being greater than the max SCSI 2 density code: 0x80..0xff are the
Vendor Unique codes and most certainly should be allowed. The check for
invalid values should be less than 0 or greater than 255.
Oh- yeah, the previous commit addressed kern/391.
1998-07-30 03:17:22 +00:00
7692effeed
Make some changes wrt EOM behaviour. Distinguish EIO_PENDING from
...
EOM_PENDING. Set up a persistent EARLYWARNING behaviour flag. If
set, EOM behaviour forces a 'short read' to signal logical (as
opposed to physical) end of media. The user application may, of
course, do with this information what it will.
The EARLYWARNING behaviour may be enabled/disabled by a MTIOCTOP
operation. The default action is to not have EARLYWARNING enabled-
but this may be reversed by an option ST_ENABLE_EARLYWARN in
the kernel build.
1998-07-30 00:55:20 +00:00
4205ca3d2a
opt_scsiverbose.h now is opt_scsi.h and contains the defopted
...
SCSIVERBOSE and the new ST_ENABLE_EARLYWARN.
1998-07-30 00:49:19 +00:00
perry