hwr
59acb69be1
Add (commented out) 'gre' pseudo device line. Feedback is welcome.
...
Inspired by Klaus Klein.
1998-11-25 20:30:44 +00:00
mycroft
63f7ee9e53
Return instructions can also be unconditional branches.
1998-11-25 13:58:49 +00:00
mycroft
8fbc327df1
DDB needs the stack pointer at the time of the fault to single step through
...
returns. So, adjust the trap frame format to store sp.
1998-11-25 13:09:14 +00:00
mycroft
f4b034d33a
First whack at making single-stepping work through switch and return
...
statements.
1998-11-25 06:41:26 +00:00
drochner
1e2b2f29f2
one more (last?) wdc_channels adaption
1998-11-22 14:55:29 +00:00
drochner
e1244719fd
oops - forget update for wdc_channels definition change
1998-11-22 14:36:38 +00:00
thorpej
5f0577babc
Adapt to the new scsipi_adapter interface.
1998-11-19 21:43:00 +00:00
mrg
db3051d720
fix problems in many d_mmap routines:
...
- returned EOPNOTSUPP rather than -1.
- no check for negative offset.
many of these fix potential security problems in these drivers.
XXX XXX XXX
the d_mmap cdev routine should be changed to have a prototype like:
paddr_t (*d_mmap) __P((dev_t, off_t, int));
by someone!
1998-11-19 15:38:20 +00:00
mrg
e9b43366f3
add some shiny happy egcs braces
1998-11-17 12:11:27 +00:00
oster
cf5710c839
Added a (commented out) configuration line for the RAIDframe device driver.
1998-11-16 16:44:55 +00:00
mycroft
09093330b1
Add {LONG,WORD}_BIT and {DBL,FLT}_{DIG,MAX,MIN}.
1998-11-16 04:12:29 +00:00
mycroft
56aafbe295
Remove bogus change that cause cpu_fork() to panic.
1998-11-13 09:19:26 +00:00
oster
c74d32c5fc
Updating of bdev's and cdev's to support RAIDframe.
1998-11-13 04:47:03 +00:00
thorpej
49c62c4336
Changes to support fork_kthread():
...
- cpu_set_kpc() now takes void *arg third argument, passed to the
entry point.
- cpu_fork() allows parent to be non-curproc iff parent is proc0.
When forking non-curproc, assume its state has already been saved.
- Adjust various pieces of machine-dependent code to account of all of this.
1998-11-11 06:41:23 +00:00
mark
85d4fddd28
Use the footbridge pci bus space tags when attaching a vga console so
...
that the wscons code will recognise them later and correctly setup
cn_tab when the wsdisplay device is attached.
1998-11-10 04:34:05 +00:00
mark
c082b04018
Implement a separate function to set up the pci io and mem bus space
...
tags.
1998-11-10 04:32:03 +00:00
mark
e695fe5347
Implement bus_space_copy_region_2() for footbridge tags.
1998-11-10 04:29:21 +00:00
mark
096ffe523f
Fix a couple of string buffer overruns in lpt_ofisa_md_match()
...
From Richard Earnshaw, fixes PR6210.
1998-10-28 04:21:57 +00:00
thorpej
56066ad5fb
Add media list, media list count, and default media arguments to
...
ne2000_attach().
1998-10-28 00:13:47 +00:00
tron
b296275bb4
Defopt SYSVMSG, SYSVSEM and SYSVSHM.
1998-10-19 22:09:13 +00:00
mellon
8a9206b6fd
Add CAPS_IS_CTL option
1998-10-18 12:21:51 +00:00
drochner
2468738337
change handling of libkern:
...
-sys/lib/libkern builds as library per default (as it was documented all
the time)
-ports able to LKM set "KERN_AS=obj" explicitely in their Makefiles
(for now; should depend on actual "option LKM" or -better- functions
included for LKM use should be pulled in by a stub)
-always link libcompat before libkern - libkern stuff can be referred to
by libcompat, but not the other way
1998-10-15 18:37:13 +00:00
augustss
797eea8ae5
Add a sequencer pseuso device since we have a MIDI device.
1998-10-14 11:13:14 +00:00
bouyer
aaa8f8b183
Patch from Mark Brinicombe for arm32 config with the new ide system.
1998-10-12 16:13:03 +00:00
bouyer
19fddaeeb5
Merge bouyer-ide
1998-10-12 16:09:10 +00:00
mark
c70acc4a87
Add console initialisation for wscons via VGA.
...
Use the boot options console=xxx to select the console where xxx is
vga, fcom or com.
1998-10-12 03:32:51 +00:00
mark
91a04b5d0c
Define __HAVE_NWSCONS
1998-10-12 03:12:37 +00:00
scw
bdf8d911fc
Clear 'cold' to zero at the end of configure(), where it belongs.
...
(This used to be done in machdep.c, but thorpej recently zapped
that one ;-)
1998-10-10 19:15:32 +00:00
thorpej
908cdfe4e3
Add scsibus entry points to the cdevsw[].
1998-10-10 02:00:49 +00:00
thorpej
29d472f53d
Garbage-collect the open_target_lu and close_target_lu entry points from
...
struct scsipi_adapter; they were not used.
Add a scsipi_ioctl entry point to struct scsipi_adapter. This will be
used to issue ioctl commands to the host adapters.
Inspired by PR #6090 , from Matt Jacob.
1998-10-10 00:28:28 +00:00
mark
45a8df778f
Remove some unnecessary includes.
1998-10-09 00:17:20 +00:00
mark
8d41878215
Add pckbc device, keyboard and mouse and wskbd and wsmouse via pckbc.
1998-10-08 01:59:22 +00:00
mark
d21eb4802d
Rename the pckbd attribute to avoid clashing with the pckbd device
...
from dev/pckbc/*
Include files.pckbc
1998-10-08 01:50:28 +00:00
thorpej
5a687aeb55
cold is already set to false at the end of configure().
1998-10-06 20:55:38 +00:00
mark
6465aead84
Use braces instead of brackets to surround the SET_ICUS macro.
1998-10-06 02:43:26 +00:00
mark
de39833622
Add wsdisplay, wsmouse and wskbd devices.
1998-10-06 02:41:22 +00:00
mark
2bcc60adc6
Add declarations for wsdisplay, wsmouse and wskbd.
1998-10-06 02:40:13 +00:00
mark
edbbf502ab
Add wscons devices and options.
1998-10-06 02:39:00 +00:00
mark
8a012b843b
Include files.wscons
...
Add files.pckbc (commented out, pending fixing SHARK configs).
1998-10-06 02:37:59 +00:00
mark
08fbcdd506
Fix bug with the return value in filecore_label_locate(). This bug caused
...
an assertion to fail in disksubr.c if a label was written to a disk with
a filecore partition at the start of the disk.
1998-10-06 01:47:53 +00:00
mark
b4dba57069
Footbridge based kernels do not need constab.
1998-10-05 16:03:04 +00:00
mark
e605a01dce
Footbridge based kernels don't use dev/cninit.c
1998-10-05 15:41:19 +00:00
mark
5d9338a24b
Don't put the fcom device in constab.
1998-10-05 02:46:31 +00:00
mark
664d0f374c
Base configuration for CATS kernels.
1998-10-05 02:43:43 +00:00
mark
35f31dce6e
Implement consinit() here instead of using the arm32/machdep.c version.
...
Use information passed from via the boot arguments to determine which
device to use as the console.
Add support for initialising the CATS ISA subsystem.
During the early bootstrapping use fcomcnattach()/fcomcndetach to enable
debug and diagnostic information to be sent to the diagnostic serial
port. This is only used during the early part of initarm() until things
have been relocated and the real console can be initialised().
1998-10-05 02:40:26 +00:00
mark
8909a4e529
Define both EBSA285 and CATS bootinfo structure magic numbers.
1998-10-05 02:36:49 +00:00
mark
4d8d0f4e6d
Define fcomcnattach() and fcomcndetach() functions for the diagnostic
...
serial port.
Disable the old probe and init functions as we no longer use constab and
cninit().
1998-10-05 02:36:02 +00:00
mark
0d3d74ceeb
Footbridge based systems don't use cninit() so don't use the version of
...
consinit() defined here.
1998-10-05 02:33:46 +00:00
mark
86a0875460
Add dsrtc device and associated file.
1998-10-05 01:21:39 +00:00
mark
f452e15aff
Add a driver for the Dallas Semiconductor RTC found on CATS motherboards.
1998-10-05 01:20:57 +00:00
mark
18ccba3b4e
Make sure ISA interrupts have been setup prior to configuring devices.
...
This is not nice and a better solution is needed. Really this should be
done when the PCI-ISA bridge is discovered but it is possible that
some PCI interrupts may be routed via the ISA interrupt controller
and thus this needs setting up first.
1998-10-05 01:17:55 +00:00
mark
91eeeff347
Add support for interrupts that are actually routed via an ISA interrupt
...
controller.
(I'm not happy with this approach but it works so I'll use it for the
moment until I complete run-time selection of the interrupt handling based
on recognised hardware).
1998-10-05 01:09:38 +00:00
mark
197c78db08
Prototype isa_intr_alloc() (Needed by ISA PnP code) and sysbeep().
1998-10-05 01:05:00 +00:00
mark
100a13e50a
Add ISA legacy mode support. Currently this is used by CATS kernels
...
which routes the PCI IDE interrupts in a similar fashion to i386 machines
(i.e. on ISA irq14 & 15).
1998-10-05 01:03:52 +00:00
mark
dda219af66
Add file arm32/isa/isa_cats_machdep.c.
...
Build isa/isa_io.c and isa/isa_io_asm.S for both SHARK and ISA systems.
1998-10-05 01:01:43 +00:00
mark
c2d2dca344
Initial commit of ISA bus support for CATS machines (DC21285 based
...
motherboards).
1998-10-05 01:00:57 +00:00
mark
60e0cbbab8
Use sysbeep() rather than beep_generate for consistancy and the sysbeep
...
device.
KNF a chunk of this file.
1998-10-05 00:53:47 +00:00
mark
67d78e486f
Remove beep related stub code now we have a sysbeep device.
1998-10-05 00:51:21 +00:00
mark
8eca271694
Add sysbeep device.
1998-10-05 00:49:13 +00:00
mark
ae4624b175
Add sysbeep device with ISA and VIDC attachments.
1998-10-05 00:44:45 +00:00
mark
6f5d4c52a1
sysbeep device attachments for vidc based audio systems.
1998-10-05 00:42:41 +00:00
mark
5f37409d37
Implement sysbeep device for ISA systems. This just hooks into the pcppi
...
code.
1998-10-05 00:41:31 +00:00
mark
20122120a2
Add arm32/isa/joy_isa.c and arm32/isa/joy_isapnp.c
1998-10-05 00:39:44 +00:00
mark
5fe09f2a80
Add ISA and ISAPNP attachments for joysticks.
1998-10-05 00:35:40 +00:00
mark
7a9e6fd3f7
Remove dead FPE option.
1998-10-04 19:03:37 +00:00
matt
e19b4629ab
Use wd.h, not wdc.h -- we are checking for the presence of disks, not
...
controllers. (there may be a controller which has only an atapibus
but no wd disks).
1998-10-02 01:37:51 +00:00
mark
7af1966350
Regenerate from podules.
1998-09-26 03:30:50 +00:00
mark
a96d8e733a
Add EESOX manufacturer ID and SCSI2 podule ID.
1998-09-26 03:29:36 +00:00
mark
bc3dce964b
Declare the coda character device functions here.
1998-09-22 03:42:10 +00:00
mark
2a4d75715c
cfs/CFS -> coda/CODA in strings.
...
Move the cdev declaration for the code filesystem to conf.h
1998-09-22 03:40:42 +00:00
mark
5a0ae6393f
Make isa_bs_subregion() work.
1998-09-22 01:47:53 +00:00
mark
f26ab10148
Spring clean this file.
...
Include dev/isa/files.isa and remove all the mess that is now included
in files.isa
1998-09-22 01:45:47 +00:00
mark
9bdaa48cd5
Hey, lets try using arm32/isa/joyvar.h instead of the bebox one ;-)
1998-09-22 01:42:21 +00:00
mark
03d5fdff96
Fix slightly liberal use of #ifdef DEBUG in last commit.
...
If we get a data abort in SVC mode it is BAD and we cannot recover
so we always want to panic.
1998-09-22 01:40:28 +00:00
mark
6ce4eb9769
We now use the MI wdc/wd drivers so this code is no longer needed.
1998-09-22 00:44:20 +00:00
mark
4f7b1f2739
Removed icside_io.c
1998-09-22 00:43:18 +00:00
mark
a77e995d18
This file is no longer needed with the rewritten attachment to use the
...
MI wdc driver.
1998-09-22 00:42:40 +00:00
mark
071b4fc4d2
Re-written the wdc attachments to attach to the MI wdc driver instead
...
of the MD one.
1998-09-22 00:40:37 +00:00
mark
4494dc9cfc
Removed MD wdc/wd files.
...
Include dev/ata/files.ata and using dev/ic/wdc.c for everything.
1998-09-22 00:37:51 +00:00
mark
aa9401f832
Fix calculation of I/O range when printing child information.
1998-09-22 00:33:51 +00:00
thorpej
2671c2fa42
Make bus_dmamap_load_uio() work, from Kevin Lahey <kml@nas.nasa.gov>.
1998-09-21 22:51:56 +00:00
tv
d909dcee1c
Do not print, or even compile in, non-fatal diagnostics unless DEBUG is set.
1998-09-21 11:24:11 +00:00
mark
53f576f788
bus_space_copy_* -> bus_space_copy_region_*
...
Add BUS_SPACE_COMPAT_OLDDEFS for bus_space_copy_* compat.
1998-09-20 03:37:29 +00:00
mark
7482a84e6a
Be less verbose during various data aborts unless DEBUG is defined.
1998-09-18 04:09:57 +00:00
mark
9f474557fe
Allow boot arguments to override the host id on a per instance basis.
1998-09-18 03:23:19 +00:00
is
95807e512a
Garbage collect unused 3rd parameter to comprobe1().
1998-09-16 21:30:58 +00:00
thorpej
e30eafbbc6
Need 29 longs for jmp_buf now; signal mask is 128 bits.
1998-09-14 18:06:01 +00:00
thorpej
cbfc257eda
sigset13_t -> int.
1998-09-14 02:48:33 +00:00
mycroft
fa31b94af9
Fix omission in previous; remember to record that we're on the signal stack.
1998-09-13 11:57:58 +00:00
thorpej
1a5b3601cb
Make signal delivery work again.
1998-09-13 08:19:49 +00:00
mark
84f15d23f4
Fix bug in switch_exit() from last commit. This fixes PR 6132.
...
The bug is that the modification to call exit2() removed a stack pop
but not the associated push.
1998-09-10 02:16:28 +00:00
phil
feb70ddafd
Add coda file system character file device.
1998-09-09 19:04:04 +00:00
thorpej
70e641047c
In cpu_coredump(), use MID_MACHINE rather than MID_* (whatever it expands
...
to).
1998-09-09 11:17:24 +00:00
thorpej
8abe0d6b1c
Adjust for the new "reaper" kernel thread: do not free the vmspace and
...
u-area in machine-dependent code. Instead, call exit2() to schedule
the reaper to free them for us, once it is safe to do so (i.e. we are
no longer running on the dead proc's vmspace and stack).
1998-09-09 00:07:48 +00:00
mark
f157d15a41
Guard inclusion of opt_cputypes.h
1998-09-08 03:10:07 +00:00
mark
0c2564ec4a
Remove some unused variables.
1998-09-06 04:25:15 +00:00
mark
f21d591227
Convert bzero() to memset().
1998-09-06 04:24:18 +00:00
mark
f472d5f788
Include machine/intr.h.
1998-09-06 04:22:43 +00:00
mark
249cdfe998
Convert b*() functions to mem*().
1998-09-06 04:20:37 +00:00
tv
a3da712ec1
Add netbsd_sdboot and explain the differences between the kernels.
1998-09-06 03:38:56 +00:00