c0b20561f7
regen
1999-11-04 16:18:41 +00:00
9df6f09e30
Add Aureal AU8820
1999-11-04 16:02:20 +00:00
fb580e3f6e
Regen.
1999-11-04 10:34:40 +00:00
1289659618
Add SBLive!
1999-11-04 10:34:03 +00:00
c8532c3ebe
regen
1999-11-04 09:39:17 +00:00
dbfcb792e1
add Xircom X3201-3 Fast Ethernet Controller
1999-11-04 09:38:38 +00:00
0588cdfc88
Update user-level PPS-API to match -05 draft.
...
Change PPS_<xxx> ioctls to PPS_IOC_<xxx>.
1999-11-04 05:33:58 +00:00
bd0928e723
find "SUNW,hme" as well as "hme". this matches the onboard
...
ultra2 hme. haven't actually tested this beyond it probing
because my scsibus is hanging. anyway, it reports:
hme0 at sbus0 slot 14 offset 0x8c00000 vector 21 ipl 6: address 08:00:20:8f:7f:8f
1999-11-04 05:31:38 +00:00
97bbad1f0b
Do rd/line and rd/mult on the MX98725 and LC82C115, too.
1999-11-04 01:27:32 +00:00
e3f20e8ff1
Use Memory Read Line and Memory Read Multiple on the 21140, 21140A,
...
21142, and 21143, if the PCI bus says its okay.
1999-11-04 01:20:55 +00:00
a4e1bde0b3
Print out if the read {line,multiple} and write/invalidate commands are
...
okay to use.
1999-11-04 01:03:34 +00:00
ca9b9a3b2e
Adapt to mii_phy_probe() change.
1999-11-04 00:24:00 +00:00
bedeeb9896
Allow mii_phy_probe() to be called multiple times, and allow the caller
...
to specify either the PHY number or the PHY `offset' (1st, 2nd, 3rd, etc.)
to configure.
1999-11-04 00:22:07 +00:00
3750d3f592
Update for ifmedia changes.
1999-11-03 23:07:10 +00:00
1e460723a5
Don't flag an error when doing ioctl() on a mux without any
...
multiplexees. Should fix PR 8723.
1999-11-03 22:48:38 +00:00
bc82bff1dc
Don't add any loopback versions of media, for now.
1999-11-03 22:32:45 +00:00
8fc600c3b1
Clean up the code that adds media a little, and make media selection
...
table-driven in preparation for some other changes to be made.
1999-11-03 22:30:32 +00:00
e017601bd3
More or less completely rewrite the way DECchip media is handled, and
...
add support for the DECchip 21142/21143 SIA/SYM media. Make the Macronix
98713 behave like a 21140A, and the 98713A and later behave like a 21143.
Nuke all of the Macronix-specific Nway code, as it will be identical to
the 21143 Nway code once it is written.
1999-11-03 22:25:08 +00:00
eb16cd3aa7
Define DECchip 21142/21143 register bits, and since the Macronix chips
...
are nearly perfect 21143 clones, delete a bunch of redundant info in that
section of the file.
1999-11-03 22:22:49 +00:00
94b8f863fa
Don't use structs for BI space definitions, use offsets.
1999-11-03 21:57:40 +00:00
31ba134e32
use __vax__ and __i386__ instead of vax and i386
1999-11-03 20:50:17 +00:00
f13d3f5b3b
from jason:
...
avoid biodone()ing the original buf twice when a component buf
gets an error. fixes PR 8704.
1999-11-03 16:04:03 +00:00
d2b362b685
Only update the cursor state if it's enabled.
1999-11-03 15:55:27 +00:00
4f1f2c6398
Fix silly error that caused the secondary channel to be ignored if the primary
...
channel was disabled.
1999-11-03 14:54:07 +00:00
3b576cc6b2
Update.
1999-11-03 12:11:26 +00:00
3fc5780b19
Allow irq 15 since some clones use it.
1999-11-02 23:35:02 +00:00
361b083d4c
Shorten some delay()s. From WITEK Wnuk <witek@atari.org>
1999-11-02 17:48:01 +00:00
35483ee3bf
Set mixer controls after a reset.
1999-11-02 17:05:05 +00:00
b952f8727b
Print a little more information when attaching.
1999-11-02 16:54:27 +00:00
b536890c88
Add a mixer control for the Master Volume Mute knob.
1999-11-02 12:11:42 +00:00
72a864f78c
Add the midibus attribute to the fms driver.
1999-11-02 11:58:06 +00:00
8f94bda30c
Add new font sets - VT220 8x8 and 8x10.
...
I brought them from arch/i386/isa/pcvt/Util/fonts.
You can specify FONT_VT220L8x8 or FONT_VT220L8x10 in a configuration file.
1999-11-02 10:25:22 +00:00
bc18b45323
Clean up attachment printing a bit.
1999-11-02 05:41:27 +00:00
09c41837ce
Fix crash when both 1370 and 1371/1373 devices are configured.
...
Update documentation links.
XXX The initial volume of the 1371 mixers is set to 255. Should be ~200.
1999-11-02 05:40:59 +00:00
c8852145bc
Get fms MPU and OPL module inclusion right.
1999-11-02 00:29:20 +00:00
3c40153ea9
Fold some long lines and make it compile with the new auconv functions.
1999-11-01 23:26:58 +00:00
7c8206c662
Add a missing file for the fms driver.
1999-11-01 21:54:12 +00:00
8cd393778b
Regen.
1999-11-01 20:43:51 +00:00
684aa0605c
Add FM801 audio device driver. From Witold J. Wnuk ww181302@zodiac.mimuw.edu.pl
...
Closes PR kern/8729.
1999-11-01 20:43:12 +00:00
860ebb7a92
Make little endian and big endian version of all functions
...
that deal with 16 bit samples. Let the drivers decide which ones
to use.
1999-11-01 18:12:19 +00:00
fb4a4525a8
Be cautious about the blocksize returned by the hardware driver to
...
avoid division by 0.
1999-11-01 18:06:36 +00:00
88f1d44cc2
Change the interface of cardbus_function_enable() and
...
cardbus_function_disable().
1999-11-01 09:59:23 +00:00
8553661a5e
Maintainance the name of Ricoh PCI-CardBus bridges.
1999-11-01 08:58:45 +00:00
d094848950
uncomment fxp_cardbus
1999-10-31 15:14:17 +00:00
b0e5ebfddc
commit a more working version if this driver; so far only tested on an
...
Intel `PRO/100 LAN+Modem56 CardBus II'
1999-10-31 15:12:39 +00:00
8efdaab402
Fix the size of start_sector, end_sector and end_sector_l0. (I'm just going to
...
assume the Linux people will also fix this, since I reported it to them.)
1999-10-31 14:03:16 +00:00
6346873ea6
Use the right attribute for attaching USB controllers.
...
From MAEKAWA Masahide <bishop@rr.iij4u.or.jp>
1999-10-30 17:03:30 +00:00
98b5a519ce
In sddump(), check sd->sc_dev.dv_flags once sd has been initialised.
...
Patch supplied by tsutsui@ceres.dti.ne.jp in kern/8708.
1999-10-30 16:35:12 +00:00
db05febdfa
Add enable/disable support and EEPROM size selection, prerequisites
...
for getting the cardbus fxp attachment to work.
Tested on the built-in 82559 in a VAIO Z505S.
From Johan Danielsson / PR8631; changed slightly to KNF.
1999-10-30 16:07:58 +00:00
3d0e8ae9dd
Make this file compile again by using the same names as in pcidevs.
1999-10-30 16:02:28 +00:00
a498fbea5f
Add midibus attribute for eap.
1999-10-30 14:11:16 +00:00
b9451ead47
remmove unncecessary empty line.
1999-10-30 12:07:08 +00:00
fc21ddd943
Call epstop at the beginning of epinit, especially to make sure that
...
ep_tick is untimeouted before new one is scheduled. This makes 3C574-TX
works at least in 10Mb/s mode.
1999-10-30 01:35:47 +00:00
3f199cc5e4
Add and delete a reference to an adapter at aicattach(), to make sure
...
that the adapter is disabled even if it wasn't enabled/disabled during
configuring its children. This fixes the bug that if an aic pcmcia card
is inserted in a slot during boot, further attaching of any card on the
slot fails once the card is removed.
1999-10-30 00:58:32 +00:00
613db45d20
Add MIDI support.
...
Closes PR 8578.
1999-10-29 23:03:18 +00:00
b2db663942
fix entry for lemac on isa. add entry for wavelan on isa
1999-10-29 21:38:04 +00:00
5fcccf1e9c
Add a placeholder for the ISA WaveLAN card
1999-10-29 21:35:43 +00:00
471ab17680
Regen.
1999-10-29 21:31:30 +00:00
c707186f57
Add AHA-1480 (adaptec cardbus scsi)
1999-10-29 21:30:19 +00:00
12c16f443f
DEC specifies that dealing with CSR0 in the interrupt routine must be
...
done in a special order. Do that here also, but for now inside #ifdef vax
because of the (possible) impact on other arch's.
Now vaxen without IOMMU can use the MI LANCE driver.
1999-10-29 19:50:07 +00:00
e45ef6abcd
Emulate the Linux DVD_* ioctls(2). This gets us 90% of the way to running the
...
LiViD DVD player. (See forthcoming mail to current-users.)
XXX NOTE: We should do something to probe capabilities, rather than allowing
these ioctls on any device.
1999-10-29 15:02:56 +00:00
ee08428d1c
handle multi function cards
1999-10-29 12:02:13 +00:00
1ea6cd1de0
add cardbus_exrom.c to cardbus device
1999-10-29 11:31:40 +00:00
54fed4c419
add support for reading memory mapped CIS via BAR or EXROM register
1999-10-29 11:30:27 +00:00
65c3b4c4c7
Maintainance the name of Ricoh PCI-CardBus bridges.
1999-10-29 07:57:38 +00:00
47fc621312
Remove unnecessary check in cardbusmatch.
1999-10-29 07:29:08 +00:00
dd9c83a378
Change cardbus messages when cardbus does not configured.
1999-10-29 07:27:43 +00:00
9d820e6fab
Add some 21142/21143 goo.
1999-10-28 23:32:37 +00:00
8ff7881953
add macro to get ROM image number, given a CIS pointer
1999-10-28 22:29:04 +00:00
12d5a03a7f
code to read PCI expansion ROM
1999-10-28 22:27:00 +00:00
77ee68352f
regenerate
1999-10-28 20:00:29 +00:00
2acce3142f
Add BayStack 650 802.11 FH card
1999-10-28 19:59:31 +00:00
652701006d
Fix suspend/resume-related problems observed on fxp0 on Sony Z505S:
...
Symptoms: system would crash with "data modified on free list" pool
panic from the mbuf cluster pool shortly after a resume. The cluster
in question contained a valid 82557 receive descriptor and an IP
packet. Happened sporadically in normal use. Easiest way for me to
reproduce it was to run tcpdump and a flood ping and do a
suspend/resume cycle or two.
Changes:
- in interrupt handler, if the interface isn't in IFF_RUNNING state,
just ack interrupts and return; don't try to receive packets, queue
new descriptors, etc., etc.,
- add power control hook to take interface down on suspend,
and restart it (if it was up) on resume.
- tweaks to fxp_stop and fxp_shutdown to avoid recursive panics due
to the (now fixed) bug.
1999-10-28 19:21:51 +00:00
7c3f92fd69
Remove f/w from tree. The licences are not acceptable to TNF.
1999-10-28 16:13:43 +00:00
44c603dd7b
Remove reference to loadable f/w.
1999-10-28 16:11:19 +00:00
38cae5303b
Remove htopci(). bus_space_write_4() takes care of necessary endian conversions.
1999-10-28 13:49:19 +00:00
9388a61d05
Add a few more tests for safety.
1999-10-28 12:08:38 +00:00
061402cc4a
add
...
SOCKET LOW POWER ETHERNET Compact Flash Card.
1999-10-28 09:21:46 +00:00
0f51f21761
add entry Corega PCC-TX PCMCIA card.
1999-10-28 08:12:14 +00:00
357dc256c9
Make sure read() and write() fails on the control pipe.
1999-10-28 07:28:51 +00:00
a6e07f236b
Sorry backout Patch about COREGA FAST_ETHER_PCC_TX.
1999-10-28 07:21:28 +00:00
e33e7aa647
Regen.
1999-10-28 06:41:40 +00:00
786bc11173
Another device...
1999-10-28 06:41:13 +00:00
312acdff00
add Corega PCC-TX PCMCIA Card (not CardBus but 100Base-TX) Entry.
1999-10-28 06:38:51 +00:00
7227a97ad0
I was misinformed. I cannot get away from specifying tags for FC. Some devices
...
are happy w/o them- some are unhappy (IBM drives).
1999-10-28 02:50:34 +00:00
5ef42fc055
Regenerate.
1999-10-27 19:10:58 +00:00
5a76bfb229
Yet another Fujitsu Ethernet card.
...
Contributed by HEO SeonMeyong in PR 8658.
1999-10-27 19:10:02 +00:00
00ba1a42eb
Fix a braino in some currently-disabled code.
1999-10-27 19:05:44 +00:00
040891d3e1
regen
1999-10-27 15:12:28 +00:00
c48725b28e
PR/8692: maximum entropy: Recognize Creative SB Awe 64 joystick.
1999-10-27 15:11:56 +00:00
4d92da53d4
allow mapping of the expansion rom
1999-10-27 14:14:18 +00:00
132b3f5e57
add Expasion ROM register (0x30);
...
fix typo in Cardbus_conf_write
1999-10-27 14:09:52 +00:00
d9c500abb3
(cardbus_attach_card): don't mask everything *but* the latency timer
1999-10-27 14:01:04 +00:00
8ecf3c7c3e
Add support for ES1371. From OpenBSD and Ezra Story <ezy@panix.com>.
1999-10-27 13:20:34 +00:00
91cbb40ee5
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 13:18:02 +00:00
91b09f5b16
Change cardbus API. The first argument of cardbus_mapreg_map() is
...
changed to struct cardbus_softc * from cardbus_devfunc_t. The old
function is renamed to Cardbus_mapreg_map().
1999-10-27 10:04:41 +00:00
7b66141eed
Use opt_cardbus.h for cardbus.c and opt_cardslot.h for cardslot.c.
...
Remove unnecessary include from cardbus.c.
1999-10-27 09:29:18 +00:00
5cf97491d8
Add a temporary kludge to recognize PMAGD (HX+) as 'sfb' hoping 8bpp
...
configration of it is compatible enough with PMAGB-BA.
1999-10-27 04:32:35 +00:00
0263d8db3d
Do not stop no matter when pci_mapreg_map fails to map bridge socket
...
registers. When it fails, reset Socket Base Address register and map
registers using rbus.
1999-10-27 00:48:36 +00:00
fb6f289535
nuke a debug printout I thought was already gone
1999-10-26 22:23:20 +00:00
29dd0803eb
allow to wildcard the serial channel
1999-10-26 18:20:44 +00:00
0247fe44f6
regen
1999-10-26 12:35:14 +00:00
7254017312
remove duplicate entry
1999-10-26 12:34:41 +00:00
9eed0f5d8a
change PMAF-F to PMAF-FA for consistency, add some more stuff
1999-10-26 12:23:13 +00:00
95c618a810
- Fix bogus cursor drawn by sfb_cursor(). From eye-opening input from R.C.
...
Dowdeswell.
- Remove write memory barriers in sfb_copyrows() as dst. is always distant
enough from src. for copying rows.
1999-10-26 10:57:04 +00:00
b4fc704a74
avoid cast
1999-10-25 19:39:54 +00:00
87568e8d82
defopt the XNS protocol (options NS), clean up the use of related
...
option headers / defines
1999-10-25 19:18:10 +00:00
0021900156
Add a missing '\n' in the cmd0640 attach printfs.
1999-10-25 14:13:12 +00:00
1eb80cc225
Make the SPLUSBCHECK diagnostic test silent durning cold boot.
1999-10-25 10:51:46 +00:00
0ce4b38e23
Add some code for recording, still untested.
1999-10-25 10:16:49 +00:00
419ec27c34
Wrap a line properly.
1999-10-24 15:14:57 +00:00
c5542264f1
- New option (RASOPS_SMALL) for the tight-fisted.
...
- Don't use int32_t/u_int32_t unless we must.
- Remove C++ single line comment delimeters that crept in.
- Remove defs pertaining to byte granularity 'ragged-edge' bitmasks.
- Move all declarations of per-depth initialization functions to rasops.h.
- Other minor cleanup.
1999-10-23 23:14:13 +00:00
64643af801
Add description of the hd64570 chip. Add brief description of this driver.
1999-10-23 22:20:11 +00:00
fd992c5320
Prepare a little for the addition of an interface to user-space.
1999-10-23 16:26:32 +00:00
a28e3fec43
Fix PR8666, to verbose diagnostics.
1999-10-23 00:21:01 +00:00
864ff761d7
remember to initialize mailbox 2 for FC isp bus resets
1999-10-22 17:06:12 +00:00
21636a326b
Fill always erased regions with bg color. Fix an issue revealed by
...
"print -n '\033[7m'; ls".
1999-10-22 07:42:05 +00:00
9d3c1407f7
If IRQ was not for us, add back WDCF_IRQ_WAIT to the flags, so that
...
the next IRQ (real or timeout) will be handled.
Fixes the 'missing untimeout' problem reported by a few peoples, and
kern/8639.
1999-10-21 14:37:58 +00:00
a5b6bed471
Add a macro to extract the isoc type.
1999-10-20 21:02:39 +00:00
4c4a056bc5
fix typo in previous commit.
1999-10-20 16:39:11 +00:00
8a5c548579
cosmetic changes before i do some functional changes.
1999-10-20 16:34:22 +00:00
a2369d8e97
Cancel active transfers on aic/wdc detach.
...
Also makes LS-120 drive works for me again.
1999-10-20 15:22:24 +00:00
b4e3ec7f3d
Don't restrict the ethernet portion after modem portion. It prevents
...
us from using some config entries (com at 0x3xxx).
1999-10-20 14:57:57 +00:00
b3e97ca54b
Nuke some silliness.
1999-10-20 12:27:38 +00:00
eccc3630ec
DPT_MORE_TIMEOUT was scaled wrong.
1999-10-20 11:54:10 +00:00
e470fe0db1
Remove Bt459 register layout exposure. XXX Needs consideration about
...
possible merger of SFB+ ASIC and TGA(2)/PCI register definitions.
1999-10-20 02:44:48 +00:00
afc4d36639
Regen.
1999-10-19 21:16:04 +00:00
172180cf42
Add an AltecLansing speaker.
1999-10-19 21:15:35 +00:00
675c12dbcb
- Don't get stalled by a bogus HA_ST_MORE condition.
...
- Don't trust HA_ST_MORE again if the above situation occurs.
- Nuke bitfields in 'struct eata_sp'.
- Don't bother using scatter-gather if DMA map contains only 1 segment.
- Return TRY_AGAIN_LATER and not COMPLETE if an EATA command times out.
- Check SCSI status in dpt_inquire(), not just HBA status.
- Some cosmetic changes and sanity checks.
1999-10-19 20:16:48 +00:00
78cc55b359
'<Device>' usually means the string comes from outside the kernel.
1999-10-19 16:04:52 +00:00
fd3561cc02
Preliminary import of 'SFB enhanced' text renderer with many caveats
...
to be corrected. Text drawing is now improved significantly, but;
cursor is drawn incorrectly, copycols() trashes a screen, 'standout
(\033[7m)' results in lines reversed entirely until '\033[0m', and
possibly more issues. Not multi-colour, 8bpp only this moment. Costly
write memory barrier instrunctions should be eliminated using framebuffer
address aliasing technique for NetBSD/alpha.
1999-10-19 09:51:17 +00:00
5aa225ed2e
Disable legacy io port before the bridge is probed as a pcic on isa.
...
Comments ware changed to comply the KNF.
Add PCCBB_PCMCIA_16BITONLY to support TI PCI103X series.
1999-10-19 09:29:46 +00:00
7b3b03bea6
Enable 'WSSCREEN_REVERSE' scr-capability.
1999-10-19 00:49:33 +00:00
02bd5fa80e
Split wsdisplay_usl_ioctl() into two functions -- one which is screen-dependent
...
and one which isn't. The latter is now used for ttyEcfg, enabling the
VT-switching ioctls to work on it. (This allows Linux X servers to work when
/emul/linux/dev/tty0 is linked to /dev/ttyEcfg.)
1999-10-19 00:03:18 +00:00
9cce953883
Don't panic so easily on failure; just issue notification.
1999-10-18 21:59:19 +00:00
80b776d037
Use NMPU instead of NMIDI so that it can compile without mpu attachment.
...
Requested by Izumi Tsutsui.
1999-10-18 05:11:39 +00:00
d935a73378
nuke RCS "Log" and "Header" tags. They cause problems for third parties
...
importing our sources, and for NetBSD release engineering folks.
(They've been against the NetBSD coding style forever, but they crept
in anyway.)
1999-10-17 23:53:45 +00:00
db3b140df8
Handle the (weird) case when the power hook is called with a resume
...
without a prior suspend.
1999-10-17 15:31:00 +00:00
2674b15280
Don't call dk_establish() on vax either.
1999-10-17 09:44:48 +00:00
46f1868fe7
Cosmetic changes.
1999-10-17 06:22:05 +00:00
de4b3a819a
ENODEV is not a value supposed to be assigned to xs->error. Use
...
XS_DRIVER_STUFFUP instead.
1999-10-17 06:13:01 +00:00
cdad48e3b7
Oops- missed a MAXISPREQUEST sized thing- these are all gone now. It's amazing
...
this didn't eat me.
1999-10-17 02:40:26 +00:00
4938c2371d
Some stylistic changes, but also use the new INT_PENDING macro. Start
...
tracking LIP sequence numbers.
1999-10-17 01:38:27 +00:00
4fdbb0d1a0
mostly stylistic
1999-10-17 01:37:34 +00:00
c525e6fa14
add INT_PENDING macro
1999-10-17 01:37:12 +00:00
5781cfe433
some comments added
1999-10-17 01:23:21 +00:00
2b4cd26aa4
stylistic cleanups
1999-10-17 01:22:08 +00:00
d8e5f3ab24
Add a DIAGNOSTIC to check that the polling flag is set when resuming.
1999-10-16 15:35:18 +00:00
f65479526f
Correct a spelling mistake.
1999-10-15 21:53:02 +00:00
8b18a2785a
Regen.
1999-10-15 14:42:17 +00:00
tsarna