20edddd023
KNF the code and fix three bugs:
...
* If a non-zero addr was given to rbus_space_alloc_subregion() it would
claim to have allocated region when in fact it just failed.
* If a non-zero addr was given to rbus_space_alloc_subregion() allocation
often (always?) failed when it shouldn't.
* One part of rbus_space_alloc_subregion() used an alignment that always
made the kernel panic.
I'm not sure if my change is correct, because I don't know what this code
is supposed to do. But now I can use a 3c562 card.
2000-05-08 14:00:05 +00:00
fd36bc02a6
Swap the order of disabling the function and disestablishing the interrupt
...
on detach. This avoid accessing unmapped registers on multi-function cards.
2000-05-08 13:53:32 +00:00
621323af72
KNF some comments.
2000-05-08 13:51:36 +00:00
3a6e3a4670
Add (sometimes commented out) MIIVERBOSE option.
2000-05-08 13:49:44 +00:00
e169e0018c
Regen.
2000-05-08 13:26:05 +00:00
43c5780ae1
Allow a verbose description to be printed with the option MIIVERBOSE.
2000-05-08 13:25:34 +00:00
56aa5c16d1
Add another AMD chip.
2000-05-08 13:23:21 +00:00
05f0b17555
Make pci_get_capability() work correctly on both header type 0 and type 2
...
devices; both have different Capability List Pointer registers.
2000-05-08 10:52:38 +00:00
085ec82073
Add a register offset for the Capability List Pointer in header type 2.
...
XXX Ideally the PCI-Cardbus Bridge header should be restructured to just
XXX present standard register definitions, making it ~safe to be included.
2000-05-08 10:45:52 +00:00
de328af944
Fix a inverted logic botch introduced in rev. 1.35, typically causing
...
cb_chipset() to return the wrong chipset type.
2000-05-08 07:31:20 +00:00
a7fb64072e
Fix the RCS tag format. Duh.
2000-05-08 03:11:06 +00:00
f8e0411615
Make the audioamd assembler code compile again.
2000-05-08 03:09:54 +00:00
f5bd37be57
Make the SPARC audioamd driver at least *compile*. Well, the C code, that is.
...
*sigh*
2000-05-08 02:44:31 +00:00
5ebece6b49
Use ES to address the partition table when checking if we need to use
...
int13 extensions. Fixes PR 9676.
2000-05-07 22:58:58 +00:00
8651580247
man page is written, remove it from TODO
2000-05-07 20:47:10 +00:00
8ee4c016eb
PCI product codes for Yamaha YMF744B (DS-1S) YMF754 (DS-1E) audio chips.
2000-05-07 17:00:06 +00:00
0d57ac396d
Product codes for Yamaha YMF744B (DS-1S) YMF754 (DS-1E) audio chips.
2000-05-07 16:56:34 +00:00
f7e2752025
Change one 0 for bootverbose to 1 if DEBUG is defined.
2000-05-07 14:59:23 +00:00
20ae91400c
Add a dummy bootverbose.
2000-05-07 14:49:11 +00:00
21942247f3
It is a bad idea to declare a static bootverbose variable here. Remove it.
2000-05-07 14:43:31 +00:00
41dc1a6839
Avoid stomping on the W0_CONFIG_CTRL register which seems not to be
...
implemented on EISA cards. This makes a 3Com 3C597 Fast Etherlink TX
work for me at last, fixing PR kern/7067.
2000-05-07 14:03:25 +00:00
4a351b20bc
Minimized io ports reserved by this driver to the ports actually needed.
...
Fixes PR kern/5279 for this driver.
2000-05-07 13:57:16 +00:00
4211fcfd7e
remove unnecessary output to console
2000-05-07 13:50:10 +00:00
701eaba273
add the #71 NODEV entry for bktr to the chrtoblktbl list.
2000-05-07 08:32:50 +00:00
7392f90215
multiple inclusion protection
2000-05-07 03:01:58 +00:00
3d3dc5c594
add one
2000-05-07 01:46:01 +00:00
9bd6bb5e81
Auto-adjusting vfs.nfs.iothreads: when mounting the first nfs
...
filesystem, if the number of threads is "-1", meaning it's never been
set, then set it to 4. You can override by setting this to some other
number (including 0) before or after mounting, of course.
Thanks to whoever it was that suggested this on ICB... sorry I don't
remember who.
2000-05-07 01:38:36 +00:00
2f7dba9ea1
compilation fix
2000-05-07 01:16:23 +00:00
784bcfd6ba
add bktr device
2000-05-07 00:41:06 +00:00
eb37e6442b
also add cdev_decl for bktr
2000-05-07 00:38:39 +00:00
6e87b42ecd
bktr driver added
2000-05-07 00:31:42 +00:00
188ac21f3f
add bktr
2000-05-07 00:29:19 +00:00
006e9528a1
install bt8xx.h for bktr
2000-05-07 00:29:03 +00:00
4caea4817d
some glue for bktr-driver
2000-05-07 00:25:58 +00:00
5f8b869a3e
Some NetBSD specific changes; also TODO, and import script, based
...
on bind2netbsd by Bernd Ernesti
2000-05-07 00:24:33 +00:00
c2f780fbfd
Import of (finally busspaced) bktr-driver from FreeBSD (part 2).
...
This version is from the location specified in the README, modified
by bktr2netbsd, to be committed later.
2000-05-07 00:17:13 +00:00
8b27ce1a70
Import of (finally busspaced) bktr-driver from FreeBSD (part 1).
...
This version is from the location specified in the README, modified
by bktr2netbsd, to be committed later.
2000-05-07 00:16:17 +00:00
26f708a5a3
Handle the Linksys USB100H1 like the other Linksys adapters.
...
Restructure the code a little.
2000-05-06 20:38:59 +00:00
fd58a6ae12
Regen.
2000-05-06 18:28:36 +00:00
13d8353ffc
Add Linksys USB100H1, an Ethernet and HomePNA adapter.
2000-05-06 18:28:01 +00:00
90f481ef3f
Handle large offsets with very small options correctly.
2000-05-06 16:35:14 +00:00
82cfd6b42a
Simplify an expression.
2000-05-06 14:35:28 +00:00
4c46b93c8d
Add bba.
2000-05-06 14:34:31 +00:00
d8fe118608
- Remove three unused contants; KERNBASE, KERNTEXTOFF and BTOPKERNBASE.
...
- Protect #include <machine/intr.h> inclusion with #ifdef _KERNEL.
- Correct the case when "opt_gateway.h" is refered.
2000-05-06 05:55:09 +00:00
0cb6da487c
Remove unused mapin(pte, v, pfnum, prot) macro.
2000-05-06 05:19:32 +00:00
0ce52a2a08
implement U2P PCI support in psycho_init. this is completely untested.
2000-05-06 04:15:35 +00:00
176e840713
GC in_interfaces.
2000-05-06 02:41:32 +00:00
5e209d22f7
Print the usual interrupt line.
2000-05-06 00:46:19 +00:00
6a1547768c
Typos.
2000-05-06 00:44:00 +00:00
737dec82d6
Change the way LFS does block accounting, from trying to infer from the
...
buffer cache flags, to marking the inode and/or indirect blocks with a
special disk address UNWRITTEN==-2 when a block is accounted for. (This
address is never written to disk, but only used in-core. This is essentially
the same method of block accounting as on the UBC branch, where the buffer
headers don't exist.) Make sure that truncation is handled properly,
especially in the case of holey files.
Fixes PR#9994.
2000-05-05 20:59:20 +00:00
0b2854eb6c
Fix for lint during build of libc.
2000-05-05 20:12:00 +00:00
2b44ae84ee
LP64 printf fix. (I wish size_t was unsigned long on all platforms).
2000-05-05 17:52:38 +00:00
650107086a
remove superfluous test (snd_una is always > iss since th_ack must > iss
...
(first test at start of case) and th_ack is assigned to snd_una).
2000-05-05 15:05:29 +00:00
5a6e4c896c
From PR #3733 : Only disarm timer if SYN contained the ACK bit since if
...
it didn't it would be a crossing/simultaneous SYN and doesn't mean the
remote TCP received our SYN.
2000-05-05 14:51:46 +00:00
e991ee6035
Use correct file name for amd7930.
2000-05-05 14:19:25 +00:00
f622dc8618
Define some more bits in the MXCC control register.
2000-05-05 11:07:15 +00:00
904ca34539
Ops, restore sync/wide parameters after a reselect.
...
Also, better handling of parity errors.
2000-05-05 09:32:48 +00:00
4c9516aa3b
Rework the command queue, to avoid having commands blocked at the end
...
of the queue. Load is now properly balanced across all disks of the same bus.
2000-05-05 09:05:44 +00:00
b5393f9387
correct in6_ifdetach() (previous code touched dangling pointers).
...
actually the corrected portion was never visited.
2000-05-05 08:03:12 +00:00
ee733492dd
Add licenses.
2000-05-05 03:27:22 +00:00
95f3c9498d
MIPS_INT_MASK_CLOCK and INT_MASK_REAL_DEV are deprecated.
2000-05-05 03:18:25 +00:00
b3b709b6e2
Add comment pointing to __NetBSD_Version__ in sys/sys/param.h, which
...
needs updating too if the OS release is bumped.
2000-05-05 01:13:07 +00:00
b193ffa77c
Use __GNUC_PREREQ__().
2000-05-05 00:20:22 +00:00
2fffc76da2
Add a new macro, __GNUC_PREREQ__(major, minor) which tests to see if
...
the compiler is GCC and at least the version specified by <major,minor>,
and use it in a few appropriate places in this file.
2000-05-05 00:19:04 +00:00
020e448c4b
Regen
2000-05-04 21:56:47 +00:00
c60bd75960
Added lchflags and issetugid
2000-05-04 21:52:32 +00:00
40a7f5d1f1
Oops, must bump version letter here also. (Thnx, Bernd!)
2000-05-04 20:18:32 +00:00
c82c8655cf
Add comment suggesting s/com[0-9]/com*/ and s/lpt0/lpt*/
...
if you enable com*/lpt* at pnpbios0, to avoid attaching
com0 as com3.
Don't actually change the "com0 at isa" line, since doing so
would cause some com* (e.g. pcmcia) to be renumbered from com3
to something lower, at least on some systems.
2000-05-04 19:41:44 +00:00
642275fec4
Bump revision letter due to recent struct rtentry changes. Still one to go :-)
2000-05-04 17:34:28 +00:00
8a9c114515
Change rt_refcnt from short to int, to allow more than 32k routes thru
...
one interface without unexpected side effects.
2000-05-04 17:33:03 +00:00
fc89ce9f53
Oops, nuke unused structure member.
2000-05-04 17:27:25 +00:00
2306b4a34e
When a WDTR message is rejected, initiate sync negotiation anyway.
...
When a SDTR message is rejected indicate that target is async
Add a missing bus_dma_sync call.
2000-05-04 17:18:27 +00:00
f5b572d26b
- LP64 issues in debug printfs.
...
- on a phase mismatch, do byte recovery only if we were in data phase.
Otherwise just clear the fifo.
- Properly handle reject of a sync or wide negotiation.
2000-05-04 16:56:13 +00:00
babd44e7a1
Ops, regen siop.out from the last siop.ss.
2000-05-04 15:44:35 +00:00
c8ff442f72
Add a flag hold in scratcha0, set when we're doing a data transfer. Used
...
for save data pointers.
2000-05-04 15:42:42 +00:00
9601a833c3
Remove wmipsdbg and wmipsrel as well as WMIPSDbg and WMIPSRel for
...
case sensitive file system.
2000-05-04 11:58:22 +00:00
f056a711d7
Add some lines to support ATAPI and SCSI devices.
...
This makes the kernel 60KB bigger.
2000-05-04 10:32:47 +00:00
d865561de6
Raw keyboard mode support. I'd tested this on MC/R530.
...
I don't sure if skbd work or not.
2000-05-04 10:25:45 +00:00
fe8142f713
Raw keyboard mode support. I'd tested this on MC/R530.
...
I don't sure if skbd work or not.
2000-05-04 08:18:59 +00:00
33698fcc25
Mouse move event should be made before mouse bown event. Without that,
...
you may got a mouse down event in strange plase.
2000-05-04 06:14:05 +00:00
f077f10640
fix scancode -> keycode mappings:
...
MC-CS arrow keys
PV-6000 semicolon and apostrophe
2000-05-04 02:24:13 +00:00
d3d81e3ad6
Make varargs and stdarg work with GCC 2.96 and later.
2000-05-03 21:54:06 +00:00
33e0776eda
Remove junk after #undef.
2000-05-03 21:41:43 +00:00
468985f608
Adjust asm statement for newer GCCs.
2000-05-03 21:32:59 +00:00
319d44bfb1
Adjust asm patterns for newer versions of GCC.
2000-05-03 21:20:07 +00:00
5a5c88dc4e
`typedef void ifnet_ret_t;' isn't valid C -- use #define, instead. Also,
...
don't abuse the C preprocessor.
2000-05-03 21:08:02 +00:00
081e7cbdaf
`typedef void ifnet_ret_t;' isn't valid C -- use #define, instead.
2000-05-03 20:52:29 +00:00
f73803d1ce
Fix printf() format.
2000-05-03 20:17:37 +00:00
3afc302a93
ctob() -> ptoa(), to fix sign-extension issues when using >2GB. A more
...
comprehensive change will be necessary for >4GB, but that's a bigger issue.
2000-05-03 20:02:08 +00:00
b29178acf3
Remove unnecessary junk on #undef line that some C preprocessors
...
get cranky about.
2000-05-03 19:19:04 +00:00
e37397c2e8
`typedef void ifnet_ret_t;' isn't valid C -- use #define, instead.
2000-05-03 19:17:54 +00:00
ab635a46d3
Slight change to previous.
2000-05-03 19:15:27 +00:00
2d66ccbd13
Don't return an uninitialized error code.
2000-05-03 18:58:37 +00:00
01e8438aa8
Fill in ccb->ccb_req.sgcount with the value that's guaranteed to
...
be initialized.
2000-05-03 18:58:15 +00:00
02710dee26
Make the ntfs entry in fscknames NULL - there is no fsck_ntfs.
...
Pointed out by Andy Doran in private e-mail.
2000-05-03 18:28:46 +00:00
d0d92c23d0
Use USBD_NORMAL_COMPLETION in the previous.
2000-05-03 18:21:36 +00:00
ffe599486c
When emulating UHF_PORT_POWER for the internal hub, make sure to initialize
...
the status return value.
2000-05-03 18:14:49 +00:00
cd1719f273
Remove obsolete comment.
2000-05-03 14:53:15 +00:00
4d573016ed
Let MULTIPROCESSOR && LOCKDEBUG case compile again
2000-05-03 13:53:59 +00:00
bd2d21b5d1
Display the VPD's PrintableModel item on startup.
2000-05-03 11:39:54 +00:00
21dea2100c
Resolve conflicts.
2000-05-03 11:12:03 +00:00
8bcd56bd12
make lkm_name in struct lkm_* a const
2000-05-02 22:13:20 +00:00
3bb9a5f666
- do sync/wide negotiation
...
- use a circular queue for the start slots, so that order has better chances
to be preserved.
2000-05-02 19:03:02 +00:00
ad9dd901f1
mbr partition table parameter is little endian.
...
need to bswap.
2000-05-02 18:19:01 +00:00
93f867f485
LABELOFFSET 42 -> 64
2000-05-02 18:13:04 +00:00
2ed0c0fe88
add cn_bell to struct consdevs pccons.
2000-05-02 18:11:07 +00:00
89cb6ad8b8
forgot to commit TX3912.
2000-05-02 18:00:54 +00:00
3c873423e1
add ioctl, mmap.
...
hpcfb directly attach to tx3912video and plumvideo. (no longer use bivideo)
XXX CLUT
2000-05-02 17:50:51 +00:00
9dccb575be
change hpfcb_cnattach interface to adopt current implementation.
2000-05-02 17:45:15 +00:00
a5ff71cecc
One more __attribute__((__packed__)) to dissuade egcs from making
...
unwarranted asumptions about the structure's alignment.
2000-05-02 14:15:07 +00:00
c49e7076d3
Simplify pmap_page_protect(); modelled after a similar change by
...
Art Grabowski in Openbsd.
2000-05-02 13:06:27 +00:00
aee9bb5b5f
IPv6CP support. if IPv6 link-local address is configured to the interface,
...
the interface tries to negotiate ifid with the other end by using IPv6CP.
other changes:
- do not share ppp sequence number across protocols.
- if LCP proto-rej is received, drop the protocol mentioned by the message.
this is to be friendly with non-IPv6 peer (if the peer complains due to
lack of IPv6CP, drop IPv6CP). this basically implements "RXJ+" state
transition in the RFC.
- cleanup debugging message. always print blank just before message.
CAVEAT:
- if the peer uses the same MAC address as our side (pretty unlikely)
the code may go into req-rej loop.
- even though we negotiate ifid, we don't configure destination address
onto the interface. it is not really necessary to do so (IMHO).
- I've tested this code on a NetBSD 1.4.2 node, which was with fair amount
of modifications. not sure if the committed code does it right... (please
test and send reports)
2000-05-02 12:43:16 +00:00
9f9f06401c
Add (commented out) cms(4) driver.
2000-05-02 11:00:56 +00:00
d46e0d77c0
Remove unused code: getptesw4m(),setptesw4m()
2000-05-02 10:35:06 +00:00
716a862d08
Lock internals have changed, and we depend on those in here.
2000-05-02 09:29:39 +00:00
8abcd395fd
Add bba(4) attachment.
2000-05-02 08:04:24 +00:00
e15d2472fa
Fix typo.
2000-05-02 08:03:53 +00:00
087a67c892
Add proper bba attachment. From Gregory McGarry <g.mcgarry@ieee.org>
2000-05-02 08:02:07 +00:00
c6df4d8830
Comment out bba since I don't really know if it's right.
2000-05-02 07:23:56 +00:00
05ef4c3d35
Add bba(4) attachment at tc.
2000-05-02 07:22:26 +00:00
621ef4d785
Add am7930 audio driver.
2000-05-02 06:43:05 +00:00
361f2141f7
Adapt to new am7930 driver. PR 10033 from Gregory McGarry.
2000-05-02 06:35:12 +00:00
f9dbbf4c92
Make am7930 driver machine independent. PR 10032 from Gregory McGarry.
2000-05-02 06:30:49 +00:00
39f8e55cfc
On the m68k, the most efficient type for __cpu_simple_lock_t is
...
an unsigned char, since that is what the `tas' instruction uses.
While I'm here, implement the __cpu_simple_lock family of routines.
Why? One, because they're easy. Two, so Steve can get master/slave
MVME systems talking across the backplane. :-)
2000-05-02 05:17:45 +00:00
855b79db92
Let each platform typedef the new __cpu_simple_lock_t, which should
...
be the most efficient type used for the atomic operations in the
simplelock structure, and should also be __volatile.
2000-05-02 04:41:04 +00:00
8185691694
- If a platform defines __HAVE_ATOMIC_OPERATIONS, use them for counting
...
in the MULTIPROCESSOR case.
- Move a misplaced #ifdef so that LK_REENABLE actually works.
2000-05-02 04:32:33 +00:00
8ca78ff825
In siop_lookup_product(), actually check the PCI *vendor* ID as well as the
...
product ID.
Prevents false matches of other devices, such as the DEC 21050 ppb.
2000-05-02 03:59:35 +00:00
712326ecbd
Traditionally, the floppy controller was configured at 0x3f0 for 8 ports,
...
but the registers actually begin at 0x3f2, and this is what PNPBIOS reports
for the floppy controller resources. Adjust the register offsets and the
mapping of them for the ISA front-end to compensate, so that the PNPBIOS
attachment of the floppy controller actually works.
2000-05-02 03:33:45 +00:00
5e915fcab9
Nuke some dead code.
2000-05-02 03:32:09 +00:00
c7d698ac41
Support recording conversions that change the sample size. PR 10029, from Gregory McGarry.
2000-05-02 00:00:00 +00:00
2365a92cb5
Add Creative Music System driver. From Gregory McGarry <g.mcgarry@ieee.org>
2000-05-01 22:48:33 +00:00
4e1e58e353
Change the way the codec is access to mimic how Linux&FreeBSD does it.
2000-05-01 17:15:41 +00:00
07f142cd50
Add some more debug output.
2000-05-01 17:10:40 +00:00
91ec70f36d
- De-inline VA2PA(); it isn't in any time-critical path. Saves a bunch of space.
...
- Disable special-cased viking cache flushing in setpgt4m(). This work-around
should no longer be necessary.
- Remove some misc. dead code.
2000-05-01 15:19:46 +00:00
9498452c05
- Move some initialization into MI rl_attach() from each bus attachment.
...
- Use proper CARDBUS_* macro in if_rl_cardbus.c
- Use product ID read from PCI configuration space rather than from EEPROM
in if_rl_pci.c.
Patch sent from Masanori Kanaoka <kanaoka@ann.hi-ho.ne.jp> and
some cosmetic changes by me.
2000-05-01 15:08:50 +00:00
d4ac7f24ca
Implement HyperSPARC specific pmap_{zero,copy}_page functions.
2000-05-01 14:06:41 +00:00
784c538c3f
Add definitions of HyperSPARC block fill/copy ASIs.
2000-05-01 14:05:53 +00:00
8ddd256f57
Call uvm_pageidlezero() in idle loop.
2000-05-01 12:11:50 +00:00
a5a1a12d83
#define __SIMPLELOCK_LOCKED and __SIMPLELOCK_UNLOCKED.
2000-05-01 12:09:32 +00:00
0344f24921
Like, really block soft clock interrupts.
2000-05-01 10:52:29 +00:00
2c9e3487e0
Bump default data size to 32 MB.
2000-05-01 10:43:42 +00:00
ac6e6c980d
Add Seeq 8003 register definitions.
2000-05-01 08:06:17 +00:00
6bd45ff6c3
We should not report button down event while we don't know where it occur.
2000-05-01 07:40:05 +00:00
7d3231b37a
Mouse move event should be made before mouse bown event. Without that,
...
you may got a mouse down event in strange plase.
2000-05-01 07:36:58 +00:00
a2edf1690f
Fix a declaration inside __ldstub().
2000-05-01 00:46:29 +00:00
e038e8aac1
No need for flushing the cache after zeroing a page uncached.
2000-04-30 23:30:47 +00:00
21666d1ea5
Only call uvm_pageidlezero() if uvm.page_idle_zero is set.
2000-04-30 23:01:24 +00:00
0ba4762798
Define offset for uvm.page_idle_zero.
2000-04-30 22:56:12 +00:00
fec9706315
Remove unneeded #include "mpu.h"
2000-04-30 22:16:56 +00:00
e327115496
FIx declaration in __ldstub.
2000-04-30 22:15:30 +00:00
4a30060c43
Add C-Media CMI8x38, cmpci.
2000-04-30 22:00:54 +00:00
aaa405eab7
Add driver for C-Media CMI8x38 Audio Chip. From Takuya SHIOZAKI <AoiMoe@imou.to>
2000-04-30 21:59:58 +00:00
6832a2d6c9
Arrange to call uvm_pageidlezero() from idle loop.
2000-04-30 21:32:44 +00:00
88fc960805
Define offset for uvm.page_idle_zero.
2000-04-30 21:29:16 +00:00
1b8cac1bd9
Implement MXCC versions for pmap_{zero,copy}_page().
2000-04-30 21:22:28 +00:00
78391926bf
Allow for CPU specific page clear and page copy functions.
2000-04-30 21:09:43 +00:00
d7592a72fe
Update comment in adw*
2000-04-30 19:08:19 +00:00
1dbea6c0f9
Add new microcode for all of the supported boards.
...
Fix minor glitches.
Add preliminary support for ASB-3940U3W host adapters; it might work w/ autotermination on.
ASB-3940U3W support is not yet tested due to lack of board.
2000-04-30 18:52:14 +00:00
ff84aeb762
Add ASB-3940U3W host adapters (AdvanSys)
2000-04-30 18:46:18 +00:00
77e7c7ee2c
skbd_ioctl (not implemented yet) returns -1 not 0.
2000-04-30 18:43:37 +00:00
d2679acf60
Add ASB-3940U3W host adpeter (AdvanSys)
2000-04-30 18:34:53 +00:00
a8580db029
Revert 1.18 change.
...
Hopefully this is a temporary fix; something might be missing in
the SCSI negotiation.
2000-04-30 16:06:20 +00:00
99ef6f17b5
Remove not-so-useful `#if DEBUG' code.
2000-04-30 14:23:29 +00:00
3c5ac0b689
Rename MXCC control register.
2000-04-30 14:19:37 +00:00
7373241c4c
Rename MXCC control register.
...
Add MXCC stream register definitions.
2000-04-30 14:18:52 +00:00
439b360ab9
Modify EEPROM read functions and handle also 9356 EEPROM.
...
Fixes kern/9861.
2000-04-30 12:00:40 +00:00
e623cd6f8f
Discard these old leftovers from the IMP and trailer days!
2000-04-30 11:50:50 +00:00
c7204b15d4
Ubareset() changed.
2000-04-30 11:47:21 +00:00
6f6bea9eed
Change to use new ubareset() functionality.
2000-04-30 11:46:49 +00:00
6758522763
Add function uba_reset_establish() to register reset functions like
...
uba_intr_establish(). Basic framework for resource (BDP) allocation,
not yet finished.
2000-04-30 11:46:03 +00:00
8995505723
Rewritten (most of) the DEUNA/DELUA driver. No more data copy, packet
...
header fiddling and forget driver support for trailers.
2000-04-30 11:43:26 +00:00
26d692df9e
Use DHCP, not BOOTP. At least with dhcpd, the root path gets dropped due to
...
lack of space in the reply when using BOOTP.
2000-04-29 22:18:31 +00:00
1e0aa36da8
ECOFF hook is in arch/mips.
2000-04-29 21:47:59 +00:00
f820567ce2
Allow non-pmax to use COMPAT_ULTRIX.
2000-04-29 21:47:13 +00:00
a1bad64e9a
exec_ecoff.h is not used here.
2000-04-29 21:45:27 +00:00
1dcdb13c04
Implement __cpu_simple_{,un}lock{,try}(), modeled after the Alpha
...
implementation.
2000-04-29 19:39:51 +00:00
082109d0e4
Move free page zeroing to before the whichqs spinner. Pointed out by simonb.
2000-04-29 14:44:42 +00:00
dc8f3d3b3f
Oops, install <machine/lock.h> on these systems, too.
2000-04-29 03:45:42 +00:00
f51470a514
Require that each each MACHINE/MACHINE_ARCH supply a lock.h. This file
...
contains the values __SIMPLELOCK_LOCKED and __SIMPLELOCK_UNLOCKED, which
replace the old SIMPLELOCK_LOCKED and SIMPLELOCK_UNLOCKED. These files
are also required to supply inline functions __cpu_simple_lock(),
__cpu_simple_lock_try(), and __cpu_simple_unlock() if locking is to be
supported on that platform (i.e. if MULTIPROCESSOR is defined in the
_KERNEL case). Change these functions to take an int * (&alp->lock_data)
rather than the struct simplelock * itself.
These changes make it possible for userland to use the locking primitives
by including <machine/lock.h>.
2000-04-29 03:31:45 +00:00
37f567639c
Test whether the filesystem is an LFS before trying to read the alternate
...
superblock (whose disk address is stored in the primary superblock). Also,
refuse to mount a filesystem whose superblocks overlap or where the alt.
superblock has a lower disk address than the primary superblock.
Solves PR#10001.
2000-04-29 00:23:00 +00:00
73ac8c709b
Add a concept of the `background attribute'. This is the same as the
...
current attribute, but has all non-color flags turned off. Use this when
doing erasure, as this allows us to optimize repainting in curses.
XXX The way the default attribute is handled is totally bogus and needs to
be fixed.
2000-04-28 21:56:16 +00:00
23bcab075a
Don't request sense after INQUIRY. From FreeBSD & OpenBSD.
2000-04-28 21:34:05 +00:00
d2e2dce826
Regen.
2000-04-28 20:54:39 +00:00
0b9c397110
Add 2 more eap audio devices.
2000-04-28 20:54:10 +00:00
9c2835a1c4
Make sure to read the clock before we leave the 'cold' state.
2000-04-28 19:58:04 +00:00
2cfb26c801
Zero free pages in the idle loop.
2000-04-28 19:25:55 +00:00
4cacfc5684
change 10base-t media _setting_ to set autodetect instead.
...
Contrary to what the rtl8019 docs say, this seems to be necessary.
Observed by myself when implementing non-auto earlier, and independently
complained about by Antti Kante in PR 9962.
2000-04-28 17:49:03 +00:00
bd5f21ffeb
add PCIBIOS_ADDR_FIXUP, PCIBIOS_IRQS_HINT configuration. and its sample.
2000-04-28 17:23:51 +00:00
78a464a74d
Add microtime().
2000-04-28 17:23:40 +00:00
cc30f00dd3
PCI I/O address fixup routine.
...
When BIOS don't asign PCI I/O address space to device,
allocate it without conflict and write to PCI configuration header.
2000-04-28 17:19:10 +00:00
e3c3882828
PCIBIOS_IRQS changed to PCIBIOS_IRQS_HINT. PCIBIOS_IRQS_HINT is
...
used when no IRQ guess. when at least 1 PCI device configured
correctly, unused.
2000-04-28 17:15:15 +00:00
bbb8c56fcb
add PCI_MAPREG_PPB_END (PCI-PCI bridge) PCI_MAPREG_PCB_END (PCI-Cardbus bridge)
2000-04-28 17:12:45 +00:00
99e6adf31e
Adapt to cpu_intr() change.
2000-04-28 15:55:51 +00:00
db06ac868b
Attach cac* and ca*.
2000-04-28 13:51:56 +00:00
8f9b06a9e6
- Enable ca(4) device.
...
- Fix a couple of nits.
2000-04-28 13:50:25 +00:00
ab2d7be096
Add missing cdevsw and chrtoblktbl entries.
2000-04-28 13:28:42 +00:00
3c359c262d
The size of the members of struct ultrix_utsname were nothing like
...
reality - adjust and fill in "version" the same way that some other
compat routines do. An Ultrix "uname -a" returns something meaninful
now instead of just "NetBSD ".
2000-04-28 12:52:52 +00:00
308fa27a0d
Unmute some mixer controls by default. From OpenBSD.
2000-04-28 12:39:59 +00:00
520f9dc581
pasfind(): avoid silly bug - if bus_space_map() of SB I/O space failed,
...
we used bad label and tried to bus_space_unmap() invalid memory
region
Fixes port-i386/9992 by Jarkko Teppo <jate@uwasa.fi>.
2000-04-28 08:51:42 +00:00
e3d2f0ae85
delete obsolete 'options MIPS_16K_PAGE'.
2000-04-28 07:19:33 +00:00
augustss