b8b9e0bd1e
move to sys/dev/sbus for lebuffer driver (old path never existed anyway)
1998-07-27 05:52:21 +00:00
36ee8a045b
use lebuffer.c from dev/sbus.
1998-07-27 05:49:02 +00:00
c5e180526b
these have moved to sys/dev/sbus.
1998-07-27 05:48:42 +00:00
06d5ffd2a8
enable kernfs and mfs.
1998-07-27 05:45:17 +00:00
b0b64545e8
Add cs* at isa? port 0x300, wildcard IRQ and memory address, to pull
...
them from the EEPROM. Wildcard DRQ to force memory-mode operation; this
value is not available in the EEPROM and must be configured manually.
1998-07-27 01:57:56 +00:00
fca2dc28ac
Add cs0 at isa? port 0x300, wildcard IRQ and memory address, to pull
...
them from the EEPROM. Wildcard DRQ to force memory-mode operation; this
value is not available in the EEPROM and must be configured manually.
1998-07-27 01:51:29 +00:00
9b35e91d59
Update for cs* at ofisa?
1998-07-27 01:44:20 +00:00
803df07221
Obsolete.
1998-07-27 01:43:24 +00:00
6d885615a2
Obsolete.
1998-07-27 01:42:19 +00:00
6828d39080
Actually provide the correct bus space tags.
1998-07-27 00:48:15 +00:00
9e8d90ed5c
Add a cpu-specific function to flush a pure virtually-indexed/virtually-tagged
...
cache, which needs to be flushed at context switch.
1998-07-26 23:35:32 +00:00
4998ae50c0
Define hypersparc instruction-cache flush ASI.
1998-07-26 23:29:58 +00:00
b9aeeb3fa1
Remove a test, making diagnosis of IRQ problems easier.
1998-07-26 21:24:37 +00:00
80104fac9f
Use wscons attachments for USB keyboard and mouse.
1998-07-26 17:45:53 +00:00
a211774da1
Fix typo with new poolpage stuff
1998-07-26 10:15:36 +00:00
8ed2fad5f9
Add missing trailing $ to $NetBSD$ line (PR #5530 ).
1998-07-26 09:47:22 +00:00
b454e7c097
Add mainbus0 and cpu definitions, remove extra DS_5100 option.
1998-07-26 09:45:25 +00:00
a799083fba
Fix netboot support for 3100/m76 which uses diagmem for its lance buffers.
1998-07-26 09:01:23 +00:00
8eebf1cfc5
yet more atomic operations accessing DraCo registers
1998-07-26 06:45:17 +00:00
c6124a986a
This file is no longer used.
1998-07-25 22:19:25 +00:00
6ad50a6691
Allocate physical memory for the pv_table array in bootstrap(), so we
...
don't have to call VM functions from pmap_init().
Use a memory pool for additional pvlist entries (used for double mappings).
Take care of the cacheable bit on pagetables while we're initializing them,
instead of calling kvm_uncache() afterwards.
1998-07-25 22:01:19 +00:00
50f955ff49
Nuke ukbd (USB keyboard) device, we use wskbd now.
1998-07-25 15:39:28 +00:00
db105fc687
Make vtophys() return non-zero even if the addr < end.
1998-07-25 15:06:28 +00:00
401f1157b0
Use atomic operations for DraCo interupt registers
1998-07-25 11:01:11 +00:00
2a78f6986c
no semicolon, please
1998-07-25 09:24:17 +00:00
3d0dcc7181
This has been in amiga/amiga/mtpr.h for a long, long time.
1998-07-25 07:21:20 +00:00
f0ff548dd2
Rewrite the probe to use values from the EEPROM for membase and IRQ
...
if they're not specified by the attach arguments, so that they can
be reported by isaprint(). Rearrange the attach routine to facilitate
splitting this up into front- and back-end drivers.
1998-07-25 01:15:54 +00:00
b4195e59cd
Change the interface to the EEPROM functions such that they can be called
...
from the probe routine.
1998-07-24 23:25:13 +00:00
260b2a20f2
Provide PMAP_{,UN}MAP_POOLPAGE().
1998-07-24 22:03:33 +00:00
91f18e727f
Remove conditionals on SUN4C+SUN4M.
...
A few cosmetic changes.
1998-07-24 21:08:16 +00:00
1ca186e04d
G3 Macs also needs to fix pci io/mem enable bits.
1998-07-24 20:53:57 +00:00
2385ee5eca
Provide PMAP_{,UN}MAP_POOLPAGE().
1998-07-24 20:32:07 +00:00
5cc05df4ca
Comment out "insert root disk..." message.
...
Remove unnecessary video init.
1998-07-24 15:52:04 +00:00
d33dfcd7dc
Coda glue
1998-07-24 15:40:42 +00:00
5f9682b601
Calculate DELAY constant before configure().
1998-07-24 14:40:40 +00:00
4eeeee6a7c
Print a complaint when no children were specified
...
in the config file. Better than a link error...
1998-07-23 23:48:33 +00:00
4a15b6ba7d
Make this like the other redirect includes.
1998-07-23 23:47:02 +00:00
7e0d396bf4
Add xyc to the dev/xy.c line, similar for xd.
1998-07-23 23:45:24 +00:00
f836b9e8d3
Drop private page table list maintenance; use memory pools instead.
1998-07-23 21:42:40 +00:00
1253bfdf46
Utilize the centralized probe function.
1998-07-23 19:32:42 +00:00
8d611b5f32
Remember the product ID and revision.
1998-07-23 19:25:52 +00:00
1c9aed40f6
Round-out full-duplex support.
1998-07-23 19:02:55 +00:00
217addc8de
Option DDB_ONPANIC needs a value.
1998-07-23 13:03:23 +00:00
7cdf5d9a77
retry disk accesses (for shaky floppy drives)
1998-07-23 09:59:44 +00:00
202d438148
CS8900 driver has of_network_dev property.
1998-07-22 22:09:59 +00:00
c10c18b955
Get media from OpenFirmware.
1998-07-22 22:09:18 +00:00
04e498dae6
Change from "-G 0" to "-G0" for egcs.
1998-07-22 19:59:21 +00:00
0751419914
Back out previous change. It breaks Seyon in a non-obvious way.
1998-07-22 19:13:02 +00:00
101f67646c
Add '<ufs/ufs/dinode.h>' to the include list. (Julian Coleman)
1998-07-22 12:49:42 +00:00
05ff8b05f5
Print the default media at attach time.
1998-07-21 23:09:25 +00:00
02ad0b4eda
Add support for ifmedia.
1998-07-21 22:58:31 +00:00
aaa383804d
Correct the name of the CS8920M id.
1998-07-21 19:54:56 +00:00
cc035ff82e
Oops, I forgot to commit this with bus_dma stuff.
1998-07-21 18:01:30 +00:00
0f572b1caa
Preserve OpenFirmware's msr and use it in openfirmware().
1998-07-21 17:53:50 +00:00
49bb9d8214
adapt to LANCE driver split
1998-07-21 17:36:01 +00:00
fc42c3b81d
Continued work on the esp scsi driver. Not yet working, but progress continues.
1998-07-21 06:17:35 +00:00
52cfd19bcf
Ever closer to KNF.
1998-07-21 01:17:14 +00:00
bb3c5257c7
Move the cs8900 driver's softc, etc. definitions to an MI location.
1998-07-21 01:04:55 +00:00
133efc841f
Use <dev/isa/cs89x0var.h>
1998-07-21 01:04:09 +00:00
9c9a866a90
Move PacketPage read/write macros in to if_csvar.h
1998-07-21 00:58:46 +00:00
bdc9dcbe8a
G/c two more unused definitions.
1998-07-21 00:53:57 +00:00
23efef79fc
Move the code that prints Rx errors into a separate function, rather than
...
duplicating it.
1998-07-21 00:52:15 +00:00
9282418a78
Some cosmetic changes.
1998-07-21 00:40:17 +00:00
20fb09c609
G/c more unused debugging goo.
1998-07-21 00:24:45 +00:00
6014ea2216
Garbage-collect some unused debugging goo.
1998-07-21 00:23:18 +00:00
f45804c4c6
Nuke sc_iobase (and a serious misuse of it!)
1998-07-21 00:22:29 +00:00
22ff8accae
Use fixed-size types.
1998-07-21 00:20:35 +00:00
5b56c35223
Nuke the "pia" typedef.
1998-07-21 00:18:35 +00:00
44d02a07d0
Update for <dev/isa/cs89x0reg.h>
1998-07-21 00:11:03 +00:00
57488ef1e4
Remove the register descriptions from this file, and split them into
...
<dev/isa/cs89x0reg.h>
1998-07-21 00:10:11 +00:00
c3e7a09c4e
Use <dev/isa/cs89x0reg.h>
1998-07-21 00:08:57 +00:00
9df67db949
We're not Linux. If we still want driver version strings to be displayed
...
at boot, then I suppose DEBUG is a reasonable compromise.
1998-07-20 21:18:38 +00:00
e99bc6379d
Don't deref a NULL tty pointer in the interrupt routine. This can happen
...
if we're the serial console, we have not yet been open'd, and we get an
interrupt for one reason or another.
1998-07-20 17:35:17 +00:00
e641acf153
In configure(), initialize the HIL driver's software state before enabling
...
interrupts; if there's an interrupt pending (i.e. because the user pressed
a key or moved his mice while the kernel was being loaded), the interrupt
handler may safely be run. Fixes PR port-hp300/5397.
1998-07-20 10:47:50 +00:00
84676442e2
Commented out some bus_dma code, until I can fix.
...
(bus_dma.c needs sync with alpha port!)
Continued progress on scsi driver.
A couple of other compiler warning level of tweaks.
1998-07-19 21:41:16 +00:00
b4b261bbb0
Remove redundant opt_ddb.h
1998-07-19 20:45:26 +00:00
53e3ba1192
Make DDB work again.
1998-07-18 23:02:33 +00:00
6054d626f9
Switching dev/ic/lpt.c to use spllpt() instead of spltty(). It doesn't use
...
tty structures, and on some machines (namely the DraCo internal lpt, and some
multi-i/o boards for Amigas and DraCos), tying spltty to the pretty high printer
interupt level would hurt serial performance.
On all affected ports but Amiga, spllpt() has been defined in machine/intr.h
to be spltty(), thus preserving old behaviour. Portmasters are encouraged to
change is, if they feel something else is better (e.g., one of its own were
possible).
1998-07-18 21:27:25 +00:00
99ff11f6b7
locking now out of main framework for isp_reset/isp_init
1998-07-18 21:02:06 +00:00
50d1442817
Fix PMAP_NEW and make it the default.
1998-07-18 20:35:14 +00:00
52ac5e203e
Precompute lots of bitmasks etc. in serparam(). Results in slightly better
...
(but I suspect, insignificant) performance, and also prepares for 8bit +
parity support.
1998-07-18 20:19:33 +00:00
2948f65db4
Use unsigned comparison of tbreg in delay().
1998-07-18 16:23:44 +00:00
116c3be1e5
In dvma_mapout(), make sure to not overrun the buffer when flushing the cache.
1998-07-17 23:05:35 +00:00
2fc1260cc0
Implement bus_dmamap_load_uio().
1998-07-17 21:09:59 +00:00
f6e8a93bac
Replace hardcoded constant with VM_MIN_KERNEL_ADDRESS.
1998-07-17 19:12:48 +00:00
142429fb34
bus_dma carries TNF copyright.
1998-07-17 19:02:46 +00:00
c11b71818d
Fix typo.
1998-07-17 18:53:19 +00:00
08574665d0
Write (fake) Apple Partition Map when install boot block.
1998-07-17 18:48:37 +00:00
0a6758d760
"chaos" PCI controller support.
...
Clean up.
1998-07-17 18:40:31 +00:00
5f7fef3c79
Add bus_dma support.
1998-07-17 18:38:10 +00:00
fb93315ffc
Change pcitag_t format for bandit.
1998-07-17 18:31:56 +00:00
97081b51be
Make this work for a change.
1998-07-17 02:33:13 +00:00
d2ddbe58a2
Add empty opt_cputype.h to satisfy changes committed during
...
defopt'ing of network options.
1998-07-15 23:57:04 +00:00
bc355c6b3f
new framework
1998-07-15 19:59:45 +00:00
d681d158c7
Remove the raw HYPERchannel kludge.
1998-07-15 17:45:52 +00:00
41986b6ad6
Print out the revision as a letter, i.e. 'A', ...
1998-07-15 03:29:47 +00:00
25a86ef490
Be a little more thorough when printing the chip name, and also print
...
the chip revision.
1998-07-15 00:01:17 +00:00
45c63f6b7b
Massive cleanup of this driver (format police, autoconfig). More to come.
1998-07-14 23:38:49 +00:00
86574cd4f8
patch to add "vi/ve" per PR#4583
1998-07-14 20:29:11 +00:00
1143e585fc
PS -> SR: PS as alias to SR was removed due to conflict with other usage.
1998-07-14 03:19:17 +00:00
32a0c413a5
Oops - check and calculate maxproc with right symbols - maxproc was getting
...
incorrectly reduced for UVM.
1998-07-14 03:17:05 +00:00
dc16918e07
Add support for G3 Mac.
1998-07-13 19:37:28 +00:00
14fd96b811
Get framebuffer address from Openfirmware.
1998-07-13 19:31:53 +00:00
ed1ec91943
Change VM_MAXUSER_ADDRESS to 0x7ffff000.
1998-07-13 19:28:56 +00:00
a0fead97de
Add support for Motorola MPC106.
1998-07-13 19:27:13 +00:00
37c5807bba
Clean up a bit.
1998-07-13 19:22:26 +00:00
209036f339
Revert to previous version.
...
Use ROM font.
1998-07-13 19:14:43 +00:00
d58ad29b6c
Kill the old extern mchkinfo pointer and prototype cpu_mchkinfo().
...
This file has been collecting prototypes and other things used in the MD
code...that's bad...because this is exported to the MI kernel.
1998-07-13 19:10:14 +00:00
48257ecec1
Define cpu_mchkinfo() to locate the mchkinfo struct. This is used to fix
...
the recent bug where Multias around the world have been aborting back to
SRM with no message at all as they tried to attach a TGA or VGA console,
because the old mchkinfo pointer wasn't allocated prior to use.
And contrary to widespread rumour, this bug has nothing to do with my
LCA IDE mod...that worked just fine. "Not guilty."
1998-07-13 19:07:33 +00:00
0d7c1dede9
Use the new cpu_mchkinfo().
1998-07-13 18:49:34 +00:00
96a07e3f99
Use "boot-device" if "bootpath" is not set.
1998-07-13 17:38:37 +00:00
dd998f4113
* Use "boot-device" if "bootpath" is not set.
...
* Reduce code size.
1998-07-13 17:35:55 +00:00
57c3ea15d8
Guard opt_cputypes.h include with _KERNEL && !LKM
1998-07-13 06:12:08 +00:00
1c34e07b3f
worked on adding nextdma support for scsi driver.
1998-07-13 04:01:39 +00:00
0756290d3f
Recognise the ALI M1543 in order to support ALI Aladdin V chipset
...
motherboards.
1998-07-13 03:31:57 +00:00
7778b00444
Recognise the ALI M1541 in order to support motherboards with the
...
ALI Aladdin V chipset.
1998-07-13 03:30:52 +00:00
c9e3235f35
1. Don't deref zero on early machine checks.
...
2. Revert last week's non-KNF {} editing.
1998-07-13 00:14:52 +00:00
deb00272b9
Add USB support. Supported so far:
...
* UHCI and OHCI host controllers on PCI
* Hubs
* HID devices withe special drivers for mouse and keyboard
* Printers
1998-07-12 19:51:55 +00:00
29b6a40f77
Add include to SUBDIR to install the machine includes.
1998-07-12 18:06:54 +00:00
72955c78da
New Makefile to install the includes, like all the other ports do.
1998-07-12 18:06:15 +00:00
1b46ebe1d9
Add elf_machdep.h to the INCS list.
1998-07-12 17:53:29 +00:00
5f59f7e15a
Add i386 relocations.
1998-07-12 17:09:43 +00:00
e2ff73afa7
Compute SFB pixel dimensions at attach time for PMAGB-BB users.
...
(qvss-compat needs revision, but should be replaced with wscons anyway.)
1998-07-12 06:26:37 +00:00
2aaf359b9f
Add m68k relocation types.
1998-07-12 01:39:06 +00:00
639cc899cf
Basic elf_machdep.h for m68k; doesn't include relocations, yet.
1998-07-12 01:17:58 +00:00
1e54ab4262
Reserved 8k at top of memory for ROM. This fixes warp9c boot problems.
...
changed ethernet panic to a warning when out of DMA buffers. This allows
resuming if you sit in ddb too long.
1998-07-11 07:06:16 +00:00
7b04d96d02
Add UVM support to amiga.
...
Use a second free memory list for 16-bit Zorro II memory other than the
first memory segment.
1998-07-10 20:26:35 +00:00
dc9188e3e1
Add UVM support to amiga
1998-07-10 20:23:24 +00:00
6e2d9eae80
Support two free memory lists; second list will be 16-bit Zorro II memory.
1998-07-10 20:16:21 +00:00
9ca2a54c6d
Set soundblaster irq to 5 by default.
1998-07-09 20:59:38 +00:00
d1da31d671
redo the PCI configuration mode detection - should make some less
...
standard compliant PCI chipsets work (Compaq, Connectix emulated Triton)
fix the bug reported in PR port-i386/5727 (soda@sra.co.jp )
1998-07-09 20:19:52 +00:00
7b68890c7f
Fix a problem with the reworked reboot code on the IIci: don't try to
...
reference variables after the MMU is disabled.
1998-07-09 06:02:50 +00:00
7b6cd6a0a6
Guard opt_cputypes.h include with _KERNEL && !LKM.
1998-07-09 02:43:25 +00:00
93ecc95d92
Fix printing of real mem. I'm going to, for right now, leave it to
...
someone else to figure out the best machine independent fashion of
fixing ptoa to handle > 32 bits.
1998-07-09 00:46:17 +00:00
acea5c2e79
add dependency to get the version number right
1998-07-08 17:47:42 +00:00
13b329cdd2
bump version number to reflect the partition ID change
...
(should have been done long ago)
1998-07-08 17:46:21 +00:00
bca69afed6
Place the software PG_EXEC PTE bit into the protection array, instead
...
of OR'ing it in manually.
1998-07-08 17:30:45 +00:00
6b092524ea
stale beer- place structure in right file
1998-07-08 17:20:42 +00:00
a8d2213784
Define a macro that returns the mask of PALcode PTE bits that we care
...
about when determining if a TBI is necessary (i.e. the PALcode bits minus
the FOx bits, since we always track those).
1998-07-08 17:19:46 +00:00
0792d7f3db
Define a shorthand macro that represents the mask of PTE bits that the
...
PALcode cares about.
1998-07-08 16:48:49 +00:00
3f776dfbe2
Cosmetic change.
1998-07-08 16:46:51 +00:00
434b3fe82b
tentative better fix for allocating the correct number of mchkinfo structs
1998-07-08 16:28:25 +00:00
e32f380030
Garbage-collect some of the old ISA DMA code.
1998-07-08 07:56:47 +00:00
8bbd7378c5
RCS ID police.
1998-07-08 07:56:13 +00:00
48abe1f910
From pmap.new.c (UVM case only):
...
Put the first 16M of RAM onto the "first16" free list, and everthing
else onto the default free list.
1998-07-08 05:41:59 +00:00
9bbe01f100
Note that UVM is mandatory on the Shark (otherwise ISA DMA won't work)
1998-07-08 05:27:17 +00:00
ff376fbd03
Doh! Jason caught me being really stupid. There isn't necessarily
...
a linear 0..N mapping out of alpha_cpu_whami - which is what I was
using to index the new cpu machine check array. This is a quick hack
back to just using the first element while I think of a kinder function
that will do the function (per-platform) of whami->VIRTUAL CPU ID, which
if you think about it, is really necessary anyway.
1998-07-08 05:25:40 +00:00
e332a993e2
Initialize the machdep ISA DMA structures once we've done OpenFirmware
...
ISA DMA initialization.
1998-07-08 05:01:56 +00:00
8d10a53ddb
Use MI ISA DMA code (XXX this needs some work).
1998-07-08 05:01:17 +00:00
fcd0183e81
Remove all of the home-grown ISA DMA code, and translate the OpenFirmware
...
"dma-ranges" property into the pmap's ISA DMA ranges.
1998-07-08 05:00:40 +00:00
mrg