optimised assembly versions are in place.
Added support for mounting an NFS filesystem as the root filesystem even
for generic configs.
Don't hardcode the number of spl levels use the define in psl.h
multi-channel driver), or to SCSI_CHANNEL_ONLY_ONE if a
single-channel driver.
(2) use scsiprint() rather than a locally-defined autoconfig print
function, and kill any locally-defined print function.
a char *, because that's what was really intended, and because
if the print function modifies the string, various things could become
unhappy (so the string should _not_ be modified).
core entry points. i.e. the linker does the work rather than the stub code.
Optimised transferring the trapframe between UND32 and SVC32 mode stacks
in the fpe_post_proc handler.
Added experimental code to handle must of userret in UND32 mode. This means
that the copy of the trapframe and the switch to SVC32 mode is only needed
if mi_switch() has to be called. (This saves a vast number of pointless
trapframe copies).
Added branches relative to the start of the module and labels to the various
entry points.
All other offsets are now relative to _fpe_arm_start.
This removes the need for boot time relocation of the FPE.
* Make S expand to an absolute path at compile time.
* Use `-S' rather than `-x' to remove debugging symbols.
* Garbage collect unused variables.
* Reverse a handful of port-specific changes that do not correspond to
the common build model and are not needed.
a boot string for firmware that can do this, such as the SPARC and
the sun3 models. It is currently silently ignored on all other
hardware now, however. The MD function "boot()" has been changed to
also take a char *.
an extended header is present i.e. don't assume an extended header as
however unlikely there could be a podule that doesn't have one.
Calculate an absolute address for the podule's interrupt mask rather
than leaving it relative to the base address of the podule.
If the interrupt status pointers are not present or are zero then
used the default bits as specified in the podule specification to
determine if the podule is interrupting.
chained podule interrupt handlers.
Fill out the ih_maskaddr and ih_maskbits fields in the interrupt handler
structure so that interrupt dispatcher knows where to look to determine
if the handler should be called.
General code tidy up and source code formatting.
chained podule interrupt handlers.
Fill out the ih_maskaddr and ih_maskbits fields in the interrupt handler
structure so that interrupt dispatcher knows where to look to determine
if the handler should be called.
back on timer 1 interrupts if none is specified.
Only set up timer 1 is the driver is using timer 1 interrupts.
Don't claim the interrupt but allow them to be passed on to other
handlers.
Fixed the handling of IPL_NONE.
Debugged support for interrupt chaining.
Fill out the intrnames array with the name of the interrupt handler
currently at the head of the chain.
Guarded several sanity checks with #ifdef DIAGNOSTIC.
Added interrupt chaining.
Removed some dead debugging code.
Guarded several sanity checks with #ifdef DIAGNOSTIC
Make sure interrupts are disable while updating the IOMD interrupt
masks.
Removed several old debugging functions that are no longer needed.
Block interrupts while updating the soft interrupt masks.
Fixed softclock interrupts and added IRQ_SOFTPLIP to the SPL_SOFT mask.
