Aren
/
NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
81,177 Commits 606 Branches 0 Tags 3.1 GiB
Commit Graph

47118 Commits

Author SHA1 Message Date
tsutsui bcdd082840 Add a driver for the Initio INIC-940/950 PCI SCSI controllers. 
Based on OpenBSD's iha driver, and modified some structures by me.

Tested on arc, i386 and macppc.
 2001-06-03 13:43:45 +00:00
bjh21 e1fdb3abbf Rather than duplicating the LDM/STM/LDC/STC fixup code between 
early_abort_fixup() and late_abort_fixup(), have the latter tail-call the
former.  This saves another 200 bytes, and I've found my ARM710a card now, so
I've even tested it.
 2001-06-03 13:38:14 +00:00
tsutsui c9d2bd8419 Sort some entries. 2001-06-03 13:21:28 +00:00
thorpej 4e7cb03446 Differentiate between a DL10019 and a DL10022 (they have slight 
MII differences).
 2001-06-03 04:52:28 +00:00
thorpej 37368cb858 Use the correct bitbang ops on the DL10022 (oops!). 2001-06-03 04:39:52 +00:00
mrg 28bd948dba finish moving context management back to being global. add a new ctx_lock 
for context administration.
 2001-06-03 04:03:28 +00:00
thorpej cc3002d53b Clarify a historical comment. 2001-06-03 03:55:10 +00:00
thorpej f75e45c854 In ti_init2(), use a simpler, more obvious, and correct MTU 
calculation to give the firmware.
 2001-06-03 03:46:43 +00:00
thorpej f2b9a1f3cc Replace a bunch of home-grown Ethernet related constants with 
ones defined in <net/if_ether.h>
 2001-06-03 03:29:44 +00:00
thorpej 7b1b8dd02a Consider the configured MTU of the interface when determining 
if a packet is too large.
 2001-06-03 03:24:23 +00:00
chs 88905c8ca1 clear and restore pcb_onfault around calling uvm_fault(), 
so that bugs in the fault-handling code will panic sooner.
 2001-06-03 03:12:31 +00:00
thorpej 597194532e Add a capability bit that indicates support for Gigabit Ethernet 
jumbo frames, and use it in SIOCSIFMTU.
 2001-06-03 03:07:39 +00:00
thorpej 70b2367cfd 1.5W -- hardware IPv4/TCP/UDP checksumming support. 2001-06-03 02:48:45 +00:00
chs c8642d34a1 let kernfs_mmap() use the default error method. 2001-06-03 02:23:31 +00:00
chs 27e388d697 let portalfs_mmap() use the default error method. 2001-06-03 02:22:40 +00:00
chs 6e2828061f procfs_bmap() should never be called, make it a "bad op". 
let procfs_mmap() use the default error method.
 2001-06-03 02:21:35 +00:00
thorpej f0f999ee47 Skip the pseudo-header checksum if nxt == 0. 2001-06-03 01:37:28 +00:00
matt 9086deaf4d Default to kernel_map if no addr is available. 2001-06-03 00:32:25 +00:00
bjh21 6a32761143 Now that cpu_dataabt_fixup() can fail, print slightly more useful information 
(address and disassembly of the instruction that aborted) when it does so.
 2001-06-02 22:48:40 +00:00
bjh21 3c88c46567 In {early,late}_abort_fixup(), return ABORT_FIXUP_FAILED, rather than 
panic'ing, if we hit an instruction we can't fix up.  This saves 250-odd bytes
of code, and should allow the caller to print a more useful message.
 2001-06-02 22:30:07 +00:00
bjh21 f594a52dae late_abort_fixup: Get the indentation right! 2001-06-02 22:08:11 +00:00
thorpej 9987ee5249 Driver for the Broadcom BCM5201/BCM5202 "Mini-Theta" Ethernet 
PHYs.  This is also the same PHY core as in the 3Com 3c905C.
The PHY is documented in the 3c905C manual.
 2001-06-02 21:42:10 +00:00
thorpej 424f7a1e65 Make PHY matching all table-driven. 2001-06-02 21:39:38 +00:00
bjh21 0c870e10e0 Convert bus_space_{read,write}_multi_1() into macros, since they're just 
wrappers round {read,write}_multi_1() anyway.
 2001-06-02 21:31:02 +00:00
bjh21 54a986d7fc Replace arm6_dataabt_fixup() and arm7_dataabt_fixup() with early_abort_fixup() 
and late_abort_fixup(), based on the abort model in use, rather than the CPU
type.  This cleans up the code and makes it smaller.  Only tested on an
ARM6 -- I can't find my ARM710a card right now.
 2001-06-02 21:03:32 +00:00
bjh21 947699688a Create hcscreg.h, and put a couple of magic numbers in there. 2001-06-02 20:13:50 +00:00
bjh21 7089595665 Initial cpufunc operations for ARM3. Not actually used yet. 2001-06-02 19:01:03 +00:00
chs 821ec03ed9 replace vm_map{,_entry}_t with struct vm_map{,_entry} *. 2001-06-02 18:09:08 +00:00
kristerw 90b4d889db Silent gcc 3.0 warnings that multi-line string literals are deprecated (and 
these literals should not be multi-line. It looks like they became that way
when a developer got a bit carried away when KNFing the code...)
 2001-06-02 17:29:46 +00:00
matthias 0319a3d7bf Add a missing line from i386/i386/pmap.c to make this work again. 2001-06-02 16:47:17 +00:00
thorpej ad9d3794b0 Implement support for IP/TCP/UDP checksum offloading provided by 
network interfaces.  This works by pre-computing the pseudo-header
checksum and caching it, delaying the actual checksum to ip_output()
if the hardware cannot perform the sum for us.  In-bound checksums
can either be fully-checked by hardware, or summed up for final
verification by software.  This method was modeled after how this
is done in FreeBSD, although the code is significantly different in
most places.

We don't delay checksums for IPv6/TCP, but we do take advantage of the
cached pseudo-header checksum.

Note: hardware-assisted checksumming defaults to "off".  It is
enabled with ifconfig(8).  See the manual page for details.

Implement hardware-assisted checksumming on the DP83820 Gigabit Ethernet,
3c90xB/3c90xC 10/100 Ethernet, and Alteon Tigon/Tigon2 Gigabit Ethernet.
 2001-06-02 16:17:09 +00:00
thorpej ca4d373730 Implement support for IP/TCP/UDP checksum offloading provided by 
network interfaces.  This works by pre-computing the pseudo-header
checksum and caching it, delaying the actual checksum to ip_output()
if the hardware cannot perform the sum for us.  In-bound checksums
can either be fully-checked by hardware, or summed up for final
verification by software.  This method was modeled after how this
is done in FreeBSD, although the code is significantly different in
most places.

We don't delay checksums for IPv6/TCP, but we do take advantage of the
cached pseudo-header checksum.

Note: hardware-assisted checksumming defaults to "off".  It is
enabled with ifconfig(8).  See the manual page for details.

Implement hardware-assisted checksumming on the DP83820 Gigabit Ethernet,
3c90xB/3c90xC 10/100 Ethernet, and Alteon Tigon/Tigon2 Gigabit Ethernet.
 2001-06-02 16:17:06 +00:00
toshii 9590a56496 Use bus_space_{read,write}_multi_stream_2 where available. 2001-06-02 15:49:16 +00:00
jdolecek 4db9600c94 use hd0a instead sd0a in 'help' command example 2001-06-02 14:56:13 +00:00
manu 4788337ddb Fixed a rough buf in ptrace SETFPREGS (was using regs instead of fpregs) 2001-06-02 13:49:44 +00:00
matthias af667cdd42 The io offsets in arm32/isa/timerreg.h included the IO_TIMER1 offset. 
With dev/ic/i8253reg.h this is not the case.
Add IO_TIMER1 to all offsets used in inb and outb. This fixes port-arm32/13009.
 2001-06-02 12:51:28 +00:00
bjh21 fd7e9d6d32 Clean up hcsc_match: Don't check the manufacturer ID, since podule IDs are 
unique anyway.  Do check whether the description starts with "SCSI", since
HCCS used the same ID for their IDE podule.
 2001-06-02 12:07:34 +00:00
jdolecek 58467b0a9d Slighly improve the PTRACE_CONT comment 2001-06-02 11:46:09 +00:00
bjh21 e9ff9b9d73 Enable disconnect/reselect (now that it works) and parity checking. 2001-06-02 11:43:40 +00:00
bjh21 68035f55f1 In DEBUG kernels, catch page faults in interrupt handlers early. 2001-06-02 11:17:32 +00:00
bjh21 c81d426dcf Save R14 (in a proper stack frame) around {read,write}_multi_1, since page 
faults can corrupt it on arm26.
 2001-06-02 11:15:56 +00:00
bjh21 447793851c Add hcsc to every configuration that has SCSI podules. 2001-06-02 10:48:54 +00:00
bjh21 972ef526d2 Add hcsc, scsibus and some SCSI devices. 
Also, add some useful compiler options to FOURMEG.
 2001-06-02 10:47:55 +00:00
bjh21 2d35661e6a Use write_munti_1() to implement bus_space_write_multi_1(). 2001-06-02 10:45:43 +00:00
bjh21 ac0d39dfe8 Add write_multi_1(). 2001-06-02 10:44:56 +00:00
bjh21 3df8e425e7 Correct permissions on vmapbuf'ed pages. A read from a device is a write to 
memory, and vice versa.
 2001-06-02 10:44:02 +00:00
jdolecek 40033835d8 Comment DIAGNOSTIC, DEBUG out 
Use the 'root on ? type ?' config by default, leave the nfs one commented out,
add line for root on ed0a
 2001-06-02 10:37:27 +00:00
kim 549a254824 It is misleading that the kernel outputs "DHCP server:" followed by 
the value of "next-server" from the DHCP (or BOOTP) reply.  This is
not the DHCP server's IP address (except by chance), so instead of
"server" make it print "next-server".
 2001-06-02 01:52:10 +00:00
chs 9bde6cff5c remove bogus curly braces from a structure forward-declaration. 2001-06-02 01:19:29 +00:00
thorpej 2da55b9a39 Define some extra configuration block bits used on the i82550 (a.k.a. 
PRO 100/S), including the extended RFA format.  Don't hard-code the
RFA size to allow us to use the extended format in the future.
 2001-06-02 01:04:01 +00:00