89893e42b7
ANSI'ify.
2001-08-25 18:04:01 +00:00
11be81ff63
Regen.
2001-08-25 06:00:01 +00:00
c783391d0a
Note compatibility with the Am79c874, and document some more
...
registers.
2001-08-25 05:57:12 +00:00
9d50e2e95a
Back out previous; closer inspection of the manual reveals that the
...
Am79c874 has the same ID register contents as the AC101.
2001-08-25 05:55:19 +00:00
820809faec
Regen; added AMD Am79c874 NetPHY-1LP.
2001-08-25 05:45:25 +00:00
05e4fb8e6c
Add AMD Am79c874 NetPHY-1LP.
2001-08-25 05:44:59 +00:00
85a7cdc261
Driver for the 10BASE-T portion of the AMD 79c901 PHY.
2001-08-25 04:06:26 +00:00
158cb83996
Add a driver for generic HomePNA PHYs. Currently supports the HomePNA
...
portion of the AMD Am79c901.
2001-08-25 03:21:38 +00:00
9fe2378664
For HomePNA PHYs, don't register it w/ ifmedia as 10BASE-T, but
...
rather as HomePNA1.
2001-08-25 01:57:56 +00:00
f7f8866fea
Add a flag that indicates that a device is a HomePNA device.
2001-08-25 01:41:17 +00:00
684a4b71e3
Regen; improve AMD PHY names.
2001-08-25 01:39:59 +00:00
9d04a424fe
Improve the AMD PHY names.
2001-08-25 01:39:22 +00:00
b6aa674493
Driver for the Altima AC101 10/100 Ethernet PHY.
2001-08-24 17:54:32 +00:00
ce0d046061
Regen; recognize the 79c972's 10BASE-T interface mapped onto MII.
2001-08-23 04:47:36 +00:00
b52818d607
The Am79c972 PCnet-FAST+ has its built-in 10BASE-T interface mapped
...
onto the MII bus. Recognize it.
2001-08-23 04:47:05 +00:00
4977f2fb2d
Advertize pause capability (802.3x flow control) to peer.
2001-08-06 09:51:40 +00:00
10a5470050
Ops, forgot to commit this one:
...
- kill carrier detection code, it's not that usefull and give false indications
on loaded ethernet segments
2001-08-04 02:21:24 +00:00
7459c35d44
Clean up 1000BASE-SX autonegotiation, and add a way to advertise
...
PAUSE capability.
2001-07-27 22:44:59 +00:00
4333749c7a
Use the bit-swapped OUI for the 5221. (Have I mentioned that I really
...
don't like how the current MII_OUI() works?)
2001-07-27 17:58:20 +00:00
773c261d65
Add a 3Com 3c905B internal PHY.
2001-07-27 17:55:34 +00:00
3d3c5fa78c
Regen; added a 3Com 3c905B internal PHY made by Broadcom.
2001-07-27 17:55:07 +00:00
4063cb411b
Fixup some Broadcom entries, add an entry for Broadcom PHY that
...
is built-in to some 3Com 3c905B cards.
2001-07-27 17:54:40 +00:00
4a416b823f
Fix 1000BASE-X duplex negotiation. That'll teach me to read the
...
manual more carefully next time.
2001-07-25 22:00:43 +00:00
bb93036fa9
Regen.
2001-07-20 07:07:28 +00:00
959f6ee3f3
Adjust for the corrected Marvell entry.
2001-07-20 07:07:05 +00:00
38f94a6fbe
Bleh, I don't like the way our miidevs works now. Repair the
...
Marvell Semiconductor entry.
2001-07-20 07:06:42 +00:00
41a68e94a9
Driver for the Level One LXT-1000 10/100/1000 PHY.
2001-07-12 21:54:40 +00:00
be71426b74
Regen; Add LXT-1000, clean up.
2001-07-12 21:25:31 +00:00
6e65eb3c21
Add LevelOne LXT-1000 10/100/1000 PHY, clean up some Gig-E
...
PHY names.
2001-07-12 21:25:07 +00:00
aef9e7bea3
Code to handle generic ten-bit interfaces (1000BASE-{LX,SX} fiber
...
interfaces).
2001-07-12 18:49:38 +00:00
0e863b15a6
Driver for the Marvell 88E1000 ``Alaska'' 10/100/1000 PHY.
2001-07-12 17:30:45 +00:00
39928114d6
Regen; corrected Marvell entries.
2001-07-12 17:29:49 +00:00
511aa23898
Correct Marvell OUI, and 88E1000 model number.
2001-07-12 17:29:18 +00:00
8d829065a6
IFM_1000_TX -> IFM_1000_T, as (breifly) discussed on tech-net.
2001-06-30 17:53:58 +00:00
0b0010a7c3
When probing for a PHY, look at the EXTSTAT bit in the BMSR, as well,
...
not just the media mask. This prevents PHYs/TBIs that only support
Gigabit media from slipping through the cracks.
2001-06-20 01:42:41 +00:00
7914a89b02
Add support for the Seeq 80225 10/100 Ethernet PHY. This is just
...
a stripped-down version of the 80220/80223.
2001-06-19 20:10:54 +00:00
93169d8a94
Regen; added Seeq 80225 10/100 PHY.
2001-06-19 19:51:27 +00:00
5d3c31d576
Add Seeq 80225 10/100 PHY.
2001-06-19 19:51:04 +00:00
578730c551
Initialize sc->sc_anegticks to 5 on attach to prevent panic due to
...
assertion failure.
2001-06-08 07:09:40 +00:00
9987ee5249
Driver for the Broadcom BCM5201/BCM5202 "Mini-Theta" Ethernet
...
PHYs. This is also the same PHY core as in the 3Com 3c905C.
The PHY is documented in the 3c905C manual.
2001-06-02 21:42:10 +00:00
424f7a1e65
Make PHY matching all table-driven.
2001-06-02 21:39:38 +00:00
33a6994da1
Driver for Broadcom BCM5400-family Gig-E PHYs. Programming
...
information gleaned from FreeBSD.
2001-06-01 16:49:59 +00:00
996df042df
Add support for the DP83815 MacPHYTER internal PHY to the DP83843 PHYTER
...
driver, since for our purposes, they are compatible.
2001-05-31 20:30:21 +00:00
1042f830e5
Regen; added several more PHYs.
2001-05-31 19:41:07 +00:00
0c94166e28
Add several additional PHYs.
2001-05-31 19:40:33 +00:00
f752c7d328
On the Gig PHYTER, For whatever reason, the 10baseT-related bits of the
...
BMSR are wired to 0, yet the PHY supports 10baseT. So, to get around
this, we test the ANAR 10baseT bits after a PHY reset. These bits are
set according to input pin 180. If we see the 10baseT ANAR bits set,
we fake them in the BMSR so that we can actually autonegotiate 10baseT.
2001-05-31 18:47:22 +00:00
2128d9199a
Enable frobbing the 1000baseT control register on Gig-E PHYs,
...
used for hard-wiring master mode, and for advertising the 1000baseT
media options during autonegotiation.
2001-05-31 18:44:48 +00:00
628a67ab31
Add a driver for the NatSemi DP83891 and DP83861 Gig PHYTER
...
10/100/1000 PHYs.
2001-05-31 16:06:58 +00:00
ea1aed7db2
Make the number of ticks between auto-negotiation tries PHY-specific,
...
and default every PHY to 5 seconds (what we used before). If we find
Gig-E media on a PHY, bump it to 10 seconds, since it can take 5
seconds just to negotiate a Gig-E link.
2001-05-31 16:02:29 +00:00
ad090e7062
Regen; added NatSemi DP83891.
2001-05-31 03:32:38 +00:00
thorpej