6dc9297499
remove unneeded typecast
1998-07-24 13:41:52 +00:00
1c2f0a15fd
Don't create the extent region pool until one of our callers is of the
...
opinion that it's safe to call malloc.
1998-07-24 06:40:45 +00:00
8ba3494f9a
Deal with new pool code's changed API by rewriting this to not use pools.
...
Instead, use a manually maintained freelist in a second tailq.
Uses less data space, looks more symmetrical.
1998-07-24 03:29:29 +00:00
4eeeee6a7c
Print a complaint when no children were specified
...
in the config file. Better than a link error...
1998-07-23 23:48:33 +00:00
4a15b6ba7d
Make this like the other redirect includes.
1998-07-23 23:47:02 +00:00
7e0d396bf4
Add xyc to the dev/xy.c line, similar for xd.
1998-07-23 23:45:24 +00:00
f836b9e8d3
Drop private page table list maintenance; use memory pools instead.
1998-07-23 21:42:40 +00:00
4e465abf3f
Use a memory pool instead of malloc to allocate region descriptors.
1998-07-23 20:57:17 +00:00
a96abe7092
Update pool_* functions to new interface.
1998-07-23 20:52:01 +00:00
363f729ada
Use memory pools to allocate swap buffers. Allocations are all dynamic;
...
in particular `nswbuf' is gone, as is the private "struct buf" list that
was previously maintained in here.
1998-07-23 20:51:09 +00:00
20f05a4bb5
Include pool_drain() in page scans.
1998-07-23 20:36:09 +00:00
73ffa498ec
Define M_POOL.
1998-07-23 20:34:59 +00:00
e32923a128
Re-vamped pool manager.
...
* support for customized memory supplier
* automatic page reclaim by VM system
* time-based hysteresis
* cache coloring (after Bonwick's "slabs")
1998-07-23 20:34:00 +00:00
1253bfdf46
Utilize the centralized probe function.
1998-07-23 19:32:42 +00:00
fe7d31fe1e
First-gen
1998-07-23 19:31:36 +00:00
bdb2269a46
Create a master list of pnp logical and compatibility device codes instead
...
of hard-coding it into each driver and use a centralized probe function.
1998-07-23 19:30:44 +00:00
8d611b5f32
Remember the product ID and revision.
1998-07-23 19:25:52 +00:00
d2bc077edb
G/c a now unsed config flag.
1998-07-23 19:03:11 +00:00
1c9aed40f6
Round-out full-duplex support.
1998-07-23 19:02:55 +00:00
31177b97e7
In usercodes, we use getpagesize() instead of NBPG.
1998-07-23 18:15:57 +00:00
458ba64f3a
Slight variation on last; be a bit more zealous about fixing up the
...
clock source. Now, when my EtherPower II locks up, it eventually recovers!
(Geez, I'd like to know why it does this, and only apparently in 10mb/s mode).
1998-07-23 17:37:38 +00:00
c4c3297772
update comment ("John F. Woods" <jfw@funhouse.com>, PR kern/5798)
1998-07-23 16:39:24 +00:00
56a5adfaff
Switch keyboard to "event mode" on open.
...
Nuke wskbd_set_translation(). It doesn't fit into the "screen" model.
1998-07-23 14:33:01 +00:00
d6ef9cbb33
Add some comments and a function to set the alternate settings in an
...
interface.
1998-07-23 13:44:21 +00:00
8cdf268a45
Implement bulk transfer for OHCI.
1998-07-23 13:41:04 +00:00
217addc8de
Option DDB_ONPANIC needs a value.
1998-07-23 13:03:23 +00:00
7cdf5d9a77
retry disk accesses (for shaky floppy drives)
1998-07-23 09:59:44 +00:00
c263b1d26f
Don't leak memory if opening a pipe fails.
1998-07-23 09:18:37 +00:00
84840da908
in_pcballoc(): we can't afford to wait for memory.
1998-07-23 08:24:33 +00:00
964fdc18b8
Use the pipe maximum packet length rather than the device max length when
...
setting up a transfer.
Update the UHCI data toggle correctly.
1998-07-23 01:46:27 +00:00
0f40401a23
Fix bug in freeing TD chain after bulk transfer.
1998-07-23 00:27:36 +00:00
202d438148
CS8900 driver has of_network_dev property.
1998-07-22 22:09:59 +00:00
c10c18b955
Get media from OpenFirmware.
1998-07-22 22:09:18 +00:00
daf40e1b0b
Add common OpenFirmware network interface functions. Currently supports
...
decoding the `supported-network-types' and `chosen-network-type' properties
into ifmedia words.
1998-07-22 22:04:14 +00:00
04e498dae6
Change from "-G 0" to "-G0" for egcs.
1998-07-22 19:59:21 +00:00
0751419914
Back out previous change. It breaks Seyon in a non-obvious way.
1998-07-22 19:13:02 +00:00
4c50fd2165
regen
1998-07-22 17:43:11 +00:00
28f1e61164
add IDs for ACC Micro 2051 "PCI Single Chip Solution"
1998-07-22 17:41:04 +00:00
101f67646c
Add '<ufs/ufs/dinode.h>' to the include list. (Julian Coleman)
1998-07-22 12:49:42 +00:00
40060e366e
Loop over all configurations when trying to probe for interface drivers.
1998-07-22 12:22:08 +00:00
e6efe5f7e9
Regen
1998-07-22 11:48:58 +00:00
194f94bd97
Don't print bogus info about vendors in pcmciadevs_data.h
...
(Reported by John Kohl)
1998-07-22 11:47:13 +00:00
f190634e3d
Add an Acer labs USB controller.
1998-07-22 10:43:37 +00:00
05ff8b05f5
Print the default media at attach time.
1998-07-21 23:09:25 +00:00
02ad0b4eda
Add support for ifmedia.
1998-07-21 22:58:31 +00:00
d3882c1b56
Define autonegotiation bits.
1998-07-21 22:27:33 +00:00
3db796d287
Define a couple more of the PacketPage registers.
1998-07-21 22:04:13 +00:00
aaa383804d
Correct the name of the CS8920M id.
1998-07-21 19:54:56 +00:00
88a0132aec
Correct the name of the CS8920M id, and fix some whitespace lossage.
1998-07-21 19:54:19 +00:00
cc035ff82e
Oops, I forgot to commit this with bus_dma stuff.
1998-07-21 18:01:30 +00:00
0f572b1caa
Preserve OpenFirmware's msr and use it in openfirmware().
1998-07-21 17:53:50 +00:00
49bb9d8214
adapt to LANCE driver split
1998-07-21 17:36:01 +00:00
68f2474820
adapt to LANCE driver split; let PCNET/PCI use the 32-bit mode
1998-07-21 17:30:26 +00:00
9a59784f70
Split the LANCE driver into a part specific to the classic chip with
...
24-bit DMA addresses, and an independant part.
Implement support for the 32-bit mode in the newer (79c9xx) chips.
1998-07-21 17:26:45 +00:00
f520c72417
complete the options in opt_nfs_boot.h
1998-07-21 17:00:07 +00:00
cca4e566a9
Implement a better fix for the `gratuitous FIN' problem, as
...
mentioned on tcp-impl but with a bit more commentary.
1998-07-21 10:46:00 +00:00
dc08679458
Fix ioctl definitions for WSKBDIO_{SET,GET}LEDS.
...
from Takuya Koumoto <takuya-k@is.aist-nara.ac.jp>
1998-07-21 09:17:33 +00:00
3780fa036e
Add RCS IDs.
1998-07-21 07:48:36 +00:00
fc42c3b81d
Continued work on the esp scsi driver. Not yet working, but progress continues.
1998-07-21 06:17:35 +00:00
52cfd19bcf
Ever closer to KNF.
1998-07-21 01:17:14 +00:00
bb3c5257c7
Move the cs8900 driver's softc, etc. definitions to an MI location.
1998-07-21 01:04:55 +00:00
133efc841f
Use <dev/isa/cs89x0var.h>
1998-07-21 01:04:09 +00:00
0611893e60
Move the cs8900 driver's softc, etc. definitions to an MI location.
1998-07-21 01:04:01 +00:00
9c9a866a90
Move PacketPage read/write macros in to if_csvar.h
1998-07-21 00:58:46 +00:00
bdc9dcbe8a
G/c two more unused definitions.
1998-07-21 00:53:57 +00:00
23efef79fc
Move the code that prints Rx errors into a separate function, rather than
...
duplicating it.
1998-07-21 00:52:15 +00:00
9282418a78
Some cosmetic changes.
1998-07-21 00:40:17 +00:00
0987caaee6
G/c unused definition.
1998-07-21 00:39:21 +00:00
20fb09c609
G/c more unused debugging goo.
1998-07-21 00:24:45 +00:00
6014ea2216
Garbage-collect some unused debugging goo.
1998-07-21 00:23:18 +00:00
f45804c4c6
Nuke sc_iobase (and a serious misuse of it!)
1998-07-21 00:22:29 +00:00
22ff8accae
Use fixed-size types.
1998-07-21 00:20:35 +00:00
5b56c35223
Nuke the "pia" typedef.
1998-07-21 00:18:35 +00:00
44d02a07d0
Update for <dev/isa/cs89x0reg.h>
1998-07-21 00:11:03 +00:00
57488ef1e4
Remove the register descriptions from this file, and split them into
...
<dev/isa/cs89x0reg.h>
1998-07-21 00:10:11 +00:00
c3e7a09c4e
Use <dev/isa/cs89x0reg.h>
1998-07-21 00:08:57 +00:00
a083bc2950
Split the CS8900 register description from the SHARK-specific header file,
...
and place it here.
1998-07-21 00:07:33 +00:00
9e17315847
Write the CLOCK TEST bit *at least 16 consecutive times* during initialization,
...
as the clock source will be set incorrectly otherwise! From SMC Application
Note 7-15. Thanks to Christoph Badura for the pointer!
1998-07-20 21:39:05 +00:00
9df67db949
We're not Linux. If we still want driver version strings to be displayed
...
at boot, then I suppose DEBUG is a reasonable compromise.
1998-07-20 21:18:38 +00:00
d8e4026492
Oops, unused variable warning.
1998-07-20 21:17:30 +00:00
74fc0579eb
We're not Linux. If we still want driver version strings to be displayed
...
at boot, then I suppose DEBUG is a reasonable compromise.
1998-07-20 21:16:52 +00:00
79f77cc9ce
The mystery bit in the TEST register is actually the CLOCK TEST bit.
1998-07-20 20:45:06 +00:00
e99bc6379d
Don't deref a NULL tty pointer in the interrupt routine. This can happen
...
if we're the serial console, we have not yet been open'd, and we get an
interrupt for one reason or another.
1998-07-20 17:35:17 +00:00
2db169eb1f
Avoid possibly overflowing an mbuf. From Dan S. Decasper, via Chuck Cranor.
1998-07-20 16:41:05 +00:00
e641acf153
In configure(), initialize the HIL driver's software state before enabling
...
interrupts; if there's an interrupt pending (i.e. because the user pressed
a key or moved his mice while the kernel was being loaded), the interrupt
handler may safely be run. Fixes PR port-hp300/5397.
1998-07-20 10:47:50 +00:00
f5f944adfd
Regen
1998-07-20 07:34:11 +00:00
87dc83ee69
Remove duplicate DEC card
1998-07-20 07:33:54 +00:00
7a03c42491
Fix typo.
1998-07-20 02:17:17 +00:00
84676442e2
Commented out some bus_dma code, until I can fix.
...
(bus_dma.c needs sync with alpha port!)
Continued progress on scsi driver.
A couple of other compiler warning level of tweaks.
1998-07-19 21:41:16 +00:00
b4b261bbb0
Remove redundant opt_ddb.h
1998-07-19 20:45:26 +00:00
fb28f87855
Remove a check which restricted raw SCSI commands to the "minor 3"
...
("CTLMODE") subdevice. There are legitimate uses for raw commands with
normal tape handles too.
[I'm not sure if this is a final solution. Administrators might want
to set up a more finegrained policy. However, this should not be mixed
with the "set defaults" semantics of the "CTLMODE" subdevice; another
flag should be used instead (eg execute permission or a minor number bit).]
1998-07-19 18:43:20 +00:00
d408ddc6c7
Make the combination "profiled kernel" and "${KERN_AS} == "library""
...
work too. (mcount.po was forgotten)
1998-07-19 18:35:16 +00:00
66370d4fe9
Regen
1998-07-19 17:30:02 +00:00
e3bc291504
Add a devlist2h.awk so that we don't sprinkle the same constants over
...
each device driver file and use it.
1998-07-19 17:28:15 +00:00
334afaa14e
Regen from pcidevs.
1998-07-19 12:25:46 +00:00
463e7e6dce
Fix product ID for Matrox Mystique, add NEC PowerVR PCX2.
1998-07-19 12:23:56 +00:00
53e3ba1192
Make DDB work again.
1998-07-18 23:02:33 +00:00
6054d626f9
Switching dev/ic/lpt.c to use spllpt() instead of spltty(). It doesn't use
...
tty structures, and on some machines (namely the DraCo internal lpt, and some
multi-i/o boards for Amigas and DraCos), tying spltty to the pretty high printer
interupt level would hurt serial performance.
On all affected ports but Amiga, spllpt() has been defined in machine/intr.h
to be spltty(), thus preserving old behaviour. Portmasters are encouraged to
change is, if they feel something else is better (e.g., one of its own were
possible).
1998-07-18 21:27:25 +00:00
a455ce7531
Locking is now in the outer framework for isp_init/isp_reset- this allows
...
us to call isp_reset/isp_init internally with impunity.
Rename isp_phoenix to isp_restart and make it global. Clean it up a tad.
If we get an ASYNC_SYSTEM_ERROR code in isp_intr, call isp_restart and
return- the f/w is toasted at this point (usually), so we have to bring
things back to a known state.
In isp_mboxcmd, when we don't see the HOST_INT bit go clear, try and
find out if the isp is trying to tell us something and try again. This
may avoid a potential deadlock where the previous mailbox command hasn't
been cleared by the ISP.
In isp_init don't try and get device parameters if we already have them-
this typically doesn't work if we're in the middle of an isp_restart.
1998-07-18 21:10:16 +00:00
9afa921bc1
roll core version number and add a global visible isp_restart function
1998-07-18 21:06:20 +00:00
35c8fecf3a
fix headers
1998-07-18 21:05:39 +00:00
b85bf24ed5
fix bogus comments
1998-07-18 21:05:04 +00:00
576988940f
roll revision
1998-07-18 21:04:46 +00:00
1aa702b8f8
fix bogus initialization
1998-07-18 21:04:22 +00:00
99ff11f6b7
locking now out of main framework for isp_reset/isp_init
1998-07-18 21:02:06 +00:00
50d1442817
Fix PMAP_NEW and make it the default.
1998-07-18 20:35:14 +00:00
52ac5e203e
Precompute lots of bitmasks etc. in serparam(). Results in slightly better
...
(but I suspect, insignificant) performance, and also prepares for 8bit +
parity support.
1998-07-18 20:19:33 +00:00
2948f65db4
Use unsigned comparison of tbreg in delay().
1998-07-18 16:23:44 +00:00
786b86d71b
use AF_LOCAL instead of AF_UNIX
1998-07-18 05:04:35 +00:00
3a9ed00799
Document that we are more conservative after doing MTU discovery than the
...
suggestion in draft-floyd-incr-init-win-03. Rather than scaling cwnd back
by the ratio of new segment size to old segment size, we perform a slow start
using the Initial Window, computed with the new segment size.
1998-07-17 23:09:58 +00:00
116c3be1e5
In dvma_mapout(), make sure to not overrun the buffer when flushing the cache.
1998-07-17 23:05:35 +00:00
0f909866c0
Clarify that we're using the Loss Window when we receive a source quench.
1998-07-17 23:02:38 +00:00
fa20f24cd9
Add a comment wrt. a current issue w/ CWM.
1998-07-17 23:00:02 +00:00
a3f4316cba
Clarify that we are using the Loss Window if a retransmission occurred
...
during the three-way handshake.
1998-07-17 22:58:56 +00:00
830879a809
Comment where the Restart Window is computed, and in the non-CWM case,
...
make sure it never _increases_ cwnd.
1998-07-17 22:52:01 +00:00
1c4ff0a086
Comment where we use the Loss Window.
1998-07-17 22:18:49 +00:00
2fc1260cc0
Implement bus_dmamap_load_uio().
1998-07-17 21:09:59 +00:00
f6e8a93bac
Replace hardcoded constant with VM_MIN_KERNEL_ADDRESS.
1998-07-17 19:12:48 +00:00
142429fb34
bus_dma carries TNF copyright.
1998-07-17 19:02:46 +00:00
c11b71818d
Fix typo.
1998-07-17 18:53:19 +00:00
08574665d0
Write (fake) Apple Partition Map when install boot block.
1998-07-17 18:48:37 +00:00
0a6758d760
"chaos" PCI controller support.
...
Clean up.
1998-07-17 18:40:31 +00:00
5f7fef3c79
Add bus_dma support.
1998-07-17 18:38:10 +00:00
fb93315ffc
Change pcitag_t format for bandit.
1998-07-17 18:31:56 +00:00
97081b51be
Make this work for a change.
1998-07-17 02:33:13 +00:00
69b1b4758d
Fix PR5559: if fast-forwarding, DF set, and packet too large, send ICMP error..
1998-07-17 00:35:23 +00:00
534520d815
Fix PR5508: ipfil cut-through forwarding causes panic
1998-07-17 00:28:00 +00:00
985b3e8d4d
Make this compile without USBVERBOSE.
1998-07-16 12:55:19 +00:00
deac3540de
Put original hash function back. It wastes a little bit of space, but is much more even -- think of the case of a web service provider, some of whose customers end up getting 'inferior service' because they're on addresses that happen to be out at the end of a hash chain. With webservers with thousands of addresses, this is a real issue. If the wasted space is a big deal, we could pick a prime number that's slightly _less_ than a power of two...
1998-07-16 06:45:09 +00:00
4c50a37133
Back out previous, I botched something.
1998-07-16 00:46:50 +00:00
d2ddbe58a2
Add empty opt_cputype.h to satisfy changes committed during
...
defopt'ing of network options.
1998-07-15 23:57:04 +00:00
4e51ba7874
New file for building isp host adapter.
1998-07-15 20:22:19 +00:00
66ea6cc018
Fix for kern/3835: add an sd sense handler. If we get a check condition/sense
...
data ASC/ASCQ of 0x04/0x01 (logical unit not ready, initialization in progress),
hang out for 5 seconds and return a RETRY THE OPERATION command. If we
get a check condition/sense data ASC/ASCQ of 0x04/0x02 (logical unit not
ready, initialization command required), send a polled/nosleep START UNIT
command and return a RETRY THE OPERATION command if that succeeds.
Don't send a START UNIT to a disk quirked as SDEV_NO_START. Don't send
a START UNIT to removable media. The reason for the latter is to not
just blindly spin up new (maybe changed) media.
I should note that I've successfully made this work with the ISP host
adapter so far. Other host adapters will need some work to be able
to manage or reasonably fail NOSLEEP/POLL commands while in this
state. Alternatively, the internal SCSI midlayer structure has got
to allow for more controlled error recovery (e.g., restart queues
controlled by the target driver).
1998-07-15 20:21:12 +00:00
bf29f419e7
part of fix for kern/3835: use of enumerated returns from target sense handlers
1998-07-15 20:13:30 +00:00
dba811205f
1) Part of fix for kern/3835: add in enumerated return values for target
...
drivers' sense handlers to return. Coincidentally one of them ends up
being ERESTARTSYS.
2) Add a SCSI_URGENT flag to xs structure- this allows host adapters that
do command tagging to do the right thing wrt a tag.
1998-07-15 20:11:34 +00:00
bc355c6b3f
new framework
1998-07-15 19:59:45 +00:00
afb0e1b693
no framework
1998-07-15 19:53:57 +00:00
e8f976016e
Some major thrashing to handle building for other than NetBSD.
...
There is one change of note- build a list of completing commands in
ispintr and then say you're done- this avoids some re-entrancy issues
that had surfaced.
1998-07-15 19:50:16 +00:00
d96bd50c07
NetBSD OS specific routines and definitions.
1998-07-15 19:44:04 +00:00
d681d158c7
Remove the raw HYPERchannel kludge.
1998-07-15 17:45:52 +00:00
389da54091
Garbage collect `imp' and `hy'. We don't have the rest of the code, and
...
it's not like anyone is ever going to be using either of them.
1998-07-15 17:39:20 +00:00
9d504aa676
rename "LK" -> "declk" for consistency
1998-07-15 14:06:34 +00:00
3036bcf8e5
Close a descriptor leak. This proved especially detrimental under heavy
...
paging.
1998-07-15 12:38:29 +00:00
8babb8290c
fix egcs warnings
1998-07-15 09:35:35 +00:00
41986b6ad6
Print out the revision as a letter, i.e. 'A', ...
1998-07-15 03:29:47 +00:00
25a86ef490
Be a little more thorough when printing the chip name, and also print
...
the chip revision.
1998-07-15 00:01:17 +00:00
45c63f6b7b
Massive cleanup of this driver (format police, autoconfig). More to come.
1998-07-14 23:38:49 +00:00
86574cd4f8
patch to add "vi/ve" per PR#4583
1998-07-14 20:29:11 +00:00
37040ed809
support keyboards with PC interface and DEC layout (LK461)
1998-07-14 19:33:58 +00:00
bfd46dadad
fix codes delivered by "Help" and "Do" keys
1998-07-14 19:32:17 +00:00
1143e585fc
PS -> SR: PS as alias to SR was removed due to conflict with other usage.
1998-07-14 03:19:17 +00:00
32a0c413a5
Oops - check and calculate maxproc with right symbols - maxproc was getting
...
incorrectly reduced for UVM.
1998-07-14 03:17:05 +00:00
750e240c97
Print the "model" property.
1998-07-14 01:39:34 +00:00
dc16918e07
Add support for G3 Mac.
1998-07-13 19:37:28 +00:00
14fd96b811
Get framebuffer address from Openfirmware.
1998-07-13 19:31:53 +00:00
ed1ec91943
Change VM_MAXUSER_ADDRESS to 0x7ffff000.
1998-07-13 19:28:56 +00:00
a0fead97de
Add support for Motorola MPC106.
1998-07-13 19:27:13 +00:00
37c5807bba
Clean up a bit.
1998-07-13 19:22:26 +00:00
209036f339
Revert to previous version.
...
Use ROM font.
1998-07-13 19:14:43 +00:00
d58ad29b6c
Kill the old extern mchkinfo pointer and prototype cpu_mchkinfo().
...
This file has been collecting prototypes and other things used in the MD
code...that's bad...because this is exported to the MI kernel.
1998-07-13 19:10:14 +00:00
48257ecec1
Define cpu_mchkinfo() to locate the mchkinfo struct. This is used to fix
...
the recent bug where Multias around the world have been aborting back to
SRM with no message at all as they tried to attach a TGA or VGA console,
because the old mchkinfo pointer wasn't allocated prior to use.
And contrary to widespread rumour, this bug has nothing to do with my
LCA IDE mod...that worked just fine. "Not guilty."
1998-07-13 19:07:33 +00:00
0d7c1dede9
Use the new cpu_mchkinfo().
1998-07-13 18:49:34 +00:00
96a07e3f99
Use "boot-device" if "bootpath" is not set.
1998-07-13 17:38:37 +00:00
dd998f4113
* Use "boot-device" if "bootpath" is not set.
...
* Reduce code size.
1998-07-13 17:35:55 +00:00
943235ed66
Those tabs sure are excitable!!
1998-07-13 16:50:56 +00:00
ae9d36ba00
oof, fix a couple of over-zealous tabs.
1998-07-13 16:48:11 +00:00
76735d1493
Add support for ATA CD changer devices like the NEC CDR-251.
...
Evidence of managerial coding removed by Victor T. Cleaner (thorpej)
1998-07-13 12:04:29 +00:00
8c782053ab
Add support for ATA CD changer devices like the NEC CDR-251.
1998-07-13 12:01:50 +00:00
20106c31ca
Add some useful HID ioctl()s.
1998-07-13 10:49:41 +00:00
dd34e06fe7
Add three more cards:
...
- USRobotics WorldPort 14.4 modem
- Mototola Personal Messenger 100c CDPD modem
- Socket Communications PageCard
Note: Most of this should be replaced with a com-port-detecting
heuristic better than the previous two.
1998-07-13 07:37:05 +00:00
57c3ea15d8
Guard opt_cputypes.h include with _KERNEL && !LKM
1998-07-13 06:12:08 +00:00
1c34e07b3f
worked on adding nextdma support for scsi driver.
1998-07-13 04:01:39 +00:00
0756290d3f
Recognise the ALI M1543 in order to support ALI Aladdin V chipset
...
motherboards.
1998-07-13 03:31:57 +00:00
7778b00444
Recognise the ALI M1541 in order to support motherboards with the
...
ALI Aladdin V chipset.
1998-07-13 03:30:52 +00:00
b34e933db8
Regen.
1998-07-13 03:29:48 +00:00
22d5b20046
Add ID for ALI M1541 Host-PCI bridge.
1998-07-13 03:29:00 +00:00
c9e3235f35
1. Don't deref zero on early machine checks.
...
2. Revert last week's non-KNF {} editing.
1998-07-13 00:14:52 +00:00
7732413b58
Regen.
1998-07-12 20:44:53 +00:00
022ab523d2
Add USB.
1998-07-12 20:07:27 +00:00
deb00272b9
Add USB support. Supported so far:
...
* UHCI and OHCI host controllers on PCI
* Hubs
* HID devices withe special drivers for mouse and keyboard
* Printers
1998-07-12 19:51:55 +00:00
fd0635e5c2
Remove a trailing ',' in an enum declaration.
1998-07-12 18:27:06 +00:00
29b6a40f77
Add include to SUBDIR to install the machine includes.
1998-07-12 18:06:54 +00:00
72955c78da
New Makefile to install the includes, like all the other ports do.
1998-07-12 18:06:15 +00:00
1b46ebe1d9
Add elf_machdep.h to the INCS list.
1998-07-12 17:53:29 +00:00
5450855604
GCC erroneously thinks used_vnode_size (a quad) is uninitialized on m68k.
1998-07-12 17:14:08 +00:00
5f59f7e15a
Add i386 relocations.
1998-07-12 17:09:43 +00:00
97ab1bd53b
Resolve conflicts from the import.
1998-07-12 15:23:59 +00:00
e3d44c6e25
Resolve conflicts from the import.
1998-07-12 15:11:50 +00:00
e2ff73afa7
Compute SFB pixel dimensions at attach time for PMAGB-BB users.
...
(qvss-compat needs revision, but should be replaced with wscons anyway.)
1998-07-12 06:26:37 +00:00
8f94f1a709
I went to Fry's and noticed a few more cards that probably will be
...
supportable with this driver, but currently aren't supported. Add them.
1998-07-12 02:21:56 +00:00
2aaf359b9f
Add m68k relocation types.
1998-07-12 01:39:06 +00:00
639cc899cf
Basic elf_machdep.h for m68k; doesn't include relocations, yet.
1998-07-12 01:17:58 +00:00
1e54ab4262
Reserved 8k at top of memory for ROM. This fixes warp9c boot problems.
...
changed ethernet panic to a warning when out of DMA buffers. This allows
resuming if you sit in ddb too long.
1998-07-11 07:06:16 +00:00
0978d23cc4
Clarify that Sense Key 1 is a "RECOVERED ERROR"- not just an error.
1998-07-11 00:52:09 +00:00
dd03358e27
tyop and speeling.
1998-07-10 23:28:31 +00:00
b20c7bf68c
For SOCK_STREAM, provide the socket credentials to the accepter as soon as
...
the client connects.
1998-07-10 22:15:47 +00:00
67eb4c3488
Regen from pcidevs.
1998-07-10 20:41:36 +00:00
763b848669
Add Intel's BX chipset, 3Dfx Interactive and their Voodoo board.
1998-07-10 20:40:06 +00:00
7b04d96d02
Add UVM support to amiga.
...
Use a second free memory list for 16-bit Zorro II memory other than the
first memory segment.
1998-07-10 20:26:35 +00:00
dc9188e3e1
Add UVM support to amiga
1998-07-10 20:23:24 +00:00
6e2d9eae80
Support two free memory lists; second list will be 16-bit Zorro II memory.
1998-07-10 20:16:21 +00:00
7fee5ec13e
Fix a typo in a panic message.
1998-07-10 20:14:59 +00:00
b5b5f16fba
hmm, char sign extension bit me
1998-07-10 19:37:18 +00:00
e552760fbe
Glue in fast forwarding.
1998-07-09 22:30:01 +00:00
9ca2a54c6d
Set soundblaster irq to 5 by default.
1998-07-09 20:59:38 +00:00
902855d60e
Fix int32_t overflow with large serially concatenated components,
...
from Noriyuki SODA <soda@sra.co.jp>, PR #5729 .
1998-07-09 20:56:12 +00:00
d1da31d671
redo the PCI configuration mode detection - should make some less
...
standard compliant PCI chipsets work (Compaq, Connectix emulated Triton)
fix the bug reported in PR port-i386/5727 (soda@sra.co.jp )
1998-07-09 20:19:52 +00:00
f37f08c48e
This doesn't need opt_compat_netbsd.h any more.
1998-07-09 09:27:33 +00:00
7b68890c7f
Fix a problem with the reworked reboot code on the IIci: don't try to
...
reference variables after the MMU is disabled.
1998-07-09 06:02:50 +00:00
3a64270ca6
Back out the change from TCP/IP vol 2, in revision 1.7, which removed TH_FIN
...
from the output flags for CLOSING state. There is no harm in retransmitting
the FIN, and this change has unexpected side effects that break simultaneous
close behaviour.
1998-07-09 05:49:56 +00:00
401accfd7a
Don't #ifdef the encoding compatibility crud. It's needed for source
...
compatibility with other systems and much third party software.
1998-07-09 02:45:45 +00:00
7b6cd6a0a6
Guard opt_cputypes.h include with _KERNEL && !LKM.
1998-07-09 02:43:25 +00:00
3158aca613
Fix the name of the ulinear_be mode.
1998-07-09 02:26:55 +00:00
93ecc95d92
Fix printing of real mem. I'm going to, for right now, leave it to
...
someone else to figure out the best machine independent fashion of
fixing ptoa to handle > 32 bits.
1998-07-09 00:46:17 +00:00
6fd55f2089
Move the definition of NZERO from <sys/param.h> to <sys/syslimits.h>, since
...
XPG3 and later require it to be made visible by inclusion of <limits.h>,
which, in turn, includes <sys/syslimits.h>. The <sys/param.h> API is not
affected by this change, since <sys/syslimits.h> is included from there, too.
1998-07-08 19:31:33 +00:00
f640e832b1
Make sure to release buffers only once.
1998-07-08 18:41:24 +00:00
3858a1179a
Only run pppasyncstart (sc->sc_start) from the netisr handler.
...
This allows pppoutput to be called from splimp (e.g., when ipflow is
in use.) without requiring pppasyncstart to run at splimp.
This is believed to fix PR5624.
1998-07-08 18:05:48 +00:00
acea5c2e79
add dependency to get the version number right
1998-07-08 17:47:42 +00:00
13b329cdd2
bump version number to reflect the partition ID change
...
(should have been done long ago)
1998-07-08 17:46:21 +00:00
bca69afed6
Place the software PG_EXEC PTE bit into the protection array, instead
...
of OR'ing it in manually.
1998-07-08 17:30:45 +00:00
6b092524ea
stale beer- place structure in right file
1998-07-08 17:20:42 +00:00
a8d2213784
Define a macro that returns the mask of PALcode PTE bits that we care
...
about when determining if a TBI is necessary (i.e. the PALcode bits minus
the FOx bits, since we always track those).
1998-07-08 17:19:46 +00:00
0792d7f3db
Define a shorthand macro that represents the mask of PTE bits that the
...
PALcode cares about.
1998-07-08 16:48:49 +00:00
3f776dfbe2
Cosmetic change.
1998-07-08 16:46:51 +00:00
434b3fe82b
tentative better fix for allocating the correct number of mchkinfo structs
1998-07-08 16:28:25 +00:00
e32f380030
Garbage-collect some of the old ISA DMA code.
1998-07-08 07:56:47 +00:00
8bbd7378c5
RCS ID police.
1998-07-08 07:56:13 +00:00
48abe1f910
From pmap.new.c (UVM case only):
...
Put the first 16M of RAM onto the "first16" free list, and everthing
else onto the default free list.
1998-07-08 05:41:59 +00:00
9bbe01f100
Note that UVM is mandatory on the Shark (otherwise ISA DMA won't work)
1998-07-08 05:27:17 +00:00
ff376fbd03
Doh! Jason caught me being really stupid. There isn't necessarily
...
a linear 0..N mapping out of alpha_cpu_whami - which is what I was
using to index the new cpu machine check array. This is a quick hack
back to just using the first element while I think of a kinder function
that will do the function (per-platform) of whami->VIRTUAL CPU ID, which
if you think about it, is really necessary anyway.
1998-07-08 05:25:40 +00:00
1b5fbe0b89
DRQ 4 is used to chain the two 8237s together. Make sure it's always
...
cascaded and that it will be unmasked when DMA is thawed after being
frozen. (This also has the effect of making sure that no device ever
erroneously gets DRQ 4.)
1998-07-08 05:23:23 +00:00
30291f0f2f
Declare the ofisa soundblaster attachment.
1998-07-08 05:14:10 +00:00
e332a993e2
Initialize the machdep ISA DMA structures once we've done OpenFirmware
...
ISA DMA initialization.
1998-07-08 05:01:56 +00:00
8d10a53ddb
Use MI ISA DMA code (XXX this needs some work).
1998-07-08 05:01:17 +00:00
fcd0183e81
Remove all of the home-grown ISA DMA code, and translate the OpenFirmware
...
"dma-ranges" property into the pmap's ISA DMA ranges.
1998-07-08 05:00:40 +00:00
28cbb7c537
Provide the ISA chipset tag. XXX This should go away in favor of a real
...
ofisa attachment of the "cs" driver.
1998-07-08 04:59:46 +00:00
f5535d79ca
Provide the ISA chipset tag.
1998-07-08 04:59:02 +00:00
8eeb7eaad0
Implement an ISA bus_dma back-end for NetBSD/arm32. Tested only on the
...
Shark, but should work for other ISA-"enabled" arm32 systems, as well.
1998-07-08 04:58:03 +00:00
696858d5f9
Nuke these; we use the MI ISA DMA code now.
1998-07-08 04:57:13 +00:00
98b07e4b07
Provide an ISA chipset tag via isa_attach_hook(). G/c home-grown
...
ISA DMA code, in favor of the MI code.
1998-07-08 04:56:13 +00:00
b51b6b7c04
Lift-and-tweak from the i386 port (near-complete rewrite), providing
...
the ISA DMA stuff expected by machine-independent code.
1998-07-08 04:54:47 +00:00
eeb19dd33c
Remember our ISA chipset tag.
1998-07-08 04:53:33 +00:00
f7e400a7ab
Use the machine-independent ISA DMA code.
...
XXX We use COHERENT for now; need to deal with sync'ing DMA maps being
XXX used by the isadma driver.
1998-07-08 04:53:03 +00:00
a177e7aedc
Rearrange this a little so we can use MI ISA DMA code. XXX Should just
...
pull in files.isa, but Not Right Now, apparently.
Add the sound blaster driver here (XXX see above), and build the
arm32 bus_dma back-end.
1998-07-08 04:51:12 +00:00
8e03657b43
Define two free lists: default, and one to protect ISA DMA-safe memory.
1998-07-08 04:49:21 +00:00
d7d001fe70
Allow platform-specific code to define DMA-safe memory ranges for ISA.
...
If pages being loaded into the VM system intersect with any of these
ranges, the intersecting pages will be placed on a lower-priority
free list to protect them.
1998-07-08 04:48:20 +00:00
d47ea67c1f
Define one page free list, and put all pages on it.
1998-07-08 04:43:18 +00:00
6fa49323d7
Put VMEbus RAM on a lower priority free list, since it's much slower (because
...
the MVME-147 doesn't cache access to any VMEbus space).
1998-07-08 04:40:28 +00:00
6fb9a8addf
Define one page free list, and put all pages on it.
1998-07-08 04:39:34 +00:00
1bd007d54b
Define 2 free lists: a default, and a "first16", which is where the first
...
16M of RAM goes (in an effort to protect ISA DMA-safe memory).
1998-07-08 04:38:33 +00:00
26287d01ec
Put the first 16M of RAM onto the "first16" free list, and everthing
...
else onto the default free list.
1998-07-08 04:37:43 +00:00
a5dd574b12
Attempt to pull buffer cache pages out of the "first16" free list, in
...
an effort to avoid bouncing file system buffers (it's not clear how much
of a win this is, and it'll be pointless w/ a unified buffer cache, but
what the heck).
1998-07-08 04:36:39 +00:00
1ea93eea1c
Define one page free list, and put all pages on it.
1998-07-08 04:35:23 +00:00
7fd701e0fa
Add support for multiple memory free lists. There is at least one
...
default free list, and 0 - N additional free list, in order of descending
priority.
A new page allocation function, uvm_pagealloc_strat(), has been added,
providing three page allocation strategies:
- normal: high -> low priority free list walk, taking the
page off the first free list that has one.
- only: attempt to allocate a page only from the specified free
list, failing if that free list has none available.
- fallback: if `only' fails, fall back on `normal'.
uvm_pagealloc(...) is provided for normal use (and is a synonym for
uvm_pagealloc_strat(..., UVM_PGA_STRAT_NORMAL, 0); the free list argument
is ignored for the `normal' case).
uvm_page_physload() now specified which free list the pages will be
loaded onto. This means that some platforms which have multiple physical
memory segments may define additional vm_physsegs if they wish to break
individual physical segments into differing priorities.
Machine-dependent code must define _at least_ the following constants
in <machine/vmparam.h>:
VM_NFREELIST: the number of free lists the system will have
VM_FREELIST_DEFAULT: the default freelist (should always be 0,
but is defined in machdep code so that it's with all of the
other free list-related constants).
Additional free list names may be defined by machine-dependent code, but
they will only be used by machine-dependent code (e.g. for loading the
vm_physsegs).
1998-07-08 04:28:27 +00:00
efd84d4a97
Add a "free_list" to UVM's vm_physseg, indicating which free list the
...
pages in that physseg are on when they're free.
1998-07-08 04:19:59 +00:00
6e47b1c654
mac68k/obio/if_mc_obio.c needs hide/integrate defines, too. Moved back to
...
if_mcvar.h.
1998-07-08 04:18:53 +00:00
d5b30c1cb1
Revert last change.
1998-07-08 04:16:05 +00:00
638f0aab7c
Clarify comment about what nodes are being 'found' and noted for later
...
use by an error handler:
* There can be only one TurboLaser, and we'll overload it
* with a bitmap of found turbo laser nodes. Note that
* these are just the actual hard TL node IDS that we
* discover here, not the virtual IDs that get assigned
* to CPUs. During TLSB specific error handling we
* only need to know which actual TLSB slots have boards
* in them (irrespective of how many CPUs they have).
1998-07-08 01:03:41 +00:00
a5e7f763c2
minor tweak, and example of how to do error insertion
1998-07-08 00:58:09 +00:00
73c269fe20
attempt to catch some stuff for ev5 module info
1998-07-08 00:56:39 +00:00
9f1070514c
First (prelim placeholder) pass at machine check handler for tlsb
1998-07-08 00:49:06 +00:00
adf058f0f7
There can only be one TurboLaser node, and now we'll overload
...
into the integer tlsb_found a bit map of found nodes and export
it to the rest of the kernel. This is so that at machine check
time when we're doing some TLSB/KFTXX error handling we don't
have to attempt a badaddr to look at all TLSB nodes (which will
just be too sad to try...).
1998-07-08 00:47:53 +00:00
de4f340241
add some error handling specific definitions
1998-07-08 00:45:52 +00:00
84076832df
add some more offset definitions
1998-07-08 00:45:08 +00:00
6f87cdce00
Start of the platform specific (RAWHIDE) machine check handler. This
...
is not really needed for this platform, except that we might want to
handle PCI errors which get reported through here. In any case, this
prints out more info than is usual. Will probably need to detune
this to be based upon DIAGNOSTIC defines.
1998-07-08 00:44:32 +00:00
57190a7be7
use new mchkinfo structures for expect/recv storage
1998-07-08 00:42:14 +00:00
9035e8b3eb
Move the search for number of cpus up earlier because we need to know
...
how many cpus there are when we (now) valloc per-cpu machine check
structures.
1998-07-08 00:41:32 +00:00
275fb86f8d
add some error handling definitions
1998-07-08 00:40:18 +00:00
35ffe8edb3
Add machine check type definitions. Structure the expected/received
...
machine check items.
1998-07-08 00:39:02 +00:00
dfe345a444
common logout structure definitions, or a start thereof
1998-07-08 00:36:18 +00:00
9c326571d3
add a common logout printing routine file
1998-07-08 00:34:49 +00:00
163f4f10b1
add common logout printing routine file
1998-07-08 00:34:27 +00:00
93179db2b7
Remove several pointless cache/tlb cleans. (From Neil Carson).
1998-07-08 00:18:16 +00:00
e1fe0d71c0
Fix IOMD ID checks.
1998-07-08 00:15:59 +00:00
9a4a105abb
Remove un-necessary write buffer drains. (From Neil Carson).
1998-07-08 00:13:41 +00:00
f79b12670f
Simplify cache cleaning in page_move(). (From Neil Carson).
1998-07-08 00:12:33 +00:00
9dccefd1c9
Simplify the included files.
1998-07-08 00:10:44 +00:00
ddae1799a5
Make sure the write buffer is drained during syncing.
1998-07-08 00:08:39 +00:00
8d986de632
Add support for mmap'ing disk block devices.
1998-07-07 23:22:13 +00:00
de83dce0de
On second thought, call that like the rest of the shared intr functions.
1998-07-07 22:24:38 +00:00
c7f8d02b23
Always count the number of strays we encounter, but don't send a "stopped
...
logging" message if we're ignoring strays.
1998-07-07 22:06:29 +00:00
1ddd528346
Fix typi.
1998-07-07 22:02:57 +00:00
e82fc7d3cd
The Pyxis core logic in the 164SX and 164LX seems to have problems with
...
stray interrupts. Do what Digital UNIX (formerly DEC OSF/1) does; just
ignore strays.
1998-07-07 21:49:47 +00:00
ca73507d0b
The Pyxis core logic in the Miata seems to have problems with stray interrupts.
...
Do what Digital UNIX (formerly DEC OSF/1) does; just ignore strays.
1998-07-07 21:47:49 +00:00
be83de18fd
Use ALPHA_SHARED_INTR_DISABLE() to test if a shared interrupt should
...
be disabled after a stray.
1998-07-07 21:44:57 +00:00
443d238f70
Define a macro to test if a shared interrupt should be disabled after
...
a stray has occurred.
1998-07-07 21:37:11 +00:00
4220ffab81
Loop until all netisrs are consumed; netisrs processed down the list might
...
cause additional netisrs to be scheduled.
1998-07-07 18:27:13 +00:00
61cdca4a6d
Remove unused file.
1998-07-07 17:59:56 +00:00
d20b5cf136
Clean up included files.
1998-07-07 17:51:54 +00:00
49ed29ab05
The INTF_RBF bit of INTREQ is mirrored in SERDAT. As we would read this
...
register anyway when the bit is set, we can safe one of the (slow) custom
chip accesses by using this bit.
Sounds ridiculous, but at a hardware FIFO depth of 1 and ~1 usec per
access (at IPL 5) it might help the highspeed addicts.
1998-07-07 16:46:38 +00:00
2ba4227a6e
from OpenBSD:
...
date: 1998/06/24 20:05:03; author: deraadt; state: Exp; lines: +4 -4
initialization error; joel@wmi.com
(affects debug printout only)
1998-07-07 14:13:51 +00:00
cbb7aa93f0
from FreeBSD:
...
wpaul 1998/07/02 08:36:36 PDT
Modified files:
sys/i386/boot/biosboot start.S
Log:
Add workaround to allow the FreeBSD boot block to work on
Kapok Computer Co. notebook with AMI 'WinBIOS' which seems to insist
on having a short jump and nop as the first instructions in the
boot sector code. The prevailing theory is that the BIOS is doing
some sort of boot sector virus detection and refusing to run any
boot block that doesn't start with the same instruction sequence as
MS-DOG boot sector code. If this is the case, it would be nice if it
actually printed an error message to this effect instead of just
saying 'FAILED.'
This workaround has no effect on the boot sector code other than to
increase its size by three bytes.
1998-07-07 13:58:59 +00:00
dbd55159a2
Teach dec_axppci_33_init() a little about the nsio config registers,
...
enable the nsio IDE, and leave the config register ISA ports mapped.
1998-07-07 08:49:12 +00:00
8f2575ec87
Use fixed-size types.
1998-07-07 04:29:42 +00:00
7b2bea06c6
Declare llcintrq here.
1998-07-07 03:26:55 +00:00
6f5a4a9d23
extern'ize llcintrq.
1998-07-07 03:26:42 +00:00
e357da6de3
Don't conditionalize externs on #if ... LLC ...
1998-07-07 03:24:53 +00:00
9ab51d2224
Make this compile again.
1998-07-07 03:22:03 +00:00
4a463e49fe
defopt CPU_* options in opt_cputypes.h
1998-07-07 03:05:15 +00:00
d94474ccc9
General update:
...
Added genassym.cf
Removed lderr which should never have gotten in
Removed lots of dead code from locore.s
Added some softint stuff to intr.c
Added support for halt -p
esp and le both use bus_dmamap_*() functions now
instead of kdvma_mapin()
groundwork for PCI (but we still have no drivers for
any sun4u PCI devices)
1998-07-07 03:05:02 +00:00
6d4420e5b2
Fix compile errors: #if DDB -> #ifdef DDB
1998-07-07 03:04:34 +00:00
3d4c1e7372
Cleanup ofw_boot().
...
Remove un-necessary includes.
1998-07-07 02:45:00 +00:00
88139fff5a
Never, ever, ever, ever include "assym.h" in C source file.
1998-07-07 02:02:53 +00:00
2abb91b62a
Nuke a redundant cache clean in pmap_enter() (from Neil Carson).
1998-07-07 01:18:47 +00:00
2194175b24
KNF.
1998-07-07 00:48:11 +00:00
35bb79bc83
Oops, fix typo, pointed out by Urban Boquist <boquist@cs.chalmers.se>.
1998-07-07 00:40:27 +00:00
6124345626
Account for an offset frame buffer address. This change is somewhat
...
different than the one supplied by Paul Goyette in PR 5702, but
has the same effect.
1998-07-07 00:33:39 +00:00
6c2540b9a5
Removed unnecessary bug-workaround headers.
...
Minor compilation and header tweak.
1998-07-07 00:16:34 +00:00
065cac9798
Delete bogus (void) cast of m_freem (which is already a void function..)
1998-07-07 00:04:59 +00:00
68dd742555
Include opt_armfpe.h
1998-07-06 18:13:26 +00:00
14119e2944
use #ifdef INET so this compiles again
1998-07-06 13:51:32 +00:00
8af687b575
Add mixer output selection.
...
From gson@araneus.fi (Andreas Gustafsson)
1998-07-06 11:12:21 +00:00
ab3827619d
Add AudioNselect.
1998-07-06 11:11:34 +00:00
2395483fe4
* Use tlbflush and not pmap_update to flush the cache.
...
* For the pc532, there is no need to have different implementations
of pagemove for UVM and bsd-VM.
1998-07-06 09:42:56 +00:00
d41434d3ae
Cleanup explict Makefile dependancies.
1998-07-06 02:43:38 +00:00
9161d5ab60
Include opt_pmap_debug.h for PMAP_DEBUG defopt.
1998-07-06 02:40:42 +00:00
3682a37511
Include opt_compat_old_ofw.h for COMPAT_OLD_OFW option.
1998-07-06 02:36:52 +00:00
94df6c50f4
defopt COMPAT_OLD_OFW and PMAP_DEBUG.
1998-07-06 02:35:34 +00:00
9ed6d03641
Always include arm32/disassem.h
1998-07-06 02:33:25 +00:00
572dcd8575
Include opt_armfpe.h
1998-07-06 01:56:40 +00:00
f10dbf227d
defopt ARMFPE.
1998-07-06 01:54:56 +00:00
5df95c3336
Junk the DISASSEMBLE macro and just call disassemble() directly.
1998-07-06 01:54:36 +00:00
70fba3ee34
postmortem() is no longer used in this file.
1998-07-06 01:52:26 +00:00
a96139b744
Include opt_uvm.h and define Lcnt appropriate for UVM or non-UVM configs.
1998-07-06 01:04:17 +00:00
8b4b75b9ea
The ARMFPE option is never enabled by default any more.
1998-07-06 00:59:21 +00:00
c73c7674d7
defopt IRQSTATS.
1998-07-06 00:53:07 +00:00
ac8d41742b
Remove MOUSE_IOC_ACK option as this is now standard.
1998-07-06 00:49:20 +00:00
d016feb2d7
Define MOUSE_IOC_ACK as standard.
1998-07-06 00:43:28 +00:00
9126d07941
defopt XSERVER.
1998-07-06 00:42:37 +00:00
e110bd8a6a
defopt IRQSTATS and XSERVER
1998-07-06 00:41:17 +00:00
36af051383
Update functions that missed the previous name space change.
1998-07-05 23:31:16 +00:00
b37021c1a1
defopt NATM.
1998-07-05 22:48:05 +00:00
9bf2ba0928
Garbage-collect ``needs-flag'' from attributes ether, fddi, arc:
...
NETHER, NFDDI, NARC are not used anywhere. Remove #include "ether.h",
which had no effect.
Removes clash with "options NATM" for native-ATM network protocol stack.
1998-07-05 22:29:51 +00:00
8b42dd3900
defopt COMPAT_NETBSD_*.
1998-07-05 18:59:40 +00:00
3472ba67bb
* defopt COMPAT_{09,10,11,12,13} and COMPAT_NOMID (from unsaved buffers).
...
TODO: revisit interaction between native compat and emul compat usage.
1998-07-05 18:27:18 +00:00
3e0c580f27
Add opt_compat_netbsd.h with COMPAT_{NOMID,09,10,11,12,13}.
1998-07-05 17:47:54 +00:00
870e46e9c4
Include required "opt_ddb.h" header file.
1998-07-05 14:33:56 +00:00
d275e56dee
* defopt COMPAT_{09,10,11,12,13} and COMPAT_NOMID.
...
TODO: revisit interaction between native compat and emul compat usage.
1998-07-05 08:49:30 +00:00
023ee4f133
Started the esp scsi driver.
...
Fixed bus_space_handle_t in nextdma device.
Fixed scsi interrupt define.
1998-07-05 07:53:44 +00:00
b8fb6644ae
Add NFS_BOOT_RWSIZE option to defopt opt_nfs_boot.h
1998-07-05 07:20:27 +00:00
011f2bda08
defopt NS, NSIP.
1998-07-05 06:49:00 +00:00
5c0c5dd0b4
defopt ISO TPIP.
1998-07-05 04:37:35 +00:00
5b64a1fc00
"PS" alias for "SR" clashes with netccitt/pk.h. ifdef out.
1998-07-05 04:14:56 +00:00
fe484937cf
defopt LLC
1998-07-05 03:14:41 +00:00
1a0b4c13e3
defopt HDLC.
1998-07-05 02:25:17 +00:00
8db0fcdbf7
defopt CCITT.
1998-07-05 02:12:22 +00:00
2670278a47
_inqsue and _remque are used by ccitt and iso networking code:
...
Add #ifdefs to enable them. (compiles and links, but untested.)
1998-07-05 02:10:14 +00:00
f2a2327e0a
defopt EON.
1998-07-05 01:06:49 +00:00
3751946b97
defopt INET, NETATALK.
1998-07-05 00:51:04 +00:00
0ed4d699d0
defopt DDB.
1998-07-04 23:12:39 +00:00
15f982f580
port-i386/5706: I had no problem with the previous patch, but someone
...
else has. Rolling it back while we try and figure it out.
1998-07-04 22:29:46 +00:00
466e784ee1
defopt DDB.
1998-07-04 22:18:13 +00:00
3d29b1e56c
Shield `#include opt_*.h'.
1998-07-04 08:44:04 +00:00
0a1e71abf1
Fixed pre-MMU rom console printing.
...
Fixed probing of the segment list on color NeXT's.
Added some debug messages on console as it reads the hardware config.
1998-07-04 05:36:05 +00:00
e558885a0e
Minor enhancements:
...
1) Quirk entries for Storage Tek 9490 (Timberline) and D3 (Redwood)
drives.
2) Modification to st_loadtape to do a REWIND to BOT if the
action is a load and the tape doesn't support the LOAD command
(9490, SD3, and IBM 3590).
3) Cleaned up the 'undersized user record' error message to
make a little more sense.
Various bug fixes:
kern/1275: Now returns values in dsreg and erreg and sets resid
(as best as it can for a 16 but integer). See also
a recent change to mtio.h. We are declining to fix
the portion of this bug about naming a more specific
SCSI device. Since there is nothing programmatic
you can do with that information, it is not useful
to pass back at this time.
A side effect of this change is that doing MTIOCGET
also forces a mode sense (to get the current state
of WRITE PROTECT).
kern/5647: Now no longer logs to the console ILI or Filemark or (first)
EOM (on write) errors (unless SCSIDEBUG is set).
kern/5525: Substantially increased timeouts for a variety of
operations, and split them into categories of
I/O, Space, and Control operations (each have
likely different inherent times). I/O is for
reads/writes. Control is for mode sense/select.
Space is for spacing the tape.
Until EOM handling is changed, though kern/391 is still not fixed. A side
effect of EOM handling is that you now always 'lose' (to the writing
application's view) the last write since EIO is what is returned on
EOM detection during writes. Hopefully the reader applications don't
get too bent out of shape by this.
1998-07-04 01:50:20 +00:00
205c293676
Patches from Justin that handle some REV B AIC7880 problems
1998-07-03 23:45:10 +00:00
34c823e939
A "GENERIC" kernel configured with a memory disk root. The miniroot can
...
now be inserted into the kernel for a self-contained installation kernel.
No more questions or problems trying to copy the miniroot to the swap
partition.
1998-07-03 22:27:59 +00:00
65346d4042
Add memory disk.
1998-07-03 22:24:45 +00:00
14a5ad4ce6
Make 'end' references consistant. Fixes PR#5670.
1998-07-03 22:21:42 +00:00
a18ed5d074
add missing ";" for non-UVM systems
1998-07-03 21:32:43 +00:00
7a199bc2de
kern/1275: add some clarification about what fields are updated from the
...
tape driver. Basically, we'll report what we can for resid, dsreg will
reflect RDONLY and MOUNTED, and erreg will retain the last seen Sense Key.
An MTIOCGET will clear these.
1998-07-03 20:25:20 +00:00
bb85c60cdc
Add "mainbus0" and "cpu*" entries that used to be in std.pmax. GENERIC
...
should now 'config' without errors.
1998-07-03 20:06:09 +00:00
3950d164c0
Add missing include of "opt_nfsserver.h".
1998-07-03 20:03:04 +00:00
f4918cb223
kern/5514: take the submitter's advice, at least partially. The time it
...
takes to do IELEM can be proportional to the number of elements, but is
also affected by wierd things like how readable the barcodes on the
media are. There are worst case scenarios I've seen where there are
white labels on the back of tapes with pencilled in labels which is
*just* close enough to being a bar code that an Exabyte 120 would
peer at them myopically and long enough for a *really* long time to
pass in inventorying the jukebox.
I've upped the limit to be proportional to 5 minutes per element. That
is long enough that someone I'm sure will complain about "you wait
to long and should time out" for broken h/w.
As is also noted in the PR, there are a lot of other issues here. It's
really also a question as to whether to update this driver or go
with CAM's driver. This one doesn't have switching between block
descriptors and not, doesn't support volume tag setting, and so on.
Time is limited. This PR should have been closed and fixed right away,
tho.
1998-07-03 19:11:25 +00:00
21f84e9128
Add nvram device support.
1998-07-03 11:50:32 +00:00
8cfe8959a6
Fix TCPS_HAVERCVDFIN() to actually catch all TCP states in which a FIN
...
has been received (CLOSE_WAIT, CLOSING, LAST_ACK, and TIME_WAIT).
From David Borman <dab@bsdi.com>.
1998-07-03 05:39:56 +00:00
8978015d51
Mark the kernel pmap `active' in pmap_bootstrap().
1998-07-03 05:22:10 +00:00
b457cc5098
For now, do not build just "netbsd" as the root device probe cannot
...
distinguish wd0, cs0, etc. Build only netbsd_netboot and netbsd_wdboot.
1998-07-02 23:39:22 +00:00
efee8aedfa
If GENERIC has SCSIVERBOSE on, having it off here makes no sense
1998-07-02 23:36:59 +00:00
33f066d24c
Implement the shrinking and no-change bits of the Linux mremap(2) system
...
call, provided by Urban Boquist <boquist@cs.chalmers.se> in PR #5693 .
Add a comment about how one might implement the growing bit of mremap(2).
1998-07-02 23:26:58 +00:00
76cd67b8c7
Allow netif_getether() to use sif->sif_macaddr() on the Sun-3X
...
but check the PROM rev first, and print some info I want when
a PROM earlier than 3.0 is found. (Then just try it!)
1998-07-02 21:58:25 +00:00
4b50f96523
Add strncmp.c
1998-07-02 21:36:00 +00:00
197650c433
Reduce flushcache'd area.
1998-07-02 19:26:02 +00:00
a8ce5c2403
Console support.
1998-07-02 18:58:32 +00:00
f1b1f5211a
Display/Keyboard console support (by calling Openfirmware)
1998-07-02 18:46:28 +00:00
ee91417fc2
Use BAT to map Openfirmware work area.
1998-07-02 18:21:03 +00:00
29f991cc2f
Fixup last revision to zs.c. Keep a lot of the comment cleanup, and
...
keep the explicit clearing of interupts in zscnprobe.
1998-07-02 17:32:03 +00:00
b4d0730191
Cosmetic change.
1998-07-02 14:39:51 +00:00
0ca02c68a7
Thinko in last fix: we have to actually check each address for a copy on
...
our ifp, else we might fail for some strange configurations.
1998-07-02 14:00:39 +00:00
d8b8a41918
The rewrite of if_arp.c to work with the hashed interface address lists
...
(1.44) missed a test for the right interface, making some machines answer
to some bogus arp requests (like for WHO-HAS 127.0.0.1).
The quick patch in 1.46-1.47 does not work for so-called "unnumbered"
interfaces, that is, (point-to-point) interfaces that share their local
address with another (e.g., the Ethernet) interface.
We add a macro to in_var.h, to step (in the current implementation) through
the hash chain and fine more entries with the same address, and use that
in if_arp.c to find one which belongs to our interface.
1998-07-02 11:39:56 +00:00
f31b504207
Change not-in-tree drier stubs to use needs-flag, not needs-count,
...
and use needs-count only where acutally used (qvss, qdss, ts-11)
1998-07-02 07:55:29 +00:00
469eb58301
Fix pread64/pwrite64 wrt. argument translation.
1998-07-02 02:20:21 +00:00
e5f49cece3
Regen: pad off_t args in pread/pwrite/preadv/pwritev.
1998-07-02 01:24:24 +00:00
d4e618b3a5
Argh, pad the off_t args in pread/pwrite/preadv/pwritev. System call
...
numbers don't change since the window of brokenness was so small (1 day).
1998-07-02 01:23:33 +00:00
4f500bad2e
Another printf("%:"...) bites the dust (->vprintf(...))
1998-07-02 00:47:30 +00:00
efa0b5e2f5
fix the comment
1998-07-01 23:12:42 +00:00
294fa42b6c
Use the shared ../libsa/xxboot.c
1998-07-01 22:56:45 +00:00
c426f6cd97
Replace {net,ufs}boot/boot.c with a shared libsa/xxboot.c
1998-07-01 22:51:43 +00:00
e9b40e3d85
Dont' check sysflags here... just look for NHPIB or IHPIB device IDs.
1998-07-01 22:47:12 +00:00
a1e53914d7
If sysflags tells us we have an internal HP-IB interface, don't bother
...
reading the DIO device ID at select code 7, but rather hard-wire the ID
to the IHPIB ID. This prevents us reading what might look like a valid
ID to another device when IHPIB is present. (IHPIB doesn't always return
a correct device ID, grumble.)
1998-07-01 22:46:29 +00:00
06fc3488e2
Moved rom memory configuration reading code into nextrom.c from machdep.c
1998-07-01 22:23:40 +00:00
3a5d43569e
changed diagnostic panic into a printf since an unexpected condition appears
...
to happen every once in a while. (The DMA interrupt gets called w/o
the completed bit set)
1998-07-01 22:14:44 +00:00
f83df102e6
Regen.
1998-07-01 21:59:20 +00:00
87ee222a07
Add vendor IDs for Hewlett-Packard, Interphase and Mylex; add a product ID
...
for the Interphase Seahawk 4811 FDDI Controller.
1998-07-01 21:57:32 +00:00
e89e603343
_GLOBAL_OFFSET_TABLE_ needs a _C_LABEL() wrapper, too.
1998-07-01 21:42:51 +00:00
725b3015b6
Strip extra underscore on _mcount on ELF.
1998-07-01 20:55:45 +00:00
28260456a9
Add relocation definitions used by ld.elf_so.
1998-07-01 20:43:56 +00:00
3733eac8e4
Undo a thinko in the various VIA2 isr loops: increment
...
bitnum inside the loop, not as part of the condition.
1998-07-01 18:57:36 +00:00
3664a056b3
Align output for Tape specific bits and use new Sense Key defines (for clarity)
1998-07-01 17:18:45 +00:00
6aa030f90b
Use new Sense Key defines (for clarity)
1998-07-01 17:16:46 +00:00
fb267f06f0
On ELF, make __indr_reference undefined and __warn_references do nothing,
...
as on Alpha. This should be fixed to do something in both cases.
1998-07-01 17:14:51 +00:00
a228166c1a
oh, for goodness sake, define the bloody Sense Keys...
1998-07-01 17:04:31 +00:00
398759b74e
Whoops, forgot to bracket struct grfinfo with #ifdef GRF_COMPAT.
1998-07-01 14:52:21 +00:00
f170a53f0b
Add a GRF_COMPAT option so that old-style grf ioctl() code can be
...
removed from the kernel.
1998-07-01 14:49:07 +00:00
1aab7e8c23
Added boot program support for the SGEC Ethernet controller, present on
...
some VAX 4000 maachines. Written by Jay Maynard. (jmaynard@phoenix.net )
1998-07-01 10:52:10 +00:00
7b2ca7e1ba
RPB number for SGEC Ethernet controller (ze).
1998-07-01 09:37:11 +00:00
7897fc307b
Add support for:
...
DEC_1000
DEC_1000A
DEC_ALPHABOOK1
DEC_EB66
Remove support (ran out of space) for: ahc and bha. SCSI must be ncr or isp.
This will be fixed soon by defining an optional, two-floppy install
alternative.
1998-07-01 09:14:02 +00:00
d663cd1216
better MFC parsing (for 3c56[23]D), and make sure the pf is zeroed out before using it (for adaptec 1460b)
1998-07-01 07:13:41 +00:00
213e26d670
OpenFirmware glue for ISA SoundBlaster and compatible devices.
1998-07-01 06:52:12 +00:00
b6d050ef0f
Make use the `end' consistent.
1998-07-01 06:05:18 +00:00
da26383918
Change _C_LABEL() to use proper underscoring depending on __ELF__ or not.
1998-07-01 02:35:24 +00:00
dd0758a46a
Oops, fix a couple of brain-o's.
1998-07-01 01:23:25 +00:00
20f9998e6f
allow a config file to redefine MAXPHYS
1998-07-01 00:51:15 +00:00
b413670e49
Regen.
1998-07-01 00:41:55 +00:00
f76a7b5d83
Add a bunch more system calls from Digital UNIX 4.0D.
1998-07-01 00:41:36 +00:00
1a371b88e4
Add a forward declaration for struct iovec.
1998-07-01 00:03:23 +00:00
576184d528
Put pread64() and pwrite64() back in here, but just call the native
...
NetBSD system call with no argument translation.
1998-06-30 23:34:05 +00:00
c21db87c09
Regen.
1998-06-30 23:32:07 +00:00
641ea73301
Revert the last change; it had a side-effect that I didn't think about.
1998-06-30 23:31:28 +00:00
924ead1c85
Prototype preadv(2) and pwritev(2) if !defined(_XOPEN_SOURCE).
1998-06-30 19:48:56 +00:00
f8fe385b78
Rewrite svr4_sys_pread() and svr4_sys_pwrite() in terms of the native
...
NetBSD pread(2) and pwrite(2). These still require indirection because
the arguments need to be converted to the correct types.
Delete svr4_sys_pread64() and svr4_sys_pwrite64(), since the arguments
for these calls do not need conversion, and the syscall switch calls
the native NetBSD system calls directly.
1998-06-30 19:42:56 +00:00
e05b7cc70b
Regen: syscalls.master changed to reflect native pread/pwrite.
1998-06-30 19:40:55 +00:00
cf54391ad7
Now that NetBSD has pread(2) and pwrite(2), we no longer need to indirect
...
through SVR4 emulation layers to handle SVR4's pread64(2) and pwrite64(2),
since NetBSD's arguments are the same as the SVR4 64-bit system call
arguments.
1998-06-30 19:40:13 +00:00
bc799897fc
Implement pread(2), pwrite(2), preadv(2), and pwritev(2).
1998-06-30 19:36:24 +00:00
1f37d1d569
Regen: added pread(2), pwrite(2), preadv(2), pwritev(2).
1998-06-30 19:34:20 +00:00
f0dda0d383
Add positional read and write system calls:
...
- pread() (#173 ) and pwrite() (#174 ), which are defined by XPG4.2. System
call numbers match Solaris.
- preadv() (#289 ) and pwritev() (#290 ), which are the positional cousins
of readv() and writev(), but not defined by any standard.
1998-06-30 19:33:11 +00:00
67b0c87dc3
Overkill patches to make serial console work again. Should also make
...
serial echo work, but not sure. Tested by Paul Goyette.
A few of these changes can probably be backed out, but I'm not sure which.
This part should work for now, and get things going again. These fixes
should also get rid of the problem of things crashing just as zstty0 gets
configured.
1998-06-30 18:13:21 +00:00
9e54ebca91
Add WSS attachment for ISAPnP. Not tested yet.
1998-06-30 17:28:00 +00:00
85cca39e28
Add a monitor mute.
1998-06-30 16:54:52 +00:00
2a91c2b84f
Regen.
1998-06-30 14:42:00 +00:00
bb9ccdf373
Add a 2 Micro CardBus controller.
1998-06-30 14:41:29 +00:00
509c98eb23
Add another modem card.
1998-06-30 14:14:44 +00:00
94b9143ddd
add RCSID
1998-06-30 12:22:36 +00:00
c0eed6da3d
sync with -current after a long silence
1998-06-30 11:59:09 +00:00
518a9a5b6a
Enable use of reversed and underlined text. The DEC Isolatin character
...
set now also work correctly. Add blinking cursor.
1998-06-30 11:29:37 +00:00
9a04d7d9f2
adapt to wscons interface change
1998-06-30 09:02:08 +00:00
792ea056b9
Nuke unused variable.
1998-06-30 08:27:39 +00:00
fae3bf0887
Add a monitor mute. The mixer here really needs more work for the
...
Crystal chips.
1998-06-30 08:24:56 +00:00
3858cce05c
Recognize the CS4236B (although we don't yet use any of the extensions).
1998-06-30 07:45:22 +00:00
b6781dbaa2
Split up read/readv/write/writev into the system call front-end and
...
the guts that actually perform the I/O request.
1998-06-30 07:39:22 +00:00
a4a34ba74a
Add two additional arguments to the fileops read and write calls, a
...
pointer to the offset to use, and a flags word. Define a flag that
specifies whether or not to update the offset passed by reference.
1998-06-30 05:33:11 +00:00
53559837db
<dev/sun/disklabel.h> not <dev/sun/sun_disklabel.h>
1998-06-30 04:35:37 +00:00
3fec37df49
Fix warnings from recent ddb_init() change: handle end and esym
...
consistently.
1998-06-30 04:16:00 +00:00
34e62af19a
- Fix a bug that prevented one from requesting a subset of a property
...
containing multiple values.
- Add a way to get the "dma" property for a node.
1998-06-30 00:09:36 +00:00
7931fb2172
Fix spalling misteak: indentify -> identify
1998-06-30 00:08:32 +00:00
d2e377891d
Get the interrupt share type from the PnP info.
1998-06-29 22:42:32 +00:00
ad9b5bf5f0
Interrupt share type is EDGE.
1998-06-29 22:42:09 +00:00
3be1ffe6a0
When hooking up the interrupt handler, use an interrupt share type
...
specified by the front-end.
1998-06-29 22:40:56 +00:00
02e2e73771
fix VT300 tab stop report format
1998-06-29 21:14:40 +00:00
406be71827
don't set a tabstop in column 1
1998-06-29 21:10:53 +00:00
drochner