Use the check recommended by the Digital Workstation engineers; look
for Miata 1 systems (i.e. with Intel SIO). From Andrew Gallatin.
- Update copyright (Pyxis and BWX).
device 4. Miata 1.5 and Miata 2 have a Cypress at device 7 and PCI IDE
at functions 1 and 2 of the Cypress (like the PC164SX). These on-board
PCI IDE controllers are wired to compatibility mode, so don't bother
trying to map the interrupt.
on the ALCOR2 and Pyxis. BWX is enabled iff:
- It hasn't been disabled by the user (patch `cia_use_bwx' or build cia.o
with the option "CIA_USE_BWX=0"),
- it's enabled in CIA_CSR_CNFG,
- we are running on an EV5-family processor,
- BWX is in the processor's capabilities mask.
the scatter/gather TLB cannot be invalidated on these chips. So, to
work around this, we configure the otherwise unsed DMA Window 2 as a
2M SGMAP window at 128M, point all of its page table entries at the
DMA spill page, and, when the TLB is to be invalidated, put the PCI bus
into loopback mode, and create a target hit on Window 2 every 64k for
the number of TLB entries (plus a few ... it seems to not work unless
we read a few extra times), forcing out old TLB entries to make room for
the new, dummy target hits.
day.
- Convert to use bus_dma.
- Fix cleaning up unaligned start address.
- Correctly determine if the device supports Fast SCSI, and adjust the
minimum sync period accordingly.
- Compute minimum sync period correctly on the 25MHz devices.
- Use GPI2 to determine if we're a 25MHz or 40MHz device.
- Currectly determine SCSI ID and "fast mode enabled" for the built-in
TCDS on DEC 3000 models, using cached information from the PROM environment.
the namespace accordingly.
- Set FCLK in the CFG3 register if we have a > 25MHz clock.
- Indicate that we support Fast mode to the back-end if we're told we're
fast by the TCDS layer.
- Correctly compute the minimum sync period.
- Fix the autoconfiguration model; the TCDS children don't attach to
TurboChannel, so don't make it look like they do.
- Make the driver use bus_space (not bus_dma yet; soon)
- Recognize the PMAZ-FS (baseboard fast SCSI on DEC 3000s) and the
PMAZB-AA (TCDS option card) and PMAZC-AA (TCDS fast SCSI option card).
- Rearrange it a bit, so that it can eventually be made into an "MI"
TurboChannel driver (i.e. work on DECstations).
thorpej