8799a9c64b
give a default value to net.inet.ip.maxfragpackets, to protect us from
...
"lots of fragmented packets" DoS attack.
the current default value is derived from ipv6 counterpart, which is
a magical value "200". it should be enough for normal systems, not sure
if it is enough when you take hundreds of thousands of tcp connections on
your system. if you have proposal for a better value with concrete reasons,
let me know.
2001-04-16 17:03:33 +00:00
88c05e77fe
reads at or after EOF should "succeed".
2001-04-16 14:37:43 +00:00
020a050984
Randomize the statclock period properly. We use the same algorithm as the
...
sparc port.
2001-04-16 14:12:38 +00:00
b2bff5fc7f
add receive ethernet bpf tap
...
keep receive ethernet crc and set M_HASFCS
change bus_dma MD fields to keep xfer_len for entire map
instead of per segment
turn off automatic dma restarts in preparation for changing
scsi driver to handle them.
add dma debugging routines to keep history of dma states
tweak checking for unusual dma limit register
2001-04-16 14:12:12 +00:00
511ae4853c
Remove extra whitespace after \.
2001-04-16 13:45:31 +00:00
14dceb11ef
Regen.
2001-04-16 10:42:39 +00:00
6f4ae4bff8
Add lots of storage devices.
2001-04-16 10:42:19 +00:00
00ec577a8e
add VR4122 specified register definitions.
...
XXX: vrip.c is not yet supported VR4122.
2001-04-16 09:55:56 +00:00
8a19f18c0b
fix typo in comment.
2001-04-16 09:17:05 +00:00
22a18cbcb3
Add macro for extracting the whole key as one byte value.
2001-04-16 01:09:31 +00:00
bafbeaf802
Use the bi-directional protocol if the printer supports it.
...
This is the way that e.g. HP recommends (but then some of their printers
have a bug that makes the input pipe useless anyway).
Also try reset both the 1.0 and 1.1 ways.
2001-04-16 00:18:06 +00:00
1bd443444b
In splx(), don't call spl0() unless the ssir != 0.
2001-04-15 23:26:05 +00:00
00f815f803
Clean up soft interrupt related stuff a bit.
2001-04-15 23:07:34 +00:00
b1b0b4bc9a
Regen.
2001-04-15 22:33:37 +00:00
9c6b6d7b02
Add more HP devices.
2001-04-15 22:33:23 +00:00
9e3772786d
Add header files for PPC and SSP register definitions.
2001-04-15 17:27:26 +00:00
1875326646
Use the second channel to generate 128Hz statclock interrupts.
...
top(1) reports more accurate CPU times (user/sys/intr/idle) now.
2001-04-15 17:19:32 +00:00
f06533a1ee
Add definitions of C99 integer format conversion macros.
...
XXX Fastest minimum-width integer types haven't been decided upon yet.
2001-04-15 17:13:04 +00:00
739cb75837
Add definitions of C99 specified-width integer type limits.
...
XXX Fastest minimum-width integer types haven't been decided upon yet.
2001-04-15 15:29:02 +00:00
849d818db4
Remove some unused variables.
2001-04-15 15:01:35 +00:00
c544d84b41
Catch up with ansi.h rev. 1.12: define SIZE_T_MAX and SSIZE_MAX as long
...
integer constants in ELF environments.
2001-04-15 14:16:08 +00:00
80ad23a5da
Catch up with ansi.h rev. 1.12: define intptr_t and uintptr_t as long
...
integers in ELF environments, like is done with ptrdiff_t.
2001-04-15 13:38:19 +00:00
05859f4c8e
Add __COMPILER_UINT64__="unsigned __int64" syncing with the change
...
of arch/mips/include/int_types.h, revision 1.4.
2001-04-15 12:27:32 +00:00
5a15be6a18
Don't panic on a stray IRQ, just log it and hope it goes away. This works for
...
my acemidi card at least.
2001-04-15 11:59:43 +00:00
b86cb140c5
Use a better symbolic name.
2001-04-15 10:26:36 +00:00
60f9754d4b
Add __COMPILER_UINT64__="unsigned __int64" syncing with the change
...
of arch/mips/include/int_types.h, revision 1.4.
The version of the binaries are '1.17.3 2001.04.15'
2001-04-15 10:10:43 +00:00
595f18daf9
Add quirk for printers that cannot handle bidir mode (not used yet).
2001-04-15 09:38:01 +00:00
d828968798
Regen.
2001-04-15 09:28:31 +00:00
3865f3dfc7
Add a bunch of HP printers.
2001-04-15 09:28:12 +00:00
d62038a18e
Add Aztech sound card found in HP Kayaks.
2001-04-15 03:31:37 +00:00
d1b6307b88
do not copy TTL field on ipsec tunnel mode encapsulation. sync with kame
2001-04-15 01:55:49 +00:00
69337b1dd0
Correct some typos. Add 2 more macro's to extract data from directory entries. Add $
2001-04-15 00:21:38 +00:00
75f6b62025
Add long-missing(!) <machine/math.h>.
2001-04-14 22:48:31 +00:00
cdcf9f46c5
Add definitions of C99 integer constant macros.
...
Tidy Makefiles up a little.
2001-04-14 22:46:19 +00:00
a7c20e5788
Add definitions of C99 integer constant macros.
2001-04-14 22:38:33 +00:00
6c7d3e3521
Add rudimentary support for the ACE Midi-Connect card which abs gave me.
...
Currently it appears as a "com" port, which is less than useful, and
occasionally generates stray interrupts. "stty -f /dev/tty00 31250 raw"
does enable it to talk to a nearby MIDI device, though.
2001-04-14 20:39:23 +00:00
cee3528adc
When checking if an IRQ is active, check for _all_ the right bits' being set,
...
not just some of them.
2001-04-14 19:58:58 +00:00
7e0b361d84
Fix for kernel alignment crash reported on port-alpha. A developer went on
...
a happy code sweep (in the kernel!) and constified a random selection of
kernel objects. This changed the alignment of the previously-aligned-by-
accident seqprog array, and exposed a lurking bug. I can't decide if this
is good or bad.
2001-04-14 19:37:17 +00:00
763e66f5de
Initial commit of wsmouse driver for the IOMD quadratic mouse.
2001-04-14 19:22:43 +00:00
e0e3b230c1
Remember to initialise the interrupt handle.
...
Bugs like this are my penalty for having my only supported podule in slot 0.
2001-04-14 18:39:20 +00:00
9beeeabe1b
Define a PAGER_MAP_SIZE of 4MB for the benefit of low-memory models.
...
XXX: This may still not be low enough for models with less than 8MB RAM...
2001-04-14 16:02:24 +00:00
4e845e001a
Accidently left COMCONSOLE configured
2001-04-14 14:51:04 +00:00
72eb64fead
Propagate __HAVE_GENERIC_SOFTINTR to assembly files.
2001-04-14 13:56:02 +00:00
81ece2d4bf
Only dispatch slnetisr & co if we don't have generic soft interrupts.
2001-04-14 13:54:38 +00:00
dd8c947561
Implement a real microtime() by reading the timer counter register.
...
On mvme147 this gives 6.25uS resolution, and 1uS on all other boards.
2001-04-14 13:53:05 +00:00
c605c91bdf
Fix bootline argument passing from the Bug PROM.
2001-04-14 13:43:07 +00:00
79283614b3
In procfs_readdir(), give /proc/# directories DT_DIR (rather than DT_REG).
2001-04-14 13:25:46 +00:00
7affdab52e
Add definitions of C99 minimum-width and greatest-width integer types.
...
XXX Fastest minimum-width integer types haven't been decided upon yet.
2001-04-14 12:19:49 +00:00
8b3fc18a1f
Generic soft interrupt implementation for NetBSD/i386. This could
...
probably be tuned somewhat, but this is a stop-gap measure to hold
us until Bill Sommerfeld's new interrupt code comes in from the
MP branch.
2001-04-14 06:49:30 +00:00
c025377acc
Cleanup of attachment code of framebuffers
2001-04-14 02:25:43 +00:00
e964ad79cf
Change the softintr implementation to be a bit more cache friendly
...
(though, sigh, slightly more expensive at softintr_schedule() time).
2001-04-14 00:45:13 +00:00
bf2dcec4f5
Remove the use of splimp() from the NetBSD kernel. splnet()
...
and only splnet() is allowed for the protection of data structures
used by network devices.
2001-04-13 23:29:55 +00:00
c18a98953b
Regen for moved Trident CyberBlade entry
2001-04-13 19:01:28 +00:00
1384b9cebc
Move the Trident CyberClade entry where it belongs.
2001-04-13 19:00:31 +00:00
48c15739e9
Slight readability improvement to rev. 1.39.
2001-04-13 17:05:27 +00:00
d3c7885319
Make sure that every time we touch the referenced/modified bits, we do a
...
pmap_update_page() to get all the mappings of that page up-to-date.
2001-04-13 16:37:28 +00:00
362ba8300c
Include USB and 1394 support (sun models now have them).
2001-04-13 16:26:41 +00:00
991d163aa2
Remove code from pmap_fault() that ws trying to do referenced/modified
...
emulation on kernel pages (and getting it wrong).
2001-04-13 15:09:35 +00:00
0fc6449078
Describe possible section types with a few words.
2001-04-13 15:01:29 +00:00
7b00aef2da
Rev 1.3 accidentally undid rev 1.2. Re-do it.
2001-04-13 14:50:47 +00:00
b5c707b2b6
Make it link with debug flag.
2001-04-13 12:51:43 +00:00
939159f6d0
Make it compile with debug.
2001-04-13 12:42:40 +00:00
ac01781de7
Make UBC_WINSHIFT a constant.
2001-04-13 12:40:16 +00:00
bcdfccea3c
Split the umass driver into the part that handles the X-over-USB protocol
...
(umass.c) and the part that handles scsibus/atapibus (umassbus.c).
This way the must port specific stuff can be removed from umass.c.
2001-04-13 12:24:10 +00:00
38c02444d9
Finally get rid of the UGLY and EVIL hack for avoiding tsleep().
2001-04-13 11:19:58 +00:00
cbcea5e84c
Do mii frobbing in process context.
...
Now we can finally get rid of the evil USBD_NO_TSLEEP hack in the aue driver.
2001-04-13 11:17:11 +00:00
b728f196e9
Comment out some flag stuff that isn't used. Someone should take a look
...
at this. There is something fishy with the mii code, the last argument to
mii_attach() is not being used in any meaningful way.
2001-04-13 11:14:55 +00:00
205b10ed17
Add a flag to mii_flags which will cause autonegotiation to use tsleep()
...
instead of callout. This way adapters which need a process context for
PHY register access (e.g. USB adapters) have a chance.
2001-04-13 11:12:36 +00:00
fbc07662f5
$NetBSD$ tag cleanup
2001-04-13 08:11:44 +00:00
eb0cfc6af5
s/$Id$/$NetBSD$/
2001-04-13 08:09:07 +00:00
c5a768d097
Add support for ADMtek AN985.
2001-04-13 00:18:11 +00:00
ed7afd2ad6
Regen.
2001-04-12 23:56:13 +00:00
23b1e2c46e
Some new device (from FreeBSD).
2001-04-12 23:55:58 +00:00
9071f4edbb
Make sure all tasks are remove on detach.
2001-04-12 23:54:56 +00:00
9133b51cd8
Replace the 'unsigned __COMPILER_INT64__' construct with a new name,
...
__COMPILER_UINT64__, to be supplied - if such a case is made, it shouldn't
be assumed that the unsigned type-specifier may be applied to it.
2001-04-12 22:01:18 +00:00
fdeb609887
Place a remark ... the old vidcconsole code can't handle the comconsole
...
not yet for it is called early in the init_arm() ... this needs to be
patched one day so it can be called very early; but is this possible ?
2001-04-12 21:54:06 +00:00
f13ec50e47
Clean up bus dma code for request/response queues.
2001-04-12 21:40:56 +00:00
c5a6653add
Use IPL_NET for now -- the only use of 1394 right now is for network
...
interfaces (IPv{4,6}-over-1394), and this allows us to get rid of
some evil interrupt mixing issues in the 1394 network code right now.
2001-04-12 21:39:31 +00:00
9e0af4a217
Add a __predict_true() to an extremely common case.
2001-04-12 21:11:47 +00:00
eed75ba69e
In uvm_km_kmemalloc(), use the correct size for the uvm_unmap()
...
call if the allocation fails.
Problem pointed out by Alfred Perlstein <bright@wintelcom.net>,
who found a similar bug in FreeBSD.
2001-04-12 21:08:25 +00:00
67e357f0a9
splimp -> splvm.
...
This, like all other uses of spl*() in VAX code, needs to be
scrutinized.
2001-04-12 20:38:25 +00:00
242cca702b
Part one of the COMCONSOLE repair ... it works now but the video console
...
is effectively dead instead... this needs work. Also the boottime switching
to the vidcconsole would be good.
2001-04-12 20:15:06 +00:00
5da5b5ae5b
Upon inspection of a 4000/600 dmesg, change the splbios to splubas.
...
XXX THIS CODE IS SERIOUSLY BROKEN! MSCP DEVICES ARE BLOCK I/O DEVICES,
AND THUS SPLBIO SHOULD BLOCK THEIR INTERRUPTS. The VAX port really
needs to get virtualized spl*() levels.
2001-04-12 20:13:26 +00:00
376be9fdf3
splimp -> spluba.
2001-04-12 20:08:09 +00:00
63edf2e11d
Protect the call to uba_done() with spluba().
2001-04-12 20:07:40 +00:00
ae66f2ea53
splimp -> splbio.
2001-04-12 20:05:12 +00:00
3d6b1bec1e
splimp -> splnet
2001-04-12 20:04:24 +00:00
06b19d90b8
splimp -> splbio
2001-04-12 20:03:35 +00:00
669641cb9d
splimp -> splvm (it's questionable whether or not this is really
...
the right level at all -- maybe splhigh? Anyway, XXX comment added
as well).
2001-04-12 19:45:25 +00:00
0d8e6faeb2
splimp -> splvm
2001-04-12 19:43:46 +00:00
b978c269f5
Delete SPL_IMP(). It is not used in IP Filter, and it aids me
...
on my quest to eliminate the foul beast known as splimp.
2001-04-12 19:41:53 +00:00
bc237413cb
Fixed an error in a comment
2001-04-12 19:32:35 +00:00
316dcc474b
splvec.splimp -> splvec.splvm
2001-04-12 19:21:20 +00:00
023e07a194
splimp -> spluba
2001-04-12 19:16:56 +00:00
c031c366f6
Add spluba().
2001-04-12 19:16:06 +00:00
9b2337e9d8
splimp -> splbio.
2001-04-12 18:34:56 +00:00
89fb12c497
splimp -> splhigh when frobbing netisr.
2001-04-12 18:28:40 +00:00
0f05a2b35c
splimp -> splhigh for frobbing the netisr.
2001-04-12 18:26:26 +00:00
f5940ea000
splimp -> splvm (XXX Time critical sections, but don't want to block
...
the clock).
2001-04-12 18:22:55 +00:00
909f3d7efb
splimp -> splvm (use IPL_IMP needs to be revisited).
2001-04-12 18:18:31 +00:00
d7333fb163
splimp -> splnet
2001-04-12 17:53:48 +00:00
ba0a86fa22
There are no level1 or level7 interrupts possible on the Milan...
2001-04-12 09:09:56 +00:00
477b193d09
support T1 card (LMC1200) properly. PR 12331 (patch from openbsd).
...
change DLT type to cisco HDLC, as lmc driver is hardwired to cisco HDLC
on driver attach. XXX we may need to revisit this, as if_spppsubr may want
to alter this later.
2001-04-12 07:50:54 +00:00
321e957c86
regen.
2001-04-12 07:47:16 +00:00
2ce6b3ba60
change symbol for LMC T1 card. part of PR 12331.
2001-04-12 07:46:00 +00:00
8507fcec54
Update these for Milan addresses.
2001-04-12 07:17:30 +00:00
bc6820dd0d
Regen.
2001-04-12 06:26:49 +00:00
ece3db982d
Add UltraSparc IIe PCI interface.
2001-04-12 06:26:20 +00:00
7a46b74c7b
splimp -> splbio.
2001-04-12 06:20:59 +00:00
b614ba3c5c
splimp -> splhigh
2001-04-12 06:08:44 +00:00
ff7a879497
splimp -> splvm
2001-04-12 06:07:42 +00:00
49a0cbf7f6
in adosfs_read(), only do the UBC thang for "FFS" files (ie. those that
...
don't mix data and metadata in the same sector). in adosfs_bmap(), set
the "run" return value to 0 to indicate the result is only good for 1 block.
these fix the rest of PR 12270.
2001-04-12 04:12:04 +00:00
a3fd502107
Nuke some unneeded splimp.
2001-04-12 03:16:56 +00:00
d94ce2f426
splimp -> splnet
2001-04-12 03:10:35 +00:00
4cb159296b
Remove an splimp() that really has no purpose in life.
2001-04-12 03:08:42 +00:00
5274818efc
Switch to USB_USE_SOFTINTR. The callout hack does indeed work
...
fine for systems without generic soft interrupts, even if it is
a little sub-optimal. Consider it a penalty for ports not
implementing a kernel API.
Addresses kern/11957. The PR has been open for 4 months, and
I have work blocked on the continued existence of splimp() in
the networking code.
2001-04-12 01:39:04 +00:00
f305e19aeb
Only if __HAVE_GENERIC_SOFT_INTERRUPTS is then splusb == splsoftnet
...
(because we register the interrupt with IPL_SOFTNET). However, if
we're using a callout, then splusb == splsoftclock (because the
callouts happen from the softclock interrupt).
Note that splsoftnet blocks softclock interrupts, but this is
meant to better describe what's going on.
2001-04-12 01:18:24 +00:00
11c012efcc
Just switch the RI_CENTER off for now ... just to avoid troubles with
...
the hardware scrolling code...
2001-04-12 00:42:50 +00:00
9767692eee
fix invalid reference to $fromconsole via DDB
2001-04-11 23:02:12 +00:00
62ec61f5e9
fix comment.
2001-04-11 20:13:52 +00:00
bb1594b20b
Integrated security review for signal delivery by Wolfgang Solfrank
2001-04-11 19:41:02 +00:00
745ab257dc
Put back all header files defining ioctls
2001-04-11 19:07:36 +00:00
3f7694f804
Adapt these for use on the Milan.
2001-04-11 14:45:07 +00:00
e366844be7
need to declare NULL for inline function.
2001-04-11 14:44:55 +00:00
b7f59127c9
re-add bt8xx.h (needed for fxtv, without which bktr is pretty much useless)
2001-04-11 09:07:21 +00:00
5dd91b669c
add VR4101 specific BCU registers.
...
add VR4122 specific BCU registers.
add cpu specific comments.
2001-04-11 08:52:59 +00:00
76c2f6d190
Regen.
2001-04-11 08:44:06 +00:00
c2b7bb4ddb
Add device id from PR 12611.
2001-04-11 08:43:47 +00:00
68d21310de
opt_vr41x1.h -> opt_vr41xx.h.
...
add 'options VR41XX' and kill 'options VR41X1'.
add 'options VR4101' (not yet supported)
add 'options VR4102'
add 'options VR4111'
add 'options VR4121'
add 'options VR4122' (not yet supported)
add 'options VR4181' (not yet supported)
these are for config level size optimization.
currenty, no optimization codes are exist.
NOTE: there are some incompatibility in VR4181 & VR4101 &
VR4102,4111,4121 group & VR4122.
GENERIC (for VR41XX series) has options VR4102, VR4111, VR4121.
2001-04-11 08:23:26 +00:00
372e5956ef
Only install headers which are actually used by our userland. This
...
saves about 2.2MB under /usr/include/dev/. Discussed on tech-kern@
recently.
I HOPE to get the list right. The headers I left in are ones
used for MI tools and those whose usage I discovered by grep over tree sources.
Feel free to put needed includes back in if you encounter anything which
should not be removed from lists.
2001-04-11 07:42:31 +00:00
f4e4c674a7
disallow userland programs from specifying addresses with IPV6_PKTINFO
...
setsockopt, if:
- the address is not verified by DAD (= not ready)
- the address is an anycast address (= not permitted as source)
sync with kame
2001-04-11 04:57:53 +00:00
8dc1d7cbac
Add bridge netisr glue (only used if no __HAVE_GENERIC_SOFT_INTERRUPTS).
2001-04-11 03:55:16 +00:00
f62e94272e
Add hooks for bridging.
2001-04-11 03:47:24 +00:00
e0b3faf07e
Add configuration glue for forthcoming bridge code.
2001-04-11 03:43:23 +00:00
4290b6b288
Make sure that this will compile on a big-endian system.
2001-04-11 01:47:18 +00:00
fe247cae7a
fix possible typo in comment.
2001-04-10 22:58:55 +00:00
dfb8f5f43f
Include isp_ioctl.h.
2001-04-10 21:52:15 +00:00
78a44662f5
Add initial implementation of ISP_SDBLEV, ISP_RESETHBA, ISP_FC_RESCAN,
...
ISP_FC_LIP and ISP_FC_GETDINFO ioctls.
2001-04-10 21:52:00 +00:00
7bcf01a29a
Note one other place that bogus interrupts can be measured.
2001-04-10 21:51:21 +00:00
81a6d0ec41
Add isp_ioctl.h.
2001-04-10 21:50:53 +00:00
5f8aa905e6
Add some HBA ioctl functions (LIP resets, rescan, setting debugging level).
2001-04-10 21:50:40 +00:00
4702254396
Process pfil hooks for Ethernet input and output.
2001-04-10 21:47:36 +00:00
4cbf0044c4
Add a PFIL_HOOKS filtering point to every network interface.
2001-04-10 21:45:39 +00:00
d039e70428
Remove the "asc" driver. It's never worked, and we should have an MI version
...
sometime.
2001-04-10 21:33:00 +00:00
247d880fc9
The Milan uses the U0 pin to switch the pci-bridge between little & big
...
endian mode. That's why I moved the 'wired' flag to U1.
2001-04-10 19:51:00 +00:00
dcc1c6a9fb
Take NFDISA into account.
2001-04-10 19:36:20 +00:00
f41aa15500
Add 802.1D (Spanning Tree) LSAP code.
2001-04-10 19:30:41 +00:00
4c8caed00d
Apply a bandage to delay() so that it takes a more suitable time on
...
StrongARM Risc PCs. It really should be replaced entirely, but I've got more
important bugs to fix.
2001-04-10 19:08:42 +00:00
edde8b993b
Add a DIAGNOSTIC check to see if delay() waits long enough (it doesn't on
...
my machine).
2001-04-10 18:58:56 +00:00
511e0204b1
Update to conform to new interface.
2001-04-10 18:57:49 +00:00
itojun