9745684ebe
Changes to the sudio system:
...
- It is now possible to handle devices that want "looping" DMA,
e.g. the SoundBlaster correctly. The WSS and SB drivers use this.
To do this several new methods were introduced in audio_hw_if.
- Different silence handling (forced by previous change).
- The audio driver can now be mmap()-ed, but due to problems in
the VM system only for writing for now.
- The OSS (Linux) audio emulation takes advantage of some of the
new features.
1997-07-27 01:16:32 +00:00
47c4af3536
use locator defines in "locators.h" to index cf_loc[]
...
still to be done and/or decided not to be done: replace all *UNK uses in
mainbus code with the native names from locators.h
1997-07-17 01:48:35 +00:00
8727da130b
In the name of backwards compatibility AUDIO_ENCODING_LINEAR has been
...
renamed AUDIO_ENCODING_SLINEAR and AUDIO_ENCODING_LINEAR reverts to the
NetBSD 1.2 sematics. A kernel with COMPAT_12 defined will accept
AUDIO_ENCODING_LINEAR and treat it as before, without COMPAT_12 it
will be rejected.
1997-07-15 07:46:04 +00:00
45097cab83
foosize()'s return value is in DEV_BSIZE units; adjust the size obtained
...
from the disklabel accordingly.
1997-06-24 00:38:46 +00:00
f5bf0d3701
wdsize(): only call wdopen()/wdclose() if not already open, per the
...
current `openmask'.
1997-06-18 20:39:55 +00:00
e63a553175
Change the interface between high and lowlevel audio drivers again:
...
Set the encoding parameters slightly differently.
Remove the SW encoding/decodinf functions from this interface
and move them to the audio_parameter struct; this is both more efficient
and flexible.
1997-05-09 22:16:27 +00:00
c4a52794f1
Convert to new orthogonal audio encoding scheme and implement
...
some of the new encodings. The change to ioctl AUDIO_GETENC is
NOT backwards compatible.
1997-05-07 18:51:31 +00:00
526ef2f618
Change the interface between the high and low level audio drivers
...
so that all audio encoding parameters are set at once. This simplifies
the interface and make error checking easier.
1997-04-29 21:01:33 +00:00
37b247edde
Renames: /dumpconf/cpu_dumpconf/, /boot/cpu_reboot/
1997-03-26 22:42:13 +00:00
b28684079f
Fix broken vidcaudio_set_format() prototype.
1997-03-25 05:09:01 +00:00
7a55cafeeb
Implement set_format.
1997-03-20 16:51:38 +00:00
07b064e02e
New ARP system, supports IPv4 over any hardware link.
...
Some of the stuff (e.g., rarpd, bootpd, dhcpd etc., libsa) still will
only support Ethernet. Tcpdump itself should be ok, but libpcap needs
lot of work.
For the detailed change history, look at the commit log entries for
the is-newarp branch.
1997-03-15 18:09:08 +00:00
ac3b8b13b7
Don't share the silence block between devices. Make silence filling work for
...
more encodings, and make it device-independent. From Lennart Augustsson, in
PR kern/3305.
1997-03-13 02:19:32 +00:00
c2a184bc45
Fix SA110 CPU ID.
1997-02-04 06:30:57 +00:00
7ef8e3bcd9
Fix declaration of the interrupt handler to match new prototype for IRQ
...
function pointers.
1997-02-04 02:23:35 +00:00
aab5efa574
Updated to use the new bus space interface code. Use a number of bus
...
space handles to describe the task file registers, aux register, 16 bit
data register and 32 bit data register.
The wdc softc structure has been moved to a separate file.
Added support for multiple attachments by separating the core of the
probe and attach functions from the mainbus probe and attach routines.
Added a new wdc flags 32_BIT so that the wd can determine 32 bit xfer
support from the wdc device.
1997-02-04 02:04:51 +00:00
a497e39048
Fix the declarations of the interrupt handlers to accept void * pointers
...
as the only argument and cast this as appropriate now that the function
pointers to the interrupt registration functions are fully prototyped.
Use <machine/conf.h> for the declarations of the device driver entry
points.
1997-01-28 04:55:15 +00:00
844495ceb6
Use machine/conf.h for prototypes for device entry points.
...
Declare the cpuioctl() cmd argument as u_long rather than int.
1997-01-28 04:36:14 +00:00
e1460d785b
Add prototypes for match and attach functions.
1997-01-28 04:08:21 +00:00
52ee4f3259
Updated to use the bus space interface. Pullup all the recent changes
...
to the ISA fd driver including the floppy formatting code.
1997-01-26 02:32:04 +00:00
dfb0662f21
Remove unused variables.
1997-01-26 02:16:44 +00:00
de7c5e2195
Implement the bus space interfaces for set multiple, set region and copy.
1997-01-26 01:49:01 +00:00
8f52c7afd4
Added prototypes for mainbusprint() and mainbusscan().
1997-01-26 01:41:01 +00:00
02e575f690
Replace the fix for the bugged revisions of the 37GT665 I/O controller
...
that was lost during the last upgrade of the driver.
1997-01-14 22:59:40 +00:00
98ecd0ea70
Updated for the new bus space implementation.
...
Merge in the latest changes from the ISA lpt device.
1997-01-13 00:46:51 +00:00
7384f7a76d
Update for the new bus space implementation.
...
Merge in the latest changes from the ISA com device.
1997-01-13 00:40:54 +00:00
4812012263
Implement a set of functions that provide the bus space mapping and
...
read/write routines for the mainbus.
1997-01-13 00:37:51 +00:00
52a7f33ad1
Updated for the new bus space implementation in bus.h
...
The mainbus bus space tag is passed in the mainbus_attach_args structure.
1997-01-13 00:35:47 +00:00
fd643704d1
Minor changes (inline -> __inline))
1997-01-06 04:47:53 +00:00
c65504baea
Lowered the FIFO trigger threshold to 4 for rather than 8.
...
Impelemented a fix for kernel locks when opening the serial post :
Revisions A->D of the SMC FDC37GT665 Peripherial controller have
a bug in the serial port that is triggered if the FIFO is enabled
while there is a byte in the rx data register resulting in the
rx ready bit being permenantly set.
1997-01-05 19:19:57 +00:00
fbfb9e1144
Device rename: `rd' => `md'
1997-01-01 23:32:41 +00:00
12b8038548
Fixed the IPL level of the interrupt handler.
1996-11-23 03:56:02 +00:00
4c515d528e
Pass the device name to identify_master_cpu().
...
Identify StrongARM CPU's with bugged STM^ instructions.
1996-11-23 03:53:48 +00:00
3c05da919c
Use the IOMD_ID macro to check the IOMD ID number rather than direct reads
...
from the IOMD.
1996-11-23 03:45:52 +00:00
37f3875ce4
Use the IOMD_ID macro to check the IOMD ID number rather than direct reads
...
from the IOMD.
1996-11-23 03:37:35 +00:00
5bbb546d40
Add missing bitmask buffer declaration. (*sigh*)
1996-11-13 06:46:12 +00:00
f3d0bd2b74
Slight stylistic tweak, to match the same changes I made in the SPARC
...
version of the fd driver.
1996-11-13 06:41:21 +00:00
ae63cbffa1
Use bitmask_snprintf().
1996-11-13 06:36:56 +00:00
68ecde0706
Added support for switch mouse reports between absolute and relative
...
positions.
1996-10-29 23:28:12 +00:00
8666e8f843
Treat MOUSEMODE_REL as an absolute value rather than as a bit flag.
...
Use sc_mode rather than mode.
1996-10-29 23:25:29 +00:00
8d9b74e953
Make sure that DMA channels 2 and 3 are setup as external for the podulebus
...
on RiscPC machines.
1996-10-29 23:22:57 +00:00
1f388af5cf
Fixed 4 compiler warnings about casts on insw() and outsw() calls.
1996-10-18 00:48:29 +00:00
31bdb14ed5
Rename recently checked in KGDB to IPKDB to resolve conflicts with older KGDB
1996-10-16 19:32:08 +00:00
535518ceed
Added support for the A7000 and more generally for ARM7500 based machines
...
that are not RC7500 boards.
Fixed vidcaudio_sw_encode() and vidcaudio_sw_decode() functions.
1996-10-15 21:33:51 +00:00
c2a3d7ad3c
Cleaned up comments.
...
Removed suspect FPA probing code, instead use the ARM FPE to probe the FPA.
Neatened up the FPE attachment code.
Recognise StrongARM class of cpu.
Updated the fpa instruction bounce handler to expect a 4th argument
when called on an undefined trap to match recent changes made to
undefined handlers.
1996-10-15 21:26:25 +00:00
46ee6bf856
Added support for the RC7500 and the lmc1982.
...
Added support for the A7000.
1996-10-15 21:20:15 +00:00
c69e8d2559
Initial commit of the lmc audio driver for the lmc1982 found on RC7500
...
motherboards.
1996-10-15 21:10:24 +00:00
e7e591d3b5
Separated out the function to place records in the mouse buffer.
...
Add acknowledgement records to the buffer following origin or bounding
box changes.
Removed prototype for strncmp().
Added support for switch mouse reports between absolute and relative
positions.
1996-10-15 21:06:51 +00:00
65b094f18f
Pull in all the recent changes made the dev/isa/com.c driver.
...
These are all the changes made between 1.81 and 1.88.
1996-10-15 21:00:55 +00:00
8f75693ba4
Get the IIC clock and data bit masks correct on RC7500 boards.
1996-10-15 20:40:31 +00:00
538cb0ef13
Recognise all ARM7500 systesm rather than just RC7500 during probing.
...
Fixed kbdpoll().
1996-10-15 19:47:04 +00:00
4b50267049
Make the device probe generic to all ARM7500 systems rather than
...
just RC7500 systems.
1996-10-15 19:37:06 +00:00
3f201e3de4
For RC7500 kernels treat drive type 0x00 the same as drive type 0x10.
1996-10-15 19:31:35 +00:00
63b78f14d6
Cleaned up rtcread().
...
Implemented rtcwrite() so that the RTC can be set via /dev/rtc?
1996-10-15 19:28:01 +00:00
583b16b82a
Added comments to interrupt return points.
1996-10-15 15:51:56 +00:00
ca36ac9ef4
backout previous kprintf change
1996-10-13 03:05:43 +00:00
60dd5ceebe
printf -> kprintf, sprintf -> ksprintf
1996-10-11 00:06:28 +00:00
b3eac79b64
tty stop functions really should return void, not int, and certainly not both.
1996-09-02 06:43:16 +00:00
2a73ef60b7
change cfprint_t type definition to take a const char *, rather than
...
a char *, because that's what was really intended, and because
if the print function modifies the string, various things could become
unhappy (so the string should _not_ be modified).
1996-08-27 21:53:46 +00:00
45bd77d893
Initial commit of a new iomd device. This device manages IOMD devices
...
for all ARM processors.
1996-08-21 19:53:21 +00:00
5abbf990f3
Change reboot(2) to take two arguments: bootopt like normal and also
...
a boot string for firmware that can do this, such as the SPARC and
the sun3 models. It is currently silently ignored on all other
hardware now, however. The MD function "boot()" has been changed to
also take a char *.
1996-08-09 10:30:23 +00:00
af576d8a9f
no need for a local implementation of SIOCGIFMTU; delete it.
...
s/ifr_metric/ifr_mtu/ where appropriate (in SIOCSIFMTU code), since
MTU data no longer (loggically) stored in ifr_metric.
1996-06-13 21:51:53 +00:00
e5aad86168
Allow the mouse interrupt to be specified in the config file. Fall
...
back on timer 1 interrupts if none is specified.
Only set up timer 1 is the driver is using timer 1 interrupts.
Don't claim the interrupt but allow them to be passed on to other
handlers.
1996-06-12 20:30:59 +00:00
7d688793a8
Claim the interrupt if it has been dealt with otherwise pass it on.
1996-06-12 20:28:29 +00:00
45842a3af6
Merged in the latest changes that have been mode to the isa lpt driver.
...
Merged in the latest plip code from the pc532 port.
1996-06-03 22:36:23 +00:00
e2391b47fd
Merged in the latest changes that have been made to the isa com driver.
1996-06-03 22:30:36 +00:00
f941f8cdb9
Fixed -Wall compiler warnings.
1996-06-03 22:20:32 +00:00
1c9f0501fc
Don't complain about a drive type of zero, just treat it as no drive
...
present.
1996-06-03 22:19:21 +00:00
08dfd04e76
Fixed the NetBSD Id string.
1996-05-20 17:09:24 +00:00
4a03434386
Increased delay time while waiting for acknowledgement following the
...
sending of a keyboard reset code. This fixes a problem on some machine
where the reset code ends is a long loop continually trying to reset the
keyboard.
1996-05-16 19:32:25 +00:00
95ee0f849a
Initial commit of the SMC91C9X ethernet driver found on RC7500
...
motherboards.
1996-05-12 21:35:07 +00:00
779d7709c5
Separated mouse initialisation code out into a separate function.
...
Added a watchdog timer to reset to reinitialise the mouse if it dies.
1996-05-07 21:04:08 +00:00
09aabb30f7
Merged in changes from the isa wd driver.
1996-05-07 21:00:09 +00:00
748810b06d
Changed struct ifnet to have a pointer to the softc of the underlying
...
device and a printable "external name" (name + unit number), thus eliminating
if_name and if_unit. Updated interface to (*if_watchdog)() and (*if_start)()
to take a struct ifnet *, rather than a unit number.
1996-05-07 00:46:37 +00:00
c41bdbf690
Added a new routine kbdcmd() to send commands to the keyboard.
...
Added a new routine kbdreset() to conduct a full keyboard reset.
Added definitions of all keyboard command codes and responces.
Replaced kbd_set_leds() with new function that used kbdcmd().
The keyboard attach function now detects whether a keyboard is
attached or not.
1996-05-06 00:35:05 +00:00
60b2501141
Updated FIQ handler registers to match changes to the floppy
...
fiq routines.
1996-05-06 00:23:57 +00:00
a6da4ae69c
Fixed compiler warnings generated with -Wall.
1996-04-26 22:01:51 +00:00
0b22968311
Initial commit of iic and rtc devices.
1996-04-19 19:49:03 +00:00
06ae03c8b0
Use the generic mouse ioctl names instead of the quadmouse ones.
1996-03-28 21:56:40 +00:00
e50a0e4440
Support the ARM7500 IOMD as well as the RPC600 IOMD.
1996-03-28 21:55:15 +00:00
910ee34995
Remove definitions of the inb() and outb() macros as they are now
...
defined in a header file.
1996-03-28 21:52:32 +00:00
ba871a93aa
Initial commit of the PS2 mouse driver.
1996-03-28 21:50:19 +00:00
c8d5b80dea
Define name for the floppy interrupt handler.
...
Fixed declartion of fdopen() now that it does not clash with fdesc open
function.
1996-03-27 22:18:44 +00:00
585c401e02
Define name for the interrupt handler.
...
Include mouse.h instead of qmouse.h now that there is a generic
interface.
1996-03-27 22:14:45 +00:00
395f0fd59c
Define name for the interrupt handler for use with vmstat -i.
1996-03-27 22:08:25 +00:00
c8d47951ba
Fix references to the match function.
1996-03-20 18:38:00 +00:00
4973a32e6d
RCS Id police.
1996-03-18 19:54:53 +00:00
5c67e5fad9
New device attachment scheme:
...
- split softc size and match/attach out from cfdriver into
a new struct cfattach.
- new "attach" directive for files.*. May specify the name of
the cfattach structure, so that devices may be easily attached
to parents with different autoconfiguration semantics.
1996-03-17 01:16:48 +00:00
46e6b251f1
Raise the spl level while modifing the keyboard autorepeat and delay
...
rates.
Added missing = to test for alphabetic characters so that caps lock
applies to Z as well as A-Y.
1996-03-13 21:51:32 +00:00
50b27325dd
Removed all the early (and now redundant) keyboard polling and interrupt
...
buffer. The new polling function for cngetc() works a lot better and
is stable.
1996-03-08 16:28:54 +00:00
b702c67c74
Pickup IRQ number from configuration file via mainbus_attach_args
...
instead being fixed in a header file.
1996-03-06 23:30:58 +00:00
e766702f7e
Fixed IOMD identification during device probing.
1996-03-06 23:26:20 +00:00
bdb7e8955c
Reformatted code to suit style guide.
...
Fixed IOMD identification during driver probing.
1996-03-06 23:24:52 +00:00
88be357d42
Fixed declaration of a debugging variable.
1996-02-22 23:03:44 +00:00
7b9c8753a7
Added #ifdef guards round the FPE initialisation calls.
1996-02-22 22:56:16 +00:00
f741f471f6
Added new routine for polling the keyboard.
1996-02-15 23:24:44 +00:00
5ef42fccf7
Removed debug printing from lpt interrupt routine.
1996-02-15 21:33:52 +00:00
0705e7dfd1
Initial commit of the NetBSD/arm32 port.
1996-01-31 23:24:54 +00:00
386ad2ff0f
Initial commit of the NetBSD/arm32 port.
1996-01-31 23:14:53 +00:00
augustss