mrg
ca5f9685bb
clean up kernel/config files files for machVM lossage.
1999-03-24 06:06:09 +00:00
mrg
d2397ac5f7
completely remove Mach VM support. all that is left is the all the
...
header files as UVM still uses (most of) these.
1999-03-24 05:50:49 +00:00
chs
ab7269f62a
if uvm_fault() fails with KERN_RESOURCE_SHORTAGE, send a SIGKILL
...
and print a message about it. this will be used to recover from
out-of-swap conditions.
1999-03-18 04:56:01 +00:00
sommerfe
bc533621ed
defopt MINIROOTSIZE
1999-03-17 18:59:21 +00:00
minoura
e518820ca8
Pullin m68k/ieee.h.
1999-03-15 11:55:53 +00:00
scw
5a1959a811
Push 'curproc' on the stack, not 'cachectl'. (I own Ignatios one brick :)
1999-02-28 16:49:04 +00:00
scottr
d32ed292af
defopt BUFCACHE and BUFPAGES.
1999-02-27 06:39:34 +00:00
is
f71d843a65
synchronize types, and s/curproc/p/ in one forgotten place
1999-02-26 22:37:57 +00:00
is
8474ed8a1e
MVME68K specific part of fix for PR 6152
1999-02-26 22:16:35 +00:00
scw
4a38a5de3a
Remove a comment of mine which no longer applies.
1999-02-21 18:10:10 +00:00
scw
6312ec9ab7
Move scsi_nosync declaration into ncrsc_pcctwo since I've permanently
...
disabled sync negotiation in the 147's SBIC driver. (I could never make
it work). Also, don't enable bus-snooping with a 68060 based board.
1999-02-21 13:59:35 +00:00
scw
dfaaa08fb4
Include the GENERIC config. file instead of VME147.
1999-02-20 17:19:41 +00:00
scw
134a854765
Add some missing targets from sys/lib/libsa.
1999-02-20 16:26:57 +00:00
scw
9a7c49a33e
Add splserial().
1999-02-20 16:24:53 +00:00
scw
f94ac542ec
Forgot to commit this one; added SCSI and VME drivers.
1999-02-20 00:44:31 +00:00
scw
42058284c1
Config file with support for both '147 and '167.
1999-02-20 00:18:49 +00:00
scw
38a327cafe
Add entries for SCSI and VME. While I'm here, bump maxusers to 16,
...
and enable a couple of other things which weren't useful in the
early days of development.
1999-02-20 00:16:38 +00:00
scw
0c1ed3ce56
Add NFS_BOOT_BOOTPARAMS option.
1999-02-20 00:13:43 +00:00
scw
4f53e52d8a
Add support for the VMEchip2 and the ncr53c710 SCSI IOP.
...
VMEchip2 support work is ongoing. SCSI is complete.
1999-02-20 00:11:59 +00:00
scw
80a6d1c537
reboot(8) is now supported, by hitting the hard reset (RST) bit in the GCSR.
...
Figure out the amount of onboard RAM by looking at the MEMC040/MEMECC
configuration register. (Bank #0 only, for now).
1999-02-15 21:05:26 +00:00
scw
a72d37c4fa
Merge support for mvme167 into main tree.
1999-02-14 17:54:27 +00:00
lukem
dcab0210a0
convert from NOxxx= to MKxxx=no.
...
include <bsd.own.mk> if testing a MKxxx variable.
1999-02-13 02:54:17 +00:00
mycroft
2a304686e6
Minor cleanup.
...
Make the initializer for BAUDLO depend on PCLK directly; it was incorrect on
some ports where PCLK is not 4.9152MHz.
XXX Is the default value actually used?
1999-02-11 15:28:03 +00:00
kleink
f69591d12d
Use of casts as lvalues is a GNU C extension; rearrange slightly.
1999-02-10 17:03:26 +00:00
mycroft
be1af660c0
Don't set DCD_IE in the frontends. KGDB doesn't even use DCD, and the tty
...
frontends get it from zsparam() anyway.
1999-02-03 20:25:05 +00:00
scw
2cbc4abc96
Make this compile again.
1999-01-31 14:06:40 +00:00
mycroft
3e6e3322d8
Format consistency.
1999-01-24 12:56:51 +00:00
mycroft
082204fa3d
Standardize format.
1999-01-22 14:12:07 +00:00
thorpej
2fb041ce0a
No need for <sys/mtio.h>
1999-01-19 18:18:41 +00:00
chuck
417e5339f0
MNN is no longer optional
1999-01-16 20:31:50 +00:00
thorpej
8922647c58
Some minor, mostly costmetic, changes to CPPFLAGS/CFLAGS.
1999-01-15 23:37:05 +00:00
thorpej
c84a74b16b
Don't define "mc68020". Nothing uses it.
1999-01-15 23:21:25 +00:00
bouyer
dc306354b0
Move the bswap functions from libutil to libc (this bups the
...
minor of libc and the major of libutil). For little-endian architectures
merge the bnswap() assembly versions with nto* and hton* using symbols
aliasing. Use symbol renaming for the bswap function in this case to avoid
namespace pollution.
Declare bswap* in machine/bswap.h, not machine/endian.h. For little-endian
machines, common code for inline macros go in machine/byte_swap.h
Sync libkern with libc.
Adjust #include in kernel sources for machine/bswap.h.
1999-01-15 13:31:15 +00:00
thorpej
e598335d1c
Garbage-collect `mbutl'.
1999-01-09 22:10:12 +00:00
augustss
fc5f9ee81d
Add -Wpointer-arith warning since `void *' arithmetic is not ANSI C.
1999-01-08 19:26:12 +00:00
itohy
36416d8500
Added options COMPAT_LINUX and EXEC_ELF32 as comments
...
to GENERIC configuration files.
1998-12-15 19:50:00 +00:00
itohy
c05dadc113
Added COMPAT_LINUX support.
1998-12-15 19:36:36 +00:00
mjacob
74bc9f26d5
Update HBAs to incorporate the new max_lun property.
1998-12-05 19:43:33 +00:00
scw
6861b95582
Get rid of memset() prototype, it's not used and egcs doesn't like it.
1998-11-23 20:45:26 +00:00
scw
28b6542336
Fix misplaced comma...
1998-11-21 20:37:06 +00:00
thorpej
5f0577babc
Adapt to the new scsipi_adapter interface.
1998-11-19 21:43:00 +00:00
mrg
db3051d720
fix problems in many d_mmap routines:
...
- returned EOPNOTSUPP rather than -1.
- no check for negative offset.
many of these fix potential security problems in these drivers.
XXX XXX XXX
the d_mmap cdev routine should be changed to have a prototype like:
paddr_t (*d_mmap) __P((dev_t, off_t, int));
by someone!
1998-11-19 15:38:20 +00:00
oster
c74d32c5fc
Updating of bdev's and cdev's to support RAIDframe.
1998-11-13 04:47:03 +00:00
thorpej
49c62c4336
Changes to support fork_kthread():
...
- cpu_set_kpc() now takes void *arg third argument, passed to the
entry point.
- cpu_fork() allows parent to be non-curproc iff parent is proc0.
When forking non-curproc, assume its state has already been saved.
- Adjust various pieces of machine-dependent code to account of all of this.
1998-11-11 06:41:23 +00:00
tron
b296275bb4
Defopt SYSVMSG, SYSVSEM and SYSVSHM.
1998-10-19 22:09:13 +00:00
itohy
2a9addf6dc
Remove unwanted reference to "_trap1" if !defined(COMPAT_13).
1998-10-18 04:42:17 +00:00
drochner
2468738337
change handling of libkern:
...
-sys/lib/libkern builds as library per default (as it was documented all
the time)
-ports able to LKM set "KERN_AS=obj" explicitely in their Makefiles
(for now; should depend on actual "option LKM" or -better- functions
included for LKM use should be pulled in by a stub)
-always link libcompat before libkern - libkern stuff can be referred to
by libcompat, but not the other way
1998-10-15 18:37:13 +00:00
chuck
8bef431273
remove unused share map code from UVM:
...
- update calls to uvm_unmap_remove/uvm_unmap (mainonly boolean arg
has been removed)
1998-10-11 23:20:59 +00:00
scw
260d2c97a9
Make 'configure()' agree with the prototype in <sys/device.h>.
...
(Returns 'void').
1998-10-10 19:46:29 +00:00
thorpej
908cdfe4e3
Add scsibus entry points to the cdevsw[].
1998-10-10 02:00:49 +00:00
thorpej
29d472f53d
Garbage-collect the open_target_lu and close_target_lu entry points from
...
struct scsipi_adapter; they were not used.
Add a scsipi_ioctl entry point to struct scsipi_adapter. This will be
used to issue ioctl commands to the host adapters.
Inspired by PR #6090 , from Matt Jacob.
1998-10-10 00:28:28 +00:00
thorpej
c01f29bdf1
Sigh, we are going to have to burn a vector for Just Sigreturn again,
...
for now, until we have a more generic {get,set}context(). Update the
comment for trap #3 accordingly.
1998-10-04 23:38:55 +00:00
thorpej
d15a64c38b
Adapt to signal changes.
1998-10-01 02:53:53 +00:00
thorpej
8b220e1148
Define SYS_compat_13_sigreturn13.
1998-10-01 00:29:51 +00:00
thorpej
bcf14a99e2
Garbage collect trap #1 and trap #2 handlers; they're moved to
...
trap_subr.s
1998-09-30 23:47:33 +00:00
thorpej
1e62485c23
If !COMPAT_13, make trap #1 produce an illegal instruction. Fix the comment
...
for trap #2 to reflect that it's the trace trap.
1998-09-30 23:13:58 +00:00
thorpej
a11e6632a8
Pull in opt_compat_netbsd.h
1998-09-30 23:01:28 +00:00
thorpej
35d282c8d5
Make sure SYS_exit and SYS___sigreturn14 are defined. Garbage collect
...
SYS_sigreturn.
1998-09-30 22:23:13 +00:00
thorpej
38084c6615
Note that trap #1 is compat_13_sigreturn, and give trap #3 to syscalls
...
which require special handling, e.g. sigreturn on m68k.
This differs from the old sigreturn trap in that we require the syscall
number to be in register d0, just like the regular syscall entry point.
This will allow sigreturn to be versioned in the future without the need
to allocate another trap vector.
1998-09-30 22:14:11 +00:00
mycroft
7b15b3b56d
Minor change.
1998-09-13 12:01:41 +00:00
thorpej
70e641047c
In cpu_coredump(), use MID_MACHINE rather than MID_* (whatever it expands
...
to).
1998-09-09 11:17:24 +00:00
thorpej
8abe0d6b1c
Adjust for the new "reaper" kernel thread: do not free the vmspace and
...
u-area in machine-dependent code. Instead, call exit2() to schedule
the reaper to free them for us, once it is safe to do so (i.e. we are
no longer running on the dead proc's vmspace and stack).
1998-09-09 00:07:48 +00:00
pk
7c5210bcab
Assign my copyrights to TNF.
1998-09-05 15:20:47 +00:00
lukem
c9db84ecc9
distclean is a synonym for cleandir
1998-09-05 15:15:14 +00:00
scw
592953d009
Fix tyop.
1998-08-22 18:11:25 +00:00
scw
a84a67440f
vm_offset -> [vp]addr_t and vm_size_t -> [vp]size_t
...
While I'm here, expunge use of 'register' storage class.
1998-08-22 10:55:33 +00:00
scw
201603f86e
Hopelessly out of date, esp. now that we follow the standard
...
installation procedure.
1998-08-16 15:39:58 +00:00
scw
445aefc354
Switch to using the common m68k stuff for a couple of things:
...
. cache control functions <m68k/cacheops.h>
. sigreturn code <m68k/m68k/sigreturn.s>
Also a few of other things found while scouting around for vm_offset_t
changes.
1998-08-16 15:33:48 +00:00
mycroft
6dc903202f
Assign my copyrights to TNF.
1998-08-15 10:10:47 +00:00
mycroft
6d3d8a1350
Make copyright notices with my name consistent.
1998-08-15 03:02:31 +00:00
scw
09502c9fb2
Fix -Werror compilation failure due to lack of a couple of 'const's.
1998-08-08 20:57:55 +00:00
scw
aec399e36f
Changes to keep lint happy.
...
In particular, fix some Makefiles so the include
paths are passed to lint.
1998-08-01 11:22:51 +00:00
thorpej
3ff8e6493a
Don't cast the null residual pointer passed to vn_rdwr().
1998-07-28 18:34:52 +00:00
drochner
49bb9d8214
adapt to LANCE driver split
1998-07-21 17:36:01 +00:00
veego
1b46ebe1d9
Add elf_machdep.h to the INCS list.
1998-07-12 17:53:29 +00:00
thorpej
639cc899cf
Basic elf_machdep.h for m68k; doesn't include relocations, yet.
1998-07-12 01:17:58 +00:00
thorpej
6fa49323d7
Put VMEbus RAM on a lower priority free list, since it's much slower (because
...
the MVME-147 doesn't cache access to any VMEbus space).
1998-07-08 04:40:28 +00:00
jonathan
011f2bda08
defopt NS, NSIP.
1998-07-05 06:49:00 +00:00
jonathan
5c0c5dd0b4
defopt ISO TPIP.
1998-07-05 04:37:35 +00:00
jonathan
8db0fcdbf7
defopt CCITT.
1998-07-05 02:12:22 +00:00
jonathan
3751946b97
defopt INET, NETATALK.
1998-07-05 00:51:04 +00:00
jonathan
466e784ee1
defopt DDB.
1998-07-04 22:18:13 +00:00
lukem
bd8d501f7e
remove options FIFO; it's now the default
1998-06-26 01:53:43 +00:00
thorpej
37b378d836
defopt COMPAT_HPUX
1998-06-25 23:56:39 +00:00
thorpej
8aee7782f5
defopt COMPAT_SUNOS
1998-06-25 23:40:33 +00:00
thorpej
971b8956ef
defopt KTRACE
1998-06-25 21:18:11 +00:00
cgd
651b44e211
Rework the way kernel include files are installed. In the new method,
...
as with user-land programs, include files are installed by each directory
in the tree that has includes to install. (This allows more flexibility
as to what gets installed, makes 'partial installs' easier, and gives us
more options as to which machines' includes get installed at any given
time.) The old SYS_INCLUDES={symlinks,copies} behaviours are _both_
still supported, though at least one bug in the 'symlinks' case is
fixed by this change. Include files can't be build before installation,
so directories that have includes as targets (e.g. dev/pci) have to move
those targets into a different Makefile.
1998-06-12 23:22:30 +00:00
cgd
87dc093422
replace ${MACHINE} with mvme68k, so that these Makefiles can safely
...
be run when MACHINE != mvme68k.
1998-06-12 23:11:45 +00:00
scw
cee1e443db
Use DEV_BSIZE in place of MAXBSIZE for the static 'iobuf' in devopen().
...
Use of the latter caused the 1st and 2nd stage boot loaders to occupy
over 64k of memory. This caused them to fail on a 4Mb mvme147 since
they are loaded at 0x3f0000.
Reported by Kristen A. McIntyre and Maxime Kurkdjian.
1998-06-11 19:04:57 +00:00
tv
00ede2160e
Change ddb_init() for a.out to provision for kernels which are not booted by
...
the current 'bootblock' method, like the Shark, which preloads and preformats
the symbol table right in the boot code.
1998-06-09 01:57:41 +00:00
thorpej
9ef6fa7387
Build pmap_boostrap.o without profiling; we can't call mcount before the
...
mmu is enabled!
1998-05-31 23:28:07 +00:00
thorpej
a7f360c6c9
Specify a non-profiling C rule.
1998-05-31 23:25:41 +00:00
is
7a0f63f982
Back out the defopt for M680?0. As pointed out to me, this breaks ports which
...
dont use the M680?0 the way Amiga, Atari, Mac68k, and X68k do. I must have
missed this in the past discussion about this project.
1998-05-24 19:32:34 +00:00
is
6a6812fd92
Move M680[2346]0 to opt_m68kcpu.h.
...
XXX Some explicit dependencies could be removed now from the individual
arch/$ARCH/conf/Makefile.$ARCH files, but this is still to be done.
1998-05-23 20:51:06 +00:00
thorpej
6626878e7b
It is no longer necessary for pmap_pinit() and pmap_release() to be
...
pmap interface functions, as NetBSD no longer uses statically allocated
pmaps (except for the kernel pmap, which is special-cased anyhow).
1998-05-19 19:00:11 +00:00
scw
cd18732d2f
Move 'pseudo-device md' from VME147 to RAMDISK, where it belongs.
...
For some reason, 'pseudo-device vnd' was missing from VME147; added.
1998-05-08 21:37:29 +00:00
kleink
aa36ad1f55
Fix some arithmetics lossage on typeless pointers.
1998-05-07 21:01:41 +00:00
thorpej
0a358dfd77
options UVM no longer needed; it's now standard
1998-05-04 05:01:11 +00:00
thorpej
fcb3331f98
Switch to UVM.
1998-05-04 05:00:12 +00:00
tv
b21bfbde11
Add -Wno-main conditional on compiler being gcc 2.8 or egcs. (This adds
...
a HAVE_GCC28 check-variable that can now be used to add other gcc-2.8
flags in cases where they may be useful, or to remove gcc 2.7.2 "bug
workaround" flags.)
1998-04-12 23:47:41 +00:00
is
ddc5b81d4f
68060 has 8k + 8k caches.
1998-03-18 22:19:40 +00:00
bouyer
9f50fca1fd
Add commented out "options FFS_EI"
1998-03-18 16:34:41 +00:00
thorpej
63dfa5e1a1
Minor cosmetic cleanup; no functional change.
1998-03-18 07:18:50 +00:00
thorpej
86d534a7d9
- Make MACHINE_NEW_NONCONTIG non-optional.
...
- Maintain two copies of the number and size of physical memory segments.
One copy, mem_clusters[], contains _all_ of physical RAM, for crash dumps.
The other copy, phys_seg_list[], starts out with all of physical RAM (and
is used to initialize mem_clusters[]), but is adjusted to be the memory
actually managed by the VM system.
- Fix computation of physmem; when support for MACHINE_NEW_NONCONTIG was
added, physmem was accidentally changed to not take into account the memory
located before the kernel, or the memory taken up by the kernel itself.
1998-03-18 07:16:10 +00:00
thorpej
02fa4134dc
- Make MACHINE_NEW_NONCONTIG non-optional.
...
- G/C some things left over from the old noncontig code.
1998-03-18 07:12:49 +00:00
thorpej
c718c9e278
- Make MACHINE_NEW_NONCONTIG non-optional.
...
- Make initialization of the message buffer a little less magic-looking.
- Maintain two copies of the number and size of physical memory segments.
One copy, mem_clusters[], contains _all_ of physical RAM, for crash dumps.
The other copy, phys_seg_list[], starts out with all of physical RAM (and
is used to initialize mem_clusters[]), but is adjusted to be the memory
actually managed by the VM system.
- Fix crash dumps with regard to multiple memory segments.
1998-03-18 07:11:22 +00:00
thorpej
c0cfbf8d7d
Make MACHINE_NEW_NONCONTIG non-optional.
1998-03-18 07:07:11 +00:00
cgd
9da165424c
allow LDSTATIC definition to be overridden by bsd.own.mk/mk.conf
1998-03-02 19:57:00 +00:00
perry
1ed8ea9966
note second parm of sysarch() is now void *, + trivial KNF, etc.
1998-02-25 21:41:55 +00:00
chuck
e308ffd825
compute st_map size properly
1998-02-24 19:01:59 +00:00
thorpej
7027d87a18
Duh! Use uvm_km_valloc_wait(), NOT uvm_km_zalloc() to allocate user page
...
tables. (Thanks for pointing that out, Chuck!)
1998-02-24 07:42:05 +00:00
scw
d38d12d85a
Whoops, cgd's pmap_map change got lost! Put it back.
1998-02-21 19:22:00 +00:00
scw
0e88177c0b
Implement changes for MACHINE_NEW_NONCONTIG and UVM.
1998-02-21 19:03:25 +00:00
thorpej
772da350d4
Disable the message buffer during crash dumps by clearing msgbufenabled,
...
not msgbufmapped.
1998-02-19 04:18:30 +00:00
cgd
3bbb7f7d45
Move pmap_map() function definition to MD headers, as appropriate. It's
...
an internal function, and the VM system shouldn't try to prototype it.
(Note that some ports _don't_ prototype it.)
1998-02-18 02:05:32 +00:00
thorpej
8354e68508
Remove "class" declarations, and add "devclass" declarations where
...
appropriate. Fix several inconsistencies between device class and
attributes. Mostly from Chris Demetriou.
1998-02-16 22:12:45 +00:00
scottr
f49dd3ef30
Avoid declaring the "astpending" and "want_resched" globals in cpu.h,
...
as this breaks C++ code that happens to indirectly include this header.
Both Matthias Scheler and I noticed this, independently.
This problem notably does not affect the atari and sun3/sun3x ports,
which have already implemented a similar solution.
1998-02-13 07:41:45 +00:00
thorpej
54aa7dfae0
Correct a think'o I made some time ago, and note that the dump routines
...
here are broken if VME memory cards exist in the system.
1998-02-08 09:33:14 +00:00
mycroft
b5c132e4d2
Prototype __flt_rounds() consistently.
1998-02-03 01:26:20 +00:00
is
b3fa451227
Amiga uses the common m68k/sig_machdep.c now. Also moved its definition from
...
the other 68k ports' files.${port} to arch/m68k/conf/files.m68k.
1998-02-01 21:23:24 +00:00
ross
3a83745247
In some hp300-derived pmaps, in pmap_page_protect(), don't walk off the
...
end of the list of physical->virtual entires into NULL space if the last
entry is (mysteriously) wired in the pmap. Add a DEBUG printf on alpha.
1998-01-31 01:32:55 +00:00
mycroft
15ae963bea
When dumping, print out the device number as major,minor.
1998-01-24 16:46:23 +00:00
thorpej
2d53e59a47
Update for changes to config.
1998-01-12 19:51:03 +00:00
perry
6f57e5c573
multiple include protect machine/limits.h, fixes pr 4473 (from Mika Nystrom)
1998-01-09 22:23:44 +00:00
thorpej
6ac24f05df
Garbage-collect VM_PMAP.
1998-01-06 08:46:11 +00:00
thorpej
2317f9064e
Garbage-collect pm_stchanged.
1998-01-06 08:40:50 +00:00
thorpej
07f835de1f
Garbage-collect PMAP_ACTIVATE() call here; it's no longer necessary.
1998-01-06 07:49:36 +00:00
thorpej
61567b54de
Garbage-collect pm_stchanged; it's not used by anything.
1998-01-06 07:02:58 +00:00
thorpej
d11b109f2b
Garbage-collect use of the PCB's copy of the user segment table pointer.
1998-01-06 06:51:40 +00:00
thorpej
a8f80ad4fd
Fix a bogosity apparently inherited from when the Utah 4.3BSD code base
...
was converted to use Mach VM for Net2/4.4BSD. The user segment table
pointer was originally stored in the PCB. When Mach VM came along,
however, it was also stored in the pmap, and loaded into the PCB in
pmap_activate(). pmap_activate() would then note that the PCB's USTP
was now in sync with the pmap's USTP, and the low-level context switch
code would use the value from the PCB.
However, pmap_activate() would also load the hardware MMU context if
the pmap was the current pmap (or, in the case where pmaps can be shared,
such as in NetBSD, if the proc was the current proc). The low-level
context switch code would then reload the hardware _again_ using the
USTP from the PCB.
However, the optimization of not calling pmap_activate() if "stchanged"
was false ended up causing some processes to use stale USTP values from
the PCB when the low-level context switch code reloaded the hardware!
This was noticed by using a real vfork(2) (which worked for some time
before failing, surprisingly!)
Since I'm hard pressed to find any real optimization here (since the
hardware was always reloaded once, sometimes twice!), the code now always
calls pmap_activate(), which uses the correct USTP value (the one in the
pmap). The PCB's USTP is now ignored, and should eventually be g/c'd.
Another optimization can actually be performed, and I have added a comment
describing what it is, but have not yet implemented it.
Also note that most of the loadustp() functions where actually incomplete.
This has been corrected. These functions should probably be split up into
MMU-specific operations, and called indirectly, rather than doing constant
run-time decision making based on values that will never change during the
course of a boot's lifetime.
1998-01-05 23:16:21 +00:00
perry
b46484bb8a
RCSID Police.
1998-01-05 20:51:25 +00:00
perry
015e898c02
RCSID Police.
1998-01-05 07:02:46 +00:00
thorpej
b9f1b716f3
Now that all ports have pmap_activate(), and it has an identical interface,
...
prototype it in <vm/pmap.h>
1998-01-03 01:12:59 +00:00
thorpej
dd966fca05
Change an argument name to PMAP_ACTIVATE() to more accurately describe the
...
semantics of the argument.
1998-01-01 20:05:23 +00:00
thorpej
287b63b321
- Make pmap_activate() and pmap_deactivate() take a struct proc *.
...
- Define active_user_pmap() and use it in the appropriate places (from hp300
port).
1998-01-01 19:52:50 +00:00
scw
3adf82c90e
Grok boot partition argument delimited by a colon. Force RB_ASKNAME
...
when partition argument is present.
1997-12-17 21:33:10 +00:00
scw
c0ba23773d
Always write primary bootstrap code to raw partition, even when the
...
secondary bootstrap is on partition >= b.
1997-12-17 21:30:23 +00:00
scw
ea634df03a
Workaround for bug in 147Bug PROM (my version, 2.2, at least) which
...
prevents booting from tape in the obvious way.
1997-12-17 21:28:02 +00:00
scw
4b78217d87
Conf file suitable for the ramdisk installation kernel.
1997-12-17 21:24:11 +00:00
scw
f7b8b2dc36
Add file-system KERNFS for the benefit of miniroot install.
1997-12-17 21:20:06 +00:00
scw
ea4e9ca4f6
Doh! 'avail_end' is a physical offset, not a page number!
1997-12-06 20:29:59 +00:00
tv
0a558b3f1f
Standardize COMPAT_SUNOS -- remove all references to
...
sunos_exec_aout_makecmds() in machdep.c for various architectures and put
it in exec_conf.c like the other emulations; rename exec.h to
sunos_exec.h.
1997-12-04 15:33:17 +00:00
kleink
c87631771e
Add COMPAT_13.
1997-12-01 14:52:51 +00:00
lukem
6c986561ee
* add commented out DDB_HISTORY_SIZE=100 if DDB exists in config file
...
* fix up use of 'options<SPACE><TAB>'
1997-11-17 01:57:23 +00:00
veego
8b485c5962
Add a missing #if NARP > 0 around arpintr(); and add a #include "arp.h"
...
for NARP. This is for the 'new' arp system.
1997-11-13 10:43:06 +00:00
thorpej
ce4c770f88
Make sure CPP, AR, AS, and RANLIB are defined.
1997-11-12 23:11:50 +00:00
thorpej
a421995756
Define LORDER, NM, and TSORT here, like we do the rest of the tools.
1997-11-12 22:25:31 +00:00
thorpej
6e1637f157
asm volatile -> __asm__ __volatile
1997-11-05 04:05:00 +00:00
mycroft
ec5fd4954e
Set rr0_dcd.
...
Don't set DCD_IE and CTS_IE here; let the MI code do it.
Handle MDMBUF.
1997-11-02 08:05:06 +00:00
scw
d0d3cc7965
Remove paragraph describing problem with initialising VMEbus RAM cards'
...
parity bits. Initialisation now handled during kernel startup.
1997-11-01 19:18:39 +00:00
scw
cb8172bce4
Chnage MACHINE_NONCONTIG implementation such that the message buffer is
...
always located at the end of onboard RAM. This allows locore.s to zero
any offboard RAM to initialise the parity bit which most VMEbus RAM cards
have. Without this, many cards buserr on the first read access.
Thanks to Herb Peyerl for the idea.
1997-11-01 17:56:47 +00:00
lukem
3e8e744696
getopt returns -1 not EOF
1997-11-01 06:49:14 +00:00
scw
6eb98e720f
Finally nobble the last MACHINE_NONCONTIG gremlins. Needed to add
...
<machine/vmparam.h> to pmap.c and locore.s. Plus, genassym.sh needed
to have USRSTACK removed due to conflict with vmparam.h
1997-10-21 19:25:08 +00:00
scw
3c1ce11613
Fix includes. (Make sure <vm/vm.h> gets pulled in before <sys/sysctl.h>)
1997-10-19 10:53:14 +00:00
christos
e42293ca28
fix chrtoblk declaration
1997-10-16 23:37:34 +00:00
explorer
80513cb5ae
o Make usage of /dev/random dependant on
...
pseudo-device rnd # /dev/random and in-kernel generator
in config files.
o Add declaration to all architectures.
o Clean up copyright message in rnd.c, rnd.h, and rndpool.c to include
that this code is derived in part from Ted Tyso's linux code.
1997-10-13 00:46:08 +00:00
thorpej
1ae5ca3411
Initialize interrupt handlers and message buffer in mvme68k_init().
1997-10-13 00:21:08 +00:00
thorpej
118885e061
Consolidate some initialization in mvme68k_init().
1997-10-13 00:19:37 +00:00
thorpej
05c4cae34d
We don't need to call isrinit() twice.
1997-10-13 00:18:28 +00:00
scw
e01a82f2a0
Describe how to configure and use VMEbus RAM cards with an MVME147 card.
1997-10-12 15:45:12 +00:00
scw
73699f5ad7
Fix bug whereby if no VMEbus RAM is defined, a MACHINE_NONCONTIG kernel
...
would fail to boot.
1997-10-12 15:41:39 +00:00
scw
01e0c4c896
Move MACHINE_NONCONTIG from std.mvme68k to <machine/vmparam.h> as per
...
Jason's request.
1997-10-12 15:39:35 +00:00
scottr
017e6c7f10
Address PR 4120 by synchronizing v{,un}mapbuf() with the i386 vm_machdep.c,
...
v 1.27, pulling in changes made there by Charles Hannum. Also, incorporate
a few tweaks made by Gordon W. Ross in the sun3 version of this change.
1997-10-11 06:38:45 +00:00
scw
2dde7e366d
Added support for VMEbus RAM cards via MACHINE_NONCONTIG.
...
The kernel should still compile and run without it, but I've
put the config option in std.mvme68k so it's built like this
as standard.
1997-10-09 21:39:16 +00:00
jtc
4229acf79d
Fix tipo inherited from old version of TNF copyright template.
1997-10-09 08:37:20 +00:00
thorpej
3b4ad2b60e
Copyright assigned to The NetBSD Foundation.
1997-10-05 18:15:51 +00:00
lukem
7d508b124f
define SIZE?=size, and use ${SIZE} instead of size. makes cross
...
compilation easier
1997-10-03 07:17:00 +00:00
christos
7f41ec0345
PR/4162: Chris Jones: make cleandir does not work properly; it does not
...
remove the object files and the .depend file in the kernel build directory.
1997-09-30 22:50:53 +00:00
scw
d2cd21c0ef
Fixed typo. in FPU_68882 entry for MVME147
1997-09-28 11:29:48 +00:00
leo
ef6f3f7e25
Move the definition of MSGBUFSIZE up to the machine-arch level if
...
possible. Pointed out by Bernd Ernesti.
1997-09-20 12:08:24 +00:00
leo
d4713d24c2
Implement the kernel part of pr-1891. This allows for a more flexible sized
...
msgbuf. Note that old 'dmesg' and 'syslogd' binaries will continue running,
though old 'dmesg' binaries will output a few bytes of junk at the start of
the buffer, and will miss a few bytes at the end of the buffer.
1997-09-19 13:52:37 +00:00
mycroft
a9155c5057
Set the status word as well, and remove a bogus comment.
1997-09-12 10:29:20 +00:00
mycroft
cba224ed23
FPCOPROC is no longer used here.
1997-09-12 09:29:13 +00:00
mycroft
4e5b47eba3
fputype is defined in locore.s now.
1997-09-12 09:27:49 +00:00
mycroft
11393fe5b9
Add and use fputype. Optimize floating point save/restore routines a bit more
...
if only one CPU type is defined. Eliminate FPCOPROC. Merge some of the
68060 floating point stuff from the x68k port.
1997-09-12 09:25:36 +00:00
mycroft
8a8fa1ee59
Eliminate some uses of FPCOPROC.
1997-09-12 08:19:00 +00:00
mycroft
1192cdbe7e
FPCOPROC is already in the Makefile; no need for it here.
1997-09-12 08:14:06 +00:00
mycroft
50cfb2fcdd
Kill vestiges of Locore.c.
1997-09-12 07:55:17 +00:00
mycroft
982f24e698
Always initialize all registers in setregs().
1997-09-12 07:00:30 +00:00
mycroft
16a8787248
Fix execve(2) and *setregs() interfaces so emulations can set registers in a
...
more correct way. (See tech-kern.)
1997-09-11 23:01:44 +00:00
bouyer
6f3bab1f59
Merge scsipi branch in the mainline. This add support for ATAPI devices
...
(currently only CD-ROM drives on i386). The sys/dev/scsipi system provides 2
busses to which devices can attach (scsibus and atapibus). This needed to
change some include files and structure names in the low level scsi drivers.
1997-08-27 11:22:52 +00:00
phil
b6a75eabb2
Add "#file-system UNION" as per PR 1032. (Should mvme68k have a
...
GENERIC conf file with "everything?")
1997-07-22 18:49:21 +00:00
drochner
bdb232d2b6
Don't use <lib/libsa/if_ether.h> anymore. This was a copy of the
...
old (before ARP changes) <netinet/if_ether.h>, intended for
temporary use.
1997-07-22 17:41:01 +00:00
kleink
50d3039914
Fix another oversight from last commit.
1997-07-20 11:03:03 +00:00
kleink
cd9e9b6a2b
Fix `return();' vs. `return;' in last commit; pointed out by Steve Woodford.
1997-07-20 10:57:32 +00:00
jtk
d36d6d14ab
use locator defines in "locators.h" to index cf_loc[]
1997-07-17 02:01:26 +00:00
leo
198bd713f2
Generate assym.h dependencies when making 'depend'.
1997-07-12 22:07:36 +00:00
perry
ad1710ce1e
update comment from 1981 on memory and disk prices -- pr-2754 from Curt Sampson
1997-07-12 16:18:36 +00:00
veego
1450ec3f1b
Restore the define of NPTEPG.
1997-07-10 08:23:03 +00:00
kleink
96914606be
From sun3:
...
Correct handling for Trap #2 in SunOS executables,
now that we know it is supposed to flush the cache.
(Was thought to be "some obscure FPU operation".)
1997-07-08 16:56:31 +00:00
mrg
71ee532c82
move man pages into share/man.
1997-06-22 06:25:58 +00:00
scw
b471de3926
Deleted m68k_round_seg and m68k_trunc_seg. They're in common m68k/param.h now.
1997-06-21 11:05:34 +00:00
mrg
552af779d2
bring mrg-vm-swap2 onto mainilne.
1997-06-12 15:46:19 +00:00
mrg
dc6a98e92c
bring mrg-vm-swap2 onto mainilne.
1997-06-12 15:09:23 +00:00
veego
6304388ee4
The 'Mach derived conversion macros' are now in <m68k/param.h>
1997-06-10 18:47:21 +00:00
veego
931d90fcee
Use the MI <m68k/param.h> include.
1997-06-10 07:54:35 +00:00
veego
a204fb7981
Initialize machine from MACHINE.
1997-06-08 23:54:19 +00:00
thorpej
6dd15693d9
Add the ipfilter device at cdev major 7.
1997-06-01 09:18:45 +00:00
cjs
7a66732d34
Back out BUILDDIR and NOINSTALL changes.
1997-05-31 21:21:13 +00:00
cjs
83498d7e88
Remove empty libinstall target and add NOINSTALL=1.
1997-05-30 13:43:06 +00:00