b4c1bfd1f3
modify load_file to load at relative vms'a as specified in the phdr's.
2000-07-13 02:35:25 +00:00
84bbae583c
remove a debugging printf.
2000-07-13 02:33:36 +00:00
ccb90e6fe9
When select(2)/poll(2) is awakened by a collision, recalculate the
...
timeout value for tsleep(). From Artur Grabowski <art@stacken.kth.se>.
2000-07-13 01:32:33 +00:00
81ce10aa1f
Extend the vmcmd stuff a bit. Add a flags field and define
...
VMCMD_BASE & VMCMD_RELATIVE. This allows one to add vmcmds
which are relative to previous entries. This is needed for
loading the VAX ld.elf_so
2000-07-13 01:24:04 +00:00
c675def443
Update comment.
2000-07-12 23:14:09 +00:00
5cae63e123
NetBSD -> __NetBSD__ in an #ifdef, and nuke sc_bpf; there's one in
...
the ifnet already.
2000-07-12 23:02:38 +00:00
1a82fc879b
Regen.
2000-07-12 22:59:54 +00:00
16a4fd2bff
Add DEC DE422 Ethernet.
2000-07-12 22:59:23 +00:00
c0708e9ff1
Clean up bios_reg a little, and add support for accessing
...
the byte variants of the registers (e.g. %ah, %al, etc.).
2000-07-12 22:58:12 +00:00
b46e691b98
make bootprog_* const (pointed by Simon Burge)
2000-07-12 22:19:57 +00:00
7e8f67ad97
No need to fetch the psycho's own registers as thet are already passed
...
down from the parent bus. Also account for the difference in `reg'
properties in psycho vs sabre chips.
2000-07-12 21:49:44 +00:00
b2a5b02fc9
Fix a couple of LP64 problems (long -> int32_t).
2000-07-12 21:15:33 +00:00
f56554a578
If there is no "interrupt-map" property on the ebus node, assume the
...
child "interrupt" properties are already in a format suitable for
the parent bus.
2000-07-12 21:07:36 +00:00
c8f528ad5e
switch to MI newvers_stand.sh version info generator
2000-07-12 21:05:35 +00:00
1204c1faaf
Oops, treat 2100A_A500 just like 2100_A500 in every place necessary.
2000-07-12 21:02:14 +00:00
aee8c6a2e9
new MI bootblock versioning helper for generating vers.c,
...
intended to replace all the various port's stand/*/newvers.sh scripts
architectures will be switched to this gradually as tested
2000-07-12 20:57:42 +00:00
3182af4432
- Add Jensen support/devices.
...
- Add commented-out Sable/Lynx support/devices.
- Switch from `ncr' to `siop' by default.
- Add some missing `scsibus' configs to INSTALL.
2000-07-12 20:54:38 +00:00
249773b538
Deal with another odd need of the Sable/Lynx systems, which need to
...
have an ISA chipset present before the PCI-EISA bridge has been
attached (because the STDIO module has an ISA DMA-using device,
the floppy controller, connected to it).
2000-07-12 20:50:00 +00:00
a66c3e663c
Code to support the DEC 2000/300 (DECpc AXP 150, a.k.a. "Jensen")
...
systems. Thanks to Gyenes Istvan for the rounds of testing.
2000-07-12 20:36:07 +00:00
55c41121ff
Change from `ncr' to `siop' by default.
2000-07-12 20:27:25 +00:00
42c89508c0
Uncomment the `fdc at sableio' lines.
2000-07-12 20:20:54 +00:00
1f45545899
Add UltraSPARC III specific flag bit. Currently ignored.
2000-07-11 21:55:11 +00:00
dc6054c8b0
add OBJCOPY?=objcopy
2000-07-11 18:47:09 +00:00
dafe13f724
callout()->callout_reset()
2000-07-11 18:46:22 +00:00
dd44125396
Remove unused variable.
2000-07-11 16:08:15 +00:00
6c4d97da13
Indicate WEP capability to association request when WEP is enabled.
...
Without this fix, some (IEEE802.11 conformant) APs will send data to this
station without using WEP.
2000-07-11 12:54:00 +00:00
f6812b853b
Only define machdep sysctls if CPU_MAXID is not defined by machine/cpu.h.
...
This lets mips ports have additional machdep sysctl. Define CPUISMIPS3
for MIPS1+MIPS2 as cpu_arch >= 3 to support mips4. Add cpu_intr()
prototype so this is defined in one place.
2000-07-11 06:34:57 +00:00
6b28794054
Add support for 3 QED special2 opcodes.
2000-07-11 06:27:58 +00:00
54a85cb3af
For 64b clean 32b compilation, do not bother setting SX And KX.
...
The current code does not maintain these in SR, and they are not
needed by 32b kernel code for mips3/4 instructions.
2000-07-11 06:26:08 +00:00
a5eeea36d4
Add back a failure return statement in check_header() which I accidently
...
deleted in rev. 1.46; pointed out by Chris Demetriou.
2000-07-11 06:23:38 +00:00
4f051180a0
- Use PMAD-BA name for device match logic. It's not a real TURBOchannel
...
device and the id string is not found in option ROM string, but
ULTRIX/OSF1 call it so anyway.
- Squash IOASIC DMA buffer allocation into device attach() sequence.
2000-07-11 04:10:25 +00:00
77e30d85bf
Oops.
2000-07-11 01:15:47 +00:00
e3c19eafd0
Update comment.
2000-07-11 01:02:44 +00:00
dcbf69bf94
Update mips3_locore_vec cache functions for mips3_L1TwoWayCache. Add cast
...
for clean compilation with _MIPS_BSD_API_LP32_64CLEAN set.
2000-07-10 23:21:16 +00:00
f7d523ebb6
make buildable with -Wall -Werror
2000-07-10 22:48:25 +00:00
b3c2dd691c
make compilable with -Wall -Werror
2000-07-10 22:01:16 +00:00
42c88111e1
explicitly specify main() return type (make buildable with
...
-Wall -Werror)
2000-07-10 21:30:31 +00:00
010c198b37
In setregs() flush sigreturn trampoline code from the d (MIPS3) and i cache.
...
Tested on geocast RM5231 platform. This fixes a race in
regress/sys/kern/sigtramp. Some other ports do the same thing.
2000-07-10 21:12:13 +00:00
27a5ba9e0a
use <sys/exec_aout.h> instead of <a.out.h> - this is supposed
...
to be standalone after all
2000-07-10 20:36:15 +00:00
7e272173bd
no need to include <a.out.h> here
2000-07-10 20:33:49 +00:00
f10d7699fc
Break into debugger by typing `+++++',
2000-07-10 20:24:23 +00:00
b71bddab49
Regen.
2000-07-10 16:32:07 +00:00
e8ebb2a377
use mips3 cache op.
...
invalidate -> write-back invalidate
(although NetBSD/hpcmips run on write-through mode.)
suggested by cgd.
2000-07-10 16:23:18 +00:00
5a5452c95d
Add ICP Vortex RAID controllers.
2000-07-10 16:14:02 +00:00
b99e56173c
do not allow non-priviledged user to change nwid via ifconfig.
2000-07-10 14:36:17 +00:00
0de5b6e260
these don't need <uvm/uvm_extern.h> at all, actually.
2000-07-10 13:54:54 +00:00
5b2b68bb7a
fix a cast for sparc64.
2000-07-10 13:37:00 +00:00
c2ed037f55
move associated/synced/no-recent-beacons messages to IFF_DEBUG.
2000-07-10 12:32:53 +00:00
c71d0f69c6
Forgot a debug printf.
2000-07-10 10:45:21 +00:00
5ae755e1bf
Save registers for eventually later usage.
...
Use REI to clear pipes after code copy.
2000-07-10 10:42:27 +00:00
matt