veego
b1dc6a8603
s/_trunc_page/m68k_trunc_page/
1997-06-10 19:36:53 +00:00
veego
05b8948c41
Define NBSG from (1 << SEGSHIFT) and move some variables before
...
<m68k/param.h>.
1997-06-10 19:32:15 +00:00
veego
931d90fcee
Use the MI <m68k/param.h> include.
1997-06-10 07:54:35 +00:00
veego
a204fb7981
Initialize machine from MACHINE.
1997-06-08 23:54:19 +00:00
cjs
7a66732d34
Back out BUILDDIR and NOINSTALL changes.
1997-05-31 21:21:13 +00:00
cjs
83498d7e88
Remove empty libinstall target and add NOINSTALL=1.
1997-05-30 13:43:06 +00:00
jeremy
3f6f86d875
Undo changes which make pmap_xxxx_page() functions re-entrant; just block
...
all interrupts which might cause re-entrancy.
Allow virtual addresses which are not managed by the MI VM system to
participate in the PV system.
Remove a few frivoulous TLB cache flushes.
1997-05-30 07:02:14 +00:00
jeremy
4502541573
When turning off the drive motor, de-select the drive so the busy light
...
extinguishes.
1997-05-30 03:23:11 +00:00
gwr
e512003d6e
Add non-inline version of _splraise.
1997-05-29 22:20:01 +00:00
gwr
2e7b1f13dd
Define getsr() as _getsr() for backward compatibility.
1997-05-29 22:18:24 +00:00
gwr
56e5d1c7c5
Add inline definitions for _getsr() and _splraise(), and
...
define splimp() using splraise so early calls to the VM
code (and pmap) do not accidently enable interrupts.
1997-05-29 22:17:38 +00:00
jeremy
1b2aae80c2
Added new lock system for the two virtual pages used in temporary mappings.
...
Allows pmap_zero_page() and pmap_copy_page() to be re-entrant.
1997-05-28 04:28:52 +00:00
jeremy
b53e0d4fb7
Coded to work with new lock system for tmp_vpages.
1997-05-28 04:27:00 +00:00
jeremy
89aa743138
Config file for a RAMDISK kernel.
1997-05-27 01:06:33 +00:00
jeremy
42012469ef
Document that tapeboot has been tested and works.
1997-05-26 03:44:42 +00:00
jeremy
fc60f1979e
Prevent RAM disk hooks from compiling until sun3 md_root.c can support
...
ram disk images that are read in from the outside.
Sync with some old local changes.
1997-05-24 00:09:49 +00:00
jeremy
0304ff6aed
Implement code to dynamically size the number of page tables based on available
...
RAM at boot.
Also did some cleanup of unused functions, updated several comments, and
removed unecessary 'XXX's.
1997-05-20 06:01:19 +00:00
jeremy
f7e146ad7f
Return EIO instead of EFAULT when read/write is too big or small.
1997-05-16 05:47:14 +00:00
jeremy
608a6800e6
Things are stable enough that DDB, PMAP_DEBUG and DIAGNOSTIC aren't needed
...
anymore.
1997-05-15 01:49:27 +00:00
gwr
a83cf310c1
The Hydra is 20 MHz and the Pegasus is 33 MHz.
1997-05-14 16:45:22 +00:00
gwr
5079510304
Make the "hydra" call leds_hydra() from clock_attach().
1997-05-14 16:42:45 +00:00
gwr
e6fa5bc33d
Add leds_hydra().
1997-05-14 16:37:01 +00:00
gwr
b209530013
Remove call to leds_init (it is already in obio_init).
1997-05-14 16:13:31 +00:00
jeremy
ebb856e274
Long awaited MI/MD separation completed.
1997-05-14 01:37:23 +00:00
gwr
1aa91b893d
Eliminate references to vmspace.vm_pmap
...
(also fix some comments).
1997-05-13 17:17:12 +00:00
jeremy
1c454cc472
Diagnostic LED on 3/80 appears to be active-high, not active-low as previously
...
thought. It remains to be seen if this is true for the 3/470.
1997-05-11 06:16:26 +00:00
jeremy
3d8d0c485c
Add call to leds_init() after everything has started up ok.
1997-05-11 06:15:09 +00:00
mycroft
185b24dd5b
Use libinstall::, not install:, to prevent instaling LIB.
1997-05-07 16:20:26 +00:00
lukem
6fe4889b92
cleanup use of whitespace
1997-05-07 02:20:26 +00:00
jeremy
3f7423a432
Wrap all label references with new macros in m68k/asm.h in preperation
...
for ELF switchover. (eventually)
1997-05-02 23:07:35 +00:00
gwr
24af362f60
Implement pmap_pa_exists() so that /dev/mem works.
...
This was the reason ps (kvm_getargs) did not work.
1997-05-01 15:00:11 +00:00
gwr
b9a0ca59bb
oops...
1997-05-01 14:58:20 +00:00
gwr
887d5be03e
Forgot to import this. (Thanks, der Mouse)
1997-05-01 14:57:17 +00:00
gwr
42f8cf900b
Use unsigned when doing copy/xor check.
1997-04-28 23:43:56 +00:00
gwr
cb96a536e4
Add a comment about obio_mapin().
1997-04-28 23:38:47 +00:00
gwr
1046c915b6
Drivers that use obio_mapin should enforce OBIO attachment
...
(just to be paranoid).
1997-04-28 23:30:19 +00:00
gwr
92efd222d0
Hack for now: if fpu is there, report it as an mc68882.
1997-04-25 19:16:10 +00:00
gwr
dfc2e0f30d
Add devices: idprom, oclock. Add file leds.c.
1997-04-25 19:12:57 +00:00
gwr
1676e3a212
Add idprom, oclock, and rearrange somewhat.
1997-04-25 19:11:48 +00:00
gwr
cd6ee4737e
Renamed obio_alloc/obio_mapin.
1997-04-25 19:02:46 +00:00
gwr
678f326c7f
Make idprom_init() figure out where the IDPROM resides.
...
Add autoconfig glue, which currently just shows the
address where the IDPROM was found.
1997-04-25 19:02:06 +00:00
gwr
49f095a342
No longer need eeprom_init().
1997-04-25 18:57:49 +00:00
gwr
e2ca51d2a1
Fixed OBIO locators bug, so this can do the normal thing now.
...
Also improved handling of spurious interrupts, and sync up with
the sparc version.
1997-04-25 18:55:05 +00:00
gwr
4c64781365
Moved the actual model identification work into identifycpu(),
...
which used to be in _startup.c:_verify_hardware().
Use sunmon_abort() in cpu_reboot() for now...
1997-04-25 18:52:11 +00:00
gwr
9ae1b69554
Rename "Idle" to "_Idle" so clock.c can reference it.
1997-04-25 18:48:39 +00:00
gwr
25d7b6b348
Provide a struct representing only the clock.
1997-04-25 18:47:41 +00:00
gwr
885a1fc439
Add /dev/leds support.
1997-04-25 18:46:10 +00:00
gwr
2dd63e3378
Use bus_mapin, and minor tweaks.
1997-04-25 18:45:39 +00:00
gwr
f7749f47fe
Add "oclock" support for the Sun3/470.
1997-04-25 18:31:37 +00:00
gwr
8f9276c727
Move the _verify_hardware() work into machdep.c:identifycpu().
...
Call obio_init() after _vm_init() so we can use peek_byte() to
probe the idprom. Be quiet in _save_symtab() when all is well.
1997-04-25 18:29:58 +00:00
gwr
477a320277
Moved bus_scan() and bus_print() here from autoconf.c
...
because they are now different in sun3 vs sun3x.
1997-04-25 18:02:47 +00:00
gwr
3619a4da3d
Rename obio_alloc to obio_mapin, update *_init declarations.
...
Remove OBIO_P4_REG (not a fixed address, but per-device).
1997-04-25 18:00:49 +00:00
gwr
fd42058232
Add kernel function declarations.
1997-04-25 17:52:54 +00:00
gwr
23f821bcc5
Add idprom_init().
1997-04-25 17:42:34 +00:00
gwr
963c410824
Change the OBIO address probe order a little, to allow determination of
...
which kind of idprom and clock we have (3/80 vs 3/470 differences).
Fix a bug where obio_submatch() failed to copy some locators.
Rename obio_alloc to obio_mapin. Add lots of comments.
1997-04-25 15:35:27 +00:00
gwr
20ac88e4b1
Add /dev/leds support for the 3/470.
1997-04-25 15:15:45 +00:00
thorpej
48fa8154e7
Adjust for <m68k/m68k/trap_subr.s>
1997-04-25 01:49:05 +00:00
thorpej
f05b58b229
Use common m68k sigcode.
1997-04-13 02:37:15 +00:00
gwr
dcc94a5dd9
Document the flags accepted by the esp driver.
1997-04-12 19:48:00 +00:00
thorpej
a2be180b39
Adjust for new kcore.h
1997-04-09 21:00:35 +00:00
thorpej
00c04fe742
Use <m68k/m68k/proc_subr.s>
1997-04-09 20:58:33 +00:00
thorpej
a32e01eedb
regdump() is prototyped in m68k/cpu.h now
1997-04-09 20:56:46 +00:00
thorpej
28177dbb17
Pull in <m68k/kcore.h>
1997-04-09 20:55:47 +00:00
thorpej
6a4790ef0a
Remove redundant file directives
1997-04-09 20:54:41 +00:00
jeremy
fa9f5b2448
Constants for the p4 register.
1997-04-09 04:50:43 +00:00
jeremy
3c962bb544
First working version.
1997-04-09 04:49:09 +00:00
jeremy
5efd258691
Add p4 register pointer to softc struct.
1997-04-09 04:47:13 +00:00
jeremy
085494c2d9
Add location of P4 register. Maybe this should go in obmem.h?
1997-04-09 04:46:11 +00:00
jeremy
d4285e0617
Add needed support for P4 register. Works with X now.
1997-04-09 04:43:52 +00:00
jeremy
b7dd41d4e2
Location of printer port registers for 3/80 was off.
1997-04-09 04:42:25 +00:00
jeremy
ee8819cf64
Obio and obmem busses now support devices with vectored interrupts. Needed
...
for floppy driver.
Made comments about soon-to-be introduced parallel port driver more specific.
1997-04-09 04:38:49 +00:00
jeremy
60d41bb34e
Add floppy controller and floppy drive. Also add MS-DOS filesystem for
...
use with floppies. Remove 'SYMTAB_SPACE' now that we have our own
bootloader.
1997-04-09 04:36:56 +00:00
gwr
b5f838ad77
Add a comment.
1997-04-04 20:48:59 +00:00
gwr
0faac5faf2
Back-out the CWD hack...
1997-04-01 23:11:28 +00:00
jeremy
68755b199e
Physical page status functions pmap_clear_reference()
...
and pmap_clear_modify() weren't testing if the page whose status was being
changed was being managed. This caused kernel panics with X11.
1997-04-01 02:15:33 +00:00
gwr
a09110f073
Use <m68k/pcb.h>
1997-03-31 21:35:39 +00:00
jeremy
b572daa4dc
In-tree GNU ``as'' does not know of 'pmove <reg>,tt0' instruction. Changed
...
instances of this instruction to hardcoded opcode statements. Thanks to
jthorpe for pointing this out.
1997-03-31 02:22:25 +00:00
thorpej
80631ee3b7
Keep the compile/ directory in the distribution.
1997-03-31 01:23:37 +00:00
thorpej
2268a2c7eb
Don't allocate mclrefcnt[]; it's dead and gone.
1997-03-27 21:01:52 +00:00
gwr
c29412f1bb
fix a warning
1997-03-26 23:27:12 +00:00
gwr
37b247edde
Renames: /dumpconf/cpu_dumpconf/, /boot/cpu_reboot/
1997-03-26 22:42:13 +00:00
gwr
c304845074
Arrange to make pp.h needed by conf.c
...
(printer port driver is on the way).
1997-03-26 17:26:48 +00:00
gwr
90a79f75fe
Change continue to break in a few places (as suggested by mycroft).
1997-03-24 23:49:39 +00:00
gwr
7c0bd080c9
No longer force boothowto=RB_SINGLE|RB_KDB
...
(Yes, it goes multi-user just fine! 8^)
1997-03-24 17:57:12 +00:00
gwr
8ac50ae86b
Sync with sun3 (no longer need -DSUN_BOOTPARAMS)
1997-03-24 17:55:40 +00:00
gwr
8bec95da2c
Use ${INSTALL} ...
1997-03-24 17:48:19 +00:00
gwr
199246e95f
No longer need SYMTAB_SPACE now that sun3x/stand/* works.
...
(Thanks, Jeremy!)
1997-03-24 17:39:04 +00:00
gwr
b72b9f00ea
Use "if_ether.h" (from sys/lib/libsa).
1997-03-24 17:32:21 +00:00
gwr
c874276d35
First cut at crashdump support.
1997-03-21 22:46:05 +00:00
gwr
00ae7b5b2a
Oh well... use our own version of this.
1997-03-21 18:57:54 +00:00
jeremy
4d949455d4
Fixed address for bwtwo framebuffer.
1997-03-21 07:28:36 +00:00
jeremy
4882df57ff
Change location of if_ether.h to net/ from netinet/.
1997-03-20 21:21:00 +00:00
gwr
c3f299a527
Now using dev/ic/ncr53c9x.c
1997-03-20 16:01:36 +00:00
gwr
c921c9b954
This needs muli-include protection now.
1997-03-20 15:56:44 +00:00
gwr
4663c4fa2a
Sync with the sun3 version.
1997-03-18 23:49:07 +00:00
gwr
63176de160
Moved eeprom_uio to machdep.h
1997-03-18 23:39:20 +00:00
gwr
03c1c9cee0
Fixup dependencies
1997-03-17 20:59:47 +00:00
gwr
08f7a407f9
Separate bcopy and copypage stuff from copy.s
1997-03-17 19:46:36 +00:00
gwr
d531b1ed42
s/fpu_type/fputype/g
1997-03-17 19:03:11 +00:00
thorpej
1d987a161b
#include <net/if_media.h>
1997-03-17 03:17:34 +00:00