thorpej
ac2360fb09
- Improve the comments that describe the various clone chips.
...
- Add some more Macronix register bits.
- Define the Lite-On/Macronix 82C115 ``PNIC II'' registers.
- Add the ADMtek AL981 PHY register bits.
1999-09-30 17:41:39 +00:00
ad
19bd684e8a
- Remove a couple of items from the TODO list.
...
- Add a debug check to dpt_poll() (CCB must have CCB_PRIVATE set).
1999-09-30 17:15:54 +00:00
soren
1d04441597
Remove outdated list of density codes. mt(1) has helpful
...
hints and the SCSI specification has the real, current list.
1999-09-30 12:12:41 +00:00
thorpej
61e04b2510
Add link-up/link-down detection for the Macronix NWay block.
1999-09-30 00:07:29 +00:00
thorpej
9d911ccd55
Add some optional stats gathering, and fix tx stats counting; use the last
...
descriptor in the packet, not the first.
1999-09-29 23:11:36 +00:00
thorpej
be9104dd8d
Define ANAR and ANLPAR bits that are used to negotiate the 802.3x PAUSE
...
feature.
1999-09-29 22:49:33 +00:00
thorpej
56fb88a64a
Grumble, yet another chip-designers-and-manual-writers-disagree. Deal with
...
this by frobbing the 10TCTL register minimally, toggling only the bit we
care about (and hoping that link-capability advertisement happens correctly).
MX98715 can talk to the network now.
1999-09-29 22:07:47 +00:00
ad
122919c087
Install dptreg.h, dptvar.h.
1999-09-29 20:46:41 +00:00
ad
2bb59077e8
EISA frontend for DPT driver (as yet untested).
1999-09-29 20:38:51 +00:00
thorpej
e3398d3647
- Get a little closer on the Macronix chips. Still some more work to do.
...
- Add some basic support for the ADMtek AL981 clone (which, unfortunately,
I can't test until my sample boards arrive).
1999-09-29 18:52:19 +00:00
thorpej
bbd3e72fbc
- Add register definitions for the ADMtek AL981.
...
- Add a comment about the Macronix MX98713 -- it's almost exactly like
a 21140A, and doens't have the Nway registers that the other Macronix
chips have.
1999-09-29 18:50:39 +00:00
ad
f866a1af51
Regen.
1999-09-29 17:45:22 +00:00
ad
2abb3cfff1
- Add vendors: DPT, NEC, AT&T
...
- Add products: DPT, NEC and AT&T EATA SCSI adapters
1999-09-29 17:40:18 +00:00
ad
f6e42db75a
- Move initial reset code into dpt_readcfg()
...
- Bus specific front-end is now responsible for reading EATA configuration
- EATA configuration data is now saved in the softc
- Make synchronous writes work properly
- Don't ignore HBA timeouts in dpt_cmd()
- Prefix eata_cfg's members with `ec_', not `dc_'
1999-09-29 17:33:02 +00:00
ad
51de3bc208
PCDISPLAY_SOFTCURSOR: remember state of cursor during full screen scroll.
1999-09-29 17:29:24 +00:00
ad
e2bdb5f380
PCDISPLAY_SOFTCURSOR: invert foreground too.
1999-09-29 17:26:06 +00:00
thorpej
1cb047331b
Regen.
1999-09-29 00:20:25 +00:00
thorpej
33f02f24b7
- Add Sundance Technolgy vendor ID.
...
- Add Sundance Technolgy ST201 10/100 Ethernet product ID.
- Add D-Link DFE-550TX product ID (uses ST201 chip).
1999-09-29 00:19:51 +00:00
thorpej
e2504d1efc
Regen.
1999-09-29 00:07:51 +00:00
thorpej
8f22cca8ea
Add adaptec AIC-6915 10/100 Ethernet.
1999-09-29 00:07:15 +00:00
ad
9876b8900e
- Fix some comments.
...
- Synchronous writes musn't linger in the HBA's cache.
1999-09-28 23:39:14 +00:00
ad
7064961321
- Add some profiling gunk.
...
- Add CCB_SYNC for CCBs where data must be written synchronously by the HBA.
1999-09-28 23:35:29 +00:00
thorpej
f134ebc280
Sync the ASCII Ethernet address decoder with mhzc.c. New version by
...
Chuck Cranor is more efficient and fixes a bug which would have caused
data corruption in some cases.
1999-09-28 23:20:42 +00:00
thorpej
df12499646
Add code to take a device out of Power-Down state if it's in such a state,
...
and attempt to attach Macronix chips.
1999-09-28 23:12:23 +00:00
thorpej
619bd37d4d
Fix a slight buglet in `enable' magic odering, point out by
...
Chuck Cranor.
1999-09-28 22:46:43 +00:00
thorpej
0bd09380a2
Oops, Macronix MX98713A doesn't have GPIO direction bits in the SROM
...
because it doesn't have a GPIO port (CSR12 is the `10baseT status'
register on this chip revision).
1999-09-28 21:56:45 +00:00
thorpej
b5a2d37e04
Add a driver for the Megahertz Ethernet/Modem combo cards, e.g. XJEM3336.
...
This supplies an attachment of the `sm' and `com' drivers.
Thanks to Chuck Cranor for sifting through the Linux smc91c92_cs.c driver
to find the magic sequence that brings the Ethernet portion of the card
on-line!
1999-09-28 17:58:55 +00:00
thorpej
9103e43937
Don't handle the Megaherz XJEM3336 here.
1999-09-28 17:57:03 +00:00
thorpej
cca601b9b2
Make sure the Revision register contains the correct magic number.
...
From Chuck Cranor.
1999-09-28 17:55:33 +00:00
enami
ee587c6c18
s/#define /#define<TAB>/.
1999-09-28 15:10:20 +00:00
kleink
bb54953b63
Since the Audio 1 DMA controller implements the 24 low address bits only,
...
add the gross hack originally implemented by Charles Hannum in the SonicVibes
driver to force allocation of DMA memory for that channel through the Scatter-
Gather Map to get an address range that fits in.
The eso driver now works on Alphas except for DWLPX-based systems, whose owners
are not likely to desire audio or likely can afford slightly less cheap audio
hardware. :-)
1999-09-28 13:57:45 +00:00
ad
21a6ff6082
- Wait up to 2 seconds for HBA ready before executing CP_PIO_GETCFG
...
- Remove some unneeded memset() calls and assignments
- Fix comment on dpt_done_ccb()
1999-09-28 09:18:00 +00:00
ad
f653cce944
Regen.
1999-09-27 23:46:56 +00:00
ad
94367db635
s@SmartCache/Raid@SmartCache/SmartRAID@
1999-09-27 23:45:57 +00:00
ad
a289fc5023
Add glue for 'dpt' driver.
1999-09-27 23:44:27 +00:00
ad
48a0b6237a
A driver for DPT EATA SCSI adapters. dpt.c contains a brief TODO list.
1999-09-27 23:41:47 +00:00
enami
bb03434a5f
Support Planex Communications Inc, FNW-3600-T.
1999-09-27 23:19:12 +00:00
enami
488eb98613
Regen. (btw, this typo was pointed out by kawamoto@es.osaka-u.ac.jp).
1999-09-27 22:58:56 +00:00
enami
f419b27fb3
Oops, s/FMW/FNW/g.
1999-09-27 22:57:26 +00:00
thorpej
a5649fe4d5
Initial support for 21140[A] GPR media.
1999-09-27 19:14:01 +00:00
thorpej
848d8b7080
Add a media name pointer to the tulip_2114x_media structure, and define
...
a table for converting SROM media block type codes to ifmedia subtypes.
1999-09-27 19:03:59 +00:00
thorpej
1f0fa59202
- Define more "selected connection type" bits for the ISV SROM.
...
- Define ISV SROM bits for 21140[A] GPR media.
- Define a bitmask which includes media-related bits in the OPMODE
register.
1999-09-27 19:02:50 +00:00
enami
f449bb216c
Change NE2000_USE_WORD to take pointer to softc rather than type.
1999-09-27 05:25:44 +00:00
enami
56a3e3e340
Minor cleanup; use the cached result instead of evaluating the
...
macro NE2000_USE_WORD twice.
1999-09-27 04:52:19 +00:00
enami
60acf2e610
Regen.
1999-09-27 04:28:27 +00:00
enami
f095a1088a
Add entry for Planex Communications Inc. FMW-3600-T.
1999-09-27 04:27:28 +00:00
enami
7fcb2b605a
Define new macro NE2000_USE_WORD() and use it where appropriate.
1999-09-27 04:14:06 +00:00
enami
9bcfc916b0
Allow caller to specify the type of NE2000.
1999-09-27 04:07:24 +00:00
cgd
6146ed7db8
add classes/subclasses new in PCI 2.2. Needs a bit of cleanup, but then,
...
so does everything involving configuration space headers and if i don't
get this out of my source tree i'll go insane.
1999-09-27 03:20:47 +00:00
mrg
5bffe1b3b5
regen
1999-09-26 09:20:04 +00:00