augustss
90daa4736b
Comment out the GET_DEVICE_ID code, because for some unknown reason it
...
causes printing to fail sometimes.
1999-09-10 19:28:26 +00:00
itojun
f5e553eb57
IPv6 support.
...
ETHERTYPE_IPV6 packets are encapsulated by RFC1042 encap.
Tested with Japanese card, with WaveLan bridge (wiconfig -p 1).
NOTE: I dunno if encapsulating IPv6 packets by RFC1042 is the correct way,
as RFC1042 only defines behavior for ETHERTYPE_{IP,ARP,REVARP} packets.
Since WaveLan bridge encapsulates IPv6 packets with RFC1042, we have no
choice.
Gather joined multicast addresses via SIOCADDMULTI, and configure multicast
filter properly. This is also required for IPv6 support
(which heavily depends on multicast).
Fix IFF_RUNNING management
- to prevent IFF_RUNNING from raised on "wiconfig", before "ifconfig up"
- to prevent the driver from occupying extra interrupts on "ifconfig up",
then "down", then "up".
1999-09-10 00:30:59 +00:00
itojun
ebcd1b7a41
Make sure to behave as IFF_SIMPLEX in all cases.
...
Drop multicast/broadcast packet looped back from myself.
This is to cope with SMC91C92 (Megahertz XJ10BT), which
loops back multicast packet to itself on promiscuous mode.
(should be ensured by chipset configuration)
Reviewed by: thorpej
1999-09-10 00:23:34 +00:00
thorpej
d622281820
Rework the changer driver a bit:
...
- Take note of magazine changes, and enqueue "Element Status Changed" events
that user processes can read or select on.
- Normalize some structure names.
- Report back more status about changer elements:
* Volume tags (e.g. barcode labels on the backs of your tapes)
* External device names (for drive units in a changer)
* Last element a unit of media was moved from
* Sense information for SCSI changer elements in EXCEPT condition
* Vendor-specific data if the user requests it.
- Add support for setting volume tags.
1999-09-09 23:24:11 +00:00
tron
b9627d002f
Add support for Cyclade boards with new Risc II serial controller.
...
Patches supplies by C Kane in PR kern/7175.
1999-09-09 21:52:11 +00:00
thorpej
057798e505
Snapshot of work-in-progress to support the internal NWay block on
...
the Lite-On PNIC chips. Not finished yet; some other infrastructure
work left to do.
1999-09-09 21:48:18 +00:00
hwr
31292f422e
Add a quirk for Wangtec SCSI-36 (QIC-120) tape drive.
...
From Izumi Tsutsiu in PR 8357.
1999-09-09 20:06:52 +00:00
is
125de40b64
Ambicom support by Vincent Aymeric
1999-09-09 18:12:05 +00:00
is
a0cbbf08fe
Ambicom support by Vincent Aymeric
1999-09-09 18:09:10 +00:00
augustss
6b9aae738e
Update doc URLs and fix a typo in umass_bulk_get_max_lun().
1999-09-09 17:12:03 +00:00
augustss
9bebdb616f
Remove some and add some.
1999-09-09 13:05:05 +00:00
augustss
8c655e84f2
An EXPERIMENTAL audio driver. It still needs work, e.g., in the mixer
...
part to give reasonable names to the mixer controls.
1999-09-09 12:28:25 +00:00
augustss
2aadcb5f47
Change the internal API to allow DMA buffers to be pre-allocated by
...
the device driver instead of happening automagically in the HC driver.
This affects both the HC-USBD interface as well as the USBD-device
interface.
This change will allow DMA buffers to be reused e.g. in isochronous
traffic.
Add isochronous support to the UHCI driver (not for OHCI yet).
1999-09-09 12:26:43 +00:00
augustss
a85a08c2fb
Add support for detaching audio devices.
1999-09-09 10:24:39 +00:00
is
4efecd1291
The nca.c probe routine falsely claims i82595tx chips to itself.
...
Move it to after the iy driver.
1999-09-09 09:54:08 +00:00
nisimura
633408472b
Use bus_dmamap_load() to obtain 128KB chunk for LANCE merging codes from
...
NetBSD/alpha. Tested ok with DEC3000 and DECstation.
1999-09-09 06:33:38 +00:00
thorpej
a10045109d
Add chip types for several more Tulip clones (ASIX, ADMtex, PNIC II, Davicom),
...
and match the Compex RL100-ATX; it uses the Winbond 89C840F (RL100-TX is
a Macronix 98713).
1999-09-08 22:29:46 +00:00
thorpej
e0c4f8ff92
Regen.
1999-09-08 22:25:56 +00:00
thorpej
dfdd1affb4
Add some more Tulip clones.
1999-09-08 22:25:19 +00:00
thorpej
ab08b6b863
Update for Lite-On product ID change.
1999-09-08 21:42:44 +00:00
thorpej
ab7310ed6e
Regen.
1999-09-08 21:39:54 +00:00
thorpej
9bb30be866
Add Davicom Semiconductor vendor ID, and Davicom DM9102 10/100 Etherent
...
product ID (Yet Another Tulip Clone).
1999-09-08 21:39:24 +00:00
thorpej
187510560e
Regen.
1999-09-08 21:34:33 +00:00
thorpej
46e11c9fd8
LITEON_PNIC -> LITEON_82C168
1999-09-08 21:33:59 +00:00
oster
fe5b29ca42
Nuke unused prototype.
1999-09-08 02:01:55 +00:00
mjacob
6913f83874
A useful discussion with Jason convinced me that I had selected the
...
wrong tag as the default tag to use- we should use ORDERED, no SIMPLE.
1999-09-07 22:54:45 +00:00
soren
60feba0646
Spacing.
1999-09-07 21:52:06 +00:00
soren
cc8ca41376
Install *reg.h
1999-09-07 21:51:49 +00:00
soren
211476aea7
Match 1460 names with Adaptec.
1999-09-07 19:30:10 +00:00
soren
5c44dfbe6a
Note 78Q2121.
1999-09-07 19:29:52 +00:00
augustss
977c927d44
Do a brain dump of items to do.
1999-09-07 14:58:12 +00:00
soren
a4b7a96e0e
Do not complain in sbfind() if another driver has mapped the registers.
1999-09-07 00:49:41 +00:00
rh
12bad24883
Add opl at wss for isapnp devices w/o MAD chip.
1999-09-06 18:31:45 +00:00
augustss
6e6d511cf0
Add USUBCLASS_MIDISTREAM definition, per request from MAEKAWA Masahide
...
<bishop@rr.iij4u.or.jp>.
1999-09-06 17:16:47 +00:00
rh
ff962e992b
Add mode 3 support for newer CS423X chips. Modify probe to correctly
...
distinguish between CS4236, CS4236B, and CS4237B.
1999-09-06 17:07:04 +00:00
augustss
2425433ff6
Change some printf to DPRINTF for consistency. From Nick Hibma, FreeBSD.
1999-09-05 21:22:38 +00:00
augustss
24251055bc
Change the way the `struct device' base part of all driver softc are
...
declared and accessed to make it more portable. Idea from Nick Hibma, FreeBSD.
No functional changes.
1999-09-05 19:32:18 +00:00
oster
83abb87d9a
Garbage collect more unused stuff.
1999-09-05 03:05:55 +00:00
oster
9c01870db1
Remove more unused stuff.
1999-09-05 02:54:09 +00:00
oster
cfbdda8843
Garbage collect some more stuff.
1999-09-05 02:24:58 +00:00
oster
6158faa69d
Cleanup a bit more.
1999-09-05 01:58:11 +00:00
oster
e57673d0d4
Remove one of the two bzero calls in RF_Calloc -- the 2nd one doesn't
...
buy us anything at all.
1999-09-05 01:46:35 +00:00
soren
57f7d3320b
Add driver for the TDK Semiconductor 78Q2120 PHY.
1999-09-05 01:26:02 +00:00
soren
e0bcd7a71a
TDK Semiconductor 78Q2120 PHY, commonly used in low-power Cardbus cards.
1999-09-05 00:48:01 +00:00
soren
b8e941e9b0
Add PHY driver the the Intel 82553 found on some fxp's.
...
Some variants of this chip need a little extra MII fix before
being usable, so this is not yet put into GENERIC's.
1999-09-05 00:40:27 +00:00
soren
0151ffe3d6
Regenerate.
1999-09-04 23:59:32 +00:00
soren
6624cc41e9
Add Intel 82553 and TSC 78Q2120.
1999-09-04 23:58:55 +00:00
augustss
f3421bec94
Change the way the direction is extracted from the endpoint descriptor.
...
No functional changes to the drivers. From Nick Hibma, FreeBSD.
1999-09-04 22:26:11 +00:00
augustss
e1766aacfa
Make sure not to use the io handle before it's been initialized.
1999-09-04 22:00:32 +00:00
oster
d8144e5848
More cleanup of unused stuff. This time we nuke a bunch of memory
...
allocation stuff.
1999-09-04 21:11:21 +00:00
oster
cfd861fcd8
Minor cleanup of (now) unneeded RF_UTILITY checks.
1999-09-04 16:26:30 +00:00
simonb
56a01be374
Fix tyop in a comment.
1999-09-04 09:41:15 +00:00
thorpej
6a2319b969
Byte swap the EEPROM words on the PNIC. From Stephen Ma.
1999-09-03 00:24:56 +00:00
thorpej
8386184524
Deal with some more Winbond differences, after a more-thorough-than-before
...
reading of its manual.
1999-09-02 23:25:28 +00:00
ross
533b6088cd
Make it compile.
1999-09-02 23:23:03 +00:00
augustss
d7a4829d27
Regen.
1999-09-02 22:07:43 +00:00
augustss
1fed6ca851
Add Logitech QuickCam.
1999-09-02 22:07:29 +00:00
augustss
ba551e0c6a
Regen.
1999-09-02 19:17:57 +00:00
augustss
f6ae3ac6a9
Add some Entrega and Belkin serial adapters.
1999-09-02 19:13:43 +00:00
augustss
60179e2a13
Avoid null reference, from Nick Hibma, FreeBSD.
1999-09-02 18:13:50 +00:00
augustss
46fd81350a
Rewrite interrupt routine from clarity. From Nick Hibma, FreeBSD.
1999-09-02 18:11:41 +00:00
kleink
9c10799ac4
Use the approximated sampling rate to compute the filter rate.
1999-09-02 17:26:15 +00:00
fvdl
5c875f66d0
Select the right transceiver type when configuring the driver. Change the
...
timing for the mii code a bit. From Robert Elz / the FreeBSD xl driver.
1999-09-01 21:03:02 +00:00
thorpej
cfbc8a82fb
Make Tulip-style filter setup interrupt-driven.
1999-09-01 20:56:15 +00:00
fvdl
a6aa19699f
Don't assume that an -FX card has MII (because it doesn't).
1999-09-01 20:26:43 +00:00
thorpej
e75ce8c0df
Don't attempt to do transmit threshold tuning on the Lite-On PNCI; just
...
put it in Store-and-Forward mode right from the get-go. This eliminates
the DMA underrun errors that prevented the receive filter setup from working
and caused smashed packets to go out onto the wire.
My NetGear FA310-TX board now works.
There are still "filter setup failed to complete" messages, however they
don't appear to indicate that the filter setup actually failed, since
unicast and multicast packet reception work fine. I will address this
problem shortly.
Reading the log for the FreeBSD `pn' driver suggests that these chips are,
in fact, pretty crappy, riddled with hardware bugs (for which more workarounds
are coming).
1999-09-01 20:11:19 +00:00
kleink
480e8a1a1c
No longer requires mpuvar.h.
1999-09-01 18:03:10 +00:00
bouyer
ce80d27933
Don't try to unmap unmapped space in case of failure in
...
pciide_mapregs_compat(). From OpenBSD.
1999-09-01 15:17:07 +00:00
drochner
7c34574b94
add "ti" - Alteon Gigabit Ethernet
1999-09-01 11:54:32 +00:00
drochner
45e5d743af
quick 'n dirty port of FreeBSD's Alteon Gigabit Ethernet driver.
...
todo:
-IPv6
-clean up jumbo buffer allocation - NetBSD provides an opaque argument
to the free function, thus doesn't need the hack done here
-deal correctly with the mapping of the shared memory
1999-09-01 11:47:46 +00:00
drochner
7eaa4e57fd
regen
1999-09-01 11:42:32 +00:00
drochner
7c2d8bc001
-add some incarnations of the Alteon gigabit Ethernet adapter
...
-sort some entries which were put in by legasthenics
1999-09-01 11:40:42 +00:00
kleink
e5d76dce61
Don't make a human-readable device description being printed at attach time
...
depend on PCIVERBOSE.
1999-09-01 07:32:31 +00:00
thorpej
5d7f25011b
Some of the Tulip clone chips (like the Winbond and ASIX) want the
...
IC bit set in the *first* descriptor of the outgoing packet. Appease
them.
1999-09-01 05:07:03 +00:00
thorpej
e293024ffa
This is the long-awaited "new Tulip driver", a complete, from-scratch
...
rewrite of the driver for the DECchip 21x4x Ethernet chips, and a variety
of clones.
Currently, the driver supports the Winbond 89C840F (this works pretty
well), and the Lite-On PNIC (e.g. NetGear PCI boards), however Lite-On
support may be broken [I may simply have a busted test board].
Eventually, support for the Macronix and ASIX chips will filter into
this driver, and then, slowly, support for the genuine DEC chips,
and maybe even the DE-425 EISA model.
1999-09-01 00:32:41 +00:00
ad
78d4510ba0
Pass color value through ri->ri_devcmap before writing.
1999-08-31 10:11:52 +00:00
bouyer
7c1c212662
If we are using UDMA mode > 2 and get a DMA error, downgrade to UDMA mode 2
...
first: maybe we incorrectly guessed the cable type.
1999-08-30 12:58:58 +00:00
bouyer
8e49b58de0
Add support for Intel 810 chipset (ICH/ICH0).
...
While I'm there merge back piix_channel_map into piix_chip_map.
1999-08-30 12:49:21 +00:00
thorpej
dea48ccdf9
Oops, back out stuff I didn't mean to commit.
1999-08-30 01:05:08 +00:00
thorpej
a138de1eb5
Add detach goo; still needs work in the `scsibus' and further layers.
1999-08-30 01:04:31 +00:00
augustss
7a3bd0ab27
Add some missing request codes.
1999-08-29 22:45:41 +00:00
thorpej
dd611fa302
Set openings to 1; only one command may be queued with the device at
...
a time.
1999-08-29 20:41:12 +00:00
thorpej
54f6a91c01
Issue a Get Max Lun request to determine the max lun.
1999-08-29 19:58:55 +00:00
thorpej
04cd1cc8ee
Make usbd_errstr() always return a useful error message; it's not like
...
the strings are that big.
1999-08-29 19:41:27 +00:00
thorpej
d1088a5081
One more TODO item; sub-classes other than SCSI.
1999-08-29 18:58:03 +00:00
thorpej
59e86c6637
Correct typo in URL. From Bill Sommerfeld.
1999-08-29 18:57:15 +00:00
thorpej
f88e157ddb
Update the match routine to reflect that the driver actually matches
...
"Mass Storage/SCSI/Bulk".
1999-08-29 18:56:24 +00:00
thorpej
e01cef341e
Update documentation references.
1999-08-29 18:13:26 +00:00
thorpej
f91881f24a
Since we poll around the `done' member of a usbd_request, make it volatile.
1999-08-29 17:57:25 +00:00
thorpej
cbd1c08a2c
Note a few TODO items.
1999-08-29 17:34:11 +00:00
bouyer
52068f73ce
Add support for the Promise Ultra/33 and /66 pci IDE controller. In addition to
...
chip-dependant code this required the following changes:
- Instead of attaching the device in a generic way with some chip-dependant
routines, use a chip-dependant attach routine with some common code
factored out. The code is marginally bigger, but this allows the CMD64x
flag hack to go away.
- For chips that report per-channel 'irq triggered', test this before calling
wdcintr() for the native-pci irq case (compat intr can't be shared),
as wdcintr() has no good way to know if a irq was for it or not, and
ends up with irq loss. XXX for chips that don't have this feature irq sharing
will not work properly !
- add my copyrigth notice (could have been done some time ago I think :)
There are still some issues to be solved with the Promise controller and
ATAPI devices.
Many thanks to Paul Newhouse for shipping me 2 Ultra/33 boards for doing this
work.
1999-08-29 17:20:10 +00:00
bouyer
4819ee1cf1
Add definitions of the DMA mode control registers. They should be used
...
by pciide, but I have yet to find how to map them.
1999-08-29 17:06:43 +00:00
thorpej
246ab7936d
One item off this list done!
1999-08-29 16:53:04 +00:00
thorpej
cbb4401dfd
Port the FreeBSD `umass' driver to NetBSD. This is still a work-in-progress
...
since a few things don't yet work properly:
- Sense data isn't reported properly (err, at all).
- It doesn't work with anything other than the Iomega USB Zip drive.
- Hot-unplug doesn't work yet.
...but this is enough to make my shiny new USB Zip drive go.
1999-08-29 00:30:08 +00:00
thorpej
61f3c9356e
If scsipi_make_xs() fails, make sure to flag the buffer as error'd,
...
if provided, and biodone() it. Callers of scsipi_command() expect
this to be done.
1999-08-28 22:28:35 +00:00
augustss
036a9c6974
Change some 'struct device' to 'bdevice'. From FreeBSD.
1999-08-28 21:42:35 +00:00
augustss
1aa63c9fab
Add some comments.
1999-08-28 10:04:01 +00:00
augustss
103e304a84
Add to the growing list.
1999-08-28 10:03:38 +00:00
augustss
2126f7df24
Change a type name.
1999-08-28 10:01:59 +00:00
augustss
598999e482
Fix from FreeBSD.
1999-08-28 10:01:42 +00:00
augustss
e470b13e28
Regen.
1999-08-28 10:01:19 +00:00
augustss
4b398d8f1b
Fixes/updates from FreeBSD.
1999-08-28 10:00:56 +00:00
augustss
64c7328230
Regen.
1999-08-28 09:22:58 +00:00
augustss
d0fbee34df
Add a bunch of i810 devices. From Paul Shupak <paul@plectere.com>.
1999-08-28 09:18:08 +00:00
thorpej
299c0b1d83
Regen.
1999-08-27 23:27:39 +00:00
thorpej
e1b0108ce6
Add Samsung Semiconductor KS8920 10/100 Ethernet.
1999-08-27 23:25:36 +00:00
is
d8c7407afe
Factor out arc_storelladdr(), and use that instead of arc_ifattach() in
...
the bah_reset() function.
This makes the last change work without deconnecting all the other interfaces
from the interface list.
1999-08-27 19:23:19 +00:00
thorpej
456af6d558
Reduce the number of transmit fragments to 16.
1999-08-27 19:21:32 +00:00
thorpej
513feda9ab
- Include the RXE (receive error) interrupt in the interrupt enable mask,
...
and consider it to be like an RCC (receive copy complete). The RCC
code path has always checked for bad received packets.
- Trim the CRC length off the recived packet length; the EPIC/100 always
includes the CRC in the packet.
- Improve fatal error reporting.
1999-08-27 19:13:00 +00:00
thorpej
43c0128089
Small consistency nit.
1999-08-26 22:44:29 +00:00
thorpej
f2a165de01
Make monochrome attribte allocation a bit more obvious.
1999-08-26 21:48:11 +00:00
thorpej
f0629e4b90
Change the way the default foreground and background colors are chosen:
...
require the front-end to initialize rc_deffgcolor and rc_defbgcolor (both
new members), and override these only if RASTERCONSOLE_{FG,BG}COL are
set in the kernel configuration file.
1999-08-26 20:48:09 +00:00
is
8679b79192
Only use ifp->if_addrlen after initializing it.\
...
Problem detected by Andreas Johansson.
1999-08-26 20:44:50 +00:00
hannken
f04bd56be1
Make `sc_ops->sdo_flush' synchronous. The flags `SDF_FLUSHING' and
...
`SDF_DIRTY' were never reset because `sddone' doesn't get called from
synchronous scsi commands.
1999-08-26 09:28:17 +00:00
mrg
387650fb8b
do not install these headers. they are large (~1.8M) and useless to userland.
1999-08-26 07:58:58 +00:00
nisimura
94073f1fd9
One more ioctl() fix. Most of WSDISPLAYIO_xxx were never been called when
...
no wsmux device is installed.
1999-08-26 06:37:42 +00:00
oster
b1615831d2
Nuke some unused code which, were it enabled, might be useful for
...
performance measurement, but which would cause data corruption.
1999-08-26 02:40:27 +00:00
augustss
65845c9e2a
Regen.
1999-08-25 23:23:33 +00:00
augustss
7529455612
Add a PS2 to Mac USB Adapter from P.I. Eng.
1999-08-25 23:23:17 +00:00
thorpej
90b9deda72
When padding short packets on transmit, don't include the CRC length
...
in the computation. kern/8194.
1999-08-25 22:41:42 +00:00
augustss
6516d0b239
Fix an ioctl() problem. From nisimura@itc.aist-nara.ac.jp (Toru Nishimura).
1999-08-25 21:05:21 +00:00
augustss
e0e1fbbe36
Regen.
1999-08-25 20:34:56 +00:00
bouyer
d6c3ef56b4
Guard pool_get()/pool_put() with splbio()/splx(). Fix kern/8245.
1999-08-25 17:08:20 +00:00
augustss
02a79dc13e
Add Multitech MT5634ZBA. From FreeBSD.
1999-08-25 16:28:12 +00:00
ad
9a61ce5bff
When clearing the entire display, point to the start of the framebuffer,
...
not start of console output. Also, do not advance by ri_delta every row.
1999-08-25 08:45:25 +00:00
nisimura
de9efb01d3
- Fix an error in cursor image manipulation. I learned a pair of Bt431
...
were populated in reverse order from PMAG-A MX ...
1999-08-25 07:56:22 +00:00
nisimura
0bdb76e5cf
- 24bit per pixel TX framebuffer occupies 0x600000.
1999-08-25 02:02:22 +00:00
ross
3844ce8324
Spelling.
1999-08-25 00:59:08 +00:00
soren
aa550d38fb
Regenerate.
1999-08-24 21:32:25 +00:00
soren
fa181849a2
Add Intel i740.
1999-08-24 21:32:04 +00:00
soren
205c3f5a73
Regenerate.
1999-08-24 21:25:52 +00:00
soren
82cb092b79
Fix typo in comment.
1999-08-24 21:25:22 +00:00
tron
766b5fef17
Regen.
1999-08-24 17:48:31 +00:00
tron
7a80808434
Add Allied Telesis LA-PCM (NE2000 compatible) and Contec C-NET(PC)C
...
(MB8696x based) pcmcia ethernet cards. Patches supplied by
Kawamoto Yosihisa in PR kern/8260 and kern/8261.
1999-08-24 17:47:44 +00:00
rh
5cfe8783f9
Regen.
1999-08-24 12:47:20 +00:00
rh
416c42cc34
Add AdLib MSC 32 Wave PnP board (wss audio device).
1999-08-24 12:46:55 +00:00
ad
7f2b1ba8f2
- Change the semantics of rasops_init slightly
...
- Re-name rasops_setfont to rasops_reconfig
- Add some new run-time 'features'
- Bring all run-time 'features' under control of rasops_info::ri_flg
- Some cosmetic changes
1999-08-24 11:07:31 +00:00
augustss
1f2661798f
Make sure to mark the device as dying already in the (de)activate routine.
...
This avoids access to it before the detach routine has blown it away.
1999-08-23 22:55:14 +00:00
augustss
007da22e55
At attach time, get and print (parts of) the IEEE 1284 device id.
1999-08-23 22:35:19 +00:00
augustss
70020635c3
Regen.
1999-08-23 16:54:13 +00:00
augustss
c206e4ab37
Add a Kawatsu mouse.
1999-08-23 16:53:32 +00:00
pk
65cfdf2877
Disable inclusion of debugging code by default.
...
Turn compile-time flag I82586_DEBUG into a boolean switch.
1999-08-23 12:12:42 +00:00
pk
9fceb1947d
Do not report "spurious interrupts"; this is a relic of the PC-only
...
days of this driver.
1999-08-23 12:00:11 +00:00
augustss
592de98a19
Remove some unneeded needs-flag.
1999-08-23 07:07:47 +00:00
augustss
4c217fdaf8
Merge the soft_{td,ed} with the real {td,ed}. This saves time and space.
...
(And fix typo in corresponding uhci change.)
1999-08-22 23:41:00 +00:00
augustss
cc8b61583c
Merge the soft_{td,qh} with the real {td,qh}. This saves time and space.
1999-08-22 23:19:56 +00:00
augustss
be7e2fac07
More things to do...
1999-08-22 22:24:25 +00:00
augustss
1de0531d8b
Simplify ulptwrite() by calling usbd_bulk_transfer(). This also makes
...
it interruptible.
1999-08-22 22:22:43 +00:00
augustss
f747201099
Move more of the transfer completion processing to HC independent code.
...
Fix some problems with transfer abort & timeout.
1999-08-22 20:12:39 +00:00
augustss
5d8adfb5a2
Disable interrupts early.
1999-08-21 21:35:36 +00:00
augustss
a293a6cc73
Make sure not to call tsleep() from suspend/resume routine.
1999-08-20 16:42:38 +00:00
mouse
1705bbe96b
Get rid of ugly vertical bars which occurred when
...
character-cell boundaries != byte boundaries.
("width" (despite the poor name) should be computed based on the
*old* value of bg, not the *new* one.)
Fixes PR 8221.
1999-08-20 06:46:44 +00:00
sommerfeld
be5fe633b8
clean up attach messages slightly.
1999-08-20 03:36:59 +00:00
mjacob
f28eb7f5cc
make alpha compiler happy
1999-08-19 21:29:04 +00:00
augustss
0f99933822
Use the right type for the size argument when calling usbd_bulk_transfer().
1999-08-19 19:57:21 +00:00
augustss
a9563e089b
A first stab at making the UHCI driver endian independent.
...
(It doesn't seem to be quite working yet.)
1999-08-19 19:52:38 +00:00
augustss
c0f0486836
Add a utility function, usbd_errstr(), to print error strings. From FreeBSD.
1999-08-19 19:51:36 +00:00
augustss
462e2614ff
Add some mass storage definitions.
1999-08-19 19:50:42 +00:00
ad
afb0c7b853
Make this compile. Patch from Simon Burge.
1999-08-19 11:20:34 +00:00
tron
f625e72668
Regen.
1999-08-19 08:06:50 +00:00
tron
93f86e5ed5
Recognize a 3Com 3c509 Combo configured in EISA mode. Fixes PR kern/8234
...
by Thomas Pfaff.
1999-08-19 08:06:31 +00:00
matt
fd59bba7cb
after bus_dmamem creating some memory, zero it out. This has stopped
...
my alpha from getting COMMAND FAILED on random boots.
1999-08-19 00:43:45 +00:00
augustss
bf35d2940c
Add some more items.
1999-08-19 00:31:40 +00:00
augustss
1107c3f6ea
Back out last change. The ugliness of the Audio Class should not have
...
to pollute the general USB definitions.
1999-08-18 07:55:19 +00:00
augustss
7fb139742d
Update the endpoint descriptor struct with the two oddball entries
...
that only the Audio Class has.
1999-08-18 07:45:56 +00:00
augustss
54adf47f36
Redo the UHCI data toggle handling.
...
Make sure data toggles get synchronized on open and
when clearing an endpoint stall.
1999-08-17 20:59:04 +00:00
drochner
a47874ac23
correct a comment
1999-08-17 16:15:05 +00:00
augustss
3016e1ebe0
Make some small changes to make it compile on OpenBSD.
1999-08-17 16:06:20 +00:00
drochner
f61d8fd937
regen
1999-08-17 09:42:14 +00:00
drochner
c8aabedc83
-mention a location where the old PCI database can still be found
...
-add Alteon Gigabit Ethernet
1999-08-17 09:40:25 +00:00
thorpej
e71ad5a0ac
The CCB already contains its DMA address, so no need to recompute it
...
over and over.
1999-08-17 02:09:47 +00:00
augustss
24f66ce158
Get rid of FreeBSD code; there was so little to share in this driver
...
that it should be split.
1999-08-16 23:36:25 +00:00
augustss
f7c5edea20
Mention mux # when ignoring it for the console.
1999-08-16 23:22:22 +00:00
mcr
03946f957a
Added Solidum Systems PCI vendor ID and Device IDs
1999-08-16 21:36:39 +00:00
augustss
9a0281ff87
Some new ioctl()s for the umodem driver.
1999-08-16 20:27:55 +00:00
augustss
aa7264892d
Implement a modem driver for the Abstract Control Model, i.e. AT commands.
...
It is accessible through the usual tty abstraction.
XXX The driver needs better error handling and a special call device.
XXX It also needs more testing.
1999-08-16 20:26:53 +00:00
augustss
290c03447b
Change the way transfers are dequeued so thet we know that they
...
are removed from the queue before being deallocated.
1999-08-16 20:24:33 +00:00
augustss
23fa3682af
Remove some, add some.
1999-08-16 20:21:09 +00:00
augustss
72b1f5a4b0
Add more CDC definitions.
1999-08-16 20:20:19 +00:00
augustss
7e4e93390d
Change DIAGNOSTIC behaviour a little.
1999-08-16 20:19:55 +00:00
augustss
df65083b45
A small roadmap of the USB files.
1999-08-16 20:18:07 +00:00
thorpej
a01d72e890
Fix several LP64 problems, and clear up kernel pointer vs. physical
...
address confusion. This driver now works on the Alpha.
1999-08-16 02:01:11 +00:00
oster
770de7bb5a
Print a error message instead of panicing in rf_RecoveryPQFunc().
1999-08-15 03:44:46 +00:00
oster
d516e7b571
Make these compile with RF_INCLUDE_RAID6.
1999-08-15 02:36:40 +00:00
oster
ff6d7dd494
Cleanup a bit.
1999-08-15 02:36:03 +00:00
oster
07cc4855f1
Minor cleanup. No functional changes.
1999-08-14 23:34:18 +00:00
kleink
48f055e09b
Add missing MPU interrupt glue.
1999-08-14 22:42:16 +00:00
oster
4ba14d22b0
Fix an 'off-by-one' error in a RF_ASSERT which meant that a reconstruct
...
would panic in the case where the stripe width was 1 block.
1999-08-14 21:44:24 +00:00
augustss
19570e813c
Implement opl at wss.
1999-08-14 21:19:29 +00:00
kleink
7b34e008a9
Forgot to initialize a pointer; from Simon Burge.
1999-08-14 15:05:02 +00:00
augustss
b8b1e35ece
Some changes from FreeBSD (no functional differences).
1999-08-14 14:49:31 +00:00
augustss
23906f1d41
defopt COMPAT_14
1999-08-14 14:40:08 +00:00
drochner
7317aa4924
make it report the correct ISA port range
1999-08-14 14:32:12 +00:00
tron
b6c7adba38
Regen.
1999-08-14 13:43:27 +00:00
tron
3622436247
Add support for 3Com 3CXEM556B-INT as suggested by Noriyuki KOIZUMI in
...
PR kern/8188.
1999-08-14 13:43:02 +00:00
simonb
6b7eee9252
Initialise "error" in wsmux_detach_sc() before testing if it set.
1999-08-14 11:40:31 +00:00
hwr
4882320d4b
Initialize error variable. Should fix spurious init errors.
...
From Dave Huang in PR 8205.
1999-08-14 11:23:39 +00:00
hwr
af827a1284
Remove dulicate "Ethernet" output. From Dave Huang in PR 8206
1999-08-14 11:09:18 +00:00
augustss
b23490d39f
Implement timeout and abort of requests.
...
Compute length of short transfers correctly.
1999-08-14 08:56:09 +00:00
oster
740b9848cc
Decrease the number of outstanding IO's threashold slightly.
...
The previous value may have been too high in some instances.
1999-08-14 03:47:07 +00:00