LOADADDR(previous_section) + (ADDR(current_section) - ADDR(previous_section))
to avoid using SIZEOF(), which does not properly take into account
the size of orphans that might be sorted with the section.
- to identify device instance, using hardware address.
- when console accesses device, using statically mapped address.
- when tty accesses device, using handler given by bus_space_map().
no need device ixpcom in evbarm/conf/files.evbarm move it to
arm/ixp12x0/files.ixp12x0
ixp12x0_com.c:
some fix around address handling
1. Do not call bus_space_map() in ixpcominit(). Calling bus_space_map()
is not safe here, because bus_space_map() calls uvm_km_valloc() but
uvm is not yet initialized.
2. Use dv_unit to determine console instead comparering iobase.
Now you can attach ixpcom0 with physical address like this:
ixpcom* at ixpsip? addr 0x90000000 size 0x4000
Statically mapped address (0xf0000000) is still usable.
ixp12x0_clk:
1. access PLL_CFG register via bus_space
2. Make the delay() working correctly. (bug fix)
3. Start the timer device without interrupt on attach time.
Now delay() called before cpu_initclocks() works fine.
ixp12x0_pci:
1.Mapping PCI type0/1 configuration space to the upper address.
2."PCI I/O Cycle Access" mapping to same virtual address(VA==PA)
but size of this mapping increase to 1MByte because fails
cause couldnt set L2 table.
3.use bus_space address handling in ixp12x0_pci.c.
and development board, based around their BECC companion chip. Despite
its name, the board can run in big- or little-endian mode (we currently
run only in the latter).
cd ${KERNSRCDIR}/${KERNARCHDIR}/compile && ${PRINTOBJDIR}
This is far simpler than the previous system, and more robust with
objdirs built via BSDOBJDIR.
The previous method of finding KERNOBJDIR when using BSDOBJDIR by
referencing _SRC_TOP_OBJ_ from another directory was extremely
fragile due to the depth first tree walk by <bsd.subdir.mk>, and
the caching of _SRC_TOP_OBJ_ (with MAKEOVERRIDES) which would be
empty on the *first* pass to create fresh objdirs.
This change requires adding sys/arch/*/compile/Makefile to create
the objdir in that directory, and descending into arch/*/compile
from arch/*/Makefile. Remove the now-unnecessary .keep_me files
whilst here.
Per lengthy discussion with Andrew Brown.
* Define an ARM_INTR_IMPL option, which specifies a header file
describing the interrupt implementation for the platform. Use
this instead of the list of EVBARM_BOARDTYPE checks.
* Make the s3c2xx0 interrupt dispatch code a bit more generic, and move
it to a generic location so that other platforms can use it.
This eliminates all uses of the EVBARM_BOARDTYPE stuff, so delete it.
