d21f86df37
Initialize the ioasic slot probe table for the 3MIN (Decstation 5k/1xx)
...
and MAXINE (Decstation 5k/xx), instead of setting them to NULL.
New-config kernels should work on those machines now.
Rename the definition of the struct cfdriver for the IO ASIC from "asiccd"
to "ioasiccd", as the config-file name changed from "asic" to "ioasic".
1995-08-18 10:15:09 +00:00
8ff2cc97a0
Rename "asic" to "ioasic", to be compatible with "machine-independent"
...
turbochannel/asic device drivers. (also comment out tt.c.)
1995-08-18 10:09:20 +00:00
c591ca4056
Merge back fixes from the merged Decstation/Alpha driver.
...
Remove all references to #ifdef SPARSE, and use #ifdef alpha instead.
Only initialize ASIC dma on a machine with an ASIC.
1995-08-17 22:28:27 +00:00
66dcd8fd69
Add entries for the ccd.
1995-08-17 17:40:42 +00:00
647f483937
Remove turbochannel slot_hand_fill functions and all references
...
to them.
1995-08-17 09:27:18 +00:00
2c6601a704
Remove lint in the intializer of the table used to glue new-config
...
drivers and the old-config PMAX-specific scsi drivers.
1995-08-17 06:54:56 +00:00
af645f49fb
Make splimp() > spltty().
1995-08-13 00:29:03 +00:00
fa13d32c41
Add splsoftnet().
1995-08-13 00:16:08 +00:00
21bd4f21f6
Use splimp(), not splnet(), for now.
1995-08-13 00:07:17 +00:00
6a43b6e3a1
Re-port the Alpha versino of NetBSD's machine-independent LANCE driver
...
back to the DECstation. Boots on 3MAX and 3MAXPLUS. The bug-fixes
applied to this driver since it forked off the Decstation code also
seem to fix long-standing DMA problems with the Decstation SCSI driver.
1995-08-11 02:12:56 +00:00
37e46e6b64
clockattach() wasn't printing a newline; add it.
1995-08-10 10:50:58 +00:00
69f95bd2bb
Use "lance" as the name of the PMAX (kn01) Lance device, not "le", since
...
"lance" is what the Alpha drivers use.
1995-08-10 10:49:46 +00:00
0822ab0fe1
Map from NetBSD/Alpha names for machine-dependent functions (e.g.,
...
"force this pending write to complete") to the names used in NetBSD/pmax.
1995-08-10 05:29:11 +00:00
b42e35d645
Un-comment dependency on file cpu.c, since cpu.c has been commited to CVS.
1995-08-10 05:22:26 +00:00
0b4c870908
Change DEcstation autoconfiguration to use new-style config.
...
All devices except SCSI disks and tapes are found using new config only.
SCSI disks and tapes are configured using a table edited from an ioconf.c
produced by config.old.
Boots multi-user on PMAX, 3MAX and 3MAXPLUS. The old-style "slot hand fill"
functions for those machines, and the old TurboChannel configuration
main loop, have been removed.
Since new-style config runs later in boot than the old pmax turbochannel
probing, we no longer know what devices will be configured when consinit()
is called. Use PROM output until autoconfig is finished.
1995-08-10 05:17:07 +00:00
bc6e09fad6
Remove extraneous debugging printf()s when running on processors
...
this code has been tested on.
1995-08-10 04:31:46 +00:00
a1a7750426
Move IO ASIC interrupt-enable outside #ifdef DEBUG, where it had
...
accidentally snuck in. Clean up debugging messages and explicitly
give a warning on CPUs the code hasn't been tested on.
1995-08-10 04:30:41 +00:00
e3b5a34826
Update DECstation Lance ethernet driver to use new-style config.
1995-08-10 04:27:43 +00:00
88b9b7eb4a
Update DECstation drivers to use new-style config, removing
...
old-style config support, except for SCSI disks and tapes.
1995-08-10 04:21:35 +00:00
96f7ad7c6e
Add missing "priority" field value in KN02 "asic" configuration entry for
...
the Dallas-compatible real-time clock. The missing entry caused the offset
to end up in the "priority" field. New-style config now boots cleanly on a
KN02 (3MAX).
1995-08-09 01:21:43 +00:00
19e02269b2
New-style config (config.new) autoconfiguration code for Decstation
...
turhsturbochannel machines. Lifted wholesale from cgd's Alpha
turbochannel code, with changes that reflect the slightly different
bus topology and `slot' numbering on Decstations.
1995-08-07 07:07:43 +00:00
28c5634912
Add dk_establish() and bounds_check_with_label(), from the alpha port, for
...
the machine-independent SCSI driver. Untested.
Only print diagnostics about reading Ultrix labels when DIAGNOSTIC is defined.
1995-08-04 02:34:24 +00:00
c4f9523535
Fix cut-and-paste error in device order (clock).
1995-08-04 01:47:37 +00:00
4e33c9f0dc
Snapshot of a prototuype for a new-config GENERIC configuration.
...
This relies on an ugly mixture of new-style config and old-style config.
1995-08-04 01:24:39 +00:00
d55e0dddac
Restructure configure(): move turbochannel-device configuration
...
into a separate function for readability. Rework interrupt initialization,
so interrupts are never enabled until configuration has found and
attached all devices. Call spl0() just before probing the scsi bus,
as the DECstation scsi code can't poll, and hangs if interrupts
are disabled.
Add preliminary support for new config, protected by #ifdef NEWCONF/#endif.
Cosmetic changes to swapconf() and setroot() to reduce distance
from Alpha versions of same.
1995-08-04 01:14:17 +00:00
43f316f423
Declarations for new-config autoconfigure, based on NetBSD/Alpha.
1995-08-04 00:34:15 +00:00
1bacfdc2dd
Add preliminary support for new-style configuration: struct cfdriver,
...
and match and attach code. Still use the static softc so that drivers
work with kernels configured with either new or old config.
1995-08-04 00:26:35 +00:00
d7bb0a516f
Add header files with prototyped declarations of the serial-chip hooks
...
used by old-style pmax console configuration.
1995-08-04 00:22:02 +00:00
f7b8418b54
Add a prototype for (tc_enable_interrupt)().
1995-08-04 00:16:01 +00:00
be23617ea0
Commit ghastly change that supports select on framebuffers, since
...
the pr on that hasn't been closed yet.
Fix broken initialization of swap_dev.
1995-08-02 19:36:45 +00:00
c715dd10fe
Only print diagnostic messages about interrupt enable when DIAGNOSTIC
...
is defined.
1995-08-02 07:19:37 +00:00
4542ca9870
Commit old changes from my source tree in preparation for newconfig:
...
only print diagnostic messages about interrrupt enabling when DIAGNOSTIC
is defined.
Remove old buggy 4.4BSD turbochannel interrupt kludge for ioasic machines
inside "#if 0"/"#endif" as the NetBSD code has been working fine for months.
1995-08-02 06:44:54 +00:00
9b50b450f7
Add DS_3MAXPLUS (kn03) to switch statements for redirecting input
...
to and from SCC devices. (The 3MIN was supported but not the 3MAXPLUS).
1995-08-01 23:15:26 +00:00
6a99440efd
Add prototypes for most functions. Fix typo where statements
...
intended to increment interrupt counters for vmstat -i (i.e., "ctr++")
on 3100s had just a single "+", and hence had no effect.
1995-08-01 06:58:57 +00:00
9aae39ad42
Partial rewrite of rz dump routine. Doesn't yet write to disk but
...
does everything else. No worse than returning ENXIO, as we used to.
1995-07-24 19:36:52 +00:00
4525afdaeb
Add diagnostics for 5k/240 turbochannel interrupts, and clean up IOASIC clock
...
declarations.
1995-07-23 20:21:17 +00:00
82d5943755
Add argument prototypes - __P((void)) - to the declarations of Mach_spl*() functions.
1995-07-23 20:11:54 +00:00
1354a15fb5
Add support for Decstation 5k/240 (3MAXPLUS) to the switch controlling
...
redirection of console serial input (keyboard, mouse). Fixes non-redirection of
keyboard to X server on a 5k/240. The Mfb and sfb drivers are similarly broken.
1995-07-22 05:04:46 +00:00
594ee04ec1
Add "cpu DS5000_240" to generic config, to support 3max+.
...
3max+ interrupt handler and IOASIC clock code depend on it.
1995-07-18 02:02:38 +00:00
9c4be79d84
Clean up Ultrix compatiblity code: redo Ultrix label reading code
...
to have the same interface as native readdisklabel(), call it cleanly
from caller of readdisklabel(), and fix bug that left d_npartitions at 1
for ultrix-compat labels. Ultrix labels now actually work.
1995-07-14 01:05:22 +00:00
eac9104365
Add stubs for previously-undefined tzwrite(), tzread(), since the new
...
pmax conf.c references them. A cut-and-paste job from the pmax
rzwrite() and rzread(). tzwrite() and tzread() are utterly untested.
tzwrite() should also check for write-protect, or handle writes to a
write-protected tape gracefully.
1995-07-12 07:24:27 +00:00
479fb9e45b
add <sys/cdefs.h> inclusions. namsspace-protect physadr, label_t
...
def'ns against _POSIX_SOURCE and _ANSI_SOURCE.
1995-07-06 03:39:32 +00:00
08b7596c51
Add code to interrupt to call pppintr.
1995-07-04 12:22:21 +00:00
7263209ce6
Make each disk and tape driver define its own read and write functions.
...
Deprecate rawread() and rawwrite() completely. Remove d_strategy from cdevsw to
force the abstraction barrier.
1995-07-04 07:15:28 +00:00
7c4739e2c3
Change bootblock load code to work with old DECstation proms (2100, 3100)
...
that lack the REX callback introduced with 5k/200.
1995-06-28 10:22:32 +00:00
c83f9c5568
remove unused cpu_exec() definitions. moved "broken swap" markers, for
...
ports that still need it, to types.h.
1995-06-28 02:55:18 +00:00
d4a54b73d2
kill user-land DELAY macro, as suggested by gwr.
1995-06-28 02:43:36 +00:00
34f8cc760a
leinit: we always have at least one address now.
1995-06-27 19:54:49 +00:00
2d49c3885b
clean up definitions of ctod(), dtoc(), ctob(), btoc(), btodb(), and
...
dbtob(). remove unused definitions of ctos(), stoc(), and dtob().
1995-06-26 06:55:38 +00:00
1c0be437b1
define __BDEVSW_DUMP_OLD_TYPE for ports where it's true. clean up
...
some m68k ports inclusion of common header.
1995-06-26 05:13:37 +00:00
98df248f95
Makefile.`arch`: - Add -lcompat
...
- Change clean: target to be a double dep one,
so libraries can use the clean target too
- Add genassym to the clean targets
1995-06-24 20:46:09 +00:00
55fbbc705d
Wrap with #ifndef _XXX_FLOAT_H_/#define _XXX_FLOAT_H_/ ... /#endif.
1995-06-20 20:45:22 +00:00
1d65cdd4ab
#include <sys/cdefs.h>.
...
Wrap __flt_rounds() declaration with __BEGIN_DECLS/__END_DECLS.
1995-06-20 20:32:22 +00:00
1305dc32df
Put parentheses around macro arguments
1995-06-16 02:07:33 +00:00
8e556dece3
Change default optimization level from -O to -O2.
1995-06-09 06:44:41 +00:00
ae4eae4f63
Change reference in asm code from ``__mcount'' to ``___mcount'', to be
...
consistent with the (default) prepending of underscores to identifiers.
Because this reference is inside an ASM string it's too hairy to
conditionalize to support different toolchains that don't prepend underscores.
(Just don't do profiling with such toolchains.)
1995-05-31 00:25:06 +00:00
8a93b408d6
Fix BPF bit-rot in receive side of pmax/dev/if_le.c: prepend ether header.
1995-05-31 00:15:46 +00:00
f90f8d10aa
Removing -DKERNEL, transition to _KERNEL has been completed
1995-05-16 22:24:17 +00:00
4175c2819f
Redo 3MAX+ (5k/240) interrupt enable code.
...
Instead of being a no-op, kn03_intr_enable() sets the sw copy of the
interrupt-enable mask *and* writes it into the IO asic intr-enable
register. Boot code sets the sw copy (kn03_tc_imask) to something
sane (KN03_IM0, with tc option slots turned off). Tested and works.
Interrupt code for other IOASIC machines should be redone so that
interrupts for devices are enabled by drivers, rather than by
cpu-specific boot code. Functions common to all IOASIC machines
(PSWARN?) should be done by asic_init().
Checked in without the above changes so that 3MAX+, MAXINE and 3MIN
interrupt-(enable,handle) can converge.
1995-05-12 23:27:23 +00:00
214234c937
Fix MAXine interrupt mask routine
1995-05-05 06:48:14 +00:00
8703076975
define BROKEN_SWAP and/or cpu_swapout as appropriate.
1995-05-05 03:41:51 +00:00
3ff601e7a1
Don't conditionalize utility routines based on DEBUG flag
1995-05-05 02:45:31 +00:00
03c9dc7a48
Fix long-standing bug in NetBSD/pmax interrupt initalization on
...
Turbochannel machines with an IOASIC.
After an interrupt is taken, the IOASIC interrupt enable mask is
and'ed with the kernel's interrupt-mask variable. This masks
off any interrupts that were enabled after the hardware interrupt-enable
mask was set. Due to this bug all iynterrupts must be enabled before
the first interrupt is taken. (Interrupts enabled later aren't on in the
ioasic intr-mask register, so they aren't on in (sirm & kernelmask),
which is what used to get written back to the ioasic interrupt-mask
register. Fixed, and tested on on 3MAX+ but not xine/3min.
If this patch perchance breaks on Xines or 3mins, the old code can be
re-enabled by changing the #if 0 in machdep.c to #if 1.
1995-05-04 19:48:41 +00:00
c6a24163a3
Use Alpha cdefs.h
1995-05-03 06:04:54 +00:00
64b99b333d
The pmax 3100 interrupt-init code is broken: cpu_startup() enables
...
interrupts before it calls configure(). On 3100s, this can result in
the ethernet interface interrupting before leprobe() is ever called.
Be a bit more defensive in leintr(), where it was dereferencing a null
pointer. This reputedly fixes the oft-reported problems of 3100s not
ooting unless they're on an idle net or had a hard reset done before boot.
(Reworking the config code completely would be nice too.)
1995-05-02 20:00:09 +00:00
be2c7f3d13
If we panic inside trap(), Do a stack traceback before printing the trap log.
...
Also change the stack-traceback code to avoid having multiple returns
(and thus multiple stack pops) because with gcc -O2 that breaks the
heuristic that a "jr ra" preceding the PC precedes code to push the
current stack frame. Which breaks stacktrace() before it even
traces past itself :-(. Use a goto instead.
1995-05-02 19:51:52 +00:00
edab8dc1d9
Oops, took out a bit too much
1995-05-01 17:35:45 +00:00
7bada980a5
Oops. Undo some console code checkins that didn't belong.
1995-05-01 17:22:20 +00:00
4d059559f7
resurrect, and move files.pmax.newconf to new location.
1995-04-30 10:11:00 +00:00
fb9f07db36
Update MIPS stack backtrace code to trace through locore functions,
...
traps, and interrupts The earlier (4.4bsd) code didn't do the first two, and
got the last one wrong. Also print some functions (e.g., trap handlers)
by name. Add hook to use something other than printf() as the output
function, e.g,. for kernel debugging.
Tested with the `native' toolset, but not ELF format kernels.
(i.e., unwinding the $GP register is not tested.)
The stack backtrace code that interprets and unwinds stackframes is still
opaque and stylistically awkward.
1995-04-29 21:10:31 +00:00
f54398dae4
Add prototype (new-style) config for pmax. This doesn't yet work;
...
auto-configuration initialization code is missing. It uses "needs-count"
flags to come slightly close to what the old-style pmax source expects.
Perhaps autoconfig code can be lifted from the alpha port or volunteers
found to write some.
1995-04-28 23:34:39 +00:00
b2c7420e5a
Fix performance bug in pmax MachFlushDCache(). Old code disabled icache
...
and wasn't unrolled. This code runs cached and unrolled, giving an order
of magnitude improvement in some cases (e.g., DMA-capable network devices).
In use at Stanford DSG since late January 1995.
1995-04-28 23:17:51 +00:00
026a077a5d
Check in source code actually containing changes in previous log message--
...
fixes to turbochannel-based DECstation interrupt enabling.
(I hate network firewalls that break rsh and remote CVS.)
1995-04-28 22:50:29 +00:00
523e8bccbc
Fix hardware interrupt-mask setup in the 5k/240 (3max)+ interrupt handler.
...
(A similar fix needs to be applied to the 3min and xine handlers.
This fixes a long-standing problem when booting with a card that
wants to interrupt (e.g., a network interface) would have interrupts
enabled before a handler was set up.
Add interrupt-counting code to model-independent interrupt handler,
and 3max (5k/200) and 3max+ (5k/240) md handlers, for vmstat -i.
Similar changes for 3min and xine are obvious but not done.
Add code for 5k/240 to read, and latch, the current value of the
IOASIC bus-cycle counter at each timer interrupt. The latched
counter is needed to accurately interpolate the bus-cycle counter value
as a high-resolution clock.
1995-04-28 21:48:11 +00:00
0e59975fac
rename files files for new config/config.old naming
1995-04-28 08:19:12 +00:00
07992ead4b
Add memory-mapped address of the IO ASIC TurboChannel bus-cycle counter,
...
as present on 5k/2xx and Alpha IOASICs. Older machines may or may not
have the hardware counter. To be used as a high-resolution DECstation clock.
1995-04-28 04:44:21 +00:00
ef8023a47b
Check in changes suggested by Ralph Campbell: update variable names
...
to use turbochannel slot numbers, add a couple of extra slots, just
in case.
1995-04-28 03:10:41 +00:00
59f33bea48
Add sfb device driver
1995-04-27 20:52:39 +00:00
1992309f8b
Fix a few compat code casualties
1995-04-25 19:16:43 +00:00
3eca8117f7
Fix up args to scdebug_{call,ret}
1995-04-25 05:30:14 +00:00
de42a28a1b
- added sunos_machdep.c for sun3, atari, amiga and mac68k.
...
- changed machdep.c and trap.c to use struct emul.
- remove ep_setup references.
- added struct emul to all emulations.
1995-04-22 20:24:40 +00:00
71d223dc04
Add dummy fb device driver reference for compatibility with conf.c changes
1995-04-21 23:58:36 +00:00
acc8d94430
Oops, still need to set waittime...
1995-04-21 23:04:32 +00:00
88603eca8f
Use vfs_shutdown to sync disks...
1995-04-21 22:16:01 +00:00
92509d125f
Add support for clean flag
1995-04-21 20:54:04 +00:00
6a233c363c
Fix up tty struct change from conf.h
1995-04-21 01:24:26 +00:00
07a0117e2a
Fix up tty struct changes
1995-04-21 01:21:06 +00:00
8da89a0fc3
Fix leioctl declaration mismatch
1995-04-19 18:06:03 +00:00
7945dde65c
leinit() returns void. Prototype more functions. Garbage collect some things
...
in leattach().
1995-04-19 16:23:11 +00:00
3ff27e09e2
fixes (mostly) from Jonathan Stone, to make this driver match the
...
state of the world as expected by the networking headers/mi code.
i changed one or two things in his patch slightly (do the lestart()
proto the right way, actually delete the if_output assignment line).
1995-04-19 06:56:21 +00:00
db8fd32d53
Add cpu_exec.c, rcons.c
1995-04-12 20:08:40 +00:00
a3c29d62df
Use _KERNEL, not KERNEL
1995-04-12 01:55:35 +00:00
30bad269b8
Fix bogus declaration for mm and chrtoblktbl
1995-04-12 00:01:01 +00:00
32a6db8a76
Mips specific portions of ieeefp.h (fp_rnd, fp_except, constants, etc.).
1995-04-11 18:20:46 +00:00
600a989fb6
Changed FLT_ROUNDS from constant to a call to __flt_rounds(), so that the
...
current rounding mode is accurately reported.
1995-04-11 18:18:35 +00:00
7baeefcfb5
Make TOCCATA support the new console regime
1995-04-11 10:52:33 +00:00
ef6295229a
Raster Console pseudo-device driver
1995-04-11 10:23:32 +00:00
4b8e4e1a20
Smart Framebuffer driver
1995-04-11 10:21:51 +00:00
10ed38a4df
Add rcons pseudo-device
1995-04-11 10:14:52 +00:00
94f146ad0f
Console initialization code
1995-04-11 10:08:42 +00:00
fecbe784d6
Oops; finish that last change.
1995-04-10 12:45:53 +00:00
22cefc03bc
Bring back pmap_kernel(), for now always inlined as a pointer to
...
kernel_pmap_store.
1995-04-10 12:41:29 +00:00
127e0761c9
Add mmopen(), mmclose(), and mmmmap() where appropriate. Lock vmmap when
...
needed. Make types consistent.
1995-04-10 11:54:47 +00:00
9da61beca9
map --> mmap
1995-04-10 07:31:22 +00:00
7ccad2faec
Update for conf.h.
1995-04-10 07:29:42 +00:00
9e5184dfec
Add dummy cnstop(), more return types.
1995-04-10 07:14:33 +00:00
404e6bc5c9
Put endif COMPAT_09 inside function definition
1995-04-10 04:47:47 +00:00
23023327a2
Move cpu-specific exec support to cpu_exec.c; Support 4.4BSD a.out
1995-04-03 04:38:04 +00:00
8ba211cde0
Added #define _KERNEL
1995-03-28 18:37:27 +00:00
71ab4ed9dc
KERNEL -> _KERNEL
1995-03-28 18:13:48 +00:00
fa2133533d
invoke ktrsyscall with (vp, code, argsize, args) as args.
1995-03-26 08:03:29 +00:00
f86410093b
Changed name of __weak_reference() to __indr_reference(). They really
...
are indirect references, and I want to add a real __weak_reference()
macro to <machine/cdefs.h> soon.
1995-03-23 19:58:48 +00:00
d57fb977bb
Added -D_KERNEL to CFLAGS alongside each -DKERNEL.
1995-03-23 19:46:18 +00:00
b8403d582b
don't be so quick to cast macro arguments to unsigned; if the
...
arguments are really off_t's (e.g. to btodb), then you can lose
information. This was the "> 4G file systems don't work" bug; physio
uses btodb, which was broken.
1995-03-18 07:22:43 +00:00
2f805fa51b
copy*str() should use size_t.
1995-03-09 12:05:21 +00:00
4c34be6b52
Clean up deleted files.
1995-03-01 00:00:00 +00:00
2368e7c469
Added DECwrl networking TC options
1995-02-01 04:53:13 +00:00
ca69d7e138
Add Jonathan's T3 device driver...
1995-02-01 04:49:40 +00:00
d1d5ee421f
Fix up callv references
1995-02-01 04:43:52 +00:00
830a53e394
ANSI says that <stdarg.h>'s va_end macro must expand to a void expression.
...
For consistancy, I'm changing <varargs.h> too.
1995-01-28 01:51:46 +00:00
2ef4ca1f3d
vn -> vnd renaming, for consistency
1995-01-25 04:48:07 +00:00
f3933f8a6a
Undo argument change to cnopen
1995-01-23 18:39:30 +00:00
9540190d45
This file, which will be included by <sys/cdefs.h>, will contain macros
...
such as __warn_references() and __weak_reference() which are actually
machine dependant. This will make it easier for ports that are being
bootstraped with ELF and ECOFF based toolchains.
This change also introduces a new macro, _C_LABEL(x). _C_LABEL expands
its argument, an identifier, to a character string of the identifier
name as it is represented in an object file.
For most ports, _C_LABEL(x) will expand to "_x", for ELF based ports
_C_LABEL(x) will expand to "x".
1995-01-19 01:38:36 +00:00
ca985c53b6
Many changes from Jonathan Stone and a few from me to make small boot blocks and handle NetBSD a.out
1995-01-18 06:53:36 +00:00
8f24f1259a
Write out new-style core files
1995-01-18 06:52:46 +00:00
9e9d8e5a78
Ultrix pcb_regs compatibility, reorder interrupt handlers (probably futile), use new callv naming
1995-01-18 06:51:46 +00:00
07fcdf4578
Add partial sfb support, ELF and 4.4BSD a.out support, Ultrix-compatible pcb_regs, fix sigcontext, probably more
1995-01-18 06:49:12 +00:00
13301513c1
Add conditional gp support; add interrupt disable before setting or clearing soft ints
1995-01-18 06:45:29 +00:00
2c8e2a0818
Update clock initialization/updating for interoperability with Ultrix (still some problems with this, though
1995-01-18 06:43:47 +00:00
834d6abd93
Add definition for tc_enable_interrupt for future reference
1995-01-18 06:42:56 +00:00
4e0b8e9b63
break mullo and mulhi out of gp regs in sigcontext
1995-01-18 06:42:01 +00:00
14f5639dca
Make register definitions compatible with Ultrix
1995-01-18 06:40:12 +00:00
09f6d5d141
Make pcb_regs structure compatible with Ultrix
1995-01-18 06:39:43 +00:00
faf867c2b2
Support for alternate compilers and file formats
1995-01-18 06:38:57 +00:00
b9a71d25d2
Add NUMBOOT for benefit of disklabel program
1995-01-18 06:37:55 +00:00
714099f07a
Add arch/pmax/pmax/elf.c as a standard file
1995-01-18 06:37:01 +00:00
6919eac432
Make it easier to use different compilers (we hope)
1995-01-18 06:36:13 +00:00
40073dc687
Clean up deleted files.
1995-01-18 06:19:31 +00:00
c19690fb69
Start code for boot loader (under new name with some changes)
1995-01-18 06:19:01 +00:00
2dd8487ae4
Support for loading ELF on NetBSD/pmax - to be combined with elf loader under sys/compat later
1995-01-18 06:16:33 +00:00
3a011804a6
ELF format (to be combined with elf header in sys/compat later)
1995-01-18 06:15:38 +00:00
20a4f723d7
4.4BSD binary format
1995-01-18 06:14:58 +00:00
355685bb12
Configuration for a MAXine
1995-01-18 06:14:27 +00:00
d7a8b2964f
Only define sig_atomic_t when _ANSI_SOURCE is defined.
1995-01-10 19:01:00 +00:00
45a2b7262c
Change majour for rz to 21. (From Jonathan Stone)
1995-01-03 22:42:03 +00:00
f2c558b59b
microtime() returns void.
1995-01-03 22:37:41 +00:00
e5049f4d59
make the definition of _JBLEN mach. dep. header-dependent.
1994-12-20 10:36:27 +00:00
a42208fd05
More underscores...
1994-12-15 17:48:39 +00:00
c32023e792
More underscores...
1994-12-15 17:02:08 +00:00
487dab2ff9
Make a new macro _C_LABEL(), which prepends an underscore to the argument unless
...
NO_UNDERSCORES is defined. Use it in the *LEAF() and END() macros.
1994-12-15 15:26:26 +00:00
db904fa0d4
Remove underscores from uses of *LEAF() and END(). Use _C_LABEL() in explicit
...
symbol references.
1994-12-15 15:18:29 +00:00
d42a8b725e
Remove extra arg to d_open.
1994-12-14 19:10:08 +00:00
c0b7039208
removed ifdef XXX
1994-12-12 19:34:59 +00:00
ec60b72f58
Put Ultrix disklabel compatability back in.
1994-12-08 18:33:19 +00:00
a056ea67c9
get disk and block size when opening device rather than probe time
...
(From Ralph Campbell)
1994-12-05 19:11:59 +00:00
50c5dd6f0d
fix problem with disconnects (Ralph Campbell)
1994-12-05 19:11:12 +00:00
ba0ac0e803
added missing #ifdef DEBUG
1994-12-01 16:41:05 +00:00
fcf0991366
new asc.c from Ralph Campbell
1994-11-28 19:05:54 +00:00
2a5cfe5b41
fix from Jonathan Stone
1994-11-28 18:45:39 +00:00
1e9a7e3573
some fixes and Ultrix compat stuff from Jonathan Stone.
1994-11-28 18:42:21 +00:00
363152617f
Ultrix compat stuff from Jonathan Stone.
1994-11-28 18:41:31 +00:00
5b1da4bc9b
Removed fp.S
1994-11-28 16:28:20 +00:00
15cf365b55
more patches from Jonathan Stone
1994-11-24 17:50:49 +00:00
b123b45ce0
changed fp.s to fp.S
1994-11-23 23:06:43 +00:00
fc16452217
Ultrix compatable device numbers (from Jonathan Stone)
1994-11-23 22:33:46 +00:00
e5d5a6cf17
thread_wakeup wants (void *) not (int)
1994-11-23 20:46:20 +00:00
91ed53db13
more changes from Jonathan Stone
1994-11-23 18:13:58 +00:00
342f9cd185
more underscore changes (from J. Stone)
1994-11-23 17:47:53 +00:00
5eef1840c0
catching up with other changes
1994-11-22 18:59:57 +00:00
907abf89c7
put #ifdef DEBUG around call to debug routines
1994-11-22 18:58:43 +00:00
4deb1cf175
run locore.S and fp.S through cpp
1994-11-22 18:57:25 +00:00
2c274e6ac8
Clean up deleted files.
1994-11-21 23:32:58 +00:00
e7558eafd1
put #ifdef KERNEL around CLK_TCK define
1994-11-15 19:00:49 +00:00
393ee3693c
Surrounded call to debug routine with #ifdef DEBUG
1994-11-15 18:59:40 +00:00
705ee976cf
Prepended underscores
1994-11-14 23:48:58 +00:00
add2031dcf
Prepended underscores
1994-11-14 23:33:46 +00:00
40abc70ce2
changed open prototype
1994-11-14 05:55:23 +00:00
a63beafc2b
new RCS ID format.
1994-10-26 21:08:38 +00:00
70d91988ab
update for new syscall args description mechanism
1994-10-20 05:34:04 +00:00
f501e4e128
make <stdarg.h> a symlink, and clean up ports' stdarg.h and varargs.h files.
1994-10-15 04:57:29 +00:00
49c34d3337
move arch dependence to archs. clean up a bit. deal with weird MAXPARTITONS.
1994-10-14 18:26:22 +00:00
badcc17a6d
Add constants required by XPG3
1994-10-05 17:16:29 +00:00
fd536b8545
vmunix --> netbsd
1994-09-17 00:24:06 +00:00
a0bba56f2a
add USPACE
1994-08-23 19:13:54 +00:00
92da9d2f33
can't do ptr math on void *
1994-08-18 22:09:35 +00:00
9f6d99b3e2
get ether_type byte order correct
1994-08-17 01:33:15 +00:00
cefdccbf31
changes for the new sys_process.c, and some cleanup
1994-08-15 16:37:04 +00:00
acb695e52e
make nfs diskless work in trunk
1994-07-24 23:46:40 +00:00
6187f00477
make diskless work
1994-07-24 23:04:32 +00:00
3fbc338a62
define __BIT_TYPES_DEFINED__ for compatibility with things like BIND and nvi
1994-07-20 05:44:19 +00:00
c06d6459bb
fix cpu architecture.
1994-07-05 21:25:07 +00:00
f8fa8176cf
another bad include
1994-07-05 04:24:14 +00:00
50b13742e4
_MACHINE_VARGS_H_
1994-06-29 00:45:01 +00:00
f6143cedc0
assembler problem
1994-06-25 07:05:12 +00:00
5ed96e480a
ultrix compat by default
1994-06-22 03:45:26 +00:00
2d77dbfd70
oops
1994-06-21 23:10:13 +00:00
bd3ae321b9
ufs --> ffs...basically back out a pre-fs change
1994-06-16 05:11:06 +00:00
eff56c22fa
much works but untested w/new fs. expect more tomorrow
1994-06-15 05:18:38 +00:00
51c7c774de
Clean up deleted files.
1994-06-15 05:18:33 +00:00
57642fb485
much works but untested w/new fs. expect more tomorrow
1994-06-15 05:18:01 +00:00
04a3735652
remove temporary hacks now that the new filesystem stuff is in
1994-06-14 02:47:36 +00:00
e501fd2ea1
fix a guess...someone tried to boot it on a 240.
1994-06-02 21:27:50 +00:00
1d82b81e32
Clean up deleted files.
1994-06-02 06:20:39 +00:00
5e54277664
fix a few integration bugs, add vmfault debugging, more ultrix stuff
1994-06-02 06:14:56 +00:00
8f22e98c12
VM_MIN_ADDR -> 0
1994-06-01 18:51:16 +00:00
d58065c17b
the evil -G 0 must be used on locore too
1994-06-01 07:38:51 +00:00
8b1cefa2ee
cpu_exec_ecoff_hook() returns a errno
1994-06-01 04:50:30 +00:00
61cb3f2f8f
new filesystem stuff isn't in yet
1994-05-30 07:26:19 +00:00
54088756f8
last bit of MDP_ULTRIX
1994-05-30 06:39:18 +00:00
9cf6b07329
add typecast, will compile
1994-05-30 06:12:07 +00:00
db35f66457
forgot a compile directory
1994-05-30 05:07:21 +00:00
af77c1caf2
more likely to work now, probably less knf...thats the next project
1994-05-28 20:21:30 +00:00
6b63c739f3
bsd 4.4-lite pmax port as ported to NetBSD
1994-05-27 08:57:32 +00:00
814f4529f3
upgrade to bsd 4.4-lite code base. only mod is rcsids
1994-05-27 08:40:50 +00:00
377b097932
upgrade to bsd 4.4-lite code base. only mod is rcsids
1994-05-27 08:39:00 +00:00
05a7ffd00c
fix rlimit calls for ultrix compat; untested, but should work
1994-05-05 03:31:07 +00:00
14232eac12
Clean up deleted files.
1994-04-16 08:38:29 +00:00
c6c2201156
kill symbols.{raw,sort}; no longer necessary, with kvm dbs.
1994-04-16 08:38:22 +00:00
e937bc9bfd
convert vm system to use new queues. I'll never write code w/queues again.
1994-04-15 07:04:03 +00:00
d64461d7d3
add basic integral types (a la sparc port) that new nvi wants.
...
mark old 'basic integral types' as XXX -- they should be squished
when whoever gets this port working.
1994-03-14 02:12:06 +00:00
db6b4cc739
RMP goes away
1994-01-24 00:48:15 +00:00
b2c0b0a0c8
add a pmap_kernel() function
1994-01-16 00:58:07 +00:00
6db422de7f
cpu_exit returns void
1994-01-16 00:53:44 +00:00
7c98e17fdb
add sysarch() stub
1994-01-16 00:52:47 +00:00
405bf3d48d
use SYS_syscall instead of SYS_indir
...
and turn off the 64 bit syscall interface
1994-01-16 00:49:47 +00:00
376a5f4108
pullin vm_statistics.h
1994-01-16 00:42:16 +00:00
18b8ee0b5c
prototyped callvec (ripped from stand/libsa/callvec.c)
...
#ifdef RB_MINIROOT support
our setregs() takes a stack pointer argument
netbsd-ify sendsig/sigreturn code, ie. alternate stacks
add dummy stubs for ptrace
1994-01-16 00:41:17 +00:00
e04b358332
cleanup
1994-01-16 00:34:10 +00:00
aa7ced4bd5
intrframe -> clockframe
1994-01-15 18:46:00 +00:00
3fab097f5f
Clean up deleted files.
1994-01-15 02:15:38 +00:00
7b7ccf8500
new; pretty much straight from net/2
1994-01-15 02:04:56 +00:00
ecefae0672
don't pull in arch/pmax/stand/libsa/callvec.c -- it's a silly idea.
1994-01-14 21:19:27 +00:00
0cbd1c6d6e
netbsd-ify
1994-01-14 19:50:45 +00:00
6b8ee3c10f
various small netbsd-ifications
1994-01-14 05:05:17 +00:00
d22f586c29
everything is now in sys/arch/pmax; and delete 4.4isms we don't do
1994-01-14 05:00:07 +00:00
44663395d2
s/vmunix/netbsd/
1994-01-14 04:57:44 +00:00
f8100bd977
Clean up deleted files.
1994-01-14 04:53:43 +00:00
9fd56d82c3
some pmax updating (Terry Friedrichsen is helping on this now).
1994-01-14 04:53:37 +00:00
96faaf5809
sign extension bug fix from <rick@snowhite.cis.uoguelph.ca>
1993-11-08 03:39:21 +00:00
f51bf630eb
default is to have nbuf = 0 and bufpages = 0
1993-10-15 03:00:56 +00:00
56cc97cb80
update from rick, tarfile of Oct 11 10:46
1993-10-15 02:56:33 +00:00
63a052d489
fixed two icky rcs-log's.
1993-10-12 03:48:52 +00:00
fe806afec2
pmax code from <ralphc@pyramid.com> & <rick@snowhite.cis.uoguelph.ca>
1993-10-12 03:22:19 +00:00
jonathan