99e86ac209
Remove some gross hacks that were added due to interrupt grossness that
...
has been partially fixed. Also, add a new flag (which rearranges them
a bit, unfortunately) to use PDMA for polled transfers.
1996-05-08 03:44:56 +00:00
652b291390
- Rewrite scrollup(), scrolldown(), and clear_screen() to move/clear only
...
visible screen memory. This results in a considerable performance win
at all depths.
- Correct clear_screen() behavior when clearing to the top and bottom of
screen; start at current cursor position, not current cursor row.
- Add local prototypes, and other KNF.
1996-05-07 15:52:19 +00:00
38b11e7c82
Get rid of some old, now meaningless macros.
1996-05-07 03:13:40 +00:00
8ed57c561e
Clean up an error printf() and use proper macro.
1996-05-07 03:12:12 +00:00
6de4db6bbc
Changed struct ifnet to have a pointer to the softc of the underlying
...
device and a printable "external name" (name + unit number), thus eliminating
if_name and if_unit. Updated interface to (*if_watchdog)() and (*if_start)()
to take a struct ifnet *, rather than a unit number.
1996-05-07 01:08:15 +00:00
af19dd53a3
This code has not been used in ages and there are at least 2 better 5380
...
drivers in the tree, now.
1996-05-06 22:34:09 +00:00
1d8ac2ad92
Update to something closer to the atari port.
1996-05-06 22:26:26 +00:00
314dd5b20b
Set sc_slot--we need it later.
1996-05-06 03:27:20 +00:00
6026c5dfd7
Ooops. Remove debugging printf().
1996-05-06 03:27:06 +00:00
db495102be
Do not depend on the nubus being mapped in one huge segment.
1996-05-06 01:08:24 +00:00
2c9ba25cc1
Fix typo in last.
1996-05-05 16:21:20 +00:00
30023f7acd
MicroSpeed mouse support from Taras Ivanenko <ivanenko@ctpa03.mit.edu>.
...
Also some updates to actually used #defined constants instead of numeric
constants.
1996-05-05 14:33:55 +00:00
37163421a3
Prototype for -Wall -Wstrict-prototypes -Wmissing-prototypes -Wno-uninitialized
...
Also change the device probing scheme to use something a bit more rational.
A current side-effect is that nubus cards are double-mapped. I expect
to fix that shortly.
Also change splclock() to block everything but serial hardware interrupts.
1996-05-05 06:15:56 +00:00
b2af0c2297
Kill unused variables and fix prototypes.
1996-04-30 18:11:38 +00:00
b50e8aab63
- Drop SCSI IRQ interrupts if we are already handling one. This works around
...
a condition that occurs with some slow SCSI devices when they disconnect
(e.g. the AppleCD 600), generating spurious selection interrupts.
- Reorganize the debugging code slightly.
1996-04-30 17:07:17 +00:00
eb335437e2
Ooops. ncr_sbcreg.h -> sbcreg.h
1996-04-25 23:47:06 +00:00
aca6a2e6da
Renamed these files.
1996-04-25 22:26:52 +00:00
95101e1310
Renamed these files.
1996-04-25 22:02:58 +00:00
a0bca74134
Remove some now-useless code.
1996-04-25 21:18:04 +00:00
18fd76201e
We don't need to enforce the MAX_DMA_SIZE limit in dma_alloc();
...
this is handled properly by sbc_drq_intr() already.
1996-04-25 14:40:26 +00:00
2e936aa8ff
- Remove several hacks that didn't do much but waste cycles.
...
- Disable interrupt-driven PDMA when writing (use polled PDMA instead).
- Be more careful about when to flag a transfer as completed.
The result of these changes is that interrupt-driven PDMA works well
enough to bring the system up.
1996-04-25 06:18:41 +00:00
27c9c12e72
Clean up sbc_drq_intr() a bit; also, be more paranoid about size of transfer.
1996-04-23 14:20:28 +00:00
9d1cd5e9be
Make this compile again; will need to deal with matchbyname() later, though.
1996-04-04 06:59:29 +00:00
1fa595a2f1
Clean up for higher warning level.
1996-04-01 01:35:48 +00:00
933d138841
Change %r -> %: as for recursive printf's
1996-03-30 21:01:21 +00:00
b39b4939fc
Fix minor oversight in a sanity check--caught by Jason, I think, and reported
...
by Scott.
1996-03-29 02:12:41 +00:00
08126b5bec
via.h -> machine/viareg.h.
1996-03-29 02:06:04 +00:00
2422f1bc4e
Get rid of a compiler warning about Debugger();
1996-03-24 16:58:46 +00:00
32a38f24e7
DEBUG -> SBC_DEBUG, and fix comment regarding sbc_options
1996-03-21 04:49:20 +00:00
0b59005d3d
Fix a long-standing bug uncovered by the new device attachment
...
model. Thanks to Jason Thorpe for the fix (fixed PR 2235).
1996-03-20 05:10:54 +00:00
82d914d090
New device attachment scheme:
...
- split softc size and match/attach out from cfdriver into
a new struct cfattach.
- new "attach" directive for files.*. May specify the name of
the cfattach structure, so that devices may be easily attached
to parents with different autoconfiguration semantics.
1996-03-17 01:26:49 +00:00
1c817d1c3c
Fix a typo in last.
1996-03-07 20:47:01 +00:00
6da2ce259c
Allow for a machine dependent match function - rd_match_hook()
1996-03-07 10:25:28 +00:00
7c44b1180f
Disable SCSI linked commands, but allow kernel option to override.
1996-03-07 02:26:37 +00:00
d504670861
Fix for serial console handling from Bill Studenmund.
1996-03-06 23:22:41 +00:00
a7daa2d931
- Clean up DEBUG code.
...
- Setting the "monitor BSY" flag for polled PDMA is non-optimal. The
polled requests generate an interrupt that isn't serviced until the
command has been cleared from the queue.
1996-02-22 14:31:26 +00:00
ab3f741911
Update to latest Atari driver, but with some local modifications.
1996-02-19 02:51:03 +00:00
ed73ac3b48
New SCSI driver for Macintosh II family machines, implemented using
...
the MI 5380 driver. It has been verified to work on the IIx, IIsi,
and IIci only, but should work with any Macintosh 5380-based SCSI
controller.
- This driver is _not_ intended to be a general purpose replacement
for the `ncrscsi' driver. It is an alternative for those having
problems with that driver.
- Disconnect/reselect doesn't (yet) work, so don't expect SCSI tape
or magneto-optical disk drives to function properly.
1996-02-10 23:28:41 +00:00
2a878c9a3a
Move debugging defines, etc. into mac68k5380.c and use them instead of
...
something similar but different. Make a few cosmetic changes.
1996-02-03 23:17:53 +00:00
5336dade8e
Force the talley counters to be read when we get the interrupt. GCC was
...
nicely optimizing the reads out for us. Kudos for this one go to
Steven R. Weiss <srw@hvcn.org>.
1996-02-02 15:30:56 +00:00
88e512b693
LOCORE -> _LOCORE
1996-02-01 22:28:24 +00:00
229c36d3dd
Patch a few of the holes in the machine-dependent part of this driver.
...
Sync the m.i. part with the Atari.
1996-01-24 06:02:06 +00:00
0d6552d914
Fix typo in last change.
1996-01-13 14:03:38 +00:00
2a61903be4
Patch to at least recognise FOCUS EtherLAN. From Erik Bertelson
...
<erik@sockdev.uni-c.dk>
1996-01-12 04:52:58 +00:00
46a202fc6a
Fixes from PR #1931 w/ minor mod in vm_machdep.c
1996-01-12 04:16:25 +00:00
39f642161a
Keep two states for pdma debugging. Turn debugging back on. Sigh.
1996-01-11 15:25:53 +00:00
631612b677
Move splzs to spl4 from splhigh. Really same difference...
1996-01-11 15:23:01 +00:00
f5269d0ff6
Fix from Paul Goyette for off-by-one error.
1996-01-06 15:56:12 +00:00
682c4ec08f
Bring in a few changes from Atari port.
...
Add support from Paul Goyette for keeping more than just the last 2
states when debugging.
1996-01-06 05:18:06 +00:00
3da4b2a160
The IST_* and IPL_* constants are not bus-specific; don't treat them as such.
...
Change splimp -> splnet in Ethernet, ARCnet, and FDDI drivers.
1995-12-24 02:29:35 +00:00
486bcce207
Remove printf() that I forgot about.
1995-12-13 14:30:29 +00:00
405ac4248f
Fix from Paul Goyette to disable linked commands on drives that
...
reject them for simple commands. Leo W. reports that this does
not work for some systems. It's better than what we have now,
though. From Paul Goyette <paul@pgoyette.bdt.com>.
1995-12-13 03:48:07 +00:00
4b2a9a582d
Update from Bill Studenmund <wrstuden@loki.stanford.edu> with some minor
...
cleanup from me. Now supports serial console.
1995-12-13 03:09:57 +00:00
37b09a913d
Double ring limits from Bill Studenmund <wrstuden@loki.stanford.edu>.
1995-12-13 03:08:12 +00:00
76b94759a1
Fix from Paul Goyette (paul@pgoyette.bdt.com) for drives that don't grok
...
linked commands.
1995-12-04 02:10:44 +00:00
1b03745209
cmdlen-2 is right for the last byte of the command. Ifdef out for right now,
...
though, as some devices apparently don't support linked commands and will
reject commands that have the link bit set in them.
1995-12-01 15:14:11 +00:00
d416ec2cc9
Put the link flag in the right place.
...
Pointed out by Paul@pgoyette.bdt.com (Paul Goyette).
1995-11-30 14:25:40 +00:00
f9ba6adcd7
Add rd_root.c from sun3.
1995-11-21 04:53:20 +00:00
9a1fb2674a
Fixup error/debugging message.
1995-11-01 04:59:03 +00:00
c587e77144
Remove bogus assignment.
1995-11-01 04:58:21 +00:00
680ada5add
port-mac/1707: mac68k mouse drag problems with Cmd+arrow keys
...
from Ken Nakata <kenn@remus.rutgers.edu>
1995-11-01 04:40:21 +00:00
8218c4005c
Pull in all but one of Leo's changes from the atari copy.
1995-10-31 15:32:35 +00:00
f5fae9d016
Port of Sun3/Sparc zs driver from wrstuden@loki.stanford.edu
...
(Bill Studenmund). Should be massaged into machine independence
for 1.2.
1995-10-09 12:42:16 +00:00
685b9057c2
Pick up changes from leo's latest version.
1995-10-08 17:25:19 +00:00
d510375b06
Change to allow nack_message() to take an argument and send
...
MSG_REJECT_MESSAGE instead of MSG_ABORT when we get an extended message.
This allows a DEC drive to work when it attempts to negotiate synch.
transfers on us.
1995-10-02 09:03:53 +00:00
0066d1a66f
Finally get this right... Final fix from Paul Goyette paul@pgoyette.bdt.com
1995-10-01 05:10:20 +00:00
c1138ce68a
Yet another error in the (next-to) last changes.
1995-09-30 21:34:54 +00:00
890baf19ea
Fix stupid error in one of my last changes here.
1995-09-30 19:42:34 +00:00
232169396a
Bullet-proof a little.
...
Make some more pdma code conditional on USE_PDMA.
Handle transfers of size > MIN_PHYS.
1995-09-27 03:38:57 +00:00
4d52f57876
Add Technology Works ethernet card. From
...
Kazunari Nakamura <kazu@nkk.co.jp>.
1995-09-24 14:13:56 +00:00
e23598f24f
Much improved pdma transfers.
...
Still not nearly as fast as FWB's drivers under the MacOS.
Uses the "blind" transfer method instead of polled pdma.
1995-09-23 01:11:42 +00:00
4a9cf8407c
Fix a warning.
1995-09-21 11:13:27 +00:00
fbd9919364
Fix warning and use __P for prototypes.
1995-09-21 03:36:25 +00:00
e8dbcda856
Do not define MIN_PHYS here--it is m.d..
1995-09-18 13:52:43 +00:00
a106882a85
Only use PIO instead of PDMA if DRIVER_NOINT.
1995-09-16 18:22:33 +00:00
a8b0260a05
Sync. with atari ncr5380.c -- mainly whitespace changes.
1995-09-16 15:06:55 +00:00
4dc81200f5
Rename scsi_main_irq() to pdma_ready().
...
Missed a few ATNs in last patch. (pointed out by Leo).
Raise timeout from 100 to 1000. From Leo.
1995-09-16 11:45:18 +00:00
048e948791
As Leo pointed out, my last change was not safe. This one should be.
...
I added two new bitfields to ncr_softc. They flag which devices have
been selected, and which ones have failed to go to message out when
selected with ATN. If a target fails to go to message out the first
time it is selected, it goes into the latter bitfield. If it fails
thereafter, we treat it as we did before.
1995-09-15 01:52:18 +00:00
1b34b69c93
Gah... The Asante SCSI/ethernet box doesn't answer the ATN request
...
for a 'MESSAGE OUT' phase, so add support in scsi_select() for the
phase to be either 'MESSAGE OUT' or 'COMMAND'.
1995-09-14 02:54:05 +00:00
d8dc3d91c0
Update for Leo's changes.
1995-09-12 22:31:45 +00:00
1ae7af5b59
Updates from Leo's changes in the atari port.
1995-09-12 21:20:18 +00:00
639f90ef6e
Update from Leo's changes.
1995-09-12 21:05:58 +00:00
c91abc3e61
Remove infinite loop per Leo and Mycroft.
1995-09-05 11:21:34 +00:00
19a99aa395
Get softc as parameter in interrupt function, using new changes from
...
via.[ch]
1995-09-04 05:07:16 +00:00
02883e7341
Remove an extra "talk" command--from Ken Nakata <kenn@remus.rutgers.edu>
1995-09-04 02:50:57 +00:00
86d6e121cd
Add support for Extended Apple Mouse Protocol from
...
Ken Nakata <kenn@remus.rutgers.edu>.
1995-09-03 20:59:53 +00:00
30c554fc9d
Changes from Walter Ruetten <walter@ghpc8.ihf.rwth-aachen.de>.
...
This forces the need for booter version 1.8.
1995-09-03 14:37:16 +00:00
745cb60f16
Note that this is now an obsolete driver.
1995-09-03 03:39:38 +00:00
166af00381
Make a local copy of the atari m.i. scsi driver sources for the time
...
being. Some people aren't supping arch/atari and this allows those
people to get the sources.
1995-09-03 03:36:35 +00:00
a7783604fd
Optimize this some. Still seems slower than it ought to be.
...
Register interrupt functions with via.c.
Clean up somewhat. Turn off DEBUG.
1995-09-02 19:29:42 +00:00
9f203a792f
Weren't quite ready for the last change.
1995-09-02 05:41:12 +00:00
e60752e507
Rearrange a bit.
1995-09-02 05:35:59 +00:00
bee422d998
DTRT. This should be considered the base version of the file.
1995-09-02 03:19:37 +00:00
e46e8e7a57
A first pass at a scsi driver based on the Atari ncr5380{reg.h,.c} code.
1995-09-01 03:43:49 +00:00
503d3c4927
Add constants for CSI's communications card.
1995-08-25 21:20:57 +00:00
1ed5c0babc
Some code to support a vector passed in from booter 1.8.
1995-08-24 04:27:16 +00:00
ae51ffca30
Always fail when probed--until this driver works.
1995-08-14 03:55:28 +00:00
80d7b0695a
minphys() functions really should return void.
1995-08-12 20:30:45 +00:00
8f58d57321
Don't fake these values.
1995-08-11 17:48:19 +00:00
72d557cf87
The serial console works again (at least on the Q700).
1995-08-11 03:29:07 +00:00
d192d70a87
Note that we've been initialized.
1995-08-11 03:02:04 +00:00
100380f075
Do the serial console a bit better (still has problems).
1995-08-11 03:00:15 +00:00
81cc5998a1
Missing increment operator for if_opackets in last change.
1995-08-09 12:16:10 +00:00
70065c2ed5
Nuke int_video_start in favor of consistent use of mac68k_vidlog.
...
Don't find the internal video more than once.
Probe for internal video before nubus instead of after.
1995-08-04 02:55:06 +00:00
fb5e0a34bb
Be consistent and use mac68k_vidlog instead of int_video_start.
1995-08-04 02:47:31 +00:00
fc8739097d
Fix signed/unsigned gaff in last.
...
Bring up-to-date with latest rash of changes to if_ed.c.
1995-07-30 21:39:17 +00:00
ff5fa674dd
Fix the internal video probe again.
1995-07-30 21:35:00 +00:00
139f62c079
Add support for Farallon from Brian Gaeke (brg@dgate.org).
1995-07-30 13:38:04 +00:00
cf0aca3cb4
Read the packet header count in bytes, not as a word--word reads return
...
invalid data on some cards (notably old Apple Ethernet NB and Farallon
cards at least).
1995-07-30 02:44:27 +00:00
a2f49ac930
Don't show up in "slot" 0xe.\n
1995-07-28 01:34:58 +00:00
ffe4785a58
update SCSI minphys routines' definitions to match standard minphys()
...
definition and usage.
1995-07-24 07:33:32 +00:00
c5724ea3a3
Some more bugs fixed and functionality corrected by:
...
"Paul R. Goyette" <paul@pgoyette.bdt.com>.
Implemeted the Set Scrolling Region, Set Tab Stop, and Clear All
Tab Stops functions.
1995-07-17 01:24:34 +00:00
30c70a7c59
patch to handle cursor moves better. From Paul Goyette
...
(Paul@pgoyette.bdt.com )
1995-07-09 15:36:41 +00:00
3758e23b79
Add another routine for the grf display-specific drivers to return a physical
...
address.
1995-07-06 17:13:45 +00:00
d1d1fbc094
Put in a cast to make compiler happy.
1995-07-06 04:17:15 +00:00
f3274364d4
Fix a bug I introduced earlier.
1995-07-06 00:28:32 +00:00
38031d912a
First cut at a kludge for IIvx internal video.
1995-07-04 18:55:11 +00:00
2e4f1e0daa
Update a bit.
1995-07-04 14:38:49 +00:00
2510a4f689
A few nits.
1995-07-04 14:38:34 +00:00
1040af3492
Add missing interface for getting a grfmode structure from kernel.
1995-07-02 05:26:27 +00:00
ed434b457d
Fix grfmap() as well as grfmmap().
1995-07-02 00:49:52 +00:00
932a8fc9af
Set and use new fboff element from grfmode structure.
1995-07-02 00:30:25 +00:00
3401cca400
Fix buglet that was missed when converting nubus to non pa==va mapping.
1995-07-01 23:40:38 +00:00
705e6bd12b
Fix oversight.
1995-06-30 05:21:33 +00:00
29bb03860c
Option key fix from Ken Nakata (kenn@remus.rutgers.edu).
1995-06-30 01:23:21 +00:00
2b71eae2c7
note that most of dev/ic's contents have changed names
1995-06-28 04:30:30 +00:00
b1598cdd1b
Remove a compile warning.
1995-06-25 02:46:46 +00:00
7542473d6d
Clean up I/O base settings a bit.
1995-06-21 03:03:13 +00:00
697011742c
Add some debugging (conditional on DEBUG). Add a more correct probe for
...
internal video. Clean up nubusprint() a bit.
1995-06-21 02:59:08 +00:00
e4ff96e47c
Make NUBUS_BASE_TO_SLOT and reverse not depend on VA==PA for NuBus.
...
Add constant for DRSW_FARALLON.
1995-06-21 02:57:19 +00:00
6ff2537ad3
Make no assumptions about the absolute address of nubus cards.
1995-06-21 02:52:09 +00:00
cb00a78de3
Treat 0 as a failure case for ae_id_card() and take out
...
null-op check for a 0 addrlist in init.
1995-06-21 02:50:22 +00:00
f462aa095a
Be a bit more careful on the probe... Make sure that the current slot's
...
addresses contain the int_video_start--or assume that internal video is
is "slot" 0xE.
1995-06-21 02:48:00 +00:00
d37674426a
"Always compile before you commit."
1995-06-09 02:19:47 +00:00
90caf013ba
In the interrupt routine, bail out if we've not been initialized, yet.
1995-06-08 12:52:02 +00:00
56b5c26854
Get rid of a printf() that got left behind in the probe.
1995-05-06 18:44:48 +00:00
331e2bd82b
Add some code/defines to differentiate Asante and Interlan/Gator cards
...
correctly with the new nubus code.
1995-05-05 05:40:13 +00:00
59b4da2b39
Add new nubus handling that's much more robust.
...
Update via, if_ae, and grf accordingly.
Revamp grf.
1995-04-29 20:23:36 +00:00
a992a8136c
Add some multicast byteorder-related changes from djh@mulga.cs.mu.OZ.AU.
1995-04-22 12:08:12 +00:00
5982b968a9
Enable nubus interrupts after registering.
1995-04-21 04:01:27 +00:00
6bc53a2398
Handle grf_softc in the config.new manner.
...
Should have been done long ago.
1995-04-21 03:44:13 +00:00
13efb6c197
First pass of KNFication. Needs more.
1995-04-21 02:47:35 +00:00
85025d789c
Prototype iteopen correctly (oversight from a while back...).
1995-04-20 15:46:56 +00:00
a6ba5f8f7e
Update to use softc better and handle mainbus being indirect.
1995-04-20 15:32:01 +00:00
4137a8ff57
Add itetty().
1995-04-20 15:27:43 +00:00
a7f44caf1b
Add a sertty() and update to use ser_softc instead of a bunch of arrays
...
everywhere.
1995-04-20 15:27:12 +00:00
bf68945da5
Define struct ae_ring which is necessary because BYTE_ORDER == BIG_ENDIAN,
...
but the card is in x86 byte order mode because NuBUS does the swap "for us"
on 16- and 32-bit transfers. We should probably figure some way to use
the std struct ed_ring if/when all the 8390 drivers are all fully merged.
1995-04-19 04:46:06 +00:00
2b1a13ab2f
Initialize totlen in ae_put. Thanks to chopps for pointing it out!
...
Also, switch back from using struct ed_ring to using struct ae_ring
because BYTE_ORDER == BIG_ENDIAN, but the card is in x86 byte order
mode because NuBUS does the swap "for us" on 16- and 32-bit transfers.
We should probably figure some way to use the std ed_ring if/when
all the 8390 drivers are all fully merged.
1995-04-19 04:43:36 +00:00
38cb076019
Get this working. Mainly, don't always round to word transfers on
...
receive.
1995-04-16 00:14:54 +00:00
f93fa3c440
Update interrupts to use (void *client_data) instead of (int unit) as
...
parameter to interrupt function.
1995-04-13 04:04:58 +00:00
c9e2e6e2a8
Update to use dev/ic/dp8390.h. Mostly from mycroft.
...
Still get extra data on either transmit or recieve, but want to
checkpoint this work.
1995-04-13 03:58:18 +00:00
2bc91b9c2c
Almost working synch with if_ed.c. Much by mycroft. Fixups by me.
...
Inserts garbage characters--this driver isn't ready for use quite yet.
1995-04-12 15:01:14 +00:00
13dc6a7a07
Make nubus indirect. Duh.
1995-04-12 14:57:40 +00:00
09ba51f21e
Fix typo from last changes.
1995-04-12 14:55:45 +00:00
7114c30418
Use global 8530 defs.
1995-04-11 03:00:38 +00:00
8f8bccf41f
Switch grfmap and grfmmap.
1995-04-10 07:56:46 +00:00
c17558aa9b
Fixup types of a few functions to match if.h structure.
1995-04-08 20:55:26 +00:00
7e4d7125a3
Back to previous version of the serial driver until we can figure out
...
why the new one gets a lot of overflows and doesn't work on the IIsi
or IIvx at all.
1995-04-08 13:20:52 +00:00
870235352d
Print a diagnostic if we do hit the watchdog and recover w/o resetting.
1995-04-08 13:17:55 +00:00
9d7efb1fb0
Do iteon() and iteoff(). Right now, they just clear/draw the cursor and
...
clear the screen. "We" should look at updating these further.
1995-03-26 15:52:21 +00:00
bc14b5cbcc
Don't count video interrupts.
1995-03-25 22:28:30 +00:00
bb035dee62
KERNEL -> _KERNEL
1995-03-23 20:19:16 +00:00
24787aea0e
Add macvideo_intr to handle video interrupts. Currently has behavior
...
that was previously in slot_noint().
1995-03-23 13:45:07 +00:00
129893572f
Serious kludge around network timeouts. Network timeouts seem to be
...
caused by the VIA missing the ethernet slot interrupt. If we get a
watchdog, try calling the via's nubus interrupt function. If that
causes an interrupt, don't reset anything. If it doesn't, use old
behavior (log timeout and reset).
Yuck.
1995-03-23 13:00:05 +00:00
50721bd46f
Raise watchdog timer a tad.
1995-03-01 03:47:08 +00:00
4c34be6b52
Clean up deleted files.
1995-03-01 00:00:00 +00:00
347304eb41
Many changes and updates from Dave Leonard (d@fnarg.net.au) and
...
Brad Parker (brad@fcr.com ). I've been sitting on these for a while.
Notes from Dave:
redocumented z8530 stuff.
Added break ioctls and detection.
Pass framing/parity errors to line discipline.
Added TIOC[SG]FLAG.
Attempt at bringing all chip ops together.
deepended s/w fifos to match chip's.
1995-02-11 19:06:57 +00:00
7190ebb7e0
Set sc_link->openings.
...
Simplification of scsi_cmd from pc532 mods to this driver.
1995-02-01 13:50:42 +00:00
bc36ccab9a
Update for scsi changes. Incl. xs->resid = 0 (thanks Phil).
...
Changes compile, but are not tested.
1995-01-15 06:27:54 +00:00
749ca327c9
Nuke Log in if_aereg.h and remove duplicate (and benign) sc->smem_size
...
assignment from Brad Parker (brad@fcr.com ).
1994-12-04 19:40:14 +00:00
1c47e24828
Mac ROM Glue changes from grantham@tenon.com.
1994-12-03 23:33:55 +00:00
d703fa05aa
At least somewhat functional ethernet driver from Brad Parker
...
(brad@fcr.com ). Requires changes to via.c which are coming with
other changes in a moment...
1994-12-03 23:30:45 +00:00
4e06addf8a
Nuke DEBUG.
1994-12-03 23:26:25 +00:00
2bef12a661
Get rid of private delay().
1994-12-03 14:17:20 +00:00
037951ec4f
Remove private delay() and clean up some odd delay times that we were
...
using...
1994-12-03 14:16:58 +00:00
e054795fb3
"../scsi/*.h" -> <scsi/*.h>
1994-11-29 03:43:52 +00:00
81828a6a38
Boolean goof. (True)
1994-11-29 03:38:48 +00:00
492011ffd7
Modify the serial port initialization slightly so it works on the IIsi.
1994-11-03 16:15:27 +00:00
815a0b9aca
Fix a buglet in computation of fbsize. Pointed out by monroe@cs.pdx.edu.
1994-10-30 13:34:31 +00:00
4fdae7a0ae
new RCS ID format.
1994-10-26 08:45:48 +00:00
93b8f0f095
Change strategy slightly so that serial console is enabled if internal
...
console is not--regardless of the value of the boot-time flag.
Suggested by a question from bit@gnu.ai.mit.edu (jim howard - bit.map).
1994-09-30 00:52:44 +00:00
49e7735666
Actually implement serial boot (console) echo (minor change to ite.c).
...
Remove some old junk in ser.c and implement serial console and serial
boot echo (if serial console's enabled, clear echo).
1994-09-29 03:33:13 +00:00
24de5a9668
Nuke a CVS Log entry. Attribute introspection to Brad.
1994-09-12 21:56:36 +00:00
400d187c01
Remove need for "bounds.h." Brad can still use it if he wants ;-)
1994-09-12 03:54:05 +00:00
5432aef717
Fix a scrolling bug when we have more than 64k to scroll.
1994-09-12 03:38:30 +00:00
183f4c6128
Lots of cleanup. Add functions for serial console--just stubs for now.
...
Fix initialization (for good this time?).
Little things.
1994-08-05 01:27:58 +00:00
08d96f103f
Nuke holdovers from old HP300 console code. Get rid of any reference
...
to serial_boot_echo stuff here.
1994-08-02 17:55:24 +00:00
1c22264669
Make internal video look like a grf device so that desktop and X can use
...
it. GRFIOCMAP modifies addr to include the offset into the screen where
the first pixel is. Not a very clean way to do it -- we should add a
field to grfinfo for offset.
1994-07-31 08:32:47 +00:00
82dcea7759
Fixed bug with bcopy()'ing more than 65535 bytes; initialize d_ttys and cn_tp
...
on itecnprobe(); other minor bug and warning fixes.
1994-07-31 06:45:50 +00:00
639939abca
Clean up deleted files.
1994-07-30 04:21:48 +00:00
774ef66058
Moved adbsys.h grfioctl.h and keyboard.h to include to make desktop
...
and X compile more cleanly.
1994-07-30 04:21:42 +00:00
1b935ff541
Clean up deleted files.
1994-07-24 01:23:20 +00:00
a185489f80
Fixed a few bugs in the key-repeat function and disabled key-repeat
...
when /dev/adb is closed to avoid infinite repeat problem. Brad claims
that he's got this solved in his version...
1994-07-21 06:36:51 +00:00
020b962ae6
Added vt100 emulation and sped up text writing, scrolling, etc.
1994-07-21 06:35:49 +00:00
f954a7b0dd
Make "unknown ioctl" printf ifdef DEBUG and take out an extra comma from
...
the format string.
1994-07-21 03:32:07 +00:00
cc7e76a9a5
Put in a warning message that the driver is non-working and checkpoint
...
with a little bit more debugging stuffage.
1994-07-21 01:33:29 +00:00
db146ec64c
Separate init from serattach and make more machine independent by
...
calculating speed during init (different models of macs feed SCC with
different clocks).
1994-07-21 00:52:47 +00:00
60dc2edc69
Make this into more of a device so it can be probed and attached. Nuke
...
RCS/CVS Log. Make ASCBase an offset instead of an absolute.
1994-07-21 00:44:00 +00:00
f8d560f187
Be somewhat better at machine dependence.
1994-07-10 16:55:53 +00:00
cacf1a1b0a
Cleanup a printf, raise the probe timeout, and notice if the probe
...
does time out.
1994-07-09 17:21:13 +00:00
2ff5938343
Minor hacks to get this to compile for now. ite.c now uses the proper
...
consdev structure to keep itself from crashing...
1994-07-09 06:49:34 +00:00
6cd891192f
Move a function here from the old console.c.
1994-07-09 06:38:55 +00:00
8afa3a3b98
Just a checkpoint. Still not close to working, but TUR works--more docs
...
coming today...
1994-07-08 11:38:48 +00:00
29f12f9bc6
6x10.h: shifted font over by two pixels.
...
keyboard.h: added constants for commonly used keys and reformatted
array so that gcc would be happy.
adbsys.c: new adb system.
bounds.h: bound-checking macros.
ite.c: new built-in mini-console.
8x14.h: no longer used by built-in console.
adb.c: replaced by adbsys.c
1994-07-08 07:55:46 +00:00
782af154d0
Need the extra byte in the temp buffer to avoid overrun in scrollup on
...
wide screens.
1994-07-05 03:48:56 +00:00
d0f0219076
Don't blow up on huge screens.
1994-07-04 23:05:34 +00:00
3410def915
Clean up deleted files.
1994-07-03 04:27:17 +00:00
ebdc074703
Reset sccaddr if we're resetting the video address.
...
Nuke some debugging output.
1994-07-02 13:00:37 +00:00
4ade6821f7
Minor mods. Get rid of constants, or update to use a better default
...
value.
1994-06-26 13:02:41 +00:00
a71a746946
MIN -> min. This needs a lot of work.
1994-06-26 13:01:24 +00:00
03d286dddc
Add some support for the '040 macs which use a different scsi chip. The
...
scsi96 driver is just a skeleton at the moment.
1994-06-26 13:00:32 +00:00
03095bbdd6
Don't assume NuBus is at NBBASE. We might remap it.
1994-06-26 12:59:19 +00:00
bc8e4f3bb2
This should probably be deprecated--minor slash job.
1994-06-26 12:58:13 +00:00
f556898e64
Change some default constants--might be overridden during boot, but
...
correct for MacII-class.
1994-06-26 12:57:27 +00:00
4d47d6a194
Let's not hard-code constants, OK?
1994-06-26 12:56:26 +00:00
397e0acc8d
Missed some warnings...
1994-05-06 17:38:38 +00:00
c22c80abac
Clean up some warnings, mainly w/ timeout().
1994-05-06 03:34:53 +00:00
83e8ab7114
Don't even pay lip service to HPUXCOMPAT, now COMPAT_HPUX.
1994-05-04 05:25:41 +00:00
7d99e03949
Clean out some old printf()s and get rid of MAP_FILE reference.
1994-04-05 01:30:28 +00:00
cd701f50a3
Fixed a few major bugs. add_nubus_intr() was getting the wrong address,
...
and bcopy and bzero were being used. The latter use longs to copy/zero,
and some ethernet cards can't handle longs. I've added bbcopy and bbzero
as a temporary hack, but these should later be added to locore and maybe
changed to use shorts. Still doesn't work: I can now get an interrupt on
the first transmit, but further transmits don't generate more interrupts.
1994-03-20 03:03:26 +00:00
c0d5b28126
Goof. Missed some mods in the changes to config.new a long time ago.
...
Thanks go to kesteloo@cs.unc.edu (Lawrence Kesteloot) for finding this.
1994-03-20 00:14:16 +00:00
10c02ec354
More Dayna separation.
1994-03-01 15:24:25 +00:00
82a0604c37
A little clean-up.
1994-02-27 03:40:26 +00:00
3a18d3b2a5
Cleaned up the probe a little by actually using data from the decl. ROMs.
1994-02-26 03:01:22 +00:00
bd54362375
Bail out in the probe since it's not safe at the moment (hangs on my
...
DaynaPort card). Will fix when I get docs for the card.
1994-02-23 04:39:49 +00:00
ffe153db27
Do a cleaner probe. This still needs lots of work, but will work on
...
reasonable cards...
1994-02-23 04:38:24 +00:00
bb20b67105
Get rid of if_init assignment.
1994-02-22 01:15:00 +00:00
42ad9a0be4
Minor tweaks to prevent hangs and other bad behavior... Needs much more
...
work now that we have more info (Designing Cards and Drivers for the
Macintosh Family Hardware.
1994-02-22 01:11:33 +00:00
2fbb727cb3
Various fixes, changes and so forth by lkestel. Among them should be
...
support for > 1-bit modes (slow...)...
1994-02-22 01:07:40 +00:00
ecfa08e11e
ioctl now takes struct proc *.
1994-02-10 04:30:27 +00:00
de456b165a
Include-cop.
1994-01-30 01:15:31 +00:00
c86a4eb235
Include-cop strikes again.
1994-01-30 01:14:49 +00:00
d110378226
Just playing include-cop.
1994-01-30 01:11:36 +00:00
eb7f152ad2
Fixup includes and prototype stuff. Still need to go back and put in
...
old-style function headers to be pedantic.
1994-01-30 01:10:33 +00:00
df5f6080ef
Change to support config.new and magnum-esque scsi code. Works much
...
more nicely.
1994-01-30 01:08:50 +00:00
8b09474e2e
Clean up deleted files.
1994-01-30 01:07:03 +00:00
a829ad4c4b
Nuke final references to chars.h. It wasn't being used.
1994-01-30 01:07:01 +00:00
71d0f0a1ee
Apply patch as suggested by Theo.
1994-01-24 22:29:40 +00:00
a0bbe77f60
Take out coninit and clean up some warnings.
1994-01-20 23:57:09 +00:00
7ea239d333
Put lun in CDB. Is there be a way to determine when this is really
...
necessary? (It is for some drives).
1994-01-15 03:26:20 +00:00
363cc5e5be
Basic cleanup. Get rid of my_frame for frame.
1994-01-13 12:59:30 +00:00
dfe9897dba
Update grf.h to increment a number of devices when it configures.
...
Fix a small bug in serial.
Both from Brad, Lawrence, and/or Mike.
1994-01-10 23:52:01 +00:00
982b2aa969
Update ethernet driver to use config.new. At least, it's a first stab
...
working from mycroft's magnum changes to if_ed.c.
1993-12-21 03:18:00 +00:00
2390a5c1ee
Add basic sound support and a beeping (instead of flashing) console...
...
from Brad Grantham.
1993-12-21 03:16:01 +00:00
5fd9ddd438
Get rid of IFF_ALTPHYS and hence IFF_LLC0 reference. It doesn't appear
...
to have been used in this driver ;-)
1993-12-15 03:38:20 +00:00
e369bb70b1
Add (semi-bogus?) test to scsi_gen to handle luns in test unit ready
...
commands. W/o this test, some old drives were being identified at
all luns... Also some cleanup and spelling corrections ;-)
1993-12-15 03:17:54 +00:00
924c486826
Clean up deleted files.
1993-12-15 03:10:00 +00:00
34805358dd
Add (broken) support for DDB. Also fix a bug in console that confused the
...
scrollback. Clean up includes a tad.
1993-12-15 03:09:05 +00:00
99fee960e0
Fix includes to use ../mac68k instead of ../mac and add some semi-colons
...
to a couple of default: switches. gcc2 doesn't mind not having them,
but gcc1 sure does.
1993-12-06 04:27:52 +00:00
e99f003a7d
Update to current work in progress. This includes an update to
...
use config.new.
Numerous updates to console so it works better on the SE/30 screen.
Some nice changes from Brad Parker for handling NuBUS and an ethernet
driver that I haven't worked on, yet.
1993-11-29 00:32:22 +00:00
scottr