which bustype should be attached with a specific call to config_found()
(from a "mainbus" or a bus bridge).
Do it for isa/eisa/mca and pci/agp for now. These buses all attach to
an mi interface attribute "isabus", "eisabus" etc., and the autoconf
framework now allows to specify an interface attribute on config_found()
and config_search(), which limits the search of matching config data
to these which attach to that specific attribute.
So we basically have to call config_found_ia(..., "foobus", ...) where
such a bus is attached.
As a consequence, where a "mainbus" or alike also attaches other
devices (eg CPUs) which do not attach to a specific attribute yet,
we need at least pass an attribute name (different from "foobus") so
that the foo bus is not found at these places. This made some minor
changes necessary which are not obviously related to the mentioned buses.
Eliminating redundant pointers in the tables saves nearly 20K (20% of the table
size). In the process, add a pci_findproduct() and make that and
pci_findvendor() return a "const char *".
gets used if nothing else is defined in MD headers,
introduce a "PCI_MACHDEP_ENUMERATE_BUS" CPP definition which can
be used by MD headers (just 1 port atm) to plug in special code
- defer access to interrupt configuration register, as its existence depends on
HDRTYPE.
- add "skip particular funtion in multifunction device" functionality
to quirk table.
- add GEODE/NS SC1100 quirk (now boots on soekris Net4801).
be inserted into ktrace records. The general change has been to replace
"struct proc *" with "struct lwp *" in various function prototypes, pass
the lwp through and use l_proc to get the process pointer when needed.
Bump the kernel rev up to 1.6V
enabled on amd64). Add a dmat64 field to various PCI attach structures,
and pass it down where needed. Implement a simple new function called
pci_dma64_available(pa) to test if 64bit DMA addresses may be used.
This returns 1 iff _PCI_HAVE_DMA64 is defined in <machine/pci_machdep.h>,
and there is more than 4G of memory.
int pci_set_powerstate(pci_chipset_tag_t pc, pcitag_t tag, int newstate)
set power state of the device to newstate.
int pci_get_powerstate(pci_chipset_tag_t pc, pcitag_t tag)
get current power state of the device.
In the future, these functions will be used for ACPI support.
space address and use it where the mappings of the VGA card are registered
before descenting too deep into "memory" type specific code
(pci_mem_find() gets noisy if it doesn't like the register)
NULL for root PCI busses. For busses behind a bridge, it points to
a persistent copy of the bridge's pcitag_t. This can be very useful
for machine-dependent PCI bus enumeration code.
* Implement a machine-dependent pci_enumerate_bus() for sparc64 which
uses OFW device nodes to enumerate the bus. When a PCI bus that is
behind a bridge is attached, pci_attach_hook() allocates a new PCI
chipset tag for the new bus and sets it's "curnode" to the OFW node
of the bridge. This is used as a starting point when enumerating
that bus. Root busses get the OFW node of the host bridge (psycho).
* Garbage-collect "ofpci" and "ofppb" from the sparc64 port.
for a device into two functions:
* pci_probe_device() actually probes/attaches the device specified
by the provide pcitag_t.
* pci_enumerate_bus() enumerates the bus, and calls pci_probe_device()
for each device on the bus. A pci_enumerate_bus_generic() is provided
which implements the old method of doing this: If something found at
dev0/func0, determine number of functions and probe each one.
Machine-dependent code will be able to specify the bus enumeration
routine in the future.
function on all (probed) PCI buses:
int pci_find_device(struct pci_attach_args *pa,
int (*match)(struct pci_attach_args *));
The pci_attach_args structure pointed to by pa is filled in if the
device is found, and 1 is returned. Otherwise 0 is returned.
This function is, unfortunately, needed by the i810 agp code. It's
also of use for LKMs.
Also frob pci_probe_bus to take 2 extra args when used by pci_find_device.
is mapped in a way that is inaccessible by a 32-bit bus_addr_t, then
print a message to that effect and return failure.
Original patches by Bill Studenmund, with a few small changes by me.
of last resort when trying to communicate information about
bogus behaviour of PCI devices to the MI autoconfiguration code.
In general, bogus behaviour should be handled by drivers, but there
are some types of bogons which can't be addressed that way. The
only quirk currently defined is one which indicates that the device
is multi-function even though the device's header says otherwise.
(Mmm, Intel 82371FB PCI-to-ISA Bridge (PIIX); you'd think that at least
Intel would have gotten it right...)
* print all configuration space registers. Then, where possible,
interpret them. (That is, PRESENT ALL THE DATA, then interpret it --
don't hide data behind interpretation. Also, when interpreting
fields, try to print out the specific value that's being interpreted.)
* handle different header types.
* allow caller to specify a function which can interpret the
device-dependent header and is responsible for pretty-printing it.
It spews (use 'options MSGBUFSIZE=...' 8-), but when you want the data,
you really want _all_ of it.
Still needs some cleanup and additional code (e.g. interepretation
of PCI-PCI (type 1) and PCI-Cardbus (type 2(?)) bridge headers).
christos