is
490ccb0747
vm_offset_t -> vaddr_t or paddr_t, as appropriate.
1999-09-25 21:19:48 +00:00
is
75321f3ae6
vm_offset_t -> db_addr_t (mostly), v_addr_t (one place).
1999-09-25 21:11:55 +00:00
is
13021b9955
Avoid calling m_pullup in a few places, where not necessary.
1999-09-25 20:43:43 +00:00
is
c861d2e5d4
Replace leftover vm_offset_t's by paddr_t or vaddr_t, as appropriate.
...
Rename variables/parameters from "va" to "pa" where they are a paddr_t.
Correct DCIAS to take a paddr_t (instead of vaddr_t).
1999-09-25 19:27:35 +00:00
is
f546d949b6
Decouple IP mtu for ARCnet devices from interface MTU.
...
This is important, because for most protocols, link level fragmentation is
used, but with different default effective MTUs. (e.g.: IPv4 default MTU
is 1500 octets, IPv6 default MTU is 9072 octets).
1999-09-25 17:49:27 +00:00
uch
d7e2fcf851
Remove obsolete option MIPS3_FLUSH.
1999-09-25 17:13:27 +00:00
ad
2d7488c2c5
Use px_probe_sram() to figure out ringbuffer size instead of defaulting to
...
the minimum value of 128KB (useful only for PMAG-F).
1999-09-25 14:45:21 +00:00
uch
1a59333e1b
Regen.
1999-09-25 10:52:50 +00:00
uch
3b2be5bbd2
Add Toshiba TX39 CPU and Philips, Compaq model entry.
1999-09-25 10:51:13 +00:00
enami
ed505bdf67
regen.
1999-09-25 09:48:07 +00:00
enami
9f3378ecd4
Add support for Corega EthernetII PCC T. This diff is submitted
...
as PR#8485 by HEO SeonMeyong.
1999-09-25 09:47:13 +00:00
takemura
bc2048a94e
Delete unnecessary comment which was for the variable, 'cold.
1999-09-25 03:09:01 +00:00
thorpej
c999e3ca1a
Add support for the DECchip 21140[A]. This currently only works with
...
boards which use MII for media attachment.
ISV SROM format information lifted from Matt Thomas's `de' driver.
Thanks to Dave Sainty for experimenting w/ his 21140A MII boards, and
for supplying a fix to the MII bit-bang code (PR #8382 ).
1999-09-25 00:27:00 +00:00
shin
06d83cd302
Delete 'cold'.
1999-09-25 00:18:10 +00:00
thorpej
45a337e088
Add a PHY `offset' (e.g. "first PHY on bus, second PHY on bus, ...") to
...
the PHY's softc.
1999-09-25 00:10:13 +00:00
shin
9fd16d4c7b
[new options]
...
options MIPS3_4100 /* VR4100 core */
options MIPS_16K_PAGE /* enable kernel support for 16k pages */
options SOFTFLOAT /* No FPU; avoid touching FPU registers */
1999-09-25 00:03:22 +00:00
shin
44c2553ded
Changes for NetBSD/hpcmips.
...
Support VR4100.
Support 16KB page.
Support CPU without FPU.
Fix virtual alias problem(physio() case).
[new options]
options MIPS3_4100 /* VR4100 core */
options MIPS_16K_PAGE /* enable kernel support for 16k pages */
options SOFTFLOAT /* No FPU; avoid touching FPU registers */
1999-09-25 00:00:37 +00:00
thorpej
c61e95f1f5
Add Tulip ISV-format SROM media block types.
1999-09-24 18:27:22 +00:00
minoura
8da8dfb94f
Could not compile w/ options M68060.
...
Supply -m68030 and -m68851 to the assembler.
1999-09-24 15:31:52 +00:00
jdolecek
1bc1c2815d
cleanup
1999-09-24 15:22:32 +00:00
is
497a2d0eaa
Make this compile without 68060 support. Apparently, nobody has tried this for
...
a long time.
1999-09-24 06:24:34 +00:00
enami
c122d6ab9d
Suggest to upgrade config(8).
1999-09-24 04:52:46 +00:00
nisimura
ffe9ca742d
Add 'sfbreg.h' to the list of files installed in /usr/include/dev/tc/.
1999-09-24 01:01:23 +00:00
nisimura
ff559f77f0
'KB' for kilo-bytes as humanize_number().
1999-09-24 00:37:52 +00:00
frueauf
aa39b12fb0
add missing #include <compat/svr4/svr4_lwp.h>. Ok'd by Klaus Klein.
1999-09-23 16:37:04 +00:00
christos
fcc61fbac4
PR/8443: Yamano-uchi, Hidetoshi: Missing register in IODESC.
1999-09-23 16:09:58 +00:00
tron
dd82f86245
Add Realtek 8129/8139 driver to install kernel as suggested by
...
Patrick Welche in PR install/8477.
1999-09-23 16:09:13 +00:00
minoura
75c422ec6c
Use m68k common cacheops.c.
1999-09-23 15:24:34 +00:00
ws
b47ad60693
Correct handling of extended partitions within extended partitions.
...
Problem found and new program tested by Reinoud.Koornstra@ibbnet.nl .
While here, add support for Linux extended partitions.
1999-09-23 15:21:12 +00:00
minoura
be7984a052
First step toward network boot.
...
By Takeshi Nakayama <tn@catvmics.ne.jp>.
1999-09-23 15:14:57 +00:00
minoura
42b87a3a7d
#ifndef _M68K_CACHEOPS_H_ - #endif.
1999-09-23 15:10:18 +00:00
minoura
536a2060af
Protect some declarations by #ifdef _KERNEL.
1999-09-23 15:06:37 +00:00
kleink
9dfb5a91ec
Minor output formatting buglet.
1999-09-23 11:53:13 +00:00
kleink
d9abf5e332
Add Game Port definitions.
1999-09-23 11:50:19 +00:00
kleink
cef2689773
Oops, we do have to check ourselves whether a given value is valid within an
...
enumeration.
1999-09-23 11:46:12 +00:00
enami
67e874d814
Allow to detach wdc, atapibus, wd and cd.
1999-09-23 11:04:29 +00:00
takemura
8dd0eb62ce
Add timezone info in bootinfo.
...
Delete raw writing 'OK' into frame buffer.
1999-09-23 08:30:58 +00:00
msaitoh
2f74c366d0
Fix RWKREG register reset code in resettodr().
1999-09-23 05:34:03 +00:00
enami
5326516a15
Make this compile without INET6.
1999-09-23 04:02:27 +00:00
itojun
9474edfcd8
cleanup and correct TCP MSS consideration with IPsec headers.
...
MSS advertisement must always be:
max(if mtu) - ip hdr siz - tcp hdr siz
We violated this in the previous code so it was fixed.
tcp_mss_to_advertise() now takes af (af on wire) as its argument,
to compute right ip hdr siz.
tcp_segsize() will take care of IPsec header size.
One thing I'm not really sure is how to handle IPsec header size in
*rxsegsizep (inbound segment size estimation).
The current code subtracts possible *outbound* IPsec size from *rxsegsizep,
hoping that the peer is using the same IPsec policy as me.
It may not be applicable, could TCP gulu please comment...
1999-09-23 02:21:30 +00:00
jdolecek
5fc5120c8e
drop support for pre-104050000 NetBSD
1999-09-22 14:39:53 +00:00
uch
7a074afddc
Change indent. no code changes.
1999-09-22 12:49:48 +00:00
enami
99024b0423
print newline.
1999-09-22 10:03:37 +00:00
enami
c08940c49b
Fix indentation of close curly brace.
1999-09-22 09:51:03 +00:00
tsubai
eb6af46461
Don't set sr[BL] to 1 in cpu_switch().
...
Optimizations.
1999-09-22 08:57:49 +00:00
leo
364d7ca19d
Make sure the pointer to the cpu_label is not NULL before trying to use it.
1999-09-22 07:20:44 +00:00
leo
9251fedf5d
Do not enable VGA cards automatically. Since chances are high that they
...
claim overlapping memory areas. This causes only the 'console' VGA card
to be enabled.
1999-09-22 07:18:45 +00:00
leo
313488aee7
Reverse the order in which PCI cards are scanned. Now the order matches the
...
TOS-scan order. This causes TOS & NetBSD to use the same video card on
a system with multiple VGA cards.
1999-09-22 07:15:43 +00:00
mhitch
fd6f19b057
Correct the clock speed setting: the GPI2 bit is only for the Alpha baseboard
...
TCDS; the TC option card has it's own clock.
Also don't use the TCDSF_FASTSCSI flag to clear fast mode - just rely on the
PROM environment.
1999-09-22 03:32:42 +00:00
mhitch
ba734be86b
Use the correct definition for the Fast Clock bit in cfg3, and set the
...
Fast SCSI bit used by the 53C9x chips.
1999-09-22 03:32:26 +00:00