add81fb25a
New -s option. Arranges for the 64-bit alpha checksum to contain within it
...
an embedded 16-bit sparc checksum and 16-bit sparc magic number.
See also: rev 1.16
1999-09-19 04:54:57 +00:00
9ff31ad0f5
New option: -s
...
.
Makes the 64-bit alpha checksum magically contain an embedded 16-bit
Sun (NetBSD/sparc) compatible magic number and checksum. This is the
last piece in the "boot one disk from alpha, sun, and i386" problem.
.
And for those who told me this had been done before, :-P. It turns out,
it was only done in the collective sense by multi-disk distributions.
1999-09-19 03:19:00 +00:00
e088980de7
Bugfix: Initialize 'hz' to CLOCK_RATE.
1999-09-19 00:46:05 +00:00
fb7795c908
Make sure the HC deactivation is propagated.
1999-09-18 11:25:50 +00:00
d1c5384e9a
Minor optimisation.
1999-09-18 09:45:05 +00:00
500d9b9508
Make the sd, cd and md major numbers match reallity.
1999-09-18 09:42:46 +00:00
7b5b8ca772
Fix a (mostly harmless) NULL de-reference when no boot args supplied.
1999-09-18 09:39:55 +00:00
5e755998cc
Tidy up the ethernet buffer allocation code.
1999-09-18 09:37:35 +00:00
af10a195af
Make sure the '167 phys_seg_list entry for offboard memory is empty.
1999-09-18 09:35:44 +00:00
a96f5614ab
Make this compile again.
1999-09-18 09:26:00 +00:00
9aab9d330a
Make this compile on alpha again.
1999-09-18 05:31:42 +00:00
e6f3bfaa3a
N10's host interrupt register uses low nybble for interrupt cause, not the
...
entire word.
1999-09-18 01:50:24 +00:00
91723eaf32
Regen.
1999-09-18 01:46:25 +00:00
697eb331c5
Ammend some entries.
1999-09-18 01:46:01 +00:00
9002796d07
If the interface is not marked as running, abort tlp_intr() early.
1999-09-17 21:57:36 +00:00
79f938f5f8
Fix a few buglets in the multi-port 21040 code. ZNYX ZX314 confirmed
...
working now.
1999-09-17 21:55:01 +00:00
0d7a86c356
- Centralize the declaration and clearing of `cold'.
...
- Call configure() after setting up proc0.
- Call initclocks() from configure(), after cpu_configure(). Once the
clocks are running, clear `cold'. Then run interrupt-driven
autoconfiguration.
1999-09-17 20:11:56 +00:00
11cae42531
Centralize the declaration and clearing of `cold'.
1999-09-17 19:59:35 +00:00
e9cc963b20
Small optimization.
1999-09-17 15:20:54 +00:00
b3d9b0130c
eliminate unnecessary splnet().
1999-09-17 12:26:04 +00:00
7bf9aa0fdf
s/ _MMEYE_H_/ _MMEYE_MMEYE_H_/
1999-09-17 12:16:37 +00:00
6cf532dd3d
Synchronize with fixed libc version:
...
If unsigned dividend > INT_MAX, or signed dividend == INT_MIN, be careful
to not overflow the divisor when shifting it to the left.
1999-09-17 11:42:56 +00:00
adc175c443
check SCI(F)CONSOLE
1999-09-17 01:23:00 +00:00
4a175ef57d
options SCICONSOLE
...
options SCIFCONSOLE
1999-09-17 01:21:40 +00:00
54943e8584
- Collapse forward and reverse cases in rasops_copyrows() into one
...
- Pull in opt_rasops.h so we know if clipping is enabled
- Some KNF
1999-09-17 00:22:07 +00:00
da0cbab431
Clean up attribute allocation some more.
1999-09-17 00:09:34 +00:00
9af0f68f52
- set nkpde from IOM_RAM_SIZE
...
- remove MMEYE_LED
1999-09-16 22:52:11 +00:00
97a24aa488
Make defines follow the standard.
1999-09-16 21:53:58 +00:00
4014b40eb8
cleanup
1999-09-16 21:39:24 +00:00
3323319940
add "device fdc {drive = -1}" for pcmcia
1999-09-16 21:31:29 +00:00
5a99c25885
sync with mmeye
1999-09-16 21:23:40 +00:00
29a76c3593
fix mask_irq() and unmask_irq() for SH7750
1999-09-16 21:22:40 +00:00
fd0dba8d22
sync with bscreg.h
1999-09-16 21:20:20 +00:00
31f498776d
add "device fdc {drive = -1}" for pcmcia
1999-09-16 21:18:55 +00:00
f921a6e9c5
sync with tmureg.h
1999-09-16 21:17:46 +00:00
9211d6bed4
sync with sci*.h and tmureg.h
1999-09-16 21:17:26 +00:00
d9a70fd1dc
cleanup
1999-09-16 21:15:36 +00:00
61ab682f29
set baudrate before talking to the keyboard (in non-console case)
...
from Konrad Schroder per PR port-alpha/8422
1999-09-16 19:39:05 +00:00
a4457e18b3
More DIAGNOSTIC paranoia.
1999-09-16 19:20:34 +00:00
75d8e5904a
Regen
1999-09-16 18:19:11 +00:00
36140f8037
fix olseek botch
1999-09-16 18:18:28 +00:00
61cf56ebf2
introduce new variable wsdisplay_defaultscreens (initialized to
...
WSDISPLAY_DEFAULTSCREENS or 0 if it's not defined) and use it instead
of WSDISPLAY_DEFAULTSCREENS as approptiate, so that number of screens
added on bootup is patchable
move printing of info about added screen into separate routine and
print just one message for all screens added in wsdisplay_common_attach(),
such as:
wsdisplay0: screen 1-7 added (80x25, vt100 emulation)
while here, do minor const poisoning
Reviewed by: drochner
Tested by: jdolecek
1999-09-16 18:16:51 +00:00
458fefc5ad
Compile the kernel for SHARKs optimized for strongarm.
1999-09-16 16:49:49 +00:00
99ca8c39f5
unused file (we have an asm version)
1999-09-16 15:04:13 +00:00
b9604a3f30
make this compile again after PMAP_NEW cleanup.
1999-09-16 14:52:06 +00:00
7977bd843d
enclose tlbflush(), disable_intr() and enable_intr() with #ifder _KERNEL
1999-09-16 14:42:27 +00:00
15a7aff6f8
Sync (hp300).
1999-09-16 14:40:21 +00:00
6f19920b47
Rename the machine-dependent autoconfiguration entry point `cpu_configure()',
...
and rename config_init() to configure() and call cpu_configure() from there.
1999-09-16 14:37:47 +00:00
da2dab0c10
Finish PMAP_NEW.
...
- Wrong argument to pmap_kremove (vm_machdep.c:pagemove()).
- Uninitialized variable (pmap.c:pmap_kremove <- this should be fixed long ago...)
1999-09-16 14:35:42 +00:00
224d34b5e1
remove sh3/include/mmeye.h
1999-09-16 13:32:24 +00:00
ffbd08b126
remove extra Id
1999-09-16 12:48:35 +00:00
814f6b8936
add NetBSD RCS ID
1999-09-16 12:48:06 +00:00
db2b0adebd
Import NetBSD/hpcmips source files from hpcmips repository.
...
file list:
sys/arch/hpcmips/
distrib/hpcmips/
etc/etc.hpcmips/
lib/libc/arch/mips/fplib/
lib/libc/arch/mips/fplib/Makefile.inc
lib/libc/arch/mips/fplib/environment.h
lib/libc/arch/mips/fplib/fplib_glue.c
lib/libc/arch/mips/fplib/fplib_libc.c
lib/libc/arch/mips/fplib/hpcmips-gcc.h
lib/libc/arch/mips/fplib/softfloat-macros.h
lib/libc/arch/mips/fplib/softfloat-specialize.h
lib/libc/arch/mips/fplib/softfloat.c
lib/libc/arch/mips/fplib/softfloat.h
lib/libc/arch/mips/gen/ieee.h
lib/libc/arch/mips/gen/sf_fabs.c
lib/libc/arch/mips/gen/sf_flt_rounds.c
lib/libc/arch/mips/gen/sf_fpgetmask.c
lib/libc/arch/mips/gen/sf_fpgetround.c
lib/libc/arch/mips/gen/sf_fpgetsticky.c
lib/libc/arch/mips/gen/sf_fpsetmask.c
lib/libc/arch/mips/gen/sf_fpsetround.c
lib/libc/arch/mips/gen/sf_fpsetsticky.c
lib/libc/arch/mips/gen/sf_isinf.c
lib/libc/arch/mips/gen/sf_ldexp.c
lib/libc/arch/mips/gen/sf_modf.c
1999-09-16 12:23:18 +00:00
f7fd8ced64
Remove FP-emulation from the TT-kernel. All TT's should have an FPU.
1999-09-16 12:00:04 +00:00
b9b9cc8cb9
Make this compile again.
1999-09-16 11:58:49 +00:00
6c591e77d0
Fix botched RCS IDs.
1999-09-16 05:58:18 +00:00
e8a86fe7eb
Include <lib/libkern/libkern.h> instead of <sys/systm.h>.
...
(the former no longer has mem* prototypes).
Remove the b* vs mem* kludge.
This change allows standalone libkern to build on alpha again.
1999-09-16 00:06:46 +00:00
6266379c9d
Be slightly more informative in the tsleep() diagnostics.
1999-09-15 21:54:57 +00:00
09774ca21c
Remove one, add none!
1999-09-15 21:14:44 +00:00
2557320246
Handle the case when a USB transfer is so long that it crosses two page
...
(4K) boundaries. OHCI cannot do that with a single TD so we make a chain.
1999-09-15 21:14:03 +00:00
7fcc1703ff
Cosmetic change: s/xfer/data/
1999-09-15 21:12:29 +00:00
80e09c28e9
Use a bigger buffer when transferring data.
1999-09-15 21:11:27 +00:00
58c7de99c1
Move the code around a little and clearly mark how to delay attachment
...
(during cold boot) until the interrupts are on.
1999-09-15 21:10:11 +00:00
5260cadff2
Add a sanity check to the computed actual transfer length.
1999-09-15 21:08:59 +00:00
d4f0eac72e
Change SPLUSBCHECK diagnostic macro a little.
1999-09-15 21:08:19 +00:00
f5050d025a
We only need the ether_ipmulticast_min and _max addresses if we have INET
...
compiled in.
1999-09-15 20:48:19 +00:00
e8431098fe
Add a mechanism to defer configuration of children until interrupts
...
are enabled.
1999-09-15 19:37:08 +00:00
8995425278
Prototype cpu_configure().
1999-09-15 19:35:53 +00:00
3b01d1b872
Rename the machine-dependent autoconfiguration entry point `cpu_configure()',
...
and rename config_init() to configure() and call cpu_configure() from there.
1999-09-15 18:10:33 +00:00
e54df1b10c
Handle the use_polling flag with a lttle more care and only set it if
...
we are cold booting.
1999-09-15 14:17:14 +00:00
60199e09b6
Regen.
1999-09-15 13:57:26 +00:00
df70e460db
Make vendor names more consistent.
1999-09-15 13:57:09 +00:00
adc55421b4
Regen.
1999-09-15 12:31:28 +00:00
f14a3915b3
Add a number of devices and rename a few. From a Linux web site.
1999-09-15 12:30:59 +00:00
7049e8eb1b
Add preliminary (untested) code for detaching the USB host controller
...
(needed for CardBus based controllers).
1999-09-15 10:25:30 +00:00
a1ab30136f
Use MI loadfile.
1999-09-15 09:47:19 +00:00
f23c7a31b4
Make sure 21040 chips are at least pass 2.0 and that 21140 chips are at
...
least pass 1.1.
1999-09-14 23:43:10 +00:00
70997fd3d5
Move the PCI device number to the base Tulip softc; it will be needed to
...
decode the SROM on 21041 and 2114x multi-port boards.
1999-09-14 23:33:04 +00:00
2def4fdb50
Apparently can't really look at excessive collitions and late collisions
...
in completed transmit descriptors. These seem to be set even on successful
packet transmissions on my AlphaStation 500's 21040.
1999-09-14 23:23:32 +00:00
5c34356d4c
First crack at shared ROM/shared interrupts on 21040 multi-port boards,
...
plus quirk identification for non-multiple-port boards.
1999-09-14 22:25:48 +00:00
5486205b69
Regen.
1999-09-14 22:06:44 +00:00
ed9b74f17a
Sort out some confusion about which vendor is really Belkin.
1999-09-14 22:06:21 +00:00
3bfa86cbc0
fix breakage from PMAP_NEW cleanup.
1999-09-14 17:11:45 +00:00
67f4885c8c
Sync with -current.
1999-09-14 11:21:26 +00:00
17dc484c1c
Sync with -current.
...
XXX root on nfs don't work, though root on wd0 works well.
1999-09-14 11:20:52 +00:00
40905bd3ec
Catch up with -current.
1999-09-14 10:22:34 +00:00
a6aa488db9
Don't do IO before we have set the tag and handle.
1999-09-14 09:29:05 +00:00
e2a320f925
Oops, fix Winbond regshift.
1999-09-14 05:59:53 +00:00
d05d28146b
EISA bus front-end for the New Tulip Driver, for the DEC DE425 EISA
...
board. The DE425 is basically a DECchip 21040 on an EISA board, plus
a Cool Address Decoder Hack which maps the PCI configuration
space registers into EISA I/O space, interleaved with the Tulip CSRs,
which are spaced further apart than on the PCI versoin.
This is currently *untested* until the DE425 boards that folks have
promised me arrive. But, it should work, since the 21040 works.
1999-09-14 05:58:00 +00:00
12c167b5ca
Change the semantics of `sc_regshift'; it is now the shift required to
...
make a CSR index number into a CSR offset. Introduce a couple of macros
to handle CSR name -> offset conversion.
1999-09-14 05:52:21 +00:00
29df848753
Need <string.h> for memcpy(3) prototype if building from userland.
1999-09-14 04:50:54 +00:00
10d4a4d5fe
And commit two files I forgot in the rearrangement for testing for
...
interrupt context.
1999-09-14 01:07:13 +00:00
a03bd733ca
- More PNIC NWAY stuff. Still more work to do, here.
...
- Fix the SROM checksum routine.
- Add code to parse the old DEC Address ROM SROM format.
- Rearrange the statchg routines a bit, to make them consistent with one
another.
- Add support for the DECchip 21040. XXX No support for media autosense
yet, and no support for any of the multi-port boards yet.
1999-09-14 00:55:38 +00:00
c4d6d6b991
Put a reference counter in the softc. Without this the driver might access
...
data that has been freed because the detach() routine returns to early.
1999-09-13 21:35:08 +00:00
ba2c2e2ade
* Make sure an aborted pipe is marked as not running.
...
* Start queued request in the right order.
* Insert some more DIAGNOSTIC sanity checks.
1999-09-13 21:33:25 +00:00
df6f3652dd
ntfs_mountfs(): only print warnings iff NTFS_DEBUG
1999-09-13 20:21:45 +00:00
5f94d21164
Fix typo in "#ifdef" in ie_read_frame() which prevented Berkeley Packet
...
Filters from working correctly. Fixes PR port-arm32/8343 by
Richard Earnshaw.
1999-09-13 20:17:35 +00:00
bc5da9a8da
Make sure timeouts count as interrupt context too.
1999-09-13 19:49:41 +00:00
ff6a476e6c
Rearrange the code a little so we can decide if we are in process
...
or interrupt context in a reliable way. Mainly used for DIAGNOSTIC.
1999-09-13 19:18:17 +00:00
427928b3a1
add some comments.
1999-09-13 19:13:09 +00:00
7a7f9c0763
sh3/sh3/ -> sh3/dev change
1999-09-13 17:14:42 +00:00
ac3fe6d372
remove mainbus pseudo floppy drive
1999-09-13 16:26:17 +00:00
14971ca02a
add local def for CXX.
1999-09-13 15:50:01 +00:00
6b9bfc0691
- Call in{,6}_pcbdetach if ipsec initialization is failed during PRU_ATTACH.
...
This situation happens on severe memory shortage. We may need more
improvements here and there.
- Grab IEEE802 address from IFT_ETHER card, even if the card is
inserted after bootup time. Is there any other card that can be
inserted afterwards? pcmcia fddi card? :-P
- RFC2373 u bit handling suggests that we SHOULD NOT copy interface id from
ethernet card to pseudo interface, when ethernet card has IEEE802/EUI64
with u bit != 0 (this means that IEEE802/EUI64 is not universally unique).
Do not use such address as, for example, interface id for gif interface.
(I have such an ethernet card myself)
This may change interface id for your gif interface. be careful upgrading
rc files.
(sync with recent KAME)
1999-09-13 12:15:54 +00:00
8a72d1850e
add compilation directory.
1999-09-13 10:45:30 +00:00
65363da25e
Merge in NetBSD/sh3 from cvs.kame.net repository.
...
Tree structure:
- sys/arch/sh3: sh3 generic code
As commented, in-chip device drivers are put into sys/arch/sh3/dev.
- sys/arch/evbsh3: sh3 evaluation boards (pure sh3 CPU, no fancy external HW)
- sys/arch/mmeye: Brains mmEye, www.brains.co.jp
MI source code includes couple of #ifdef for sh3-coff support.
(sh3 uses coff or elf)
Needs some more improvements, especialy in sys/arch/sh3/conf/files.sh3,
to compile the tree (due to last minute tree structure change).
1999-09-13 10:30:21 +00:00
eddd4afb9c
Fix compile errors when ARM700BUGTRACK is defined.
1999-09-13 06:17:27 +00:00
a212e2ddf3
Add ess plug and plug audio device.
...
Add wsmux device.
Add placeholders for more PCI cards.
1999-09-13 05:19:45 +00:00
e0042cf412
drop wrongly looped back multicast packet before we put it into BPF.
1999-09-12 18:26:58 +00:00
eadd0f76da
Add needs-flag to ukbd. Fixes PR 8385 from Izumi Tsutsui
...
<tsutsui@ceres.dti.ne.jp>.
1999-09-12 17:40:57 +00:00
8afb0d9308
pull-in <sys/mount.h> for definition of struct netexport
1999-09-12 16:41:05 +00:00
b1a719a6cc
Add a flag in the request to determine if the data copying is done by the
...
driver or the usbdi layer.
1999-09-12 08:23:42 +00:00
305998532f
Dot't forget to deactivate subdevices.
1999-09-12 08:21:49 +00:00
febf7ffb86
Display more verbose information about the command protocol and wire
...
protocol used by the device, e.g.:
umass0 at uhub0 port 1 configuration 1 interface 0
umass0: Iomega USB Zip 100, rev 1.00/1.00, addr 2
umass0: SCSI over Bulk-Only (iclass 8/6/80)
1999-09-12 02:40:59 +00:00
f3a668ed84
eliminate the PMAP_NEW option by making it required for all ports.
...
ports which previously had no support for PMAP_NEW now implement
the pmap_k* interfaces as wrappers around the non-k versions.
1999-09-12 01:16:55 +00:00
f696794a34
Hot-unplug works now.
1999-09-11 21:45:28 +00:00
f77302e768
Implement detaching SCSI and ATAPI disks.
1999-09-11 21:42:58 +00:00
e8dded5513
Implement a function to kill off all commands pending for a given
...
scsipi_link.
1999-09-11 21:39:53 +00:00
5116cf4fa5
Implement detaching of SCSI busses.
1999-09-11 21:25:26 +00:00
f7c20484b6
- If a command fails, assume the device returned CHECK CONDITION status,
...
and issue a REQUEST SENSE. This fixes the media change problems I was
having w/ my USB ZIP drive.
- Clean up some debugging code.
- Implement more hot-unplug stuff.
1999-09-11 20:52:07 +00:00
1ec1b491a9
Argh, actually commit the update of ntfsmount structure for NFS
...
export support, so that it actually compiles.
Thanks Lennart!
1999-09-11 15:55:12 +00:00
afa103cfb4
Rewrote error handlers. Now they are solid.
...
Increesed considerably the speed of the driver removing superfluous splbio/splx functions.
1999-09-11 15:34:45 +00:00
ca8281fbcc
Pre-allocate the DMA buffer. This makes the driver slightly more efficient.
1999-09-11 10:40:07 +00:00
98b6524413
* Move DMA buffer allocation to HC independent code.
...
* Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN.
1999-09-11 08:19:26 +00:00
203f000d1a
Regen.
1999-09-11 06:27:36 +00:00
dfbe7449e4
Add ENI SpeedStream.
1999-09-11 06:27:25 +00:00
34b45d9bd7
Obey negative cache entries for intermediate directories during a create.
1999-09-10 23:24:23 +00:00
1a3995bac1
In apciparam() in the ospeed == 0 case, actually set the cfcr to the new
...
value.
1999-09-10 22:49:33 +00:00
6a58ae2d93
Regen.
1999-09-10 19:56:51 +00:00
fb9d7d86ae
Add more TI CardBus bridges. Taken from the CardBus patches.
1999-09-10 19:55:54 +00:00
90daa4736b
Comment out the GET_DEVICE_ID code, because for some unknown reason it
...
causes printing to fail sometimes.
1999-09-10 19:28:26 +00:00
993576f366
mountroot support written, need to really implement sync support and
...
add support for NTFS to libsa
1999-09-10 17:32:17 +00:00
dee4a028e7
actually implement ntfs_mountroot()
1999-09-10 17:30:08 +00:00
2c0e7cf113
allow to set boot timeout and password, following PR port-i386/8196
...
by Stephan Thesing
1999-09-10 16:45:27 +00:00
3e60c834ed
install /boot -r-------- for security reasons
1999-09-10 16:41:10 +00:00
4486b15211
-make ustarfs optional (enabled per default) for cases where space is
...
scarce
-make the boot timeout patchable
-optionally, call checkpasswd() before the boot menu can be accessed
(The latter 2 follow PR port-i386/8196 by Stephan Thesing.)
1999-09-10 16:38:46 +00:00
5c48b9a115
improve awaitkey()'s printout for >9 seconds
1999-09-10 16:23:55 +00:00
d779b91513
make NTFS NFS exportable - that also means getfh(2) and other syscalls
...
using filehandles should work now for NTFS filesystem
some other misc cleanup
1999-09-10 16:14:02 +00:00
ff171dfb67
-don't use DEFS.h nor SYS.h in libkern
...
-remove setjmp.S, it's not useful for libkern
1999-09-10 15:39:04 +00:00
2d8e6b7e97
Add prototype for memcmp() as suggested by Anders Hjalmarsson in
...
PR kern/8360.
1999-09-10 14:05:40 +00:00
7148323ba0
sync with libc
1999-09-10 13:21:14 +00:00
3e7102ecac
Don't flush more than necessary. By Richard Earnshaw in PR 8132.
1999-09-10 10:12:09 +00:00
2914ef7fd2
sync with changes to if_fxp header,
...
thanks to <ks@ub.uni-mainz.de> for testing
1999-09-10 09:12:44 +00:00
132d930986
Fix printf format (see PR#8358).
1999-09-10 08:42:58 +00:00
f468c5f199
This is required by libsa/loadfile.c.
1999-09-10 07:33:57 +00:00
e66e48676c
Nuke the alpha ecoff/elf bootloader and use the libsa/ one instead.
1999-09-10 07:31:16 +00:00
54ab5cdc54
* Fix the volume zero recognition bug; it was interacting with a
...
feature to avoid rereads (which was added to work around bugs in
old SRM versions that wouldn't rewind DATs, but would return no
error on rewind callbacks)
* Initialize the volzero signature in ustarfs_open(), rather than as a
side effect of the first read.
* Centralize error retry.
1999-09-10 07:22:03 +00:00
fd8040a031
s/acknowledgment/acknowledgement/
1999-09-10 03:24:14 +00:00
770a224d1e
fix ipcomp behavior against -R to meet documentation.
...
From: Laine Stump <lainestump@rcn.com>
1999-09-10 02:05:24 +00:00
f5e553eb57
IPv6 support.
...
ETHERTYPE_IPV6 packets are encapsulated by RFC1042 encap.
Tested with Japanese card, with WaveLan bridge (wiconfig -p 1).
NOTE: I dunno if encapsulating IPv6 packets by RFC1042 is the correct way,
as RFC1042 only defines behavior for ETHERTYPE_{IP,ARP,REVARP} packets.
Since WaveLan bridge encapsulates IPv6 packets with RFC1042, we have no
choice.
Gather joined multicast addresses via SIOCADDMULTI, and configure multicast
filter properly. This is also required for IPv6 support
(which heavily depends on multicast).
Fix IFF_RUNNING management
- to prevent IFF_RUNNING from raised on "wiconfig", before "ifconfig up"
- to prevent the driver from occupying extra interrupts on "ifconfig up",
then "down", then "up".
1999-09-10 00:30:59 +00:00
ross