786dc5161c
Clarify RX status header length and some cosmetics.
2000-11-30 15:51:57 +00:00
fd4d074b27
After rev 1.16 rtk driver uses the CRC from the chip,
...
so no need to adjust Rx address for it. Fixes kern/11301.
2000-11-30 15:33:04 +00:00
64222ad03a
Fix some printf formats, and remove SPARC-specific debugging stuff.
2000-11-30 14:41:46 +00:00
6b1add13dc
sync netbsd32_execve() with sys_execve() - this involves
...
VMCMD_RELATIVE support, couple of debugging printfs and addition of
doexechooks() call
also fix one FREE() which should be free()
2000-11-30 12:54:38 +00:00
32b19479ca
Drastically reduce PAGER_MAP_SIZE so we don't run out of KVM so soon.
2000-11-30 12:16:00 +00:00
33999a4224
Move uvm_pgcnt_vnode and uvm_pgcnt_anon into uvmexp (as vnodepages and
...
anonpages), and add vtextpages which is currently unused but will be
used to trace the number of pages used by vtext vnodes.
2000-11-30 11:04:43 +00:00
7006bcd449
Fix two cases of reversed arguments to printf();
2000-11-30 09:58:03 +00:00
d324e2eb55
in nfs_open(), initialize the write creds if we're opening for writing.
...
otherwise we would never set them if we only modify the file via mmap().
2000-11-30 07:24:12 +00:00
99a39489d8
Pass the right size of object (in this case, a trailer) to fwohci_buf_pktget.
...
Since the fp_trail is a pointer to trailer, we have to pass sizeof(*fp_trail)
instead of sizeof(fp_trail).
2000-11-30 06:59:08 +00:00
a89beb967d
Make this file compiles on alpha even if FW_DEBUG is defined.
2000-11-30 06:42:26 +00:00
4792308b32
Pass the right max segment size to bus_dmamap_create.
2000-11-30 06:36:43 +00:00
3077a68aa3
Reduce UPAGES from 3 to 2.
2000-11-30 02:55:50 +00:00
9e7aa98aa6
Add TAG QUEUE support to the ncr53c9x driver.
2000-11-30 00:19:25 +00:00
7d3a48b31d
recognize ^if and ^endif in input master syscall file specially - output it
...
like #if and #endif to sysdcl; this can be used to insert ifdefs
to generated *sysent.c
2000-11-29 22:09:05 +00:00
73f3cd8c7e
LKMify
2000-11-29 21:51:49 +00:00
7924882d2e
remove unneded opt_compat_osf1.h stuff
2000-11-29 21:50:49 +00:00
14f5ab8928
ANSI'ify.
2000-11-29 18:22:17 +00:00
e4bfefe7bd
Make spl functions no-inline. This saves size and even it runs faster on
...
some systems.
2000-11-29 17:55:52 +00:00
0bbc767215
Adjust the ramdisk size.
2000-11-29 14:45:27 +00:00
9cdf00b4bb
remove rules for genassym.c, it's no longer pertinent
2000-11-29 13:02:51 +00:00
0e8ae0e54a
convert to use common genassym.cf
2000-11-29 12:55:11 +00:00
972c941cf6
Fix typo in comment reported by Tetsuya Isaki in kern/11587.
2000-11-29 12:49:56 +00:00
7dc077e6f5
Change UPAGES from 3 to 2. (sync with hp300)
2000-11-29 12:32:06 +00:00
5deecf29d2
Fall back to previous memory segments detection code if BIOS reports no
...
correct memory segment.
This prevents some systems from losing with `can't find end of memory'.
Discussed with Bill Sommerfeld.
2000-11-29 09:56:02 +00:00
3c1b8a2b35
Add a vm.uvmexp2 sysctl that uses a ABI-safe 'struct uvmexp_sysctl'.
2000-11-29 09:52:18 +00:00
614e494d9e
Add register prefixes.
2000-11-29 09:18:32 +00:00
930411f925
Missed a couple of register prefixes...
2000-11-29 09:11:53 +00:00
fecb49d172
Add register prefixes.
2000-11-29 09:09:39 +00:00
5f3a256833
Allocate the DMA windows out of the PCI memory extent map after
...
DMA is initialized.
2000-11-29 06:30:09 +00:00
96294f7b26
Do the additional PCI memory initialization after configuring DMA.
2000-11-29 06:29:10 +00:00
8f20972db2
Revert previous -- we'll do it differently.
2000-11-29 06:21:12 +00:00
d615083897
The AMD 751 doesn't have DMA windows, so allocate the RAM out of the
...
PCI memory extent map. Bad things will happen if we try to assign
a device where RAM is mapped into PCI space.
2000-11-29 05:56:49 +00:00
8ebabb1aae
Increase the number of static extent descriptors from 8 to 16,
...
and add a means for calling a chip-specific init hook.
2000-11-29 05:53:29 +00:00
435b4c7b35
Fix c896 support. If the first mem bar is 64bit, then the second one will
...
be too. And offset for the 2nd being after the 1st by a 64-bit bar, not
32-bit.
2000-11-29 02:00:38 +00:00
aa77dea4c2
No need to play silly name trickery when we know we're talking about
...
64-bit ELF binaries.
2000-11-28 21:58:12 +00:00
366b23111a
Make sure values for a %llx are long long.
2000-11-28 21:44:34 +00:00
f9450fa993
Put neo* in alphabetical position.
2000-11-28 19:44:07 +00:00
054819083c
Restore the top level `callout' command.
2000-11-28 19:27:46 +00:00
6a7e0164dd
Implement db_show_callout() again.
2000-11-28 19:20:37 +00:00
454f740bd4
Use AC97_REG_* constants rather than defining them ourselves.
2000-11-28 16:57:16 +00:00
997701c6c1
Define additional AC'97 registers.
2000-11-28 16:54:17 +00:00
94f7c9c6f9
Sync with libc: make function exit one instruction faster, and function one
...
instruction shorter (Horimoto).
2000-11-28 15:26:34 +00:00
51858ad725
backout part of execsw/LKM changes: netbsd_elf32_signature() is used by
...
the compat/netbsd32 code so de-static it again.
2000-11-28 13:10:41 +00:00
87650daf07
make this compile again, after execsw/lkm changes.
2000-11-28 13:07:27 +00:00
b4e53bf009
wrap newly introduced >80 char lines.
2000-11-28 12:24:34 +00:00
92f11ef3d3
BUG FIX: change enable sequence for 16-bit pcmcia cards. This change
...
provides better (not perfect) reset sequence. The most significant
change is asserting output enable reg before power up. Stop routing
interrupt during reset.
2000-11-28 09:11:36 +00:00
3f877e127e
Add auich(4) and neo(4).
2000-11-28 05:18:42 +00:00
443bd6369f
Device driver for the built-in audio on Intel ICH, ICH0, ICH2,
...
and i440MX chipsets. Based on a driver by Michael Shalayeff,
modified somewhat by me to use bus_dma properly, and fix some
audio encoding emulation bugs.
Thanks to Manuel Bouyer for testing and feedback.
2000-11-28 05:12:29 +00:00
2eabb2676b
We do not use INSTALL_SMALL any more.
2000-11-28 03:18:18 +00:00
c8071d4fac
Sync with libc strncpy.S 1.11: optimized code by Hiroshi Horimoto.
2000-11-27 22:38:33 +00:00
f6a7e12165
split linux signal code off locore.s
2000-11-27 22:29:26 +00:00
872ef3b1fb
don't use linux_emuldata for now, so that this compiles after
...
rev 1.2 of compat/linux/common/linux_emuldata.h
2000-11-27 22:23:09 +00:00
1aa6c9fb10
Add prep support. change all __foo__ to foo. We don't __foo__ in the kernel
2000-11-27 21:51:02 +00:00
37ca010efd
Add generic ISA floppy support
2000-11-27 21:50:13 +00:00
67e67ac7dc
Replace the (no longer working) check for tp->t_line == 0 with
...
tp->t_linesw == linesw[0]. Hopefully this is correct.
2000-11-27 18:39:04 +00:00
e9037d16c5
allow building without SOFTDEP by adding the pageiodone hook to bio_ops.
2000-11-27 18:26:38 +00:00
e650ecc818
prototype netbsd_elf64_probe() ifdef EXEC_ELF64, not for if !defined(EXEC_ELF32)
2000-11-27 18:04:32 +00:00
d9f0dcbe03
adapt to execsw[] changes
2000-11-27 17:25:24 +00:00
414f0ac116
netbsd32 emulation doesn't exec 64bit binaries
2000-11-27 17:21:22 +00:00
5cbf7c7a23
No longer needed. We use MI version now.
2000-11-27 17:04:13 +00:00
a23d349584
Use MI md_root.c
2000-11-27 17:03:12 +00:00
6ca08c284e
More fixes for linesw changes.
2000-11-27 15:28:41 +00:00
6c33654882
Add declarations of hpux_setregs() and struct emul emul_hpux.
2000-11-27 15:26:17 +00:00
0562490a63
Change base address to 0x800000.
2000-11-27 14:41:47 +00:00
cd9bcb98dc
Undo most of rev 1.94 to make a.out emulation work again.
2000-11-27 13:31:18 +00:00
936191481d
Prepare cpu_exec_ecoff_probe() for mips which just returns ENOEXEC,
...
as per discussion on tech-kern.
2000-11-27 13:25:24 +00:00
e5c94432d1
Reduce PAGER_MAP_SIZE to 4MB.
2000-11-27 11:37:33 +00:00
43a02b2507
1.5L - UBC!
2000-11-27 09:43:49 +00:00
69ad0d84c0
regen.
2000-11-27 09:04:59 +00:00
02aaf95f67
BUG FIX: pccbb turns off PC Cards' power on the bus in shutdown hook.
...
Some machines cannot reboot without this fix.
2000-11-27 09:04:32 +00:00
cdc7cdbcde
Back out the change of the way to grab proc0's USPACE. It produces
...
kernel lock up in mach_init() by a reason unknown to me.
2000-11-27 08:57:08 +00:00
66864e1f05
Removed increased BUFCACHE/BUFPAGES.
2000-11-27 08:55:41 +00:00
52e9098c1d
arch/mips is used now.
2000-11-27 08:54:02 +00:00
70e44cf083
Rework bus_space to conform the PReP I/O & MEM limits. Add a few debugging
...
printfs concerning interrupts.
2000-11-27 08:53:54 +00:00
aeda8d3b77
Initial integration of the Unified Buffer Cache project.
2000-11-27 08:39:39 +00:00
c29a1b4461
allow ports to override PAGER_MAP_SIZE in machine/vmparam.h.
...
some ports (such as arm32) don't have enough KVA for the
increased default size once the UBC mapping is also present.
2000-11-27 08:19:50 +00:00
1ec37ad27a
use queue.h macros and KASSERT().
2000-11-27 07:47:42 +00:00
a5dad0db13
Correct a few cpu/fpu ids.
2000-11-27 06:38:54 +00:00
fdfe3556de
Use only one TLB entry to wire down process's USPACE since it's
...
now guranteed to be aligned on 8KB boundary in kernel virutal
address. Retain one more free TLB entry.
2000-11-27 06:37:32 +00:00
d800267698
Forgot to commit bounds_check_with_label().
2000-11-27 06:00:09 +00:00
38a44e0d8f
Consistently use pmap_steal_memory() to allocate USPACE.
2000-11-27 05:57:25 +00:00
05960017b2
Fix an typo by cut'paste work in the previous change.
2000-11-27 05:17:06 +00:00
f6562a41a3
Use pmap_steal_memory() to glab proc0's USPACE.
2000-11-27 05:12:32 +00:00
10571faa84
Introduce uvm_km_valloc_align() and use it to glab process's USPACE
...
aligned on USPACE boundary in kernel virutal address. It's benefitial
for MIPS R4000's paired TLB entry design.
2000-11-27 04:36:40 +00:00
0055236dda
If LFS_DO_ROLLFORWARD is defined, roll forward from the older checkpoint
...
on mount, through the newer checkpoint and on through any newer
partial-segments that may have been written but not checkpointed because
of an intervening crash.
LFS_DO_ROLLFORWARD is not defined by default.
2000-11-27 03:33:57 +00:00
25491e6a22
Power management (well, suspend/resume) is now implemented. Remove
...
it from the TODO list.
2000-11-27 02:37:14 +00:00
248928c7cf
Add a powerhook to reload AC97 registers after a resume.
...
Sound now works after suspend/resume on my Sony PCG-Z505S
2000-11-27 01:56:53 +00:00
7ec52ba411
Improve a debug message.
2000-11-26 21:05:02 +00:00
88bf6139e5
Regen.
2000-11-26 21:04:43 +00:00
63dfc5b570
Add an Intel camera (rfom OpenBSD).
2000-11-26 21:04:20 +00:00
cee3939088
comment out entries accidentaly committed together with previous
...
change
2000-11-26 20:48:39 +00:00
04a83acaf7
lsu -> ld
2000-11-26 19:24:24 +00:00
eb0dc305da
Insert clock low after ack bit.
2000-11-26 18:53:12 +00:00
f801b80192
Zero-length reads seem to confuse the chip, so don't do that.
2000-11-26 18:12:36 +00:00
57ea462da2
lsu -> ld, by popular request.
2000-11-26 17:44:02 +00:00
ee170a5528
Avoid a possible stall.
2000-11-26 16:16:04 +00:00
63d8906bac
const poisoning.
2000-11-26 15:13:50 +00:00
2906c5057a
Regen.
2000-11-26 15:04:22 +00:00
22b88b3d3e
Add HCCS IDE interface, from Kjetil B. Thomassen <kjetil@thomassen.priv.no>.
2000-11-26 15:03:25 +00:00
c969c9196c
make this usable also standalone
2000-11-26 12:02:16 +00:00
17a9fd0da5
split m68k SunOS and SVR4-specific sigcode.s code to sunos_sigcode.s
...
and svr4_sigcode.s respectively
adjust individual m68k port's locore.s to include new sigcode files if
appropriate
2000-11-26 11:47:23 +00:00
bc435e5551
rename COMPAT_locore.s to COMPAT_sigcode.s - that is more suitable name for it
...
make the files compilable within LKM
2000-11-26 11:18:20 +00:00
3c9d9276dc
Add new powerhook argument values, PWR_SOFTSUSPEND, PWR_SOFTSTANDBY and
...
PWR_SOFTRESUME. Apm calls powerhook with the values in normal interrupt
priority level while others are protected with splhigh().
2000-11-26 11:08:57 +00:00
5692823cae
You can map mq200 registers as well as frame buffer.
...
(This little change has already contains release 1.5 branch by my mistake)
2000-11-26 08:33:43 +00:00
b45e183988
hardware accelarate function parameters turn to dot base.
2000-11-26 06:21:16 +00:00
d76cf8b502
Add multiple include detection - all userland installed headers are now
...
safe.
2000-11-26 06:03:24 +00:00
12269bd46c
Don't try to use ultra-dma on sis chips with revision 0xd0. It loses
...
immediately with a lost interrupt on udma mode 2, downgrades to mode 1
at which point it silently corrupts data on high disk activity. This
happens on two out of 3 machines I own that exhibit high disk activity.
2000-11-26 04:59:18 +00:00
484693d993
`babylon' no longer exists.
2000-11-26 04:59:03 +00:00
dce417005a
Kernel config file for basil.shagadelic.org, my API UP1000 devel machine.
2000-11-26 04:58:07 +00:00
cdfbd303f9
Fix tyop in comment.
2000-11-26 03:31:20 +00:00
c40695f5ad
a complete kernel for wildlab LAMB, http://www.wildlab.com/ .
2000-11-26 03:28:41 +00:00
a643cf07a5
Add the memory controller ASIC driver.
2000-11-25 21:46:42 +00:00
46d0d060fd
Oops, missed a trailing comma ...
2000-11-25 21:06:12 +00:00
eff5b700a8
Enable compatibility for earlier releases.
2000-11-25 20:35:32 +00:00
ee58c485bf
Add CD9660, plus some general cleanup.
2000-11-25 19:33:39 +00:00
2aa72fcec2
Include the cd9660 filesystem and cd(4).
2000-11-25 19:21:50 +00:00
5529847b99
Don't base this on the GENERIC config file; there's too much
...
unnecessary bloat in it for an installation kernel.
2000-11-25 19:18:46 +00:00
636c4f5c12
G/C some long-obsolete functions.
2000-11-25 18:49:59 +00:00
70562420ce
Support multiple files on the command line (they're catted together).
...
Ditch a.out support while we're here (to save updating it).
2000-11-25 18:30:23 +00:00
2fb7179aaf
Add KERNEL_LOCK (et al.) to run MULTIPROCESSOR kernel on a single cpu system.
2000-11-25 15:49:43 +00:00
98253a5467
It seems that all versions of BBC BASIC V can load a text file specified on
...
the command line, so we don't need to tokenize it first.
This makes it less than clear what file type BBBB should have, so let's not
make an issue of it.
2000-11-25 13:32:51 +00:00
2e93099aff
Replace sfb_copycols() which can run better job in some degree.
...
It still fails on certain conditions, thus is left commented out.
copycols() is done by a generic routine which works correctly.
2000-11-25 11:43:42 +00:00
73e60771ab
Fix the code which probes the memory controller ASICs. We can now
...
deal with the 2nd one not being present.
2000-11-25 11:25:07 +00:00
554a1bfcc6
Update and clarify the comment description of how disklabel is managed.
2000-11-25 07:58:07 +00:00
2ed28d2c7a
lots of cleanup:
...
use queue.h macros and KASSERT().
address amap offsets in pages instead of bytes.
make amap_ref() and amap_unref() take an amap, offset and length
instead of a vm_map_entry_t.
improve whitespace and comments.
2000-11-25 06:27:59 +00:00
9f9181afde
Use objcopy instead of dd. This will work after we'll switch to ELF.
...
Using command directly breaks cross compilation. Use macro instead.
2000-11-25 05:27:19 +00:00
add41a3fee
Make sure to return PROM prompt even if loading kernel fails halfway.
2000-11-25 04:42:06 +00:00
f80f1b8624
Preliminary AltiVec support.
2000-11-25 03:03:35 +00:00
4c6aaf87d2
Add placeholder for AltiVec support file.
2000-11-25 03:01:40 +00:00
6d256b4cca
Preliminary AltiVec support
2000-11-25 03:00:48 +00:00
6b0877113f
Some preliminary ALTIVEC support.
2000-11-25 02:59:34 +00:00
77b518b85d
Use u_int32_t instead of u_long to compute LFS checksums, since the
...
checksum is stored in a u_int32_t.
2000-11-25 02:39:34 +00:00
8362134916
put more ISO bits under ifdef ISO.
2000-11-24 23:30:02 +00:00
2a6c823e89
Typo in comment.
2000-11-24 23:30:01 +00:00
b5142d6841
increase PAGER_MAP_SIZE to 16MB and move it to uvm_pager.h
...
since the alpha and mips pmaps use it.
2000-11-24 22:41:38 +00:00
446d4c8a9f
delete not HPCFB_TVOPTIM codes.
2000-11-24 22:05:13 +00:00
bda86c3118
update experimental HPCFB_JUMP codes.
...
(but not completely yet)
2000-11-24 21:58:06 +00:00
4e01e6de8b
When fatal trap occurs, enter DDB with trapframe rather than just "Debugger()".
2000-11-24 21:49:06 +00:00
d9a0883770
define COMPAT_OLDSOCK unconditionally - the code is used virtually for all
...
emulations besides NetBSD, and this way it's LKM-safe
2000-11-24 21:38:28 +00:00
f9fb6f5a55
g/c unused pager ops "asyncget" and "aiodone".
2000-11-24 20:34:01 +00:00
2129dff0f7
The ramdisk now needs 1024 blocks.
2000-11-24 19:40:15 +00:00
b0ec16cc38
remove dead code and other misc cleanup.
2000-11-24 18:58:37 +00:00
ccbcd7c873
use queue.h macros and other misc cleanup.
2000-11-24 18:54:31 +00:00
1e1862bc57
Add another font from 4.4BSD-Lite2/luna68k.
2000-11-24 15:47:15 +00:00
bf5610e667
Some minor optimisations.
2000-11-24 14:49:44 +00:00
6d8f55d932
Use single_inst_b{set,clr}_b() macro defined in m68k/asm_single.h.
2000-11-24 14:08:14 +00:00
5ed7dadbfb
Enable rnd and comment out CD9660. (no SCSI support on news1200 yet)
2000-11-24 13:05:31 +00:00
be69cb38ee
Add/enable COMPAT_SUNOS. It actually works on news68k.
2000-11-24 12:58:17 +00:00
500525029a
PAGE_SIZE on sun3/sun3x is now constant;
...
Use uvmexp.pagesize itself for its initialization.
2000-11-24 11:57:45 +00:00
55ecb0e64a
`emul_sunos' is now declared in the appropriate header file.
2000-11-24 10:29:21 +00:00
7d7a448f88
Make these compile with the latest execsw[] changes. Someone with
...
SunOS binaries needs to test this...
2000-11-24 10:21:30 +00:00
dcd1f30fb8
First cut of a driver for the Memory Controller ASICs found
...
on mvme16x and mvme17x boards.
2000-11-24 09:42:09 +00:00
ca7a0ec817
Make this compile again.
2000-11-24 09:39:37 +00:00
7d191ffe77
Revamp the bus_space(9) implementation:
...
. use a structure for the tag instead of an integer constant,
. add bus_space_{peek,poke}_N() (and G/C `badaddr()'),
. fix a few drivers which have dependencies on the implementation.
2000-11-24 09:36:40 +00:00
a70c48655b
Add a bus_space_tag_t field to the mvmebus_softc structure and
...
initialise/use it in the ASIC-specific back-ends.
2000-11-24 09:27:42 +00:00
06e91c089b
Replace the inline C versions of bus_space_{read,write}_N() with
...
inline assembler. This generates significantly more efficient code,
and trims ~1KB off the size of an mvme68k GENERIC kernel...
2000-11-24 09:05:55 +00:00
7bd36d34a1
Use the MI md_root.c.
2000-11-24 08:54:08 +00:00
55a751c9d5
add ddb commands "show uvmexp" and "show ncache".
...
the former used to be "call uvm_dump", the latter is new.
2000-11-24 07:25:50 +00:00
0a54af033a
cleanup: use queue.h macros and KASSERT().
2000-11-24 07:07:27 +00:00
e6a960146a
Use MI md_root.c.
2000-11-24 06:55:22 +00:00
b974ee7790
Add TC option card descriptions, which are commented out before NetBSD/pmax
...
yields local implementations to them.
2000-11-24 05:02:26 +00:00
ab077e1ed4
change cache_purgevfs() from O(N^2) to O(N).
...
use queue.h macros where possible.
2000-11-24 05:02:23 +00:00
fa19fe52db
adjust the spinlock macros in the non-MULTIPROCESSOR, non-LOCKDEBUG case
...
so that gcc will think that static spinlock are used.
this allows us to remove the ugly conditionalization of
static spinlock declarations.
2000-11-24 03:59:07 +00:00
f9ed4a5d70
IFA_STATS stability (not complete); don't touch ip if it is NULL.
2000-11-24 03:43:20 +00:00
f91f0ea65c
Make this compile again (unterminated `#if' conditional).
2000-11-24 02:21:56 +00:00
22d140fd0b
ifdef DEBUG, increase the max size we'll overwrite in freed memory blocks
...
to detect modifications after frees from 32 bytes to 1 page.
2000-11-24 00:34:32 +00:00
f6b62f776c
avoid division and remainder operations for devices where
...
the sector size is DEV_BSIZE (ie. practically everything).
2000-11-24 00:17:35 +00:00
bac6420b96
fix reversed keywords in previous commit.
2000-11-23 21:58:54 +00:00
c01c2504a2
examine the PDE in addition to the PTE when checking for valid mappings.
2000-11-23 21:44:52 +00:00
c2c8f26967
- Nuke xasc_ioasic.h and xasc_pmaz.h as no code uses the symbols they define.
...
- Hide #include <pmax/dev/device.h> for "pmax oldscsi" inside
#if NRZ > 0 || NTZ > 0.
2000-11-23 09:44:14 +00:00
1420862fba
Add comments and AltiVec reg state.
2000-11-23 02:35:10 +00:00
e4911189f1
Protect lfs_{bmapv,markv} with vfs_{un,}busy. Fix a reference/lock leak
...
in an error case in lfs_markv. Change the vfs_getvfs() error to return
ENOENT, for consistency with failure of vfs_busy().
99% of this patch was from Jesse Off <joff@gci-net.com> (PR #11547 ).
2000-11-22 22:11:34 +00:00
007d059977
- fix \n conversion from \n\r to \r\n
...
- cleanup
2000-11-22 21:14:25 +00:00
d077acc4e9
const struct sysent
2000-11-22 21:12:28 +00:00
b03725b863
Change OF_nextprop to match prototype change to void *
...
(Please don't change prototypes without changing the corresponding
functions!)
2000-11-22 18:18:32 +00:00
818062390e
Intel recommends to print cpu serial number as six dash-separated nibbles
...
(XXXX-XXXX-XXXX-XXXX-XXXX-XXXX), make it so
2000-11-22 16:41:56 +00:00
41b0daf516
- Add some PCMCIA devices.
...
- Commented out USB devices.
2000-11-22 16:15:44 +00:00
ea05f33502
Set intrtype[irq] if interrupt type is IST_NONE.
2000-11-22 16:07:16 +00:00
1931e71852
Constify struct sysent.
2000-11-22 14:00:46 +00:00
f4420dcb03
Revert previous change. I cannot see why this ever worked... Pointed out
...
by Steve Woodford.
2000-11-22 12:39:03 +00:00
4b61041326
e_sysent in struct emul has been const'fied.
2000-11-22 11:47:17 +00:00
03b44427da
Make assym.h be generated again
...
Add pcmcia support to files.prep
Add isa_intr_alloc support.
2000-11-22 08:55:35 +00:00
32831b2eb4
Update for change of name of FPU synch routine.
2000-11-22 08:40:47 +00:00
534e7d4454
Several changes, which get us generally further along with
...
multiprocessor support:
- Implement MP-safe halt.
- Make the FPU saving code more like Bill's on the i386 MP branch.
XXX This code will no doubt be revisited again.
- Pass the cpu_info and trapframe to IPI handlers, saving some work
in the handlers themselves, and also making it possible for the
"pause" handler to reference register state for DDB.
- Add "machine cpu" to DDB, making it possible to reference other
CPUs registers (and thus get e.g. a traceback) from whichever
CPU is actually running the debugger.
- Garbage-collect "machine halt" and "machine reboot" DDB commands.
They don't have a prayer of working properly in multiprocessor
kernels, and didn't really work all that well in uniprocessor kernels.
2000-11-22 08:39:46 +00:00
6cbdf24c45
Add a debugging printf, commented out by default.
2000-11-22 07:44:01 +00:00
0661e6718b
- fix an error in uninitialized variable reference.
...
- add a missing function argument declaration.
- minor comment adjustments.
2000-11-22 06:59:08 +00:00
113dd58233
Add a LOCKDEBUG check for a r/w spinlock spinning out of control.
...
Partially from Bill Sommerfeld.
2000-11-22 06:31:22 +00:00
efadefb53f
In uhci_intr(), only warn about power state confusion if the
...
interrupt was actually for us.
2000-11-22 05:50:59 +00:00
9c0026f5fa
s/char \*/const &/ so that this file compiles again.
2000-11-22 04:28:13 +00:00
fdbcde1abe
more COMPAT_OSF1 fix (exec_conf.c conversion?)
2000-11-22 03:56:52 +00:00
1c06733c6b
constify
2000-11-22 03:54:01 +00:00
6c7e531e99
make COMPAT_OSF1 to compile. not tested (could someone review?).
2000-11-22 03:48:33 +00:00
7231516137
Just access the trapframe directly for DDB registers.
2000-11-22 02:25:52 +00:00
7f6303947a
Restructure the way registers are presented to DDB, to make it
...
easier to support reading registers from other CPUs.
2000-11-22 02:03:48 +00:00
564a044dcb
Using bsd.man.mk looked silly without a man page. Use bsd.prog.mk without
...
PROG instead.
2000-11-22 00:36:22 +00:00
fc955e1104
Move BBBB out of the kernel tree so other architectures can see it.
2000-11-22 00:32:53 +00:00
a622a1b6d2
Remove obsolete comment.
2000-11-22 00:32:24 +00:00
c4eb6c6325
Rudimentary manual page for BBBB.
2000-11-22 00:18:47 +00:00
986c78ced4
New mechanism for building the tokenised version of BBBB under NetBSD. This
...
saves us having to keep a uuencoded version around.
2000-11-21 23:47:37 +00:00
99899665e8
Move of BBBB to a more sensible location.
...
Look in sys/arch/arm26/boot/BBBB,fd1 for old commit messages.
2000-11-21 23:44:24 +00:00
161004f8c3
s/struct const sysent/const struct sysent/
...
(BTW, luna68k was missed in emul/execsw changes?)
2000-11-21 23:19:42 +00:00
f86349723d
Put the call to mvme68k_init() back where it was originally.
2000-11-21 22:08:04 +00:00
09c6390523
make trap_type[] const
2000-11-21 21:27:04 +00:00
3323852a95
put compat-specific locore code to separate *_locore.s files
2000-11-21 21:13:23 +00:00
0ac52aaf1d
remove MD functions for printing vnodes and buffers since there are
...
MI versions now.
2000-11-21 16:34:52 +00:00
20ef6ae40a
Fix netbooting on the 2100/3100. Partially from Thilo Manske
...
<Thilo.Manske@HEH.Uni-Oldenburg.DE> in PR 11212.
2000-11-21 14:21:36 +00:00
bd4ff2a804
PMIN vs. PMAX in boot message. Pointed out by Thilo Manske
...
<Thilo.Manske@HEH.Uni-Oldenburg.DE> in PR 11212.
2000-11-21 14:19:10 +00:00
2c7e91a09e
Define proper macros for FP frame offsets rather than magic numbers.
2000-11-21 13:54:13 +00:00
20494c8f05
Pull in dev/i2o/files.i2o, which is required by files.pci.
2000-11-21 13:34:57 +00:00
ad1c55c73b
implement PTRACE_{GET|SET}FPREGS and framework for PTRACE_{PEEK|POKE}USER
...
this makes it possible to attach to linux process with linux gdb and
see top-most function on traceback; lower functions are not available,
probably due to bad frame setup
it's not possible to setup breakpoints - Linux gdb uses hw breakpoints,
so support for them would need to be written
2000-11-21 12:28:15 +00:00
a53687b13e
(de)allocate linux emuldata on fork/exec/exit as needed
2000-11-21 12:23:29 +00:00
33d7a60ccc
comment out ps_siginfo from struct emuldata for now, add int debugreg[8]
...
update comment a bit
2000-11-21 12:21:43 +00:00
690b28f91e
Add a couple of fonts used on Sony NEWS.
...
Generated from (recently removed) sys/arch/newsmips/dev/fnt{,24}.c.
2000-11-21 11:44:45 +00:00
f33cb83f53
Call zs_set_speed() to calculate the initial timing constants.
2000-11-21 11:41:37 +00:00
c588bbbe76
add a missing newline in a printf().
2000-11-21 08:14:17 +00:00
ce10334de9
Fix errors in color lookup table initialization. Glyph is rendered
...
in visible color now.
2000-11-21 07:42:02 +00:00
7af6378fca
two changes to arm32 fault handling:
...
- when pcb_onfault is set, allow UVM to attempt to resolve permission faults
as well as translation faults (rather than immediately invoking the
onfault handler for permission faults). this is needed for UBC since
it will be normal for uiomove() to fault on read-only mappings which
will be made writable by the pager.
- clear pcb_onfault before calling uvm_fault() and restore it afterward.
if the fault handler generates a pagefault, we'd like to panic rather
than invoking the onfault handler.
2000-11-21 06:30:05 +00:00
197f7aae9c
two changes to pmap_enter():
...
- allow entry of the same mapping that's already there.
this can happen with UBC.
- if PMAP_CANFAIL, return failure rather than sleeping
when we fail to allocate a ptp.
2000-11-21 06:14:40 +00:00
2116915a30
eliminate TRUNC_PAGE() and ROUND_PAGE() in favor of their
...
lowercase counterparts. also, a little misc cleanup.
2000-11-21 05:49:07 +00:00
290a66c213
Reduce probe noise.
2000-11-21 05:23:37 +00:00
29f1bcd8e2
Unlock mutex before jumping off from the critical region instead of
...
testing if locked.
2000-11-21 03:53:27 +00:00
4927de268a
Adjust for p_emul change.
2000-11-21 02:26:07 +00:00
baae0324b9
restructure struct emul and execsw, in preparation to make emulations LKMable:
...
* move all exec-type specific information from struct emul to execsw[] and
provide single struct emul per emulation
* elf:
- kern/exec_elf32.c:probe_funcs[] is gone, execsw[] how has one entry
per emulation and contains pointer to respective probe function
- interp is allocated via MALLOC() rather than on stack
- elf_args structure is allocated via MALLOC() rather than malloc()
* ecoff: the per-emulation hooks moved from alpha and mips specific code
to OSF1 and Ultrix compat code as appropriate, execsw[] has one entry per
emulation supporting ecoff with appropriate probe function
* the makecmds/probe functions don't set emulation, pointer to emulation is
part of appropriate execsw[] entry
* constify couple of structures
2000-11-21 00:37:49 +00:00
1a5d87c9fa
Regen.
2000-11-21 00:25:43 +00:00
219abdb871
Typo.
2000-11-21 00:25:35 +00:00
6faa85c6d3
Note 3Com card support.
2000-11-21 00:25:20 +00:00
6f8985cf15
Regen.
2000-11-21 00:25:04 +00:00
7736bcc821
Add Prolific printer adapter.
2000-11-21 00:24:12 +00:00
e38c89a886
s/iRDA/IrDA/
2000-11-21 00:20:30 +00:00
1bbc3bd9b5
Same as sys/dev/md_root.c.
2000-11-21 00:18:03 +00:00
0bb338521a
Use dev/md_root.c.
2000-11-21 00:17:33 +00:00
d1b07f4fee
Same as sys/dev/md_root.c.
2000-11-21 00:17:08 +00:00
36ae7c2b02
Use dev/md_root.c.
2000-11-21 00:16:33 +00:00
263f913967
Remove obsolete comment.
2000-11-21 00:15:20 +00:00
e5b244c609
disable the LM_EXEC stuff for now, it doesn't work anyway
...
this will be fixed 'soon'
2000-11-21 00:11:38 +00:00
c398987151
More locked_queue_* and lfs_avail accounting fixes from Jesse Off
...
<joff@gci-net.com>. Remove a specious btodb() in lfs_fragextend, and
count blocks shrunk or removed by VOP_TRUNCATE in lfs_avail.
2000-11-21 00:00:31 +00:00
f595d8e741
Ooops, do the last only if MULTIPROCESSOR.
2000-11-20 21:18:07 +00:00
13c94ca56c
We've fixed enough bugs that we can actually acquire the scheduler
...
lock, jump into the idle loop, and run user code! Yippee!
2000-11-20 20:40:17 +00:00
b37faa6ca5
Protect microtime_slock appropriately.
2000-11-20 20:37:52 +00:00
bc146d0eb0
make const the struct emul * pointers passed/used in stackgap_init(),
...
stackgap_alloc()
2000-11-20 20:23:07 +00:00
e12f731db5
On the Alpha, interprocessor interrupts come in at the same priority
...
as normal device interrupts. Because of this, we won't get IPIs while
servicing such interrupts. This can lead to the following deadlock
scenario as reported by Bill Sommerfeld:
- Process runs on cpu1, but has FP state on cpu0.
- Process executes FP-using insn, causing an FP trap, which causes
the kernel lock to be acquired.
- At roughly the same time, cpu0 receives a device interrupt, and attempts
to acquire the kernel lock, which blocks since cpu1 already has it.
- cpu1 sends cpu0 a SYNCH FPU IPI, and waits for cpu0 to release its
FP state.
- Since cpu0 cannot notice the IPI until it has processed the device
interrupt, which it cannot do because it cannot acquire the kernel
lock, we have deadlock.
Solve the problem by adding a spinlock interlock release hook which
checks for pending IPIs and processes them.
Idea from Bill Sommerfeld.
2000-11-20 20:17:13 +00:00
0630488eda
fix typo
2000-11-20 20:07:36 +00:00
3075dec01a
Allow machine dependent code to specify a hook to be run when a
...
spinlock's interlock is released.
Idea from Bill Sommerfeld.
2000-11-20 20:04:49 +00:00
3b15e411a3
add moxa0 at isa entry, marked as experimental
...
This was not added also to other config files primarily because the
driver is not properly tested yet; this entry is primarily meant as an example
for those brave souls who want to try moxa.
2000-11-20 19:53:43 +00:00
b6f0a678dd
Add support for the m68060-based machines: MVME-172 and MVME-177.
...
CPU support taken from a combination of NetBSD/amiga and NetBSD/x68k.
At this time, MVME-172 works but MVME-177 is untested. Since the '177
is otherwise identical to the MVME-167, this should *just work*.
2000-11-20 19:35:28 +00:00
1964a728da
add moxa
2000-11-20 19:27:16 +00:00
fdfb847e3e
Make ci_ipis volatile.
2000-11-20 19:25:43 +00:00
c27af44fc0
Add an attachment for MOXA 168P isa multiport card. This code was
...
written by Christoph Badura.
This was reported to work by user of this code. It's not tested
by me, but it's probably more useful in tree anyway.
2000-11-20 19:24:39 +00:00
7f059c8e69
Move IPI processing into a separate function.
2000-11-20 19:24:36 +00:00
5a22e57dc3
Print the CPU ID while dumping trap info.
2000-11-20 15:33:39 +00:00
11b48d8a4d
Thermal Management Interrupt is available on 750, too.
2000-11-20 15:16:04 +00:00
2cd77d5700
Fix swapped keycode for '[' and ']'.
2000-11-20 14:55:15 +00:00
2819c7b688
Use DMA from mbuf instead of copy in transmit.
...
Still use memcpy in receiving because we must use buffer fill mode
and many packets may share single receive buffer.
XXX: Workaround(?) for CXD3222: it fails to DMA for selfid packet according
to code placement. I'm not sure about the reason (cache? timing? bug?).
Fixed the bug: transmitter sometimes stop and OACTIVE bit of if_fw
never be cleared.
Fixed the bug: freeing free buffer.
Enable ieee1394_drain and ieee1394_watchdog for loss of fragment.
2000-11-20 12:12:18 +00:00
c62d17a551
rationalize the use of b_flags for geteblk() buffers.
...
rather than assigning to the whole field, set or clear individual flags,
which implies that the B_BUSY and B_INVAL flags will remain set.
this allows us to make the assertion in brelse() that B_BUSY is set,
which is the purpose of all this.
2000-11-20 08:24:08 +00:00
a174b8a595
simple_lock_held is only defined when you use LOCKDEBUG.
...
Put it for now in an ifdef LOCKDEBUG.
2000-11-20 06:36:02 +00:00
4e1e677996
regen.
...
CXD32222 -> CXD3222 (Sony OHCI Controller)
2000-11-20 06:23:13 +00:00
e51b1f604e
CXD32222 -> CXD3222 (Sony OHCI Controller)
2000-11-20 06:22:13 +00:00
2f1e131332
Delete a block of code that was intended to get the second
...
CPU to handle interrupts, but prevents a whole slew of things
from working properly on the second CPU. It is no longer
necessary now that several other bugs have been fixed.
2000-11-20 03:15:15 +00:00
fe5b367ce6
In Idle(), only switch to the idle PCB if we're not already running
...
on it, and make sure to deactivate the old process's address space,
as this will not otherwise be done by cpu_switch() later once we're
on the idle PCB.
Also, update some comments related to when s0 (i.e. the old process)
is NULL in the context switching code.
2000-11-20 02:44:45 +00:00
046ce58634
Enable com at cardbus.
2000-11-20 02:00:46 +00:00
f104ee65be
Add a sysctl_rdminstruct() function - same as sysctl_rdstruct() but
...
can return short data if *oldlenp is less than len.
2000-11-20 01:46:56 +00:00
2faa9db8c1
cosmetic change in brand string handling (NULL vs. "")
...
drop Xeon from PIII Cascades entry, it should be handled by the brand id
support (pointed out by Scott Telford in private e-mail).
2000-11-19 23:38:22 +00:00
26fe6166ed
check_pty(): simple_unlock() might have been called even if the lock was
...
not locked previously in some cases; unlock only if the lock is held
2000-11-19 22:34:56 +00:00
95a8447ccf
Add G4 specific exceptions (include AltiVec).
2000-11-19 20:48:20 +00:00
bb71a6b332
Add AltiVec VSCR definitions.
2000-11-19 20:41:04 +00:00
2a0dca4bec
Correct conditionalization of last change.
2000-11-19 20:11:12 +00:00
8074b0b0b2
MULTIPROCESSOR: context switch to cpu's idle pcb before unlocking the
...
scheduler in idle so our stack doesn't get stolen out from underneath us.
2000-11-19 20:08:36 +00:00
c0c9c552c0
Fix obvious typo (don't mark current cpu as not running when doing a
...
broadcast IPI).
2000-11-19 20:05:25 +00:00
b1e1cfdb4a
Add AltiVec VEC bit.
2000-11-19 19:52:37 +00:00
87819535b2
Synch cpu_hatch() with the i386:
...
- print the same style message when the CPU is running.
- Initialize ci->ci_schedstate.spc_runtime on the CPU.
2000-11-19 19:18:19 +00:00
69a3a857be
As a temporary measure, protect microtime() with a simple lock.
...
XXX Needs to be rewritten from scratch.
2000-11-19 19:16:44 +00:00
4a0283d9f0
Allow changing of settings via ioctl only for the superuser.
...
Fixes PR security/11524.
2000-11-19 18:48:44 +00:00
d81861796a
Add support for Intel ICH2
2000-11-19 15:32:24 +00:00
5d04f7b69d
update to reality. sync with GENERIC32.
2000-11-19 15:23:55 +00:00
1368967d8c
fix some comments.
2000-11-19 15:22:51 +00:00
ae33b9bc92
More cosmetics.
...
BTW, why these two "generic" config files exist?
2000-11-19 14:23:34 +00:00
d805c3822e
Remove "rnd is EXPERIMENTAL" comment.
2000-11-19 14:14:31 +00:00
523ec808a6
- Add bba* at ioasic?
...
- Some cosmetics
2000-11-19 14:10:56 +00:00
13c5a51b02
Add some newer stuff from GENERIC and enable rnd.
2000-11-19 14:03:39 +00:00
f6c12f31f0
Sync with GENERIC.
2000-11-19 13:46:29 +00:00
f2df695c3b
Update extern declarations of {hpux,ultrix}_syscallnames for change
...
to e_syscallnames in struct emul. Untested on HP, but should be ok.
2000-11-19 12:47:51 +00:00
ade4906074
verify that a LIST or TAILQ isn't already corrupted before modifying it.
...
enable with "options QUEUEDEBUG".
2000-11-19 06:00:57 +00:00
3a947bfaf7
avoid removing syncer vnodes from the worklist twice.
2000-11-19 05:53:21 +00:00
b9ad1f75b9
Make VM_MAX_KERNEL_ADDRESS end on a page boundary.
2000-11-19 03:16:55 +00:00
561db1fb7e
Implement pmap_growkernel().
2000-11-19 03:16:34 +00:00
0cc75528c8
If MULTIPROCESSOR, count cpus and use that for hw.ncpu
2000-11-19 01:46:26 +00:00
89b4aa9918
Preliminary MULTIPROCESSOR support:
...
- for CP_TIME, sum the times across all processors.
- for kinfo_proc2, fill in cpu_id.
2000-11-19 01:34:58 +00:00
c9313ae2fd
Back out mistaken commits.
2000-11-19 00:56:39 +00:00
d9969892eb
Extend kinfo_proc2 with CPU id
2000-11-19 00:54:50 +00:00
f276315e1c
In pool_setlowat(), only call pool_catchup() if the pool is under the
...
low water mark. (Avoids annoying warning when you setlowat a static
pool).
2000-11-19 00:29:51 +00:00
e97f9e9f7a
use OpenFirmware, not prom version 0, operations. eeprom(8) works now.
2000-11-18 23:45:05 +00:00
a2ea64e265
sync with sparc port. add support for OF_setprop(), OF_nextprop(),
...
OF_interpret() and OF_milliseconds().
2000-11-18 23:43:06 +00:00
a29dff3290
Fix a braino in the last commit.
2000-11-18 22:46:07 +00:00
4b0eb0e2dd
Allow a degree of tolerance when calculating the baudrate timing constant.
2000-11-18 22:34:25 +00:00
ed94d05b50
Clear %fp to terminate backtrace on gdb.
2000-11-18 20:46:28 +00:00
60239485e8
Some CRIME definitions.
2000-11-18 19:33:49 +00:00
4227c8ce3a
Use ETHER_ADDR_LEN.
2000-11-18 19:32:34 +00:00
137c030d5b
Count individual interprocessor interrupts -- it's good to know where
...
they all come from.
2000-11-18 19:25:35 +00:00
34f24f4819
Make sure that the cpu_info points at the correct softc on
...
single-processor kernels running on multi-processor systems.
2000-11-18 17:45:31 +00:00
859adc84de
Loading the cpu_info value into the kgp for the new cpu isn't likely to work
...
very well.
2000-11-18 16:21:37 +00:00
tsutsui