it) looks truncated. At least the return(1) is missing, which I now add as
a first stopgap. Somebody needs to find out if anything else is missing for
these boards.
* Add a MIPS-I (r3000) exception handler to the Pica locore.S.
Change the names of the masks used to extract the exception code
to the new MIPS_xxx names.
* Rename the vector code from MachException() to
mips_r4000_exception, in both locore and in the init_main()
code that copies it from locore to the exception vector locations.
* Change the locore and C code to use the new MIPS_SR_INT_IE
name for the Status register master interrupt-enable bit.
Similar changes to the pmax equivalents are in progress.
arch/pica/pica/trap.c, a generic mips trap handler
arch/pica/pica/pica_trap.c, a handler for Pica interrupts.
so that the common pmax and pica trap handling can eventually be
merged and moved to arch/mips/mips/trap.c
* Add cast to hardclock when it's used directly as an interrupt handler.
* Add a null-interrupt-establish function, to avoid int vs void lint
in pica/dev/dma.c.
* fix include in pica/include/pccons.h to work with "standard"
kernel-compile include path.
* add "MIPS_3k_" for the MIPS-I r[23]000-specific register definitions.
* add "MIPS_4k_" for the MIPS-II/III r4000-specific register definitions.
* add #defines that provide the old values for locore and user
code, so the existing code continues to compile.
Regression-tested against the old headers by grepping for #define's,
editing out the defined symbols, and preprocessing with both the previous
machConst.h headers and this version.
Some unused symbols (CPU and FPU must-be-zero constants) are no longer defined.
Pica interrupt masks are now constant expressions instead of constant
values.
TODO:
* factor out the common #defines into src/sys/arch/mips.
* Get rid of the Sprite coding-style names (MACH_xxx).
* Separate out the r3k/r4k differences from the Pica/pmax differences.
* Figure out how to have a run-time choice of r3k vs. r4k support,
instead of a compile-time choice.
bus memory and I/O space access functions/macros, to be used by
machine-independent code for more sane access to bus resources.
New functions will be added to this set, in the future, as appropriate,
but this is a good starting set. Defines:
bus_{io,mem}_{map,unmap}
bus_{io,mem}_{read,write}_{1,2,4,8}
functions, and several types to go with them.
(soon to be documented on mailing lists; eventually in section 9 manual
pages), most importantly:
(1) support interrupt pin swizzling on non-i386 systems with
PCI-PCI bridges (per PPB spec; done, but meaningless, on i386).
(2) provide pci_{io,mem}_find(), to determine what I/O or memory
space is described by a given PCI configuration space
mapping register.
(3) provide pci_intr_map(), pci_intr_string(), and
pci_intr_{,dis}establish() to manipulate and print info about
PCI interrupts.
(4) deprecate the pci_map_* functions, and provide them only
as compatibility interfaces (in pci_compat.c) which will
eventually go away, implemented as wrappers around
the functions described above.
(5) make pci functions take as an argument a machine-dependent
cookie, to allow more flexibility in implementation.
- getcontext() fills the stack_t portion of the context with an 8k size
stack, 0 flags, and below our current stack pointer. I am not sure where
to set the pointer. Thanks pk [2-2] for noticing that.
Now netscape and java work...
or for which the Pica port is an older revision of the pmax branch.
A merged version with the NetBSD/pmax revision history is in mips/mips/.
cpu_exec.c
elf.c
mem.c
process_machdep.c
* Delete pmax-specific functions and declarations from trap.c
* Delete mips-geeneric functions and declaratinos from pmax_trap.c
* Rename the function pointer used to handle hardware interrupts to
"mips_hardware_intr". Define it in trap.c. Change references elsewhere,
including machdep.c.
Verified to boot on a 5000/200.
* Add spl4() and spl5() functions from the Pica port.
* Add MachFPTrap() as an alternate entry point for MachFPInterrupt.
The r4k reports floating-point execptions as a trap, not an interrupt,
and the Pica port uses the name MachFPTrap().
* Add nops to the Mach_spl?() functions and MachFPInterrupt, as required
for the r4k port.
Commit "floppy" interrupt counter for vmstat -i.
always be eight digits.
Copy the kn02 memory-interrupt reporting function to the kn03 (5k/240)
memory-error handler, since the 3MAXPLUS seems to use the same ECC hardware
as the 3MAX.
to mips/include/asm.h.
Until all references to <machine/machAsmDefs.h> in the pmax and
pica tree are changed to use <mips/asm.h> directly, just do
#include <mips/asm.h>, for compatibility.
Update the include-idempotency preprocessor token to match.
References to machAsmDefs in vendor (sprite, 4.4bsd) headers left unchanged,
for historical accuracy.
provide r3k and r4k versions of each, and move to sys/arch/mips/include.
Note in comments where each mips-based port should provide
definitions in its own cpu.h after including this file.
opcodes from the Pica port. Per Fogelstrom claims the latter are all
supposedly MIPS-II (r6000) instructions, rather than MIPS-III (R4000),
but we haven't checked to be sure. Are LL/SC really in MIPS-II?
CVS:: ----------------------------------------------------------------------
code following the MIPS ELF abi.
* Move the kn01 interrupt handler outside of #ifdef DS5000, to support
3100-only kernels.
* Add #ifdef DS3100 around kn01_enable_intr() to allow configuring
turbochannel-only kernels.
Configuration-time support for specific models of DECstation still needs
more thought/work.
the "Fast Assembler Version of the copy loop)
- Yet another sanity check included: initialize unused receive buffers to
zero sender id; and test for sender hardware id of zero in the receiver.
Gives us better error messages in case flaky hardware causes spurious
receive interupts.
Replace header files from src/sys/arch/pmax/include/ with versions that
include equivalent files from <mips/include>.
(cvs magic copied the previous revisions, with history, to
src/sys/arch/mips/include).
with versions that include equivalent files from <mips/include>,
after merging changes from the pmax and pica ports into the
src/sys/arch/mips/include tree.
ptrace.h cdefs.h pmap.h signal.h kdbparam.h
with versions that include equivalent files from <mips/include>.
(cvs magic copied the previous revisions, with history, to
src/sys/arch/mips/include).
bsd-aout.h elf.h endian.h exec.h float.h ieeefp.h limit.h pcb.h proc.h
profile.h reg.h regdef.h setjmp.h stdarg.h vmparam.h
with versions that include equivalent files from <mips/include>.
(cvs magic copied the previous revisions, with history, to
src/sys/arch/mips/include).
[bsd-aout.h elf.h endian.h exec.h float.h ieeefp.h limit.h pcb.h proc.h]
[profile.h reg.h regdef.h setjmp.h stdarg.h vmparam.h]
plus (missed one:)
ecoff.h
with versions that include equivalent files from <mips/include>.
(cvs magic copied the previous revisions, with history, to
src/sys/arch/mips/include).
bsd-aout.h elf.h endian.h exec.h float.h ieeefp.h limit.h pcb.h proc.h
profile.h reg.h regdef.h setjmp.h stdarg.h vmparam.h
the NetBSD-1.1 convention. Change the mainbus `struct confargs'
and the "generic" interrupt-establish method, used by devices that
appear on both a kn01 and TC decstations, to match.
Change the macros in autconf.h accordingly.
Add new device-attach struct cfattach le_tc_ca and struct cfdriver le_cd.
Change IOASIC cfdriver references from "ioasiccd" to "ioasic_cd".
Change "mainbuscd" to "mainbus_cd"
update the old-config to new-config glue used with the 4.4bsd/pmax
SCSI drivers to use new device attach declarations and names for
the "oldscsibus", "tz" and "rz" drivers.
- split softc size and match/attach out from cfdriver into
a new struct cfattach.
- new "attach" directive for files.*. May specify the name of
the cfattach structure, so that devices may be easily attached
to parents with different autoconfiguration semantics.
- split softc size and match/attach out from cfdriver into
a new struct cfattach.
- new "attach" directive for files.*. May specify the name of
the cfattach structure, so that devices may be easily attached
to parents with different autoconfiguration semantics.
- split softc size and match/attach out from cfdriver into
a new struct cfattach.
- new "attach" directive for files.*. May specify the name of
the cfattach structure, so that devices may be easily attached
to parents with different autoconfiguration semantics.
- split softc size and match/attach out from cfdriver into
a new struct cfattach.
- new "attach" directive for files.*. May specify the name of
the cfattach structure, so that devices may be easily attached
to parents with different autoconfiguration semantics.
- split softc size and match/attach out from cfdriver into
a new struct cfattach.
- new "attach" directive for files.*. May specify the name of
the cfattach structure, so that devices may be easily attached
to parents with different autoconfiguration semantics.
which represents the "keyboard controller". Give "pc" and "vt" drivers
the "pckbd" attribute. In pcattach() (pccons and pcvt), attach children
of the keyboard controller.
instructions which have to be emulated by the operating system on that
chip. This code will still run on M68020, M68030 and M68040, but
might be a bit slower on those chips.
prototype in sys/systm.h (which was just put in in by christos)
with revision 1.43 of sys/systm.h
revision 1.43
date: 1996/03/14 18:59:12; author: christos; state: Exp; lines: +1 -3
systm.h: Bring Debugger() prototype into scope.
- softclock was called with extra argument.
- missing %x formats in printf's
- kgdb_copy called with only two arguments.
Fix conf.c so that it used the _conf.h files from other places instead of
rolling its own.
hook (pci_md_attach_hook()) to do any machine-dependent attachment
gunk, e.g. on the i386 printing out the configuration mode (if bus 0)
(2) don't pass max device number for a given bus in, use
PCI_MAX_DEVICE_NUMBER, which can be defined on a per-machine basis.
(defaults to 32. on i386, it's 32 if pci conf mode == 1, 16 if 2.)
cpuswitch() simplified, now pushes and pulls a switchframe structure
on entry and exit. Added extra comments to indicate the states of
various registers throughout cpuswitch().
Added proc_trampoline function.
mark