scw
80a6d1c537
reboot(8) is now supported, by hitting the hard reset (RST) bit in the GCSR.
...
Figure out the amount of onboard RAM by looking at the MEMC040/MEMECC
configuration register. (Bank #0 only, for now).
1999-02-15 21:05:26 +00:00
is
83852d7633
regenerate
1999-02-15 19:34:13 +00:00
pk
6139fd16f3
Install the `machine' link again; it went missing a while ago.
...
Add `-I.' to CPPFLAGS to use it.
1999-02-15 19:31:34 +00:00
is
41bc990eca
Create a RCS id in the generated configuration file
1999-02-15 19:16:41 +00:00
pk
2a1ecde639
Transfer copyright to TNF.
1999-02-15 19:01:38 +00:00
pk
d292580f3f
Use PROMLIB to streamline this code. This also provides the bulk of
...
Open Firmware boot code.
1999-02-15 18:59:36 +00:00
pk
8460b71d8d
* Add promlib.c to common sources.
...
* Compile with prototype warnings turned on.
1999-02-15 18:52:12 +00:00
bouyer
d683e62685
Be less strict on ATAPI signature, at last one CD puts 0x00 in sc instead
...
of 0x01.
1999-02-15 18:47:59 +00:00
bouyer
13e811e874
Revert to 1.23, this was not supposed to be checked in yet.
1999-02-15 18:43:08 +00:00
bouyer
18496766b2
For CDIOCCLOSE, ignore media changes, as some drive seems to return this
...
info here.
1999-02-15 18:41:04 +00:00
bouyer
379429d4df
If the REQUEST_SENSE command fails, issue a reset instead of XS_DRIVER_STUFFUP.
...
If REQUEST_SENSE succeeds but doens't return any data, return XS_SHORTSENSE
as the sense field will just contain a copy or the error register.
1999-02-15 18:40:01 +00:00
christos
3029ee19e3
Hmm, I forgot to add that..
1999-02-15 08:48:20 +00:00
ragge
f379e1e9c0
Fix RCSid, pointed out by Hubert Feyrer.
1999-02-15 07:07:43 +00:00
hubertf
56f2d188fc
RCS ID police
1999-02-15 04:54:34 +00:00
sakamoto
a6a228ce7f
RCS ID police
1999-02-15 04:38:06 +00:00
hubertf
aa4a217d1c
RCS ID police
1999-02-15 04:36:33 +00:00
hubertf
100778d54a
RCS ID police
1999-02-15 04:25:28 +00:00
hubertf
dcd5f59c0a
RCS ID police
1999-02-15 04:14:54 +00:00
augustss
fd9002550c
Make the reset even longer do cater for really bad devices.
1999-02-15 00:32:16 +00:00
tron
210b267f84
Regen from pcidevs.
1999-02-14 22:44:36 +00:00
tron
acb24b6080
Add 3Dfx's Voodoo II. Fixes PR kern/7000 by Brett Lymn.
1999-02-14 22:38:18 +00:00
christos
c95ea656d6
Elf bits.
1999-02-14 20:04:26 +00:00
scw
a72d37c4fa
Merge support for mvme167 into main tree.
1999-02-14 17:54:27 +00:00
pk
059697a999
Use PROMLIB's prom_setcontext().
1999-02-14 14:37:45 +00:00
pk
3ee0ba2805
romcall() => prom_halt()
1999-02-14 14:37:15 +00:00
christos
5e44086190
Provide a way for compat programs to specify files in the normal tree.
...
We do this using a trick similar to mach's /../; if a path is given as
/..<absolute-path-name>, then we return <absolute-path-name>
1999-02-14 14:32:02 +00:00
pk
67df93822d
Add size arg to getpropstringA
1999-02-14 14:03:16 +00:00
pk
8edcd03969
Use the PROMLIB interface.
1999-02-14 12:44:31 +00:00
pk
9896803ae6
Fake a label only if it appears to be blank, and if so use RAW_PART
...
instead of 0.
1999-02-14 12:42:33 +00:00
pk
4b9ee1f8ce
This file is superseded by promlib.c
1999-02-14 12:38:03 +00:00
pk
4dc82c28b4
Exit: obp.c; Enter: promlib.c & openfirm.c
1999-02-14 12:36:50 +00:00
pk
a8456f4e8a
Check OBP magic: if no match then assume an Openfirmware PROM.
1999-02-14 12:33:55 +00:00
pk
1e5bf77774
Adjust to functionality and changes introduced with <machine/promlib.h>
1999-02-14 12:26:16 +00:00
pk
a99ba2939c
Provide a uniform interface to most of the PROM functions.
...
Include an Openfirmware back-end (mostly copied from sparc64).
1999-02-14 12:23:03 +00:00
dbj
f651d280fa
Continue hacking on esp driver. Seems relatively stable in read only mode.
...
write operations appear to lose scsi interrupts and causes timeouts.
changes in this checkin include:
a nextdma bugfix causing a diagnostic check to erroneously trigger
Changed tail strategy to only use tail buffer for the minimal end slop
changed expected write dma overrun to 32 bytes.
turned on nextdma diagnostic check for dma end address since it
no longer gets triggerred by ethernet dma and helps debug scsi dma.
Added esp debugging printout and support.
1999-02-14 10:19:51 +00:00
dean
6dc3d1eae8
Put back bsd.own.mk and added comment explaining why it must be included.
1999-02-14 02:56:19 +00:00
thorpej
e523f4968b
Make sure full-duplex is reflected in TXCON, and don't reset the interface
...
when the media changes.
1999-02-13 21:08:08 +00:00
pk
bae33b3ad6
Split the printf variants into separate files.
1999-02-13 20:56:57 +00:00
christos
6e13c7d4b5
Avoid defining __extension__ if we don't need to. Breaks lint.
1999-02-13 20:35:02 +00:00
minoura
4d5a04afc4
MI version of the Fujitsu MB89352 SCSI Protocol Controler (SPC) driver.
...
Based on experimental NetBSD/pc98 ISA/PISA version, which was derived
from the MD /sys/arch/x68k/dev/spc.c.
1999-02-13 17:33:14 +00:00
scw
c13995b38f
Add entry for CD240[01] driver.
1999-02-13 17:07:36 +00:00
scw
94719c7b9a
New MI front-end for the Cirrus Logic CD240[01] Multi-protocol
...
Communications Controller.
This is still a work in progress, but it is functional enough to
be usable.
1999-02-13 17:05:19 +00:00
christos
21485fd1d6
noise reduction.
1999-02-13 16:45:28 +00:00
christos
f2da4dfc95
Support __syscall for COMPAT_AOUT properly.
1999-02-13 16:10:44 +00:00
christos
ac66b8f92d
Don't forget to lower the spl in the error case of sigprocmask
1999-02-13 15:25:51 +00:00
dbj
997f74e47c
Continued work on esp scsi driver. Now can at least do enough i/o to create and mount
...
a filesystem, but is not stable enough yet for general use.
increased priority of ethernet interrupts, mostly useful to aid debugging
of scsi interrupts while using an nfs disk.
added additional debugging output in the next dma driver.
perform extranneous cache flushes/purges before dma reads/ after dma writes
to aid debugging of scsi dma.
1999-02-13 09:44:50 +00:00
lukem
dcab0210a0
convert from NOxxx= to MKxxx=no.
...
include <bsd.own.mk> if testing a MKxxx variable.
1999-02-13 02:54:17 +00:00
thorpej
22a5cb007f
Fix printf format warnings on Alpha.
1999-02-13 02:41:40 +00:00
thorpej
70b91539e9
Restructure the interrupt handler and 1-second timer a bit, and tidy up
...
the lazy-transmit-interrupt logic, fixing a few minor logic problems.
Now unable to reproduce the lockup problem described in PR #6767 . Changing
PR's state to "feedback".
1999-02-13 02:12:59 +00:00
dean
c372a9b915
Remove bsd.own.mk include
1999-02-12 23:48:46 +00:00