221f247a25
Add some missing functionality.
...
- wait READY signal in enable function
- use tsleep for large delays
- implement disable function
2001-03-27 18:06:39 +00:00
20ba07f2fe
- add dev_noimpl(xxx,yyy) macro to replace "(dev_type_xxx((*))) yyy",
...
and use appropriately
- create more helper macros:
. cdev__xyz_init(c,n), such as cdev__ocri_init() for
/* open, close, read, ioctl */, etc.
. cdev__xRy_init(c,n), where nullop is used instead of enodev to dummy out
method `R' and the comments now read /* xxx (read) yyy */ instead
. cdev__xyz_t_init(c,n,t) - as per cdev__xyz_init, but sets d_type = t
as well
- use seltrue instead of dev_noimpl(poll,*), as (IIRC) cdevsw.d_poll should
always DTRT WRT returning a valid result. (a few devices previously
incorrectly returned ENODEV)
- use dev_noimpl(stop,enodev) instead of dev_noimpl(stop,nullop) if tty
== 0, because it doesn't matter if dev_type_stop isn't implemented in that
case, and it allows the use of the cdev__xyz_init macros. certain ports
(sparc,sparc64,x68k) used the nullop method for dev_type_stop in a few
drivers, whereas everything else uses enodev
- ensure that the comments are accurate WRT the behaviour of a given entry
2001-03-26 12:33:22 +00:00
d2f3ad2de2
Support machdep.booted_kernel sysctl.
2001-03-23 11:10:10 +00:00
7ed6dadd10
Handle bootargs passed by hpcboot.
...
Change stack pointer initialization.
2001-03-23 08:58:14 +00:00
2d6322c3be
Handle ELF symbol table.
2001-03-22 03:45:39 +00:00
9f60674a47
now that duplicated stuff has been moved to sys/conf.h, remove unnecessary
...
defs for: lpt, joy, pc
2001-03-21 23:42:14 +00:00
7e9512010c
Oops. I forgot this line.
2001-03-21 17:43:39 +00:00
4b32677535
Map DMA controller and disable its DMA channels.
2001-03-21 17:42:37 +00:00
f8dab8e69a
Make card insertion/removal work.
...
XXX powerdown and {io,mem}_unmap are still missing.
2001-03-21 16:16:35 +00:00
7c429e90c2
Handle interrupt polarity.
2001-03-21 16:08:34 +00:00
f1b9737b90
Fix nit.
2001-03-21 14:48:30 +00:00
d16849a006
Make this compile again.
2001-03-21 14:40:00 +00:00
1f21d8b280
hpcarm kernel is ELF.
2001-03-20 18:01:49 +00:00
ac3bc537bd
eliminate the KERN_* error codes in favor of the traditional E* codes.
...
the mapping is:
KERN_SUCCESS 0
KERN_INVALID_ADDRESS EFAULT
KERN_PROTECTION_FAILURE EACCES
KERN_NO_SPACE ENOMEM
KERN_INVALID_ARGUMENT EINVAL
KERN_FAILURE various, mostly turn into KASSERTs
KERN_RESOURCE_SHORTAGE ENOMEM
KERN_NOT_RECEIVER <unused>
KERN_NO_ACCESS <unused>
KERN_PAGES_LOCKED <unused>
2001-03-15 06:10:32 +00:00
c08eec9f47
Use hpc/hpc/disksubr.c.
2001-03-14 14:47:40 +00:00
aebf9049d4
Update to use install_coproc_handler_static(), since install_coproc_handler()
...
isn't safe this early.
XXX hpcarm should use db_machine_init() to do this.
2001-03-13 20:52:48 +00:00
1bb261e173
Fix interrupt handling somewhat so that break signal gets DDB.
2001-03-12 03:27:18 +00:00
ffe630e7c3
Sync with sa11x0_reg.h rev 1.4.
2001-03-11 14:37:03 +00:00
ea4611b0cd
add ExtendedGPIO desc of iPAQ H3600
2001-03-11 07:27:36 +00:00
2cb44b8020
add h3600 and jornada720 gpio port and irq
2001-03-11 06:00:42 +00:00
a9e9b871de
Add sacc, sacpcic, and sagpcic.
2001-03-10 19:05:40 +00:00
f14e35f58e
Driver code for SA11x1 based PCMCIA devices.
2001-03-10 19:01:27 +00:00
79d31f6571
Common driver code for SA11x0 PCMCIA function.
2001-03-10 19:00:39 +00:00
57abc92eeb
This file is no longer used. PCMCIA driver code is divided into
...
sa11xx_pcic*, sa11x0_pcic* and sa11x1_pcic*.
2001-03-10 18:59:22 +00:00
2d36b2225d
Support SA1111 companion chip.
2001-03-10 18:50:37 +00:00
356943c6c4
Fix nit. Read functions were actually writing. :-(
2001-03-10 17:32:14 +00:00
3a52278a23
Map GPIO registers in saip.
2001-03-10 15:34:38 +00:00
4c08e34e90
hpcarm/hpcarm/ast.c is no longer.
2001-03-10 14:10:51 +00:00
b2cb6de80e
Use sa11x0_bs_tag instead of mainbus_bs_tag.
2001-03-10 13:34:34 +00:00
a62d9f6fa0
Handle the offset argument in bus_space_{read,write}* correctly.
2001-03-10 13:29:38 +00:00
4333644371
Copy bus_space_map() function from arm/mainbus/mainbus_io.c.
2001-03-10 13:27:53 +00:00
9224009c5d
Fix bugs in delay().
...
- it could wait infinitely.
- large roundoff error.
2001-03-09 18:55:29 +00:00
aa76b5208c
Make it compile again after arm, arm32 changes.
2001-03-09 12:13:15 +00:00
b7cd0eeaac
Move arm32/arm32/ast.c to arm/arm32/ast.c
2001-03-06 07:52:35 +00:00
83b8de43dd
Move undefined.c from sys/arch/{arm32/arm32,hpcarm/hpcarm} to sys/arch/arm/arm
...
in preparation for making it usable on arm26 as well.
2001-03-05 23:06:14 +00:00
850f81157a
Fix an error printf format.
2001-03-05 07:11:18 +00:00
25ec015449
Merge setregs() from sys/arch/arm32/arm32/machdep.c,
...
sys/arch/hpcarm/hpcarm/machdep.c and sys/arch/arm26/arm26/vm_machdep.c
into sys/arch/arm/arm/arm_machdep.c.
2001-03-04 23:25:00 +00:00
aa34be4532
Make "options ARMFPE" work again.
...
Mostly due to Richard Earnshaw.
2001-03-04 14:32:12 +00:00
0bf382d920
Remove redundant cdev_decl(cpu).
2001-03-04 14:14:23 +00:00
b575ca9f67
Remove local copies of these since they are now shared and are
...
in arm/arm32
2001-03-04 08:29:22 +00:00
93c0e77b0f
Only define MACHINE & MACHINE_ARCH in port-dependent param.h.
...
Everything else (since it's common) is from <arm/arm32/param.h>
2001-03-04 08:28:51 +00:00
58438fb425
Move compat_13_machdep.c, strstr.c, copystr.S, bcopyinout.S, and
...
bcopy_page.S to arm/arm32 and remove port-local copies.
2001-03-04 08:25:38 +00:00
c32dba2092
Remove support for /dev/cpu*. This code has never done anything useful anyway.
2001-03-03 18:04:34 +00:00
c25aec3d9f
PCB convergence, part the first:
...
Move the pointer to the current user trapframe from struct mdproc to struct
pcb (as on arm26). Only tested by compiling kernels on arm32 and
hpcarm (dnard seems to be incomplete anyway). Someone should try running one.
2001-02-28 18:15:42 +00:00
4b483d7606
Move "options ARMFPE" to files.arm, so generic ARM files can use it.
2001-02-27 17:56:31 +00:00
6584a7e79d
This file doesn't need <machine/cpus.h>.
2001-02-26 16:33:10 +00:00
7127877cf8
Putting param.h back into hpcarm's include
2001-02-26 00:07:54 +00:00
3fb058011a
Move arm32 ports over to using <arm/armreg.h>, so <cpu.h> mostly contains
...
NetBSD-specific definitions.
This also entails some changes to the way CPU identification is done. I hope
I've got it right.
2001-02-25 21:31:13 +00:00
846fe69958
Remove CPU_* options (they're in files.arm now -- for some reason I missed
...
this lot in the last commit).
2001-02-25 18:28:27 +00:00
64d5dfd570
Use MI md_root.c.
2001-02-25 15:45:23 +00:00
toshii