thorpej
820809faec
Regen; added AMD Am79c874 NetPHY-1LP.
2001-08-25 05:45:25 +00:00
thorpej
05e4fb8e6c
Add AMD Am79c874 NetPHY-1LP.
2001-08-25 05:44:59 +00:00
thorpej
85a7cdc261
Driver for the 10BASE-T portion of the AMD 79c901 PHY.
2001-08-25 04:06:26 +00:00
thorpej
158cb83996
Add a driver for generic HomePNA PHYs. Currently supports the HomePNA
...
portion of the AMD Am79c901.
2001-08-25 03:21:38 +00:00
thorpej
9fe2378664
For HomePNA PHYs, don't register it w/ ifmedia as 10BASE-T, but
...
rather as HomePNA1.
2001-08-25 01:57:56 +00:00
thorpej
f7f8866fea
Add a flag that indicates that a device is a HomePNA device.
2001-08-25 01:41:17 +00:00
thorpej
684a4b71e3
Regen; improve AMD PHY names.
2001-08-25 01:39:59 +00:00
thorpej
9d04a424fe
Improve the AMD PHY names.
2001-08-25 01:39:22 +00:00
thorpej
b6aa674493
Driver for the Altima AC101 10/100 Ethernet PHY.
2001-08-24 17:54:32 +00:00
haya
45e61b5399
Buf fix: use PWAIT priority and do not set PCATCH.
2001-08-24 10:55:53 +00:00
wiz
251b3464be
heirarchy -> hierarchy
2001-08-24 10:24:45 +00:00
thorpej
6621bd5a97
More useful definitions for CSR80.
2001-08-24 05:04:40 +00:00
thorpej
0f89153491
Oops, TMD/RMD byte count masks were one bit shy (and it makes a big
...
difference when the value in the field is actually the two's complement
of the buffer length).
2001-08-24 00:16:25 +00:00
tsutsui
b6e4b26d3b
Check 80 pins cable in acard_setup_channel() for Acard ATP860.
2001-08-23 10:02:25 +00:00
thorpej
ce0d046061
Regen; recognize the 79c972's 10BASE-T interface mapped onto MII.
2001-08-23 04:47:36 +00:00
thorpej
b52818d607
The Am79c972 PCnet-FAST+ has its built-in 10BASE-T interface mapped
...
onto the MII bus. Recognize it.
2001-08-23 04:47:05 +00:00
thorpej
29bfa727c1
Regen; take part numbers out of PCnet-PCI product descriptions.
2001-08-23 03:42:26 +00:00
thorpej
16efbbf387
Take part numbers out of the PCnet-PCI product descriptions.
2001-08-23 03:41:36 +00:00
thorpej
2c469bbf82
Regen; Add Promise ATA/100 TX2.
2001-08-23 03:32:24 +00:00
thorpej
915a8ef871
Add Promise ATA/100 TX2 device ID.
2001-08-23 03:31:55 +00:00
simonb
dc0e4c0679
Cosmetic cleanups:
...
- cominit() is local to com.c, remove prototype from comvar.h.
- Don't prototype comstop(), cdev_decl(com) does this.
- Don't use a block device switch table declaration(!).
- No need to include "com.h".
2001-08-22 12:44:10 +00:00
ad
a0fdfb54e0
Implement/fix FDDI, receive checksums, media selection and a ton of other
...
stuff.
2001-08-22 09:43:15 +00:00
ad
1d6329bb04
Parameter group changes:
...
- Do FIELD_SET correctly for scalar types.
- Add some basic table ops.
- Push error reporting back into iop.c.
- Add some field index and (yet more) LAN defs to i2o.h.
2001-08-22 09:42:05 +00:00
nisimura
bd799bf74f
Use ri->ri_hw field for TC module base address.
2001-08-22 05:15:58 +00:00
nisimura
1df3ced126
Move small storage for ev_name string into tcds_softc.
2001-08-22 05:00:27 +00:00
nisimura
b7f1b6d54b
Nuke fb_devconfig data structure which was found unnecessary to have.
2001-08-22 02:24:29 +00:00
thorpej
10591340be
Add a PCI_NETBSD_ENABLE_IDE option, that goes along with
...
PCI_NETBSD_CONFIGURE, which tells machine dependent code
to enable the specified (by a bitmask) PCI IDE channels in
the southbridge, in the event that system firmware does not
do so.
2001-08-22 00:36:57 +00:00
thorpej
d987b42429
More PCnet-PCI/ILACC bits.
2001-08-21 16:39:06 +00:00
thorpej
8b72cec4d8
Add some more PCnet-PCI registers.
2001-08-21 16:37:38 +00:00
pooka
429d846242
regen: psion gold card
2001-08-21 16:13:14 +00:00
pooka
e62b69f246
add vendor Psion and product Psion Gold Card
2001-08-21 16:13:03 +00:00
bjh21
a180b9a8f4
Add fiq.
2001-08-20 23:15:40 +00:00
thorpej
04a394787e
Oops, the "auto" capability was getting masked off by mistake.
...
Fixes a panic reported by Chuck Silvers.
2001-08-20 20:22:53 +00:00
fvdl
b9f24a3dd1
Regen.
2001-08-20 19:29:59 +00:00
fvdl
69906a3032
Add some entries for the AMD 76x chipset for completeness.
2001-08-20 19:29:08 +00:00
ad
dacf7e8e3d
Don't special case the retry for Media Changed... More later.
2001-08-20 15:45:10 +00:00
wiz
c52d355d71
"wierd" is weird.
2001-08-20 12:20:01 +00:00
wiz
1e378c4c12
precede, not preceed.
2001-08-20 12:00:46 +00:00
wiz
f33f8d5e61
Succeed has two 'c's.
2001-08-20 11:57:34 +00:00
wiz
0f95e3da3c
precede, not preceed, and a whitespace fix.
2001-08-20 11:57:02 +00:00
ad
13499203a2
Two changes submitted by Sergey Svishchev <svs@ropnet.ru>:
...
- Don't send START UNIT upon open if the drive is playing audio (PR 11768).
- If we receive sense indicating that the media changed, retry (PR 8326).
2001-08-20 11:31:10 +00:00
ad
ab54b70cae
Cosmetic change.
2001-08-20 11:20:51 +00:00
nisimura
a6f7e30eec
Nuke fb_devconfig data structure which was found unnecessary to have.
...
224 byte saving in text+bss, and runtime.
2001-08-20 08:34:39 +00:00
ad
52449ef3bf
Medium Not Present has number of defined ASCQs. Pointed out by Sergey
...
Svishchev <svs@ropnet.ru> in PR 8326.
2001-08-20 07:47:01 +00:00
ad
d861b4992a
Add descriptions for Medium Not Present ASCQs.
2001-08-20 07:41:14 +00:00
gehenna
0999a72932
The latest EHCI spec is 0.96
2001-08-20 07:16:35 +00:00
gehenna
fb5869c240
Regen
2001-08-20 03:48:29 +00:00
gehenna
f0dd0ada57
Add NEC USB2.0 Host Controller
2001-08-20 03:45:55 +00:00
itojun
ffc3e18ad0
typo
2001-08-20 02:07:27 +00:00
yamt
75ed9ccf7f
fix scsipi_target_detach with wildcard target.
2001-08-19 14:05:13 +00:00
thorpej
173f6058ab
Add Chip ID register values for various AMD PCnet parts.
2001-08-18 21:16:34 +00:00
kanaoka
13f671edcf
Improve intr_ack code to support for 3c556,3c556B.
...
Some cards don't have an interrupt acknowledge
register in PCI config space, so we map and write
it, such as CardBus driver does.
2001-08-18 05:49:28 +00:00
thorpej
2d4c311492
Regen; added Avance Logic ALS4000.
2001-08-18 05:00:51 +00:00
thorpej
563f369b78
Add Avance Logic ALS4000 Audio.
2001-08-18 05:00:21 +00:00
chs
92140aa25f
make this compile.
2001-08-18 00:41:38 +00:00
matt
864924f7f3
regen.
2001-08-17 23:14:40 +00:00
matt
211070f3bd
Add Apple Uni-N (as used in QuickSilver) product IDs.
2001-08-17 23:14:00 +00:00
fredette
1094f3c8dc
When asked to set the transfer mode, just call back
...
immediately, because we don't support that.
2001-08-17 00:24:09 +00:00
augustss
a8415c10db
Clear busy flag on write error. From PR 13731, IWAMOTO Toshihiro.
2001-08-16 22:31:24 +00:00
ragge
adc0050e52
Trying to get these files out of Attic.
2001-08-16 14:56:30 +00:00
ragge
988a8d9aa1
Trying to get files out of Attic.
2001-08-16 14:55:32 +00:00
wiz
5b9ecbe2eb
Fix indentation in switch statement, per kern/13725 by seebs.
2001-08-16 13:37:32 +00:00
eeh
0cbe02398a
Add support for smaller sector sizes so we can mount ffs filesystems.
2001-08-15 22:21:01 +00:00
uch
edcb9ebf0f
fix hf_order_flags.
2001-08-15 15:16:53 +00:00
augustss
64e123faaf
If there was a vendor+product locator match return a higher match value.
...
Rationale, if you have a device (e.g., a mouse) with a more specific
driver but want to recognize it with the more generic driver you can
do that by supplying vendor and product locators for the generic one.
2001-08-15 00:06:49 +00:00
augustss
dfe96bae01
Add a little infrastructure so that individual drivers can easily check
...
if thee was a vendor+product locator match.
2001-08-15 00:04:59 +00:00
mrg
4f3eac8332
mtod() with uintptr_t, not bus_addr_t.
2001-08-14 11:57:26 +00:00
mrg
c9fa7a702a
add (u_long) casts for sparc64.
2001-08-14 11:55:38 +00:00
cjs
0079971ec4
Back out previous change; I've lost my card and can't test it.
2001-08-14 01:09:33 +00:00
wiz
a8a789da28
Space nit. kern/13712 by seebs.
2001-08-13 22:52:26 +00:00
cjs
6c1314f4b8
Add Transmeta and products, and an ALI integrated sound/modem device.
2001-08-13 08:51:38 +00:00
cjs
a95288891b
Change the '@(#)' strings in front of the copyright/version messages to '@( )'
...
so as not to clutter the output of the what(1) command when run on a kernel.
2001-08-13 03:07:23 +00:00
bjh21
976681bfed
Adjust #ifdefs so RASOPS_SMALL doesn't give "defined but not used" warnings.
2001-08-10 19:12:35 +00:00
thorpej
04ad3b5316
There is no need to use M_EOR here.
2001-08-09 11:54:32 +00:00
bouyer
efdadcb7dc
Properly set/clear IFF_OACTIVE.
2001-08-07 16:53:06 +00:00
christos
92bef1e82b
regen
2001-08-07 13:57:41 +00:00
christos
6c97413c48
Add zonet zen (Henrik Berglund)
2001-08-07 13:57:24 +00:00
kanaoka
59942d00fd
Fix typo in a message.
2001-08-07 02:59:53 +00:00
soren
3c508a8790
Add support for the PCI-400 card and correct the clock rate for all the
...
VScom/Titan cards.
2001-08-06 22:25:36 +00:00
bouyer
5243b06e38
Improvement: allocate one page of dmamem for Rx, Tx and nullbuff instead of
...
3 different ones.
Also pass the rigth seg/nseg to bus_dmamem_free().
Correct types in debug printf's
2001-08-06 19:20:26 +00:00
augustss
be12c4395c
Don't write back status bits that are cleared when written.
2001-08-06 15:15:08 +00:00
ad
c1856b0940
Add more LAN defs.
2001-08-06 13:33:49 +00:00
ad
5b470dcd5f
Add iopl.
2001-08-06 13:25:10 +00:00
ad
8cd802fef0
Thinko.
2001-08-06 12:17:09 +00:00
ad
c7b78dd4ee
Add iopl.
2001-08-06 12:13:49 +00:00
ad
6e8802596a
Rough I2O LAN interface driver. Needs a bit of work.
2001-08-06 12:12:36 +00:00
enami
4977f2fb2d
Advertize pause capability (802.3x flow control) to peer.
2001-08-06 09:51:40 +00:00
thorpej
de108bd82d
Add enable/disable hooks on devices that have ACPI power management
...
capability, using D3 and D0 power states. This saves me quite a bit
of battery when not using the built-in Ethernet on my IBM T-20 during
long IETF meetings.
2001-08-05 23:39:59 +00:00
jdolecek
74954dadf9
use unsigned variable types as appropriate
2001-08-05 18:07:51 +00:00
jdolecek
57a49a2de0
introduce hard limit on maximum font size (WSDISPLAY_MAXFONTSZ - 512KB)
...
and keymap size (WSKBDIO_MAXMAPLEN - 64KB)
2001-08-05 11:26:52 +00:00
jdolecek
539f3bcc23
change ccio_ndisks and sc_nccdisks of struct ccd_ioctl from int to u_int
...
introduce hard limit on number of disks which can be contcatenated togetger,
CCD_MAXNDISKS
2001-08-05 11:20:13 +00:00
jdolecek
7810c0591b
Allow max. MAXPHYS sized mu_datasize for user command.
...
Reviewed by Andrew Doran <ad@NetBSD.org>.
2001-08-05 11:11:33 +00:00
jdolecek
ceb38aa743
remove unnecessary casts, make variable types consistent with the
...
respective wsdisplay_cmap member
no functional change, stylistic only
2001-08-05 11:09:51 +00:00
jdolecek
fcc522e5ce
It seems the fixed rate versions are actually fixed at 48 kHz, not 44.1 kHz.
2001-08-04 22:15:56 +00:00
ad
87f451b1a0
This isn't relevant any more.
2001-08-04 16:55:07 +00:00
ad
03e46dc80b
Some changes from OpenBSD, and some of my own:
...
- More SCSI port defs.
- Nuke vtophys().
- Release resources in iop_init() upon failure.
- Don't use a message wrapper when initalising the outbound FIFO.
- A couple of field size/endian fixes.
- Just use iop_post() when we don't need special handling.
- IM_DISCARD is now pointless, since we don't queue at the driver level.
- Map data transfers from/to userspace directly.
- A few comment and stylistic changes.
2001-08-04 16:54:18 +00:00
enami
97ceb61316
MII access routines for ASIX AX88190.
2001-08-04 11:38:57 +00:00
bouyer
10a5470050
Ops, forgot to commit this one:
...
- kill carrier detection code, it's not that usefull and give false indications
on loaded ethernet segments
2001-08-04 02:21:24 +00:00
bouyer
7c292e3d22
- kill the carrier detect code. It's not usefull any more and can give
...
false informations on a loaded ethernet segement.
- convert to bus_dma(9) (better late than never :)
- add proper le32toh/htole32 so that it works on big-endian system (tested
on macppc).
Close PR kern/10327.
2001-08-03 16:53:08 +00:00
ad
e7021f649d
Remove unnecessary test.
2001-08-03 14:10:16 +00:00
augustss
cf037802c2
Add an I/O Data adapter.
2001-08-03 11:17:17 +00:00
augustss
c7aac1f4ef
Regen.
2001-08-03 11:16:50 +00:00
augustss
5c01e15b22
Ad an I/O Data Ethernet adapter.
2001-08-03 11:16:24 +00:00
tsutsui
38016b0ba8
Fix some typos in newer ALi M5229 support. Approved by bouyer.
2001-08-03 01:31:08 +00:00
toshii
f2c68887e0
Check if sc->sc_dc is NULL, so that non-console hpcfb can attach without
...
a panic.
2001-08-02 14:40:04 +00:00
sato
5215d66720
add MC-R700 battery parameters.
2001-08-02 11:21:27 +00:00
sato
2746e887bc
turn pwctl_debug to 0
2001-08-02 09:47:18 +00:00
ad
aaf3c7c88b
Hook in the mly control interface on i386.
2001-08-01 20:54:16 +00:00
tsutsui
2c44aa6dfd
Remove unused pciide_print() declaration. From OpenBSD.
2001-08-01 16:29:21 +00:00
dante
26c61e2dd0
change\n\tswitch (scsiq->host_status)\nto\n\tswitch (scsiq->scsi_status)\nin adw_isr_callback()
2001-07-31 23:12:01 +00:00
matt
f8e21592da
regen
2001-07-31 22:30:07 +00:00
matt
b2c29c20ae
Add pci ids for the Intel 80312 I/O companion chip for the
...
Intel 80200 XScale processor.
2001-07-31 22:27:25 +00:00
christos
e01e4819af
regen.
2001-07-31 17:01:34 +00:00
christos
4d31855a1c
recognize dlink-660+, from jandberg@netbsd.org (Jukka Andberg)
2001-07-31 17:01:15 +00:00
jdolecek
5664c34574
all outstanding MCA bugs fixed, woo-hoo :)
2001-07-31 13:16:25 +00:00
jdolecek
2b7d2123cd
Make console polling (cnpollc/cngetc) work on IBM PS/2 keyboard controller
...
using level triggered interrupts, which livelocks calling intr routine
if the data register is not read in the interrupt routine, as it's case
when polling after interrupts are enabled during boot.
Block all interrupts when polling for keypress, and modify intr routine
to read and store value from data register. The latter one is to avoid
losing a keypress when one would manage to press a key when kernel is
not in spl-guarded code section.
Tested with classic pccons, 'pcconskbd at pckbc' and 'pckbd at pckbc'
configurations, on i386.
2001-07-31 13:15:28 +00:00
ichiro
6a036b85d9
correct interrupt pipe of USB-RSAQ1.
...
sc_intr_iface was defined newly,
and interface of interrupt was kept in sc_intr_iface.
2001-07-31 12:33:11 +00:00
sato
52d89f6cf1
Abort redrawing when screen switch was requested.
...
Set virtual text vram when other one is drawing framebuffer.
2001-07-31 10:50:06 +00:00
sato
387ddeb6f1
change DPRINTF() to VPRINTF() in pwctl_hardpower().
2001-07-31 10:37:49 +00:00
ad
aae284be36
Oops, put back the initalization of "done" in mly_thread().
2001-07-31 02:07:14 +00:00
ad
5226d11119
Assume that me->lun contains the device number if this event is for a
...
logical device.
2001-07-30 23:49:51 +00:00
ad
2fa020ae0b
- Forget to report events from logical devices.
...
- Cosmetic changes.
2001-07-30 23:46:28 +00:00
ad
12c4049d31
Don't match boards with a PCI class code of `I2O'.
2001-07-30 23:29:08 +00:00
thorpej
8fc6974449
Oops, make Rx interrupt deferral actually work.
2001-07-30 20:12:10 +00:00
ad
87da05b00f
Note mly(4).
2001-07-30 20:02:58 +00:00
ad
3b1828355b
Add a driver for Mylex AcceleRAID and eXtremeRAID controllers with v6
...
firmware. Based off the FreeBSD driver, and re-worked by tls, erh and I.
2001-07-30 19:59:04 +00:00
tsutsui
99297e58cb
We no longer have MI ncr(4) driver.
2001-07-28 12:42:34 +00:00
tsutsui
690c5b1ae3
Enable the Acard UIDE controllers by default.
...
My WDC MDMA-only (non-UDMA) drives did not work on the Acard controllers,
but it turns out that the problem was not Acard specific.
These WDC drives do not work on the ESS ISAPnP wdc port nor on
macppc obio wdc port neither, and another Quantum MDMA-only drive
works fine on the Acard.
These WDC drives work fine on my i386 pciide (which is initialized
by the BIOS), so maybe we have to do something in MI wdc to initialize
such drives properly...
2001-07-28 12:07:11 +00:00
pooka
4ec277f9ee
regen
2001-07-28 00:33:43 +00:00
pooka
70cd305a5d
3c556 V.90 MiniPCI modem
2001-07-28 00:33:01 +00:00
thorpej
fab087b3a2
Tell the MII layer to advertise PAUSE capability, and configure
...
the chip's PAUSE threshold.
2001-07-27 22:46:20 +00:00
thorpej
7459c35d44
Clean up 1000BASE-SX autonegotiation, and add a way to advertise
...
PAUSE capability.
2001-07-27 22:44:59 +00:00
thorpej
4333749c7a
Use the bit-swapped OUI for the 5221. (Have I mentioned that I really
...
don't like how the current MII_OUI() works?)
2001-07-27 17:58:20 +00:00
thorpej
773c261d65
Add a 3Com 3c905B internal PHY.
2001-07-27 17:55:34 +00:00
thorpej
3d3c5fa78c
Regen; added a 3Com 3c905B internal PHY made by Broadcom.
2001-07-27 17:55:07 +00:00
thorpej
4063cb411b
Fixup some Broadcom entries, add an entry for Broadcom PHY that
...
is built-in to some 3Com 3c905B cards.
2001-07-27 17:54:40 +00:00
tsutsui
1f1c7b96d8
Fix some comments and remove an unused define. Partially from OpenBSD.
2001-07-27 16:16:34 +00:00
tsutsui
aa9c31f0c3
Pull up some changes from OpenBSD's iha.c rev 1.6:
...
- rename tul_* functions/variables iha_* for consistency
- disable updating EEPROM routine, which does not work anyway
- make iha_rate_tbl[] const
2001-07-27 15:51:14 +00:00
tsutsui
5a7161cf2a
Pull up some changes from OpenBSD's iha.c rev 1.5:
...
- minor code cleanups
- rename some functions for better consistensy/clarity
- consolidate extended message generation into new function
- a couple of minor code clarifications to eliminate extra return
statements and make absolutely sure actscb is NULL during a reselect
2001-07-27 15:10:56 +00:00
oster
99020323e6
Nuke the 5 NULL parameters from rf_DoAccess(). Observe that 4 of
...
the variables are passed directly to rf_AllocRaidAccDesc(), and the 5th
isn't even used. Hunt them down and nuke them too.
2001-07-27 03:30:07 +00:00
thorpej
fe97433fcd
All CORKSCREWs have MII.
2001-07-27 02:33:34 +00:00
thorpej
f532a911f0
Chipset is CORKSCREW for the 3c515.
2001-07-27 02:13:26 +00:00
thorpej
f9616582f4
Regen -- added 3c515 for the ep driver.
2001-07-27 02:12:57 +00:00
thorpej
d3ee9bd16e
Add the 3c515 for the "ep" driver.
2001-07-27 02:12:19 +00:00
wiz
e11d04474c
issueing -> issuing
2001-07-26 22:55:12 +00:00
wiz
7b3241693f
aquired -> acquired, issueing -> issuing
2001-07-26 22:54:34 +00:00
bouyer
8e2205572d
Better support for newer ALI M5229 chipsets: support Ultra/66 for rev >= 0xC2,
...
Ultra/100 for revs >= 0xC4.
The the generic PCIIDE interupt routine for chipsets rev >= 0xC2 in native
mode, it seems that newer chipsets don't have the ACER_CHIDS register :(
From Linux and FreeBSD.
2001-07-26 20:02:21 +00:00
jdolecek
528ab39cef
make local variable 'len' in wi_set_nwkey() size_t (hence unsigned)
...
this one is merely cosmetic, no functional change
2001-07-26 19:46:01 +00:00
jdolecek
b834e97632
make local variable 'len' in awi_wep_setnkey() size_t (hence unsigned)
...
this one is merely cosmetic, no functional change
2001-07-26 19:40:59 +00:00
tsutsui
5309850228
Fix timeout overflow caused by "scsictl format" on machines HZ==100.
2001-07-26 15:51:04 +00:00
ad
4950b7867f
Map both memory and IO space, but prefer using memory space.
2001-07-26 15:35:20 +00:00
ad
3b6c996d19
- Stop the system drive status check when re-configuring in order to
...
avoid a issuing a possibly spurious warning.
- Squash some nits.
2001-07-26 12:38:03 +00:00
ad
7a92f3b65a
Don't map I/O space if we have already have a good memory mapping.
2001-07-26 12:36:16 +00:00
thorpej
4a416b823f
Fix 1000BASE-X duplex negotiation. That'll teach me to read the
...
manual more carefully next time.
2001-07-25 22:00:43 +00:00
thorpej
799abef5f4
Jumbo frames do not currently work (chip goes catatonic -- silicon bug?),
...
so don't set the capability.
2001-07-25 15:44:48 +00:00
kanaoka
be5153a923
- Increase Early TX threshold if underrun occurred.
2001-07-25 09:57:31 +00:00
thorpej
1dfe605642
Match the Antares Gigabit Ethernet.
2001-07-25 01:48:14 +00:00
thorpej
560fc018c4
Regen; Added Antares Gigabit Ethernet.
2001-07-25 01:45:55 +00:00
thorpej
4ac142a1d3
Add the Antares Microsystems, Inc. vendor ID, and the product ID
...
for their Gigabit Ethernet board (a TC9021 board targeted at the
Sun market).
2001-07-25 01:44:59 +00:00
thorpej
6b0e779ce6
Remove a debugging #define.
2001-07-25 00:12:33 +00:00
thorpej
3939c2a6c7
Driver for the Sundance Tech./Tamarack TC9021 Gigabit Ethernet
...
controller.
2001-07-25 00:11:51 +00:00
ad
b25d5c0666
Pasto; found by tls.
2001-07-24 21:55:35 +00:00
sato
2ddad1a12e
add missing terminator of hpcbattery_parameters.
2001-07-24 09:23:30 +00:00
jdolecek
000f85917b
Since ~all pckbc_poll_data1() callers had the appropriate pckbc
...
tag handy and we are going to need more of it in pckbc_poll_data1() soon,
change pckbc_poll_data1() to accept it as first arg. iot, ioh_d, ioh_c are
no longer passed separately. Use fabricated pckbc tag for calls from
arch/arc/jazz/pckbc_jazzio.c and dev/isa/pckbc_isa.c.
2001-07-23 21:03:19 +00:00
bouyer
aa053c0bd1
Regen for TITAN PCI100H.
2001-07-23 20:14:36 +00:00
bouyer
d2039a5f9b
Add TITAN PCI100H.
2001-07-23 20:13:26 +00:00
thorpej
bd35a1b7ed
Make sure to initialize the all Rx descriptors properly in *_init()
...
even if mbufs for them are already allocated.
2001-07-23 17:26:50 +00:00
thorpej
536f4fded2
Adjust some reset delays.
2001-07-23 17:23:09 +00:00
thorpej
13dab3bfa7
Make sure to initialize the all Rx descriptors properly in *_init()
...
even if mbufs for them are already allocated.
2001-07-23 17:20:03 +00:00
thorpej
a7dc1c1b01
Some whitespace cleanup.
2001-07-23 17:08:18 +00:00
tsutsui
2f456b8f00
Make sure to initialize the all Rx descriptors properly in sonic_init()
...
even if mbuf for them are already allocated.
This fixes "receive descriptor exhausted" errors.
2001-07-23 16:33:48 +00:00
nathanw
9f36932334
Add the constant for the IEEE 1284-mode protocol for the printer
...
class, as given in revision 1.1 of the USB printer class spec.
2001-07-23 15:17:50 +00:00
bouyer
ecbce129cb
Handle HPT-370A controllers, from skanto@sjk-software.fi (kern/13540) but
...
with some differences to the original patch: don't assume all controllers with
rev >= HPT370_REV are HPT370, and explicitely print if we have a chip with a
rev the driver does't know.
2001-07-23 14:55:26 +00:00
wiz
a9356936b4
seperate -> separate
2001-07-22 13:33:58 +00:00
takemura
64b6b76a21
You must set 'HPCFB_SWAP_*' if bytes are stored in reverse order, i.e.
...
little endian like order, however, usage of 'HPCFB_SWAP_*' was widely
misunderstood because it reminded you of 'RI_BSWAP' in raster operation.
Please note that 'RI_BSWAP' indicate that frame buffer byte order is different
from natural order of system while 'HPCFB_REVORDER_*' is independent of
system byte order.
2001-07-22 09:56:39 +00:00
jdolecek
f2b42af4c6
dev/isa/if_ate.c depends upon 'ate_isa', not just 'ate'
2001-07-21 16:08:17 +00:00
takemura
0f960df346
- delete sc->sc_screens[]
...
- BUGFIX: hpcfb_alloc_screen clears real frame buffer
- Doesn't allocate any screen in attach routine
2001-07-21 14:49:58 +00:00
ichiro
3cd8eb40b0
support to change of CRTSCTS
...
change uplcom_reset parameter
2001-07-20 21:03:41 +00:00
thorpej
bb93036fa9
Regen.
2001-07-20 07:07:28 +00:00
thorpej
959f6ee3f3
Adjust for the corrected Marvell entry.
2001-07-20 07:07:05 +00:00
thorpej
38f94a6fbe
Bleh, I don't like the way our miidevs works now. Repair the
...
Marvell Semiconductor entry.
2001-07-20 07:06:42 +00:00
thorpej
7859dd206a
The EEPROM registers/bits are different on the Corkscrew (3c515). Adjust
...
for this.
2001-07-20 05:44:48 +00:00
thorpej
9bf4afa0b6
Add the ISA Bridge ASIC registers found on the Corkscrew (3c515).
2001-07-20 05:43:11 +00:00
itojun
93a890b609
it seems that pp_{up,down} code does not really help, since (1) sppp_ioctl
...
calls lcp.{Up,Down} by itself, and (2) as lmc driver uses interrupt to
get the card initialization callback lcp calls from sppp_ioctl
does not really work. for chdlc pp_{up,down} are not really necessary so
don't bother (#if 0'ed).
2001-07-19 19:15:13 +00:00
kleink
d775ce82eb
Hint BUS_DMA_READ and BUS_DMA_WRITE.
2001-07-19 17:47:18 +00:00
kleink
1bd93b6232
Hint BUS_DMA_READ and BUS_DMA_WRITE.
2001-07-19 17:19:40 +00:00
itojun
b66f433b03
sync with latest Linux driver, avoid framing error on LMC1200 (T1/E1).
...
from hal@vailsys.com
2001-07-19 17:02:05 +00:00
thorpej
44e529fecc
Use BUS_DMA_READ and BUS_DMA_WRITE in some obvious places.
2001-07-19 16:36:14 +00:00
itojun
e13c617dee
do not call pp_{up,down} on cisco HDLC mode, it seems that
...
sys/net/if_spppsubr.c does not like it.
XXX api clarification needed...
2001-07-19 16:30:52 +00:00
thorpej
623f83a793
Use BUS_DMA_READ and BUS_DMA_WRITE in some obvious places.
2001-07-19 16:25:23 +00:00
itojun
639dfc8d8f
readability changes (s/0/LMC_LINK_DOWN/, whitespace)
2001-07-19 16:14:50 +00:00
wiz
1bc6d2cee9
Fix typo (`information' has an 'r').
2001-07-19 16:13:00 +00:00
wiz
4124ef0b6c
Fix comment (device has a 'c').
2001-07-19 16:12:21 +00:00
itojun
abd116eff5
- on IFF_UP change, inform sys/net/if_spppsubr.c of the change so that
...
we can run LCP and subsequent PPP negotiation.
- suppress too noisy printf() for about AIS event (if you remove the cable,
it will bark forever).
- sppp_dequeue() can return NULL even when sppp_isempty() is false, so check
it and do not deref NULL pointer.
- sppp_flush() on LMC interface shutdown.
- prepare to change BPF type on the fly (bpf_change_type).
2001-07-19 15:38:17 +00:00
sato
98f091d6b9
add hpcmips battery parameter tables.
2001-07-19 11:40:19 +00:00
sato
8e381812a7
battery parameter structures for hpc systems.
2001-07-19 11:39:24 +00:00
augustss
fa4d95379a
Prototype for aue_reset_pegasus_II().
2001-07-19 09:40:40 +00:00
thorpej
600cfcb30a
bcopy -> memcpy
2001-07-18 20:52:47 +00:00
thorpej
42a4d5b520
bcmp -> memcmp
2001-07-18 20:42:54 +00:00
thorpej
ce623a36cc
bzero -> memset
2001-07-18 20:39:53 +00:00