91d6272def
flags and type are seperate now
1999-02-28 17:42:37 +00:00
6b24c4b0fd
Cleanup (in preparation for using gzip to estimate entropy)
...
(1) remove unused and probably bad (from an API POV) ioctls,
(2) split tyfl into type and flags,
(3) collect an array of samples, and add them all at once. Soon, this
will be using gzip to estimate the entropy, but for now the original
estimation methods are still used.
(4) kill rnd_add_data() -- it compliated the API for little benefit
1999-02-28 17:18:42 +00:00
3ebb419571
Update to slightly altered rnd_attach_source() api
1999-02-28 17:08:05 +00:00
87ae97e3f0
Fix what is probably a past-o.
1999-02-28 17:01:49 +00:00
5a1959a811
Push 'curproc' on the stack, not 'cachectl'. (I own Ignatios one brick :)
1999-02-28 16:49:04 +00:00
0d46b0d0fd
Make "1" an acceptable result in port tests.
...
This is a workaround for crappy hardware, normal keyboard controllers
return a "0".
Should fix PR port-i386/6636 by Krister Walfridsson and problems
reported by chopps and fvdl.
1999-02-28 14:26:38 +00:00
c0fb2ab4f2
Use a SETRECURSE lock before calling VFS_MOUNT in the mount() system call,
...
since the lock may be taken again. This was the intention of the CANRECURSE
lock already there, but didn't work.
Only fill in the vnode<->mountpoint links (mountedhere and vnodecovered)
after VFS_MOUNT returned succesfully. It might happen that something called
from VFS_MOUNT mistook the vnode for an already successfully mounted on
one because of this.
1999-02-28 14:12:54 +00:00
09469c565c
Define LK_SETRECURSE.
1999-02-28 14:09:45 +00:00
080ad305ff
Recursive locks were previously only available with LK_CANRECURSE. This
...
could be done in one of 2 ways:
* call lk_init with LK_CANRECURSE, resulting in a lock that
always can be used recursively.
* call lockmgr with LK_CANRECURSE, meaning that it's ok if this
lock is already held by us.
Sometimes we need a locking type that says: take this lock now, exclusively,
but while I am holding it, I may go through a code path which could attempt
to get the lock again, and which is unaware that the lock might already
be taken. Implement LK_SETRECURSE for this purpose. Assume that locks and
unlocks come in matching pairs (they should), and check for this 'level'
using SETRECURSE locks.
1999-02-28 14:09:15 +00:00
cff4c9630b
Don't mix in data just to stir the rnd pool. Extracting data will do that,
...
any network packets received might, too, so this is already taken care of.
1999-02-28 13:41:24 +00:00
f41d893cec
Because the old bound check is used at several places we need to make
...
sure that the array is really NULL terminated. Fixes PR bin/7062.
1999-02-28 11:46:26 +00:00
d57c7b76ca
replace ENTRY() label in data segment which broke the code completely
1999-02-28 11:45:44 +00:00
4bcb8b3a48
Correct precedence in calculation of storage for pollfds.
1999-02-28 11:30:18 +00:00
925f506372
- Don't use static array hack if neither "-p" nor "-P" are used.
...
- Because the logsocket array is not NULL terminated use the entry number
for bound checks.
1999-02-28 11:16:18 +00:00
c87ec3954b
Use correct expression "sizeof(char *)" instead of "sizeof(char **)"
...
to calculate memory size.
1999-02-28 11:03:35 +00:00
9929e72099
Fix some buglets pointed out by "Brett D. Slager" <bds@snarf.thnet.com>
1999-02-28 10:05:00 +00:00
3aca0028f1
Fix else ambiguity.
1999-02-28 10:01:08 +00:00
8b41c31868
Fix compiler warning.
1999-02-28 09:59:33 +00:00
04e9e604aa
Regenerate.
1999-02-28 07:45:13 +00:00
c3f462a037
Alas, Melody boards don't configure in a DraCo.
1999-02-28 07:42:47 +00:00
e640c5d7cc
Move all IPL setup to intr.c, and do some sanity checking.
1999-02-28 04:52:07 +00:00
b8ca758af8
Implement pmap_procwr() the arm32 part of fix for pr 6152.
1999-02-28 01:49:25 +00:00
cc6ca72465
Made this compile:
...
- fifth arg to recvtftp should be size_t (not ssize_t)
- the path is passed tftp_makereq as a part of the handle structure
1999-02-28 00:57:07 +00:00
89c4b1c360
Let's try to make prom_cnget() work.
1999-02-28 00:29:24 +00:00
b6bf56be36
Use block load/store in pmap_zero_page()/pmap_copy_page().
1999-02-28 00:26:46 +00:00
1f9186e111
Teach it some VIS instructions.
1999-02-28 00:23:58 +00:00
4ffa956fbb
Fix up alignment issues dumping physical memory.
1999-02-28 00:22:32 +00:00
548ab086f2
Urk, .Nx doesn't DTRT either.
1999-02-28 00:00:03 +00:00
a502b55bc2
Don't .Xr sha1(1) until we get such a thing, but do .Xr md5(1).
...
Also, don't .Ox (?) 2.0, but do .Nx 1.4.
1999-02-27 23:11:56 +00:00
5c062abb64
Fix the bus print function.
1999-02-27 22:21:13 +00:00
2b90737599
Replace local xva_arg() inline function with macros similar to those in
...
the stdio vfprintf() function. Fixes compilation errors on powerpc due
to differences in how va_list is implemented.
1999-02-27 21:52:23 +00:00
b69760be08
Fix typo introduced in rev 1.11
1999-02-27 21:38:04 +00:00
7b36f54b99
Revert part of previous and use C/// instead of S/// for mipse[bl]->mips.
1999-02-27 21:21:26 +00:00
907d550100
This needs to use C///, not S///.
1999-02-27 21:13:50 +00:00
27fc050f1d
Oops.
...
Forgot to commit this LONG ago.
1999-02-27 20:46:56 +00:00
c805ae93c2
Crash dumps should *not* be world readable.
1999-02-27 20:40:30 +00:00
0fe440926c
Correct type of 3rd argument.
1999-02-27 19:31:58 +00:00
bebd05917b
Add iwm.4 (oops)
1999-02-27 19:02:10 +00:00
78665b6502
Increase default data size to compile libbfd without `virtual memory
...
exhausted'. Suggested by Scott Reynolds.
1999-02-27 18:32:31 +00:00
fb74cf8d8e
Finish fix for PR7059: rename fields in mbstat we no longer maintain
...
to _m_spareN; add a comment explaining where to get comparable info.
1999-02-27 18:20:37 +00:00
a6a7b5c100
Add ./etc/fstab.sd example.
1999-02-27 17:59:35 +00:00
f4db3c5d7a
Add target for raid devices.
1999-02-27 17:57:31 +00:00
b36297112e
fix PR7057: division by zero if no mbufs allocated
...
fix PR7059 (partial): mbuf cluster counts were based on counters which
are no longer maintained.
(full fix will involve renaming the now-unused fields in mclstat in mbuf.h)
1999-02-27 17:37:24 +00:00
e81b9ed433
* Make changing the PLT slot entry (lazy function binding) thread-safe.
...
* Insert `iflush' instructions for the patched words in PLT entries.
1999-02-27 17:12:13 +00:00
f008a1bbd0
Missing `break'.
1999-02-27 16:13:59 +00:00
8593bb58c2
Fix typo reported by Wolfgang Helbig <helbig@Informatik.BA-Stuttgart.DE>
...
in PR 7056.
1999-02-27 13:31:26 +00:00
331694119a
Our device name differs from the PROMs node name.
1999-02-27 13:17:08 +00:00
49035b27c8
Do not call printf() from a CPU that is spinning up; defer the probe
...
messages to cpu_attach() where the boot processor takes care of them.
This also necessitates a slight change in the way the FPU name is stored.
1999-02-27 13:11:21 +00:00
4e7849055a
Add comment on the necessity of having to look at implicit memory addends
...
even though the sparc architecture uses `Elf_Rela' structures exclusively.
1999-02-27 11:36:02 +00:00
d6f8b575ea
Add PCI-PCI bridge device.
...
Up maxusers to 32.
1999-02-27 11:19:25 +00:00
explorer