definitions.
* Include <mips/cpuregs.h> in <cpu.h> so kern_clock.c has user/kernel
status bits in scope. Still needs work; r2k/r4k previous-mode bits
are different.
* Include <mips/mips_param.h> in pica/include/param.h, for locore declarations,
and definitions of vm and other constants that should be shared across
NetBSD/mips systems to esnsure user-level binary compatibility.
which was taken from OpenBSD/pica.
The previous revision of elf.c replaced Ted Lemon's elf exec machinery
with something closer to Christos' MI elf machinery. It turns out
that old NetBSD/pmax elf binaries have three segments, and the newer
elf exec machinery cannot exec them.
The old elf exec machinery is folded back into cpu_exec.c, which falls
back onto using the old machinery if the new machinery fails. The
old-style binaries will be deprecated at the 1.2 release.
* Update arch/mips/mips/cpu_exec.c to include MI exec_elf.h header,
and to use the MI interface exec_elf_makecmds().
* Replace arch/mips/mips/elf.c (Ted Lemon's elf code) with
a version of Christos's MI elf exec code, munged to support demand paging
and mips shared libraries.
it into three pieces:
* locore.S, which contains generic mips locore code,
applicable for both r2000/r3000 and r4000s (in 32-bit mode).
* locore_r2000.S, which contains r2000/r3000 (MIPS-I) versions
of the locore functions that need mips-generation-specific
instructions or handling.
* locore_r4000.S, which contains r4000/r4400/r4600 (MIPS-III?) versions
of the locore functions that need mips-generation-specific
instructions or handling.
Much of the code in locore_r4000.S is derived from Per Fogelstrom's Pica port.
locore.S still contains some pmax-specific DMA-buffer copy functions.
to the mips tree.
* Add declarations of functions used by vm_machdep.c.
* Add declarations of functions printed by name in stack tracebacks.
* Add declarations of functions used by the model-independnet mips machdep.c
code.
symbolic lookup of the CPU-level specific locore entry points to use the
r2k, not the r4k, labels.
Include header files to get prototyped declarations of ipintr() and arpintr().
Remove unused variables and parenthesize assignments in if () expressions.
Gcc warns of a possible && vs || operator-precedence bug in the network
softint dispatch code, which needs more thought.
locore calls to go via a locore-entry jumptable.
Cast the (int) arguments to MachTLBUpdateEntry() to avoid
warnings. Variables TLB entries are still type-punned as either structs
or ints, without any regard, when the pmax-specific VM code passes
them as arguments to functions.
locore calls to go via a locore-entry jumptable.
Use mips_btop(), mips_round_page, mips_trunc_seg() instead
of pmax_btop(), pmax_round_page, pmax_trunc_seg().
Add Per's software-readonly-bit mechanism, since the r2000 and r4000
hardware TLB entries are very different, and the r4k has no space for
software bits in TLB entries. That is, this pmap code still won't work
on r4000 machines. Some other solution, like another jump table for
clients of the pmap code, is necessary.
locore calls to go via a locore-entry jumptable.
Declare r2000- and r4000-specific exception-handler functions, to which
trap() and interrupt() dispatch exceptions. Initialize r2000- and r4000-
specific exception-handler vectors, when CPU_R4000 and CPU_R2000 are
defined.
Update the stack-traceback code (partially) to understand and print
the new low-level exception-handler code, via which machine exception-vectors
send exceptions to call trap() or interrupt(). This needs more work.
an vector (struct) of function pointers. Add prototype declarations for
each vector entry.
Add declarations for the r2000 (MIPS-I) and r4000 (MIPS-III) locore
versions of the relevant functions.
to all mips ports.
So far, this consists of code to initialize a vector, or jump-table, of
pointers to locore functions that require different definitions on different
Mips CPUs (eg., r2000/3000 and r4000); a generic wrapper for setting up
CPU-specific exception vectors; and CPU and FPU identification code.
locore functions. The new names are used by C code to construct a jump-table,.
making it less infeasible to have a single kernel image work on both
r3000 and r4000 systems.
Add prototypes to (most of) src/sys/arch/pmax/pmax. (The un-protytyped
parts still have pending merges with the Pica port.)
Fix splx() glitches in pmax/clock.c.
Delete old cpu/fpu identification from pmax/autoconf.c, use r4400/r4600/idt
aware code from Pica port, now in mips/mips/mips_machdep.c.
Delete unused multi-CPU autoconfiguration code; NetBSD/pmax does not
support decsystem 5800s anyway.
Replace impliclty-sized types (u_long, u_short) used in
declarations of byteorder functions witho explicitly sized types
(u_int32_t, u_int16_t).
Avoids problems with using ntohl(foo) as (eg) an argument to printf().
Do not define __BDEVSW_DUMP_OLD_TYPE, as it breaks prototyping
of device dump functions, and should be port-dependent in any case.
The pmax 4.4bsd/pmax-derived drivers are being fixed, and the pica port
uses the MI scsi drivers already.
Move to mips/pmax/genassym.c, as (most of) the assembler locore code is
being merged into a generic-MIPS locore.
Remove the redundant pmax/pmax/genassym.c.
* cut-and-paste all the code for both r2000 (MIPS-I) and r4000 (MIPS-III)
into both the pica and pmax locore.S.
* Change the names of the small segments of vector code that are
bcopied to the machine vector locations, to avoid clashing.
Get rid of the Sprite MachXXX names for the vector code, and
use use mips_r2000_xxx and mips_r4000_xxx instead.
Update the names used in the vector-copying code and trap handlers
to match.
* Most of the rest of the pica locore.S was copied from the pmax
locore.S, and then edited to work on an r4000. The names of
functions and of manifest constants stayed the same, although
both assmbler code and constant values changed.
cut-and-paste such code into contiguous blocks protected by
#if / #endif. Much of the cache and trap-handling code
needs r3000-only register fields, on the r3000, and r4000-only
insns and registers on the r4000.
* change the pmax r2000 exception-handling code to extract a trap
code with the user/kernel bit at 0x20 rather than 0x10.
(r2000s have 4-bit execption codes, r4000s have 5-bit.)
Use the a 16 from-user-space + 16-from-kernel space jump table,
just like on the r4000 pica port.
* add NOPs to the common code where required by the r4000 pipeline
constraints.
* add _C_LABEL() macros to the r4000 locore.
Comitted to provide a snapshot for others to test, and work on a cleaner merge.
* add "MIPS_3k_" for the MIPS-I r[23]000-specific register definitions.
* add "MIPS_4k_" for the MIPS-II/III r4000-specific register definitions.
* add #defines that provide the old values for locore and user
code, so the existing code continues to compile.
Regression-tested against the old headers by grepping for #define's,
editing out the defined symbols, and preprocessing with both the previous
machConst.h headers and this version.
Some unused symbols (CPU and FPU must-be-zero constants) are no longer defined.
Pica interrupt masks are now constant expressions instead of constant
values.
TODO:
* factor out the common #defines into src/sys/arch/mips.
* Get rid of the Sprite coding-style names (MACH_xxx).
* Separate out the r3k/r4k differences from the Pica/pmax differences.
* Figure out how to have a run-time choice of r3k vs. r4k support,
instead of a compile-time choice.
* Delete pmax-specific functions and declarations from trap.c
* Delete mips-geeneric functions and declaratinos from pmax_trap.c
* Rename the function pointer used to handle hardware interrupts to
"mips_hardware_intr". Define it in trap.c. Change references elsewhere,
including machdep.c.
Verified to boot on a 5000/200.
* Add spl4() and spl5() functions from the Pica port.
* Add MachFPTrap() as an alternate entry point for MachFPInterrupt.
The r4k reports floating-point execptions as a trap, not an interrupt,
and the Pica port uses the name MachFPTrap().
* Add nops to the Mach_spl?() functions and MachFPInterrupt, as required
for the r4k port.
Commit "floppy" interrupt counter for vmstat -i.
always be eight digits.
Copy the kn02 memory-interrupt reporting function to the kn03 (5k/240)
memory-error handler, since the 3MAXPLUS seems to use the same ECC hardware
as the 3MAX.
Update the include-idempotency preprocessor token to match.
References to machAsmDefs in vendor (sprite, 4.4bsd) headers left unchanged,
for historical accuracy.
provide r3k and r4k versions of each, and move to sys/arch/mips/include.
Note in comments where each mips-based port should provide
definitions in its own cpu.h after including this file.
opcodes from the Pica port. Per Fogelstrom claims the latter are all
supposedly MIPS-II (r6000) instructions, rather than MIPS-III (R4000),
but we haven't checked to be sure. Are LL/SC really in MIPS-II?
CVS:: ----------------------------------------------------------------------
mycroft