8dfe5bc813
Apply patch from Jed Davis, posted to port-xen:
...
In pmap_remap_pages() new mappings are created (PG_RW|PG_M). When saving
a domain, the hypervisor will refuse to map the foreing pages RW.
As a temporary measure, retry the mapping read-only if PG_RW fails, so that
domain save will work. Also fix the PTP's wire_count if the MMU update
fails (prevent a kernel panic).
2005-09-10 15:46:04 +00:00
7558bd0a7c
Fix typo reported by Jed Davis on port-xen:
...
IOCTL_PRIVCMD_GET_MACH2PHYS_START_MFN is a read, not a write.
2005-09-10 15:41:54 +00:00
b92fde2f23
Remove KERNFS, it was only used to implement dmesg - the binary is smaller!
2005-09-10 14:53:34 +00:00
861ded3cb2
Make it compile for gcc 2.95.
2005-09-10 10:39:39 +00:00
e13c2b8b41
Add configuration file for 'PCMCIA adapter BOX' supported kernel.
2005-09-10 04:34:39 +00:00
45626bf3d9
ANSIfy.
2005-09-10 02:22:33 +00:00
8f3c0c67f1
Hanlde NMI on microSPARC-IIep.
...
We don't do much useful except reporting, but that's better than to
stupidly use sun4m handler and wedge the machine. May need to revisit
what's fatal.
Prodding by macallan@
2005-09-10 01:27:54 +00:00
531fd682f7
Add definitions for microSPARC-IIep memory fault registers.
2005-09-10 01:23:19 +00:00
5820e018a3
Add bitmask string for system interrupt pending register.
2005-09-10 01:01:40 +00:00
3355ba0044
u_intN_t -> uintN_t
2005-09-10 00:44:08 +00:00
60528befec
Link ip2xboot as OMAGIC by -N option for ld(1) as well as ip3xboot.
...
Tested by sekiya.
2005-09-09 17:27:18 +00:00
727527c99b
remove "dev" locators from cardbus device definitions, it doesn't
...
make sense technically and might be removed
2005-09-09 16:26:19 +00:00
03d7777e5c
PR/25658: Steve Woodford: Default value of net.inet.ipsec.dfbit breaks PMTU
...
over IPsec tunnels.
I have changed the default to 2 [copy]. I've verified that this works with
all my IPSEC setups, and this change has also been discussed in tech-net.
2005-09-09 15:38:05 +00:00
d8798fec66
- for pagecache dependency, track which page in the block
...
has been written or not individually by (ab)using b_resid
in pcbp as a bitmap.
- add a comment to explain why it's needed.
PR/15364. reviewed by Chuck Silvers.
2005-09-09 15:04:07 +00:00
5b4c989faf
revert the code to expand putpage requests to block boundary.
...
because:
- it was incomplete in some cases.
- it can confuse pagedaemon.
see PR/15364 for details.
2005-09-09 15:00:39 +00:00
1af44f3c6e
remove the useless (always 0) device number from cardbus driver state,
...
autoconf attach structures and configuration cycle functions
(just leave the kernel configuration attribute for now to avoid breaking
config(1) files)
2005-09-09 14:50:58 +00:00
1fbab2d81a
make this compile again (shadow and const warnings)
...
I doubt this serves any useful purpose.
2005-09-09 13:48:10 +00:00
1e85211578
Note xge addition.
2005-09-09 13:45:41 +00:00
2855760133
Enable WSDISPLAY_SCROLLSUPPORT by default.
2005-09-09 13:43:39 +00:00
fd6c232a7a
Allow a NULL pointer as argument to usb_get_next_event(), and don't
...
allocate a "struct usb_event" on stack in usb_add_event().
This gives just enough breathing space that the box doesn't die
immediately from stack overflow when I insert a
ohci0 at cardbus0 dev 0 function 0: Acer Labs M5237 USB 1.1 Host Controller
2005-09-09 12:04:30 +00:00
0217dc7934
Device driver for the Neterion (S2io) Xframe-I 10Gbit ethernet card.
...
Still missing: VLAN + IPv6 checksum support.
2005-09-09 10:30:27 +00:00
ac3f544e6d
fix compilation with debugging on.
2005-09-08 18:41:50 +00:00
e4efddfa8b
PR/31130: FUKAUMI Naoki: Fix vge(4) SIOC{ADD,DEL}MULTI handling
2005-09-08 18:18:10 +00:00
5b3a55a74a
This file no longer has "#if defined(MIPS3_4100)" so remove
...
"XXX MIPS3_4100 is still special" comment.
(though some other files still have "special" code which should go away)
2005-09-08 15:19:58 +00:00
e17fe7c64d
Initilize CP0 pagemask register properly.
...
Fixes PR 30590 and some other mips port.
2005-09-08 15:17:23 +00:00
95d5cf1493
Add mips3_cp0_pg_mask_write() to initialize pagemask register.
2005-09-08 15:13:23 +00:00
bd2843f4ab
Add definitions of Vr41xx specific pagemask values.
...
It supports 1k-256kbytes/page.
2005-09-08 15:11:43 +00:00
1797f37c06
fix parsing of some informational CIS tuples: correct length and handle
...
the case correctly where a string is terminated with 0x00 0xff
2005-09-08 15:02:48 +00:00
241cff4694
make use of the locator information: print "?" if a locator is
...
at its default value, and accept "?" in the "change" command
2005-09-08 14:58:14 +00:00
a531e09eeb
Revert incomplete (and possibly incorrect) sys_sa_preempt implementation
...
that I committed accidentally with the 64 bit inode changes.
2005-09-07 23:31:06 +00:00
14071aa79e
fix an obvious mistake where the original instruction
...
is restored after a simulated single-step,
also use VM_PROT_ALL to get maximal permission for patching
instructions instead of VM_PROT_DEFAULT whose semantics
are not that defined
2005-09-07 20:28:08 +00:00
caf67252d3
sync with next68k: include <sys/devive.h> explicitely because this is the
...
documented header for "evcnt" stuff
(should be separated, later)
2005-09-07 19:58:12 +00:00
8311fb86aa
namespace sanity: don't expose compatibility sigcontext stuff
...
unnecessarily
2005-09-07 19:42:51 +00:00
41f06eac8c
include machine/intr.h only in the _KERNEL case, as
...
most other ports do.
(In the -KERNEL case, it is needed because the spl*()
stuff ought to be pulled in by <sys/param.h> per the
manpages.)
This saves some namespace headaches.
2005-09-07 19:39:51 +00:00
9e7bc072c7
namespace sanity: kill includes which are not
...
used directly
2005-09-07 19:35:37 +00:00
0ffd1b3340
include <sys/devive.h> explicitely because this is the
...
documented header for "evcnt" stuff
(should be separated, later)
2005-09-07 19:33:20 +00:00
d1e2d78dee
Use ``l'' and not ``curlwp''. Thanks to Peter Postma for catching this.
2005-09-07 18:06:04 +00:00
348574574d
Implement curtain for AF_INET{,6} PCB lists.
2005-09-07 17:58:13 +00:00
fb3e9eee95
Implement curtain for AF_LOCAL PCB lists.
2005-09-07 17:38:44 +00:00
bc433a82fb
Implement curtain in KERN_{PROC,PROC2,FILE,FILE2,PROC_ARGS}.
...
While I'm here, disable curtain by default.
2005-09-07 17:30:07 +00:00
31681c214e
Should check if curtain is enabled before doing the user-id check.
2005-09-07 17:27:55 +00:00
ec14f2d11e
Introduce ``security.curtain'', new node for security features and
...
settings, and new variable for controlling access to objects based
on user-id.
2005-09-07 16:26:15 +00:00
15b43e830c
Introduce CURTAIN(user_id, object_id) - a macro that essentially checks
...
if user_id is either 0 or equals to object_id. We don't always have a
struct ucred to use, so we need this at the very basic level.
2005-09-07 15:11:54 +00:00
52dfe86ca8
With the assistance of dyoung, fix the following problems:
...
* some 8180L cards need a longer time for the srom to initialize; patch
suggested via OpenBSD.
* some cards give '0' for USA, some give '3'; for the meantime, accept both
as being USA locale cards.
* this is RTW, not ATW. :)
2005-09-07 05:25:41 +00:00
e9e04d00b0
add SiS id 0x0457
2005-09-07 01:34:19 +00:00
ad2ddf6d2d
Revert previous accidental removal of -DINET6
2005-09-06 23:27:33 +00:00
12184b6c26
Revert inappropriate -D additions.
2005-09-06 23:25:54 +00:00
04d00c8e39
Cleanup and fix cd_size() function; it was returning wrong results.
...
Also factor out read_cd_capacity()
2005-09-06 22:19:14 +00:00
f4cc8f97e3
make the "tags" target work again by using the common trick of splitting some
...
of the arguments to ctags using echo start-of-xxx | xargs ctags rest-of-xxx
2005-09-06 21:57:47 +00:00
aece7a90fd
Change the driver open function's conditional for overriding exclusive tty
...
use from checking the proc's uid to suser(9), and account for the use of
privileges. Noted by David Holland in PR kern/31126.
2005-09-06 21:40:37 +00:00
bouyer