0d29172def
Do a VOP_UNLOCK() before a vn_close().
1999-02-23 23:53:37 +00:00
281bba9355
Update for minor changes in the ad1848 back end.
1999-02-23 21:16:27 +00:00
eab52d94b3
Fixed AdvanSys Ultra Wide driver to work on Alpha.
1999-02-23 20:18:16 +00:00
fad6371a16
Update for recent changes in wssvar.h.
1999-02-23 09:14:05 +00:00
d6715660b7
- Introduce the first cut of faster wsdisplay_emulops exploiting SFB
...
accelerator potential. Need more work to finish replacing rcons.
Premilinary tests were done with DECstation and TC Alpha.
1999-02-23 06:34:49 +00:00
71036465a5
In cy693_setup_channel(), setup timings for IOR too (they were left to 0,
...
which is a way too higth timing for some devices). Thanks to Ken Wellsch
for trying the multiple debug kernels until the problem was located.
1999-02-22 10:12:00 +00:00
71eb5693e6
Use DMAMODE_DEMAND.
1999-02-22 03:24:33 +00:00
10817df7f0
Oops; remove obsolete code.
1999-02-22 02:33:48 +00:00
bd575a4ff6
Add support for demand mode with auto-init.
1999-02-22 02:32:43 +00:00
529c6c50aa
Use DMAMODE_LOOPDEMAND. Tested on a CS4231 in a WSS clone.
1999-02-22 02:25:20 +00:00
7da867ec93
Use DMAMODE_LOOPDEMAND. Tested on a ViBRA16.
1999-02-22 02:16:40 +00:00
ea50d6f672
Use DMAMODE_LOOPDEMAND.
...
Fixes the audible glitches (due to FIFO underruns) when receiving network
packets on the Shark.
1999-02-22 01:57:33 +00:00
fc658e2d3e
Don't update the CORx registers unless they really have changed.
...
Also make console Tx handling wait until the Tx FIFO has drained and
the shift-register is empty before sending console characters.
1999-02-21 14:01:50 +00:00
b86f85e1cc
wdcwait is called initially without any device on my thinkpad.
...
This breaks the first WDCDEBUG_PRINT. Handle this case.
1999-02-21 02:07:52 +00:00
ed418e30a2
Only define WDCDEBUG if not already define (e.g. by kernel option)
1999-02-21 00:52:04 +00:00
37a9e5bb67
Only define WDCDEBUG if not already defined (e.g. by some kernel option)
1999-02-21 00:15:42 +00:00
99626f33a3
Only #define WDCDEBUG if it isn't already defined (e.g. by some options
...
in the kernel config file).
1999-02-20 23:47:52 +00:00
b81ad0de61
Fix the halt_input and halt_output routines to actually disable the channel,
...
not just the DMA FIFO. Fixes problems with sample misalignment.
1999-02-20 23:28:37 +00:00
5113c5b9c0
Move the bus reset up. This makes the VIA chipset work. From FreeBSD.
1999-02-20 23:26:16 +00:00
bd047d30a0
complete mapping table for pcvt fonts, make dual-font selection work
...
as intended
1999-02-20 18:27:53 +00:00
9ad8930d16
complete mapping tables a bit so that ASCII (ie vt100) art looks better
...
even without extra fonts loaded
1999-02-20 18:26:13 +00:00
cc294f2cc5
complete the font tables for the DEC special fonts; assign some codes
...
from the private Unicode area (0xe000 ff.) to stuff I didn't find in
the Unicode database
1999-02-20 18:20:02 +00:00
3a5b0d88ca
That #define splserial() really didn't want to be there...
1999-02-20 16:23:39 +00:00
ea05c3b739
Fix typo.
1999-02-20 07:07:07 +00:00
0ed9dc11d7
Delay serial port parameter changes until the Tx FIFO has emptied.
1999-02-20 00:27:29 +00:00
ab9ab83d05
Add ID for IBM 'PCMCIA Portable CD-ROM Drive'. We only have one of these and it
...
may be broken (it choked under Windows), but it at least now probes.
1999-02-19 21:49:43 +00:00
e54f78017e
This one needs <machine/bswap.h> too.
1999-02-19 20:58:51 +00:00
598b05da47
Regen.
1999-02-19 19:12:09 +00:00
d9c29083d4
Improve descriptions for DEC Ethernet chips.
1999-02-19 19:11:33 +00:00
35399992bb
Indicate whether the decive is full or half duplex at attach time.
1999-02-19 17:09:16 +00:00
1790450d8c
Fix structure names.
1999-02-19 16:59:36 +00:00
38803874bb
Translated Japanese comments.
1999-02-19 16:19:53 +00:00
4449a6ef39
Kill vestiges of isa_establish().
1999-02-19 16:15:06 +00:00
4822d3d0b0
Move IRQ setup into frontend. Need to move DRQ handling as well.
1999-02-19 16:10:44 +00:00
c6c74098d0
Don't try to use the MII routines for the internal PHY.
1999-02-19 14:57:00 +00:00
3f8a09bba4
Improve product descriptions, and add 3c905-FX and 3c980 Server Adapter
...
products.
1999-02-19 06:58:42 +00:00
7248c3be19
Improve card descriptions.
1999-02-19 06:57:56 +00:00
02df2bd5a5
Regen.
1999-02-19 06:56:53 +00:00
1128dd593e
Improve the descriptions of 3Com Ethernet cards, and add the 3c905B-FX
...
and 3c980 Server Adapter products.
1999-02-19 06:55:15 +00:00
3a63b5db2a
Regen.
1999-02-19 05:53:36 +00:00
f43c45889a
Add several Tulip clone chips.
1999-02-19 05:53:00 +00:00
c07be2882b
- Make sure SFB ROP register initialized with value 3.
...
- Turn off video signal during hardware initialization.
1999-02-19 03:42:42 +00:00
28bc4dfeca
Oops; PCIC_INTR_ENABLE does something *very* different.
1999-02-19 03:14:00 +00:00
58d4d7e933
Regen.
1999-02-19 02:53:06 +00:00
6b150eb8f6
Fix typo.
...
XXX fix Makefile.pcmciadevs to catch this sort of thing.
1999-02-19 02:52:17 +00:00
bd4cd051b9
This is an utterly revolting hack to work around the previously mentioned
...
lossage. On the Alpha, we force the buffers to be allocated through the SGMAP
so that the PCI bus addresses are low enough.
At least it's only one line of code...
1999-02-19 02:27:59 +00:00
6e788dfcb5
Regen.
1999-02-19 00:44:15 +00:00
3300c6ba4b
Add Fujitsu SCSI 600 card
1999-02-19 00:43:00 +00:00
70d4ac07b6
Yet another path where we need to set PCIC_INTR_ENABLE.
1999-02-19 00:27:45 +00:00
f2c4e7f8bd
Use the correct interrupt sharing type, and set PCIC_INTR_ENABLE(!).
1999-02-18 23:41:40 +00:00
74028ea9fd
Regen.
1999-02-18 22:32:27 +00:00
b71baddba7
Add ID for MagicRam SwapBox PCMCIA controller card.
1999-02-18 22:31:32 +00:00
a473ed5477
Fix omission in previous.
1999-02-18 19:24:39 +00:00
18e341a954
Add separate halt_input and halt_output methods in ad1848_isa, which disable
...
the DMA channel.
1999-02-18 17:27:39 +00:00
9907eda026
spaces -> tabs
1999-02-18 16:09:01 +00:00
81bc49921a
Remove some superfluous softc elements.
1999-02-18 15:47:29 +00:00
7e5acb7709
Don't print an extra newline if the controller doesn't support 32 bits access.
...
Pointed out by Dave Huang.
1999-02-18 14:45:31 +00:00
e96144a012
Add a missing ':'. pointed out by Dave Huang.
1999-02-18 14:44:34 +00:00
699a815751
Pass the correct address (PCI bus address, not PA) to the card.
...
Also fix some typos and add more debugging printf()s.
This would work on the Alpha, but the card I have appears to have the upper
address bits chopped off, and the ring buffer gets mapped using the DGMAP,
which uses the upper bits. Boom.
1999-02-18 09:22:17 +00:00
e0b748e50c
Pass the correct address (PCI bus address, not PA) to the card.
...
Works on an Alpha now.
1999-02-18 07:59:30 +00:00
5e2fc07a14
Add separate halt_output and halt_input routines.
1999-02-18 07:08:35 +00:00
c02bf3c4d7
Minor code munging.
1999-02-18 05:46:38 +00:00
cfb2342145
Fix the code in epic_attach() that frees resources when the attach fails.
1999-02-18 02:24:30 +00:00
5c457e71fe
Only do the multicast filter bug work-around if in 10Mbps mode. Also,
...
don't reset the interface if the multicast list changes. Just reprogram
the multicast hash table.
1999-02-18 02:12:09 +00:00
982603ce5b
Don't reset the interface when the media changes.
1999-02-18 01:24:29 +00:00
78e18b8d8c
Back out to the previous stable revision of the fxp driver. The latest
...
one had too many stability problems.
1999-02-18 01:23:41 +00:00
6ce15ae4e3
spaces -> tabs
1999-02-18 00:55:36 +00:00
f1e84a4ec5
A few things:
...
* Use the trigger interface.
* Permit different encodings for record and playback.
* Set AUDIO_PROP_INDEPENDENT.
* Fix the mmap(2) hole again.
* Use 16-bit mode for a-law and u-law playback.
1999-02-18 00:54:19 +00:00
8b7b7cccc7
Fix a silly type.
1999-02-17 23:55:18 +00:00
27963c294a
Use the trigger interface, and clean up a pile of cruft.
1999-02-17 23:05:28 +00:00
71105fbda7
Update comments.
1999-02-17 21:44:55 +00:00
6d0cb6e410
Change a straggling splimp -> splnet.
1999-02-17 09:11:29 +00:00
69a4436f8b
Avoid initializing the interface in the SIOCSIFFLAGS if ! UP and ! RUNNING.
1999-02-17 03:40:59 +00:00
7741cae143
Fix slight ommission in previous.
1999-02-17 02:43:13 +00:00
e5f5e628d2
Pass the direction to the allocm and round_buffersize methods.
...
Some drivers need this to properly allocate DMAable memory.
1999-02-17 02:37:38 +00:00
88ad3aa42b
If we have an 8-bit DRQ, always pass that to isa_malloc().
1999-02-17 01:22:47 +00:00
2c7fa23c38
Fix Copyright dates
1999-02-16 23:34:10 +00:00
dc068e0d1f
Assign my files to The NetBSD Foundation, Inc.
1999-02-16 22:46:55 +00:00
2ccd5cde74
Correctly compute PIO/DMA mode for sis and acer chips when the drive support
...
a DMA mode with higther capabilities than PIO mode.
1999-02-16 18:11:52 +00:00
d683e62685
Be less strict on ATAPI signature, at last one CD puts 0x00 in sc instead
...
of 0x01.
1999-02-15 18:47:59 +00:00
13e811e874
Revert to 1.23, this was not supposed to be checked in yet.
1999-02-15 18:43:08 +00:00
18496766b2
For CDIOCCLOSE, ignore media changes, as some drive seems to return this
...
info here.
1999-02-15 18:41:04 +00:00
379429d4df
If the REQUEST_SENSE command fails, issue a reset instead of XS_DRIVER_STUFFUP.
...
If REQUEST_SENSE succeeds but doens't return any data, return XS_SHORTSENSE
as the sense field will just contain a copy or the error register.
1999-02-15 18:40:01 +00:00
56f2d188fc
RCS ID police
1999-02-15 04:54:34 +00:00
fd9002550c
Make the reset even longer do cater for really bad devices.
1999-02-15 00:32:16 +00:00
210b267f84
Regen from pcidevs.
1999-02-14 22:44:36 +00:00
acb24b6080
Add 3Dfx's Voodoo II. Fixes PR kern/7000 by Brett Lymn.
1999-02-14 22:38:18 +00:00
e523f4968b
Make sure full-duplex is reflected in TXCON, and don't reset the interface
...
when the media changes.
1999-02-13 21:08:08 +00:00
4d5a04afc4
MI version of the Fujitsu MB89352 SCSI Protocol Controler (SPC) driver.
...
Based on experimental NetBSD/pc98 ISA/PISA version, which was derived
from the MD /sys/arch/x68k/dev/spc.c.
1999-02-13 17:33:14 +00:00
94719c7b9a
New MI front-end for the Cirrus Logic CD240[01] Multi-protocol
...
Communications Controller.
This is still a work in progress, but it is functional enough to
be usable.
1999-02-13 17:05:19 +00:00
70b91539e9
Restructure the interrupt handler and 1-second timer a bit, and tidy up
...
the lazy-transmit-interrupt logic, fixing a few minor logic problems.
Now unable to reproduce the lockup problem described in PR #6767 . Changing
PR's state to "feedback".
1999-02-13 02:12:59 +00:00
960dfa5227
oops - forgot to convert the trivial case (ASCII) to "match levels"
1999-02-12 15:49:43 +00:00
525932e022
make the probe stricter to catch cases where the chipset doesn't pull
...
the data lines to "high" for not-existant devices
1999-02-12 12:45:48 +00:00
b515442160
Display the danish o-slash as phi/Theta as proposed by
...
Soren S. Jorvang <soren@t.dk>, with a lower match level.
Display the other accented characters which are not present in the IBM
character set by their non-accented equivalents, with an even lower
match level.
1999-02-12 11:32:50 +00:00
dbdaf91650
change the "mapchar" interface to return a "quality" or "match level"
...
arguments which allows to find approximations for characters which are
not present in a font
1999-02-12 11:25:23 +00:00
2414f4ac80
"NEXT" is a keyboard type, not a keymap variation.
1999-02-12 11:14:49 +00:00
e8823cc3f3
Cleanup of the EPIC/100 driver I did while hacking on the Rhine driver:
...
* Macroize hardware and software descriptor access (much easier to read).
* Simplify and optimize the transmit loop a bit, and use IFF_OACTIVE as
appropriate.
* Fix a potential race condition in the transmit loop. This change has
made the driver significantly more stable (almost completely eliminated
the "device timeout" errors that have plagued this driver).
* Implement transmit interrupt pacing.
* Add missing bus_dmamap_sync() calls (on transmit and receive descriptors
and fraglists). (Draining the write buffer when accessing these structures
may have also contributed to the increased stability of this driver on
the Alpha.)
1999-02-12 05:55:27 +00:00
873e1d2a51
Fix printf format problems on Alpha.
1999-02-12 01:51:37 +00:00
1ab6db8e5f
Fix printf format problems on Alpha.
1999-02-12 00:50:09 +00:00
94962b67c7
Fix some printf format problems on Alpha.
1999-02-12 00:46:11 +00:00
oster