(netinet6/{ip6,icmp6}.h is non-standard path - these files should go away)
it was not possible to use cvsmove in this case.
when you try to look at history, chase it toward netinet6/{ip6,icmp6}.h.
cause a core to drop, and whether the core dropped, or, if it did
not, why not (i.e. error number). Logs process ID, name, signal that
hit it, and whether the core dump was successful.
logging only happens if kern_logsigexit is non-zero, and it can be
changed by the new sysctl(3) value KERN_LOGSIGEXIT. The name of this
sysctl and its function are taken from FreeBSD, at the suggestion
of Greg Woods in PR 6224. Default behavior is zero for a normal
kernel, and one for a kernel compiled with DIAGNOSTIC.
Otherwise, the NEC MobilePro 770 chooses the wrong one.
This is consistent with keymap searching order from before revision 1.12,
although I haven't investigated why choosing the last match instead of the first
causes the MobilePro 770 to lose
of adjacent DMA segments.
XXX This is still not perfect... but making it perfect will probably
require additions to the bus_dma interface and the ISA autoconfiguration
interface.
Add the support to boot an ide slave drive and to boot from the secondary
ide channel.
Michael Hitch gave me the final hint how to do that and Havard Eidnes
tested it with his slave drive.
This should fix pr#8808 on the DS10.
Also remove one ideboot check which wasn't removed when I removed it from
dec_eb164.c.
ide channel.
Michael Hitch gave me the final hint how to do that and Havard Eidnes
tested it with his slave drive.
This will also fix pr#8808 on the DS10 when I commit the changes to
dec_6600.c.
on an A1200 yet. Configuration of wdc/atapi in GENERIC is currently
commented out to prevent the suprise of an IDE drive changing from sd0
to wd0 (and the first real SCSI drive changing from sd1/sd1 to sd0).
Note: enabling these will cause disk device renumbering if any IDE were
present (i.e. if sd0 was IDE drive 0, that drive will become wd0 and sd0
will be the first real SCSI drive.
eeh