to match its use in pci_bus_maxdevs. This makes it the same as pci_conf_read
and pci_conf_write.
Change all struct device * to device_t.
[Obviously nothing ever used the first argument to pc_bus_maxdevs since it
could have never worked because it wasn't being passed a pci_chipset_tag_t.]
- Replace most remaining uses of l_addr with uvm_lwp_getuarea() or lwp_getpcb().
- Amend assembly in ports where it accesses PCB via struct user.
- Rename L_ADDR to L_PCB in few places. Reduce sys/user.h inclusions.
This allows use of subr_disk_mbr on all archs. Default to it for
the rump disk component. No functional change for regular kernels.
(The other option would've been to include dkbad in disklabels
everywhere, but arguably this approach has less possible side-effects,
especially given that wedges and related magic will take over the
world any second now).
- renamed to MEMORY_DISK_RBFLAGS to better fit the rest of the
MEMORY_DISK options(4)
- change default value to RB_AUTOBOOT instead of RB_SINGLE, and adapt
the config(5) files accordingly
- document this option inside options(4)
See also http://mail-index.netbsd.org/tech-kern/2008/12/25/msg003924.html
Reviewed by abs@ in private mail.
doshutdownhooks(9): shutdown hooks registered by shutdownhook_establish(9)
expect to be called with interrupts disabled, but shutdown hooks
registered with pmf_device_register1(9) expect to be called with
interrupts enabled. So I have made two changes:
1 Do not call pmf_system_shutdown() from doshutdownhooks(). Instead,
change every call to doshutdownhooks() to a call to doshutdownhooks()
followed by a call to pmf_system_shutdown(). No functional change
is intended by this change.
2 Make i386 re-enable interrupts briefly while it calls
pmf_system_shutdown(). I leave it to others either to fix the
other ports, or to factor out some MI shutdown code, as joerg@
suggests, and fix that. Note that a functional change *is* intended
by this change.
I hope that this patch will stop us from flip-flopping between
calling doshutdownhooks() and pmf_system_shutdown() sometimes with
and sometimes without interrupts enabled.
bank registers from the PCI host bridge. Previously the RAM size was
hardcoded to 64MB.
Also fill out ibm82660reg.h with more definitions from the PowerPC to
PCI Bridge and Memory Controller User's Manual.
Many thanks to Tim Rightnour for helping with this patch.
a release build again. The GENERIC kernel is used to build install media
in distrib/ibmnws/netboot/kernel, and without the md(4) area in place,
mdsetimage becomes unhappy.
Pointed out to rjs (who removed md(4) in revision 1.31), but now
committed due to feedback time-out, and because I've verified that
this fixes the build.
them in the mi "files" file, and remove include statements from md files.
These shouldn't pull in additional kernel code when not in use, so it
shouldn't do any harm except a risk of namespace collisions which
should be easy to fix.
possibility of running on an MPC601, are infected with all the extra code
and nops that it added.
Also, fix compilation that I broke with the pmap code, by adding
oeacpufeat to the locores of various ppc arches. Noted by mlelstv.
- Reduce available SPL levels for hardware devices to none, vm, sched, high.
- Acquire kernel_lock only for interrupts at IPL_VM.
- Implement threaded soft interrupts.
This branch was a major cleanup and rototill of many of the various OEA
cpu based PPC ports that focused on sharing as much code as possible
between the various ports to eliminate near-identical copies of files in
every tree. Additionally there is a new PIC system that unifies the
interface to interrupt code for all different OEA ppc arches. The work
for this branch was done by a variety of people, too long to list here.
TODO:
bebox still needs work to complete the transition to -renovation.
ofppc still needs a bunch of work, which I will be looking at.
ev64260 still needs to be renovated
amigappc was not attempted.
NOTES:
pmppc was removed as an arch, and moved to a evbppc target.
- finish implementing splraiseipl (and makeiplcookie).
http://mail-index.NetBSD.org/tech-kern/2006/07/01/0000.html
- complete workqueue(9) and fix its ipl problem, which is reported
to cause audio skipping.
- fix netbt (at least compilation problems) for some ports.
- fix PR/33218.
- Remove the PCN_NO_PROM option. Instead, query the am79c970-no-eeprom
property, and read the MAC address from the CSRs if that property is TRUE.
In the ibmnws port:
- Implement device_register().
- In device_register(), set the am79c970-no-eeprom property for the
built-in Ethernet.
- Add COMPAT_15 to all the kernel that had COMPAT_14, for the sake of coherency
- Remove the only occurences of #ifdef COMPAT_15 in the tree: for the ARM
ports, COMPAT_15 was always used in conjunction with EXEC_AOUT. Only EXEC_AOUT
matters here.
This address kern/18407
