db105fc687
Make vtophys() return non-zero even if the addr < end.
1998-07-25 15:06:28 +00:00
9043581b85
define RISCom and RISCom N2 product
1998-07-25 11:57:50 +00:00
d83ea88a76
define DLT_HDLC
1998-07-25 11:31:18 +00:00
401f1157b0
Use atomic operations for DraCo interupt registers
1998-07-25 11:01:11 +00:00
d97448cc55
back to previous one.
1998-07-25 09:47:27 +00:00
2a78f6986c
no semicolon, please
1998-07-25 09:24:17 +00:00
3d0dcc7181
This has been in amiga/amiga/mtpr.h for a long, long time.
1998-07-25 07:21:20 +00:00
67ec8587a0
Provide wsmouse attachment for the USB mouse driver.
...
XXX Keep /dev/ums* for now since XFree86 does not understand wsmouse yet.
1998-07-25 01:46:38 +00:00
f0ff548dd2
Rewrite the probe to use values from the EEPROM for membase and IRQ
...
if they're not specified by the attach arguments, so that they can
be reported by isaprint(). Rearrange the attach routine to facilitate
splitting this up into front- and back-end drivers.
1998-07-25 01:15:54 +00:00
43a04e85ab
Another printf(%:) down.
1998-07-25 00:42:03 +00:00
930937fd49
Define the CS8900 memory size, and macros to test for valid memory
...
base and IRQ.
1998-07-25 00:41:47 +00:00
b4195e59cd
Change the interface to the EEPROM functions such that they can be called
...
from the probe routine.
1998-07-24 23:25:13 +00:00
260b2a20f2
Provide PMAP_{,UN}MAP_POOLPAGE().
1998-07-24 22:03:33 +00:00
b916de0f86
Add special memory allocation routines that supports allocation
...
DMA-able memory in small chunks (USB uses a lot of 8 byte chunks).
Using the bus_dma functions directly is inefficient.
1998-07-24 21:09:07 +00:00
91f18e727f
Remove conditionals on SUN4C+SUN4M.
...
A few cosmetic changes.
1998-07-24 21:08:16 +00:00
06e7ed2009
Make sure requests are aborted properly when the pipe is aborted.
1998-07-24 21:02:51 +00:00
1a5dd77c56
Punt if the mouse reports absolute coordinates.
1998-07-24 20:59:57 +00:00
b79d954aac
Let hid_locate() return the item flags as well as the position.
1998-07-24 20:57:46 +00:00
1ca186e04d
G3 Macs also needs to fix pci io/mem enable bits.
1998-07-24 20:53:57 +00:00
bf51a1d137
uvm_deallocate() takes an address and a size, not an address range. From
...
ITOH Yasufumi <yasufu-i@is.aist-nara.ac.jp>, PR #5834 .
1998-07-24 20:47:59 +00:00
2385ee5eca
Provide PMAP_{,UN}MAP_POOLPAGE().
1998-07-24 20:32:07 +00:00
8325d058bf
Implement uvm_km_{alloc,free}_poolpage(). These functions use pmap hooks to
...
map/unmap pool pages if provided by the pmap layer.
1998-07-24 20:28:48 +00:00
6127f55620
Implement kmem_{alloc,free}_poolpage(). These functions use pmap hooks to
...
map/unmap pool pages if provided by the pmap layer.
1998-07-24 20:27:26 +00:00
fc4828b0b4
A few small changes to how pool pages are allocated/freed:
...
- If either an alloc or release function is provided, make sure both are
provided, otherwise panic, as this is a fatal error.
- If using the default allocator, default the pool pagesz to PAGE_SIZE,
since that is the granularity of the default allocator's mechanism.
- In the default allocator, use new functions:
uvm_km_alloc_poolpage()/uvm_km_free_poolpage(), or
kmem_alloc_poolpage()/kmem_free_poolpage()
rather than doing it here. These functions may use pmap hooks to
provide alternate methods of mapping pool pages.
1998-07-24 20:19:23 +00:00
7d8833a179
Put back swap_data_lock, which was apparently deleted accidentally during
...
the last round of changes. (I noticed it because I run my kernels w/
LOCKDEBUG.)
1998-07-24 18:46:02 +00:00
658e297dd6
Initialize the new "dispoffset" (but don't use it for anything fancy).
1998-07-24 16:22:51 +00:00
3d545acb51
Overload the generic "copyrows" function by a private one which implents
...
a "fast scroll" by setting the display start in memory.
(Only implemented for "scroll up" because this is more used. "scroll down"
is easy to add.)
This moves the semantics of "copyrows" to something like "moverows";
the contents of the new visible lines at the bottom is undefined.
The emulations can live without the original "copy" semantics.
1998-07-24 16:20:14 +00:00
7764b57db5
allow the displayed area to start anywhere in display memory,
...
add a "dispoffset" variable to control this
1998-07-24 16:12:18 +00:00
5cc05df4ca
Comment out "insert root disk..." message.
...
Remove unnecessary video init.
1998-07-24 15:52:04 +00:00
d33dfcd7dc
Coda glue
1998-07-24 15:40:42 +00:00
b1d69203b3
Coda glue
1998-07-24 15:18:21 +00:00
5f9682b601
Calculate DELAY constant before configure().
1998-07-24 14:40:40 +00:00
e81ad8e2c6
add random generator hook
1998-07-24 13:42:29 +00:00
6dc9297499
remove unneeded typecast
1998-07-24 13:41:52 +00:00
1c2f0a15fd
Don't create the extent region pool until one of our callers is of the
...
opinion that it's safe to call malloc.
1998-07-24 06:40:45 +00:00
8ba3494f9a
Deal with new pool code's changed API by rewriting this to not use pools.
...
Instead, use a manually maintained freelist in a second tailq.
Uses less data space, looks more symmetrical.
1998-07-24 03:29:29 +00:00
4eeeee6a7c
Print a complaint when no children were specified
...
in the config file. Better than a link error...
1998-07-23 23:48:33 +00:00
4a15b6ba7d
Make this like the other redirect includes.
1998-07-23 23:47:02 +00:00
7e0d396bf4
Add xyc to the dev/xy.c line, similar for xd.
1998-07-23 23:45:24 +00:00
f836b9e8d3
Drop private page table list maintenance; use memory pools instead.
1998-07-23 21:42:40 +00:00
4e465abf3f
Use a memory pool instead of malloc to allocate region descriptors.
1998-07-23 20:57:17 +00:00
a96abe7092
Update pool_* functions to new interface.
1998-07-23 20:52:01 +00:00
363f729ada
Use memory pools to allocate swap buffers. Allocations are all dynamic;
...
in particular `nswbuf' is gone, as is the private "struct buf" list that
was previously maintained in here.
1998-07-23 20:51:09 +00:00
20f05a4bb5
Include pool_drain() in page scans.
1998-07-23 20:36:09 +00:00
73ffa498ec
Define M_POOL.
1998-07-23 20:34:59 +00:00
e32923a128
Re-vamped pool manager.
...
* support for customized memory supplier
* automatic page reclaim by VM system
* time-based hysteresis
* cache coloring (after Bonwick's "slabs")
1998-07-23 20:34:00 +00:00
1253bfdf46
Utilize the centralized probe function.
1998-07-23 19:32:42 +00:00
fe7d31fe1e
First-gen
1998-07-23 19:31:36 +00:00
bdb2269a46
Create a master list of pnp logical and compatibility device codes instead
...
of hard-coding it into each driver and use a centralized probe function.
1998-07-23 19:30:44 +00:00
8d611b5f32
Remember the product ID and revision.
1998-07-23 19:25:52 +00:00
d2bc077edb
G/c a now unsed config flag.
1998-07-23 19:03:11 +00:00
1c9aed40f6
Round-out full-duplex support.
1998-07-23 19:02:55 +00:00
31177b97e7
In usercodes, we use getpagesize() instead of NBPG.
1998-07-23 18:15:57 +00:00
458ba64f3a
Slight variation on last; be a bit more zealous about fixing up the
...
clock source. Now, when my EtherPower II locks up, it eventually recovers!
(Geez, I'd like to know why it does this, and only apparently in 10mb/s mode).
1998-07-23 17:37:38 +00:00
c4c3297772
update comment ("John F. Woods" <jfw@funhouse.com>, PR kern/5798)
1998-07-23 16:39:24 +00:00
56a5adfaff
Switch keyboard to "event mode" on open.
...
Nuke wskbd_set_translation(). It doesn't fit into the "screen" model.
1998-07-23 14:33:01 +00:00
d6ef9cbb33
Add some comments and a function to set the alternate settings in an
...
interface.
1998-07-23 13:44:21 +00:00
8cdf268a45
Implement bulk transfer for OHCI.
1998-07-23 13:41:04 +00:00
217addc8de
Option DDB_ONPANIC needs a value.
1998-07-23 13:03:23 +00:00
7cdf5d9a77
retry disk accesses (for shaky floppy drives)
1998-07-23 09:59:44 +00:00
c263b1d26f
Don't leak memory if opening a pipe fails.
1998-07-23 09:18:37 +00:00
84840da908
in_pcballoc(): we can't afford to wait for memory.
1998-07-23 08:24:33 +00:00
964fdc18b8
Use the pipe maximum packet length rather than the device max length when
...
setting up a transfer.
Update the UHCI data toggle correctly.
1998-07-23 01:46:27 +00:00
0f40401a23
Fix bug in freeing TD chain after bulk transfer.
1998-07-23 00:27:36 +00:00
202d438148
CS8900 driver has of_network_dev property.
1998-07-22 22:09:59 +00:00
c10c18b955
Get media from OpenFirmware.
1998-07-22 22:09:18 +00:00
daf40e1b0b
Add common OpenFirmware network interface functions. Currently supports
...
decoding the `supported-network-types' and `chosen-network-type' properties
into ifmedia words.
1998-07-22 22:04:14 +00:00
04e498dae6
Change from "-G 0" to "-G0" for egcs.
1998-07-22 19:59:21 +00:00
0751419914
Back out previous change. It breaks Seyon in a non-obvious way.
1998-07-22 19:13:02 +00:00
4c50fd2165
regen
1998-07-22 17:43:11 +00:00
28f1e61164
add IDs for ACC Micro 2051 "PCI Single Chip Solution"
1998-07-22 17:41:04 +00:00
101f67646c
Add '<ufs/ufs/dinode.h>' to the include list. (Julian Coleman)
1998-07-22 12:49:42 +00:00
40060e366e
Loop over all configurations when trying to probe for interface drivers.
1998-07-22 12:22:08 +00:00
e6efe5f7e9
Regen
1998-07-22 11:48:58 +00:00
194f94bd97
Don't print bogus info about vendors in pcmciadevs_data.h
...
(Reported by John Kohl)
1998-07-22 11:47:13 +00:00
f190634e3d
Add an Acer labs USB controller.
1998-07-22 10:43:37 +00:00
05ff8b05f5
Print the default media at attach time.
1998-07-21 23:09:25 +00:00
02ad0b4eda
Add support for ifmedia.
1998-07-21 22:58:31 +00:00
d3882c1b56
Define autonegotiation bits.
1998-07-21 22:27:33 +00:00
3db796d287
Define a couple more of the PacketPage registers.
1998-07-21 22:04:13 +00:00
aaa383804d
Correct the name of the CS8920M id.
1998-07-21 19:54:56 +00:00
88a0132aec
Correct the name of the CS8920M id, and fix some whitespace lossage.
1998-07-21 19:54:19 +00:00
cc035ff82e
Oops, I forgot to commit this with bus_dma stuff.
1998-07-21 18:01:30 +00:00
0f572b1caa
Preserve OpenFirmware's msr and use it in openfirmware().
1998-07-21 17:53:50 +00:00
49bb9d8214
adapt to LANCE driver split
1998-07-21 17:36:01 +00:00
68f2474820
adapt to LANCE driver split; let PCNET/PCI use the 32-bit mode
1998-07-21 17:30:26 +00:00
9a59784f70
Split the LANCE driver into a part specific to the classic chip with
...
24-bit DMA addresses, and an independant part.
Implement support for the 32-bit mode in the newer (79c9xx) chips.
1998-07-21 17:26:45 +00:00
f520c72417
complete the options in opt_nfs_boot.h
1998-07-21 17:00:07 +00:00
cca4e566a9
Implement a better fix for the `gratuitous FIN' problem, as
...
mentioned on tcp-impl but with a bit more commentary.
1998-07-21 10:46:00 +00:00
dc08679458
Fix ioctl definitions for WSKBDIO_{SET,GET}LEDS.
...
from Takuya Koumoto <takuya-k@is.aist-nara.ac.jp>
1998-07-21 09:17:33 +00:00
3780fa036e
Add RCS IDs.
1998-07-21 07:48:36 +00:00
fc42c3b81d
Continued work on the esp scsi driver. Not yet working, but progress continues.
1998-07-21 06:17:35 +00:00
52cfd19bcf
Ever closer to KNF.
1998-07-21 01:17:14 +00:00
bb3c5257c7
Move the cs8900 driver's softc, etc. definitions to an MI location.
1998-07-21 01:04:55 +00:00
133efc841f
Use <dev/isa/cs89x0var.h>
1998-07-21 01:04:09 +00:00
0611893e60
Move the cs8900 driver's softc, etc. definitions to an MI location.
1998-07-21 01:04:01 +00:00
9c9a866a90
Move PacketPage read/write macros in to if_csvar.h
1998-07-21 00:58:46 +00:00
bdc9dcbe8a
G/c two more unused definitions.
1998-07-21 00:53:57 +00:00
23efef79fc
Move the code that prints Rx errors into a separate function, rather than
...
duplicating it.
1998-07-21 00:52:15 +00:00
9282418a78
Some cosmetic changes.
1998-07-21 00:40:17 +00:00
0987caaee6
G/c unused definition.
1998-07-21 00:39:21 +00:00
20fb09c609
G/c more unused debugging goo.
1998-07-21 00:24:45 +00:00
6014ea2216
Garbage-collect some unused debugging goo.
1998-07-21 00:23:18 +00:00
f45804c4c6
Nuke sc_iobase (and a serious misuse of it!)
1998-07-21 00:22:29 +00:00
22ff8accae
Use fixed-size types.
1998-07-21 00:20:35 +00:00
5b56c35223
Nuke the "pia" typedef.
1998-07-21 00:18:35 +00:00
44d02a07d0
Update for <dev/isa/cs89x0reg.h>
1998-07-21 00:11:03 +00:00
57488ef1e4
Remove the register descriptions from this file, and split them into
...
<dev/isa/cs89x0reg.h>
1998-07-21 00:10:11 +00:00
c3e7a09c4e
Use <dev/isa/cs89x0reg.h>
1998-07-21 00:08:57 +00:00
a083bc2950
Split the CS8900 register description from the SHARK-specific header file,
...
and place it here.
1998-07-21 00:07:33 +00:00
9e17315847
Write the CLOCK TEST bit *at least 16 consecutive times* during initialization,
...
as the clock source will be set incorrectly otherwise! From SMC Application
Note 7-15. Thanks to Christoph Badura for the pointer!
1998-07-20 21:39:05 +00:00
9df67db949
We're not Linux. If we still want driver version strings to be displayed
...
at boot, then I suppose DEBUG is a reasonable compromise.
1998-07-20 21:18:38 +00:00
d8e4026492
Oops, unused variable warning.
1998-07-20 21:17:30 +00:00
74fc0579eb
We're not Linux. If we still want driver version strings to be displayed
...
at boot, then I suppose DEBUG is a reasonable compromise.
1998-07-20 21:16:52 +00:00
79f77cc9ce
The mystery bit in the TEST register is actually the CLOCK TEST bit.
1998-07-20 20:45:06 +00:00
e99bc6379d
Don't deref a NULL tty pointer in the interrupt routine. This can happen
...
if we're the serial console, we have not yet been open'd, and we get an
interrupt for one reason or another.
1998-07-20 17:35:17 +00:00
2db169eb1f
Avoid possibly overflowing an mbuf. From Dan S. Decasper, via Chuck Cranor.
1998-07-20 16:41:05 +00:00
e641acf153
In configure(), initialize the HIL driver's software state before enabling
...
interrupts; if there's an interrupt pending (i.e. because the user pressed
a key or moved his mice while the kernel was being loaded), the interrupt
handler may safely be run. Fixes PR port-hp300/5397.
1998-07-20 10:47:50 +00:00
f5f944adfd
Regen
1998-07-20 07:34:11 +00:00
87dc83ee69
Remove duplicate DEC card
1998-07-20 07:33:54 +00:00
7a03c42491
Fix typo.
1998-07-20 02:17:17 +00:00
84676442e2
Commented out some bus_dma code, until I can fix.
...
(bus_dma.c needs sync with alpha port!)
Continued progress on scsi driver.
A couple of other compiler warning level of tweaks.
1998-07-19 21:41:16 +00:00
b4b261bbb0
Remove redundant opt_ddb.h
1998-07-19 20:45:26 +00:00
fb28f87855
Remove a check which restricted raw SCSI commands to the "minor 3"
...
("CTLMODE") subdevice. There are legitimate uses for raw commands with
normal tape handles too.
[I'm not sure if this is a final solution. Administrators might want
to set up a more finegrained policy. However, this should not be mixed
with the "set defaults" semantics of the "CTLMODE" subdevice; another
flag should be used instead (eg execute permission or a minor number bit).]
1998-07-19 18:43:20 +00:00
d408ddc6c7
Make the combination "profiled kernel" and "${KERN_AS} == "library""
...
work too. (mcount.po was forgotten)
1998-07-19 18:35:16 +00:00
66370d4fe9
Regen
1998-07-19 17:30:02 +00:00
e3bc291504
Add a devlist2h.awk so that we don't sprinkle the same constants over
...
each device driver file and use it.
1998-07-19 17:28:15 +00:00
334afaa14e
Regen from pcidevs.
1998-07-19 12:25:46 +00:00
463e7e6dce
Fix product ID for Matrox Mystique, add NEC PowerVR PCX2.
1998-07-19 12:23:56 +00:00
53e3ba1192
Make DDB work again.
1998-07-18 23:02:33 +00:00
6054d626f9
Switching dev/ic/lpt.c to use spllpt() instead of spltty(). It doesn't use
...
tty structures, and on some machines (namely the DraCo internal lpt, and some
multi-i/o boards for Amigas and DraCos), tying spltty to the pretty high printer
interupt level would hurt serial performance.
On all affected ports but Amiga, spllpt() has been defined in machine/intr.h
to be spltty(), thus preserving old behaviour. Portmasters are encouraged to
change is, if they feel something else is better (e.g., one of its own were
possible).
1998-07-18 21:27:25 +00:00
a455ce7531
Locking is now in the outer framework for isp_init/isp_reset- this allows
...
us to call isp_reset/isp_init internally with impunity.
Rename isp_phoenix to isp_restart and make it global. Clean it up a tad.
If we get an ASYNC_SYSTEM_ERROR code in isp_intr, call isp_restart and
return- the f/w is toasted at this point (usually), so we have to bring
things back to a known state.
In isp_mboxcmd, when we don't see the HOST_INT bit go clear, try and
find out if the isp is trying to tell us something and try again. This
may avoid a potential deadlock where the previous mailbox command hasn't
been cleared by the ISP.
In isp_init don't try and get device parameters if we already have them-
this typically doesn't work if we're in the middle of an isp_restart.
1998-07-18 21:10:16 +00:00
9afa921bc1
roll core version number and add a global visible isp_restart function
1998-07-18 21:06:20 +00:00
35c8fecf3a
fix headers
1998-07-18 21:05:39 +00:00
b85bf24ed5
fix bogus comments
1998-07-18 21:05:04 +00:00
576988940f
roll revision
1998-07-18 21:04:46 +00:00
1aa702b8f8
fix bogus initialization
1998-07-18 21:04:22 +00:00
99ff11f6b7
locking now out of main framework for isp_reset/isp_init
1998-07-18 21:02:06 +00:00
50d1442817
Fix PMAP_NEW and make it the default.
1998-07-18 20:35:14 +00:00
52ac5e203e
Precompute lots of bitmasks etc. in serparam(). Results in slightly better
...
(but I suspect, insignificant) performance, and also prepares for 8bit +
parity support.
1998-07-18 20:19:33 +00:00
2948f65db4
Use unsigned comparison of tbreg in delay().
1998-07-18 16:23:44 +00:00
786b86d71b
use AF_LOCAL instead of AF_UNIX
1998-07-18 05:04:35 +00:00
3a9ed00799
Document that we are more conservative after doing MTU discovery than the
...
suggestion in draft-floyd-incr-init-win-03. Rather than scaling cwnd back
by the ratio of new segment size to old segment size, we perform a slow start
using the Initial Window, computed with the new segment size.
1998-07-17 23:09:58 +00:00
116c3be1e5
In dvma_mapout(), make sure to not overrun the buffer when flushing the cache.
1998-07-17 23:05:35 +00:00
0f909866c0
Clarify that we're using the Loss Window when we receive a source quench.
1998-07-17 23:02:38 +00:00
fa20f24cd9
Add a comment wrt. a current issue w/ CWM.
1998-07-17 23:00:02 +00:00
a3f4316cba
Clarify that we are using the Loss Window if a retransmission occurred
...
during the three-way handshake.
1998-07-17 22:58:56 +00:00
830879a809
Comment where the Restart Window is computed, and in the non-CWM case,
...
make sure it never _increases_ cwnd.
1998-07-17 22:52:01 +00:00
1c4ff0a086
Comment where we use the Loss Window.
1998-07-17 22:18:49 +00:00
2fc1260cc0
Implement bus_dmamap_load_uio().
1998-07-17 21:09:59 +00:00
tsubai