f6a6201ac7
Bugfix; now VS3100/m76 also works.
1998-06-09 14:02:01 +00:00
bb63045726
Add recent ddb_init() interface change.
1998-06-09 12:01:28 +00:00
3e21bf604d
Remove unused variables.
1998-06-09 11:30:09 +00:00
69717a7f0e
Fix a UVM #if so {} balance is preserved and ctags(1) doesn't lose.
1998-06-09 09:31:58 +00:00
ddff5f8e94
Initial import of NetBSD/next68k.
1998-06-09 07:53:05 +00:00
949c52c154
add address conversion macro for MPC105 and some fix.
1998-06-09 05:53:30 +00:00
040581ceed
Add UVM support.
1998-06-09 05:41:19 +00:00
a5550009e6
correct counting for uvmexp.wired:
...
only pages explicitly wired by a user process should be counted.
1998-06-09 05:18:52 +00:00
e922c9cfec
Use PowerPC-generic stuff and eliminate the powermac portion.
1998-06-09 04:27:53 +00:00
5444e91249
The Performa 58x comm slot SONIC cards behave the same way as in
...
the LC/Performa 57x. From Yasuhiro Endoh.
1998-06-09 03:39:50 +00:00
00ede2160e
Change ddb_init() for a.out to provision for kernels which are not booted by
...
the current 'bootblock' method, like the Shark, which preloads and preformats
the symbol table right in the boot code.
1998-06-09 01:57:41 +00:00
5ba723ecf2
Cleanup: move {SWAP,DEV,VNODE}PAGER to std.arm32; required for Mach VM, and
...
happily ignored by UVM.
1998-06-09 01:15:48 +00:00
680a3d77f4
Add isa_dma{freeze,thaw}(), used to temporarily stop and then restart
...
all ISA DMA. Needed by e.g. the SmartCard reader for Sharks.
1998-06-09 01:04:17 +00:00
4c80d03830
Remove several cache invalidation instrcutions from routines like
...
sa110_context_switch() as they are not needed.
1998-06-09 01:02:14 +00:00
46565ac270
Add disksubr_acorn.c as well. These could likely be changed to use kernel
...
options, but this gets the kernel at least to compile, link, and work.
1998-06-09 00:39:47 +00:00
b4511c9330
Add disksubr_mbr.c dependent on `disk'.
1998-06-09 00:31:23 +00:00
e333272393
Change the ISA DMA API to take an isa_chipset_tag_t rather than
...
a struct device * corresponding to the ISA bus device. The ISA DMA
controller driver functions have been renamed and now take a struct
isa_dma_state *, and are called indirectly by machine-dependent code
which provides the DMA state.
These changes allow e.g. `ofisa' (the OpenFirmware configuration
mechanism for the ISA bus, used by e.g. Sharks) to use the MI ISA
DMA controller code.
1998-06-09 00:12:18 +00:00
98d02e5c94
Provide an isa_chipset_tag_t to the ISA bus device.
1998-06-09 00:12:00 +00:00
dde710c6f9
Adjust for changes to the ISA DMA API.
1998-06-09 00:11:34 +00:00
f194cb8705
Provide an isa_chipset_tag_t to children.
1998-06-09 00:10:27 +00:00
0b76aff07b
Change the ISA DMA API to take an isa_chipset_tag_t rather than
...
a struct device * corresponding to the ISA bus device. The ISA DMA
controller driver functions have been renamed and now take a struct
isa_dma_state *, and are called indirectly by machine-dependent code
which provides the DMA state.
These changes allow e.g. `ofisa' (the OpenFirmware configuration
mechanism for the ISA bus, used by e.g. Sharks) to use the MI ISA
DMA controller code.
1998-06-09 00:10:02 +00:00
eddb2f4269
Adjust for change to the ISA DMA API.
1998-06-09 00:09:43 +00:00
7c54de8712
Change the ISA DMA API to take an isa_chipset_tag_t rather than
...
a struct device * corresponding to the ISA bus device. The ISA DMA
controller driver functions have been renamed and now take a struct
isa_dma_state *, and are called indirectly by machine-dependent code
which provides the DMA state.
These changes allow e.g. `ofisa' (the OpenFirmware configuration
mechanism for the ISA bus, used by e.g. Sharks) to use the MI ISA
DMA controller code.
1998-06-09 00:08:43 +00:00
a3dbb61f55
Provide an isa_chipset_tag_t to the ISA bus device.
1998-06-09 00:08:12 +00:00
53394a1d41
Change the ISA DMA API to take an isa_chipset_tag_t rather than
...
a struct device * corresponding to the ISA bus device. The ISA DMA
controller driver functions have been renamed and now take a struct
isa_dma_state *, and are called indirectly by machine-dependent code
which provides the DMA state.
These changes allow e.g. `ofisa' (the OpenFirmware configuration
mechanism for the ISA bus, used by e.g. Sharks) to use the MI ISA
DMA controller code.
1998-06-09 00:06:54 +00:00
8dedb90f13
The ISA chipset must persist; it's required after autoconfig time.
1998-06-08 23:49:05 +00:00
25d2a890b1
Adjust intrnames.
1998-06-08 21:27:10 +00:00
5260d3fc8e
Add UVM support
1998-06-08 20:47:45 +00:00
28a7286ede
Uh, something went wrong last time?
1998-06-08 20:38:35 +00:00
e4e1bc1af9
Not used.
1998-06-08 20:36:36 +00:00
c0e7a80f53
Introduce newsmips_intr_t for intrcnt[].
1998-06-08 20:35:14 +00:00
ba4cb4e29d
Kill the printf: enabling zs interrupts
1998-06-08 20:34:43 +00:00
8f428e3872
Kill non-NetBSD RCS tags.
1998-06-08 20:23:07 +00:00
0f5f9c0221
Added support for DOS MBRs in addition to filecore boot blocks from
...
Chris Demetriou. Filecore and MBR handling has been split out into
separate files. Still needs some work before this could become MI.
Also fix the way in which arm32 filecore checksums are calculated so
that sectors filled with the same byte will not pass the checksum.
1998-06-08 20:21:17 +00:00
be58914fa7
Sync with RAMDISK:
...
No need for any COMPAT_* options in the ramdisk kernel
Can do without the uk driver also...
1998-06-08 20:20:05 +00:00
629b52dbcc
Sync with 1.3.2 release branch:
...
No need for any COMPAT_* options in the ramdisk kernel
Can do without the uk driver also...
1998-06-08 20:17:40 +00:00
8260bcaff5
Wall fixes.
1998-06-08 18:42:40 +00:00
f19cf41458
Add rcsID.
1998-06-08 18:18:58 +00:00
ae1b70e048
ISA shark-dependent code. Missed this file on last commit.
1998-06-08 18:18:11 +00:00
ee69a0b0a0
Add ISA support needed for Shark and the CATS board (CATS isa_machdep not
...
here yet).
1998-06-08 17:49:42 +00:00
3c3c83f7ad
Bugfix: use of uninitialised variable that gcc didn't notice.
1998-06-08 15:04:26 +00:00
8fb1228bc8
everything has bugs; either document them or don't bother with a BUGS section
1998-06-08 13:02:19 +00:00
ed25dc5c57
if there's no known bugs, don't have a BUGS section
1998-06-08 11:35:10 +00:00
cd2f6e9504
remove unnecessary paragraph separator
1998-06-08 11:34:41 +00:00
d719a4221f
if there's no known bugs, don't have a BUGS section
1998-06-08 11:34:04 +00:00
ec7941bba2
Nuke __BROKEN_INDIRECT_CONFIG.
1998-06-08 06:45:55 +00:00
f5cd6a7736
Add debugging support to the bus_space macros. If BUS_SPACE_DEBUG (or DEBUG)
...
is defined, the bus_space macros will check to ensure that the bus address
and the target buffer (if applicable) are aligned properly for the size
of the type being used. If they are not, a message will be displayed on
the console.
Strict alignment is required by the Alpha architecture, and a trap will
occur of unaligned access is performed. These changes will aid debugging
of broken device drivers.
1998-06-08 03:42:19 +00:00
3f6155e843
Update from Iain for the parallel port stuff.
1998-06-07 21:14:17 +00:00
74b990a7b4
Identify 3100/m38 + /m48
1998-06-07 20:20:05 +00:00
d360348f52
DDB support on glass tty. Also smarter keyboard decoding.
1998-06-07 20:19:12 +00:00
aedc717c00
Hopefully avoid breaking PCMCIA on alpha.
1998-06-07 19:11:29 +00:00
2f1d0864fe
UVM default on vax for now.
1998-06-07 18:39:15 +00:00
94de2146a9
Add ISA Plug and Play attachment for PCIC PCMCIA controller (pcic* at isapnp?).
...
Slightly modify ISA attachment to let the two share code.
1998-06-07 18:34:38 +00:00
60530637e4
Enable use of secondary cache, if present.
1998-06-07 18:34:09 +00:00
1a900c4abc
Init some variables to not get trash on the screen.
1998-06-07 18:32:04 +00:00
c9f9111be4
Add support for powerdown.
1998-06-07 06:31:17 +00:00
528bbb95ed
Add debugging support to the bus_space macros. If BUS_SPACE_DEBUG (or DEBUG)
...
is defined, the bus_space macros will check to ensure that the bus address
and the target buffer (if applicable) are aligned properly for the size
of the type being used. If they are not, a message will be displayed on
the console.
While strict alignment is not strictly necessary on the x86, ensuring
proper alignment can aid performance, and help make drivers more portable
to architectures (like the Alpha and StrongARM) which _do_ require strict
alignment.
1998-06-07 03:32:32 +00:00
c0c7384dde
Also, remove space at the end of line.
1998-06-07 03:01:05 +00:00
207a6dcab6
Use TAB instead of two space to indent.
1998-06-07 02:36:53 +00:00
e33ef0027d
Remove TAB after `options I686_CPU'.
1998-06-07 02:34:41 +00:00
2e9939699d
Kernel configuration for my Multia, an example of how to configure a
...
Multia w/ PCMCIA support.
1998-06-07 00:45:35 +00:00
14df007174
Oops, don't forget to fill in *addrp.
1998-06-07 00:29:29 +00:00
0890af5ca8
Only disable an interrupt line after MAXSTRAYs if there is no handler
...
attached; we get stray interrupts on PCI devices sometimes, for some
unknown reason. (Similar problem exists on the 164SX, which also has
a Pyxis.)
1998-06-06 23:29:23 +00:00
331a7f56c1
Remove some debugging code no longer relevant now that we have DMA
...
window chaining.
1998-06-06 23:11:52 +00:00
eabad6b572
Implement bus_space_{alloc,free}() for swiz PCI I/O space.
1998-06-06 22:44:46 +00:00
7a6d646c9b
Implement bus_space_{alloc,free}() for BWX bus space.
1998-06-06 22:28:16 +00:00
30f9be231f
Restructure cpu_reboot() a bit, and add support for powering down
...
on the Sun4m if RB_POWERDOWN is specified.
1998-06-06 21:46:51 +00:00
1c6a275e9c
Only attempt the powerdown if the power register was mapped.
1998-06-06 21:40:20 +00:00
402c48737f
needs-flag'ize the power device.
1998-06-06 21:30:34 +00:00
9553573381
If we have APM, only power down if RB_POWERDOWN was specified (fall into
...
RB_HALT case if it fails).
1998-06-06 21:27:31 +00:00
fe17c44d6c
Add support for software powerdown of the Digital Personal Workstation.
1998-06-06 20:53:41 +00:00
04ba8480ae
Use REGVAL64() to frob the Pyxis interrupt mask register.
1998-06-06 20:42:36 +00:00
098dd211c7
Define a REGVAL64() for some Pyxis registers.
1998-06-06 20:40:14 +00:00
49aea111fb
If the platform specified a powerdown hook, and howto has RB_POWERDOWN,
...
call the hook. If the hook fails, print a warning, and just halt (RB_HALT
is implied by RB_POWERDOWN).
1998-06-06 20:39:04 +00:00
1733ad8dc5
Clean up a little, and add a `powerdown' hook in the platform structure.
1998-06-06 20:18:50 +00:00
d08070a693
Add a comment describing the locking needs of the alpha_sgmap.
1998-06-06 20:12:28 +00:00
db50fa53b8
Add Aria driver.
1998-06-06 10:14:21 +00:00
e666cd4b3b
install floppy kernel
1998-06-06 05:36:53 +00:00
ff6c535817
sync with other md_root.c files.
1998-06-06 05:12:54 +00:00
4bc09321a9
add md to the "sparc_nam2nlk" and "chr2blk" arrays. the former fixes
...
panics seen on a floppy boot in setroot() as it could not properly
determine the root device.
1998-06-06 05:03:23 +00:00
85d08836f1
- Don't call *_dma_init() twice; there's no need to. Just do it in *attach().
...
- Display Pyxis revision properly.
1998-06-06 01:33:44 +00:00
c0fa3c6ac4
Don't call *_dma_init() twice; there's no need to. Just do it in *attach().
1998-06-06 01:33:23 +00:00
59d76407b4
Display information about which sgmap we're attempting to initialize
...
if we die in alpha_sgmap_init().
1998-06-06 01:31:46 +00:00
08079a8f21
Don't compile in any rasterconsole code.
1998-06-05 22:17:02 +00:00
88d55c928c
Add virtual console support.
1998-06-05 22:02:56 +00:00
9331237596
Oops, turn off some debugging printfs.
1998-06-05 21:47:14 +00:00
bf8523f4e4
- Egads! There are Pyxis "Pass 1" chips that do not have the DMA bug!
...
Use the check recommended by the Digital Workstation engineers; look
for Miata 1 systems (i.e. with Intel SIO). From Andrew Gallatin.
- Update copyright (Pyxis and BWX).
1998-06-05 19:25:19 +00:00
f251e3372d
Don't attempt to map the PCI IDE interrupt at bus 0 device 11 on the
...
AlphaPC 164 and AlphaPC 164LX - these are wired to compatibility mode.
1998-06-05 19:15:41 +00:00
1aa688234e
Miata 1 has an Intel SIO at bus 0 device 7 and a CMD PCI IDE at bus 0
...
device 4. Miata 1.5 and Miata 2 have a Cypress at device 7 and PCI IDE
at functions 1 and 2 of the Cypress (like the PC164SX). These on-board
PCI IDE controllers are wired to compatibility mode, so don't bother
trying to map the interrupt.
1998-06-05 19:04:51 +00:00
a1c151d56b
Add system variation for Miata 1.5.
1998-06-05 18:18:37 +00:00
c072110af0
Actually, I did use a few of them on this file (I wasn't clear enough
...
in my mail to Ross, I guess...)
1998-06-05 17:42:53 +00:00
bb362059ac
On Pass 1 Pyxis, disable PCI Read Prefetching, and warn the user about
...
the DMA bug that exists on this Pyxis revision.
1998-06-05 17:24:11 +00:00
29977868a7
What was called CNFG in ALCOR and ALCOR2 is actually called PYXIS_CTRL1
...
in Pyxis. Add a comment to this fact.
1998-06-05 17:22:34 +00:00
73e5032ac9
Define the Pyxis-specific bits in the CIA_CSR_REV register (ID mask, and
...
the ID for the 21174).
1998-06-05 17:16:31 +00:00
2701ea3ef3
Add DEC_550 (Miata).
1998-06-05 17:03:07 +00:00
5790ee09ee
Revert...Jason didn't use Andrew's diffs.
1998-06-05 15:28:40 +00:00
428a0d387a
remove old (now broken) memory disks hooks code.
1998-06-05 15:00:10 +00:00
135e6dc7e0
make this work with new md root stuff.
1998-06-05 14:57:55 +00:00
26eb9abb32
Add support for NWB-231A 4-port RS-232C card.
1998-06-05 14:19:22 +00:00
780f7fcf6f
Remove excessive cache flush.
1998-06-05 12:34:06 +00:00
8f262b2d67
Add (missing) "filedesc"
1998-06-05 12:24:44 +00:00
6bf20f4c29
Add support for UVM and MACHINE_NEW_NONCONTIG.
1998-06-05 12:22:43 +00:00
9125a5f198
Merge in MACHINE_NEW_NONCONTIG support and some fix from Tsubai-San.
...
UVM support.
1998-06-05 11:27:09 +00:00
8f455480ef
Tweak the copyrights a little bit. pci_550.h gets a TNF copyright, not
...
CMU, and pci_550.c keeps TNF but gets "Andrew Gallatin and Jason R. Thorpe".
1998-06-05 03:34:27 +00:00
cf914cac00
oops, read CNFG on all Pyxis revs.
1998-06-05 02:15:38 +00:00
cbaedc8675
Support for the Digital Personal Workstation [456]xx, a.k.a. Miata (systype
...
DEC_550). Mostly cloned from the EB164 systype, with some modifications
from myself, and a few more from Andrew Gellatin.
1998-06-05 02:13:41 +00:00
3cfb38c5d1
Define the Pyxis interrupt request register.
1998-06-05 00:53:02 +00:00
3249813e11
For whatever reason, the firmware seems to enable PCI loopback mode if it
...
also enables BWX. Make sure it's enabled if we have an old, buggy firmware
rev.
1998-06-04 22:58:33 +00:00
d4d49905dd
Add support for using BWX for PCI config space and PCI i/o and mem space
...
on the ALCOR2 and Pyxis. BWX is enabled iff:
- It hasn't been disabled by the user (patch `cia_use_bwx' or build cia.o
with the option "CIA_USE_BWX=0"),
- it's enabled in CIA_CSR_CNFG,
- we are running on an EV5-family processor,
- BWX is in the processor's capabilities mask.
1998-06-04 21:34:45 +00:00
57ce421691
Clean upp system detect code. Enable primary cache on VS3100.
1998-06-04 19:42:14 +00:00
616125f8d1
Deal with a hardware bug in Pass 1 and Pass 2 Pyxis chips. Basically,
...
the scatter/gather TLB cannot be invalidated on these chips. So, to
work around this, we configure the otherwise unsed DMA Window 2 as a
2M SGMAP window at 128M, point all of its page table entries at the
DMA spill page, and, when the TLB is to be invalidated, put the PCI bus
into loopback mode, and create a target hit on Window 2 every 64k for
the number of TLB entries (plus a few ... it seems to not work unless
we read a few extra times), forcing out old TLB entries to make room for
the new, dummy target hits.
1998-06-04 18:11:23 +00:00
c6d1832868
Include all the correct header files to get the prototypes of all the
...
soft net interrupt functions.
Handle NETISR_NATM soft interrupts.
1998-06-04 17:45:50 +00:00
61298c0cbf
Type postmortem_active as an int. (Pointed out by Patrick Welche).
1998-06-04 17:44:18 +00:00
78ebccfc2d
Rudimentary support for the VS3100 builtin graphics console.
1998-06-04 15:51:12 +00:00
a51d42503c
Export the spill page PTE, and provide a hook to initialize it early.
1998-06-04 01:22:52 +00:00
6dc28f5445
CIA and Pyxis have 8 scatter/gather TLB entries.
1998-06-04 01:18:22 +00:00
32fef69ef7
Define the CIA control register.
1998-06-04 01:04:11 +00:00
d94f02f9fd
Ok, now we _REALLY_ have Pyxis recognition correct. There are two systypes
...
that can have Pyxis: EB164 (AlphaPC164LX and AlphaPC164SX) and DEC_550 (Miata),
and these systypes/variations _always_ have Pyxis.
1998-06-03 23:16:55 +00:00
44605ba506
Define a bunch more system variations.
1998-06-03 23:07:38 +00:00
062294cc8c
Magma parallel port ioctls per Iain Hibbert.
1998-06-03 22:40:00 +00:00
87fe4d9ea1
Update from Iain on the parallel port stuff.
1998-06-03 22:38:31 +00:00
15c52040a5
Define the ALT_MEM big in the CIA revision register.
1998-06-03 22:19:08 +00:00
f8acb6d6fa
Sync w/ i386 port:
...
Eliminate some needless indirection through ISA DMA front-end functions.
1998-06-03 21:55:26 +00:00
52450409d6
Sync w/ i386 port:
...
Implement bounce buffers for mbufs.
Also, correct copyright snafus, and a forgot-o left over from a commit
I made yesterday.
1998-06-03 21:52:36 +00:00
6d29690288
Implement bounce buffers for mbufs.
1998-06-03 21:50:48 +00:00
23a5420f99
turn on Essential HIPPI for this configuration
1998-06-03 21:17:52 +00:00
9f5797ac1d
turn on Essential HIPPI for these configurations
1998-06-03 21:16:28 +00:00
d6041754c2
Allow the DMA tag to specify a boundary contraint. If the device has a
...
more strict boundary, the map will use it, otherwise the map will inherit
the tag's, unless the tag's constraint is 0 (no boundary constraint).
1998-06-03 18:25:53 +00:00
554cce1e94
Remove double "options GATEWAY" entry.
1998-06-03 10:03:25 +00:00
28486ff301
Remove the _cookie member of the DMA tag; it's not used by anything. (This
...
was already done to the i386 port.)
1998-06-03 06:47:41 +00:00
7b37a276e2
Sync w/ i386 port:
...
Optimize the ISA DMA map load somewhat; don't traverse the buffer twice.
Instead, just attempt to do a normal load first. If we exceed the bounce
threshold or the number of segments, then we bounce the transfer.
1998-06-03 06:43:04 +00:00
6ffa35b390
Sync w/ i386 port:
...
When loading a DMA map, if the page's physical address exceeds the bounce
threshold, return an error to the caller (the caller will attempt to
bounce the transfer).
1998-06-03 06:41:51 +00:00
b5c2ecc231
Sync w/ i386 port:
...
Add a `bounce threshold' to the i386 DMA tag.
1998-06-03 06:40:45 +00:00
051c391187
Optimize the ISA DMA map load somewhat; don't traverse the buffer twice.
...
Instead, just attempt to do a normal load first. If we exceed the bounce
threshold or the number of segments, then we bounce the transfer.
1998-06-03 06:37:54 +00:00
66f9322f5f
EISA and PCI do not require bouncing; specify a bounce threshold of 0.
1998-06-03 06:35:49 +00:00
7b2ef456f0
When loading a DMA map, if the page's physical address exceeds the bounce
...
threshold, return an error to the caller (the caller will attempt to
bounce the transfer).
1998-06-03 06:35:04 +00:00
f018f866d7
Add a `bounce threshold' to the i386 DMA tag.
1998-06-03 06:33:02 +00:00
0b25bb43b3
Adjust bus_dmamap_sync() for the R4000; in that case, use the stashed
...
virtual address for the segment, rather than the physical address, and
adjust the cache call appropriately.
1998-06-03 05:10:23 +00:00
63be85fc62
Fill in the virtual address of each DMA segment as we load the map.
1998-06-03 04:41:30 +00:00
691e8af708
Add a "virtual address" private member to the pmax bus_dma_segment_t, for
...
use in R4000 cache flush operations in bus_dmamap_sync().
1998-06-03 04:38:41 +00:00
8ed096c794
Panic if we can't fulfill a bus_dmamap_load() with a boundary constraint.
1998-06-03 04:35:42 +00:00
47724b2eb9
Sync w/ i386 port.
1998-06-03 04:33:28 +00:00
2e846b8c1e
Sync w/ i386 port.
1998-06-03 04:20:22 +00:00
50be447da3
Sync the bus_dmamap_load back-end functions between alpha and i386. (only
...
slight, unnecessary differences)
1998-06-03 04:15:05 +00:00
2c1cbdae75
Moved delay() from machdep.c to iomd_clock.c as delay will be dependant
...
on the system timers being used.
1998-06-02 21:57:58 +00:00
bdfeab3714
Merge in UVM support from Neil Carson <neil@causality.com>.
1998-06-02 20:41:46 +00:00
0618ed7122
Define the maximum size of the kernel VM data area.
1998-06-02 20:33:01 +00:00
ea702a5130
Switch to MACHINE_NEW_NONCONTIG as the default.
1998-06-02 20:32:18 +00:00
4ee7a131ad
Don't allow the copyin and copyout routines to use bcopy() as this will
...
not work as the stack cannot be unwound if the copy aborts due to a fault.
1998-06-02 19:14:44 +00:00
9a4b24a02a
Simplify the stack filling code when using the STACKCHECKS option.
1998-06-02 14:34:55 +00:00
52da0e26c6
Kill unused variable that resulted from the last change.
1998-06-02 03:21:42 +00:00
910666949f
An inability to map a slot's address space may be a normal condition --
...
for instance, on-board video may live here. Make the complaint about
this a DEBUG rather than a DIAGNOSTIC message.
1998-06-02 02:24:03 +00:00
da2f2cb79f
Store the PA of the framebuffer in the softc. This eliminates the need
...
for the sc_phys callback; we can just store the PA in the grfbus attach
args, rather than a function pointer, which simplifies the code nicely.
1998-06-02 02:14:20 +00:00
7022024d4a
Add epic* at pci?
1998-06-02 01:43:33 +00:00
b8ce6ef764
Make the direct ADB driver default.
1998-06-02 00:29:29 +00:00
09a9c016e3
Added Manuel Bouyer's recent i386 _bus_dmamap_load_buffer() patch :-
...
Add handling of DMA boundary barrier in _bus_dmamap_load_buffer(). This
affects all bus_dmamap_load* functions of bus_dma(9).
While I'm there fix a bug where the dm_segs array could be overflowded by one.
1998-06-01 22:47:27 +00:00
c13f81fd52
Correct some comments.
1998-06-01 19:33:59 +00:00
b64a62fc73
Change "extern var;" --> "extern int var;" and so on. (for egcs -Wall)
1998-06-01 19:31:04 +00:00
e6be56ae0b
Need <stdlib.h> for mktemp() prototype.
1998-06-01 14:05:35 +00:00
9ef6fa7387
Build pmap_boostrap.o without profiling; we can't call mcount before the
...
mmu is enabled!
1998-05-31 23:28:07 +00:00
a7f360c6c9
Specify a non-profiling C rule.
1998-05-31 23:25:41 +00:00
c1ca72eaf8
Build pmap_boostrap.o without profiling; we can't call mcount before the
...
mmu is enabled!
1998-05-31 23:18:57 +00:00
92d8ae0ee3
Specify a non-profiling C rule.
1998-05-31 23:18:05 +00:00
4519b25f6c
Add options COMPAT_386BSD_MBRPART.
1998-05-31 13:53:42 +00:00
019443d82c
Profiling version of the BASALT kernel.
1998-05-30 17:56:08 +00:00
a8b4eda678
Remove unnecessary cache flush.
1998-05-30 06:16:06 +00:00
560c0e7643
Make configurable without adb.
1998-05-30 06:13:03 +00:00
94d805aff1
Add handling of DMA boundary barrier in _bus_dmamap_load_buffer(). This
...
affects all bus_dmamap_load* functions of bus_dma(9).
While I'm there fix a bug where the dm_segs array could be overflowded by one.
1998-05-29 16:48:09 +00:00
5d6bc16daa
more optimizations
1998-05-29 15:55:34 +00:00
164da176e8
Add boundary checks to _bus_dma_load...
1998-05-29 15:25:07 +00:00
c1da5f908f
Use arch/powerpc/.
1998-05-29 10:32:49 +00:00
970fffe99b
revert. ofppc->powerpc
1998-05-29 10:04:22 +00:00
7e5b88f619
Revert OpenFirmware files to powerpc directory.
...
OpenFirmware files are used by ofppc/macppc.
1998-05-29 08:38:25 +00:00
0c05b92da1
pull in new PC display headers
1998-05-28 16:59:31 +00:00
dd457b5369
pull in new PC display headers
...
support "pcdisplay" console device
1998-05-28 16:56:26 +00:00
6a9cf99c36
Moved to usr/share/man/man8/man8.atari.
1998-05-28 12:51:03 +00:00
57508e322c
Add bootpref subdir.
1998-05-28 12:41:54 +00:00
ce735c3455
bootpref(8), set/get bootpreferences by Julian Coleman
1998-05-28 12:39:23 +00:00
f87c18d94e
Fix some errors occuring when compiling with DEBUG. These errors were hinted
...
at by recent hp300/mac68k changes.
1998-05-28 12:16:08 +00:00
45439ad32b
Use new PowerPC-generic stuff(sys/arch/powerpc).
1998-05-28 08:44:56 +00:00
c6a40446f5
Keep compile directory.
1998-05-28 08:24:00 +00:00
9c11ca3d51
Rename NetBSD/powerpc to NetBSD/ofppc.
...
New sys/arch/powerpc with PowerPC-generic stuff.
1998-05-28 07:56:42 +00:00
f2e26f6125
Handle a non-EMP Trackman the same way we handle a non-EMP Mouseman.
...
Patch from John Wittkoski.
1998-05-28 02:11:32 +00:00
5c082547cd
Add fat since it now works.
1998-05-28 00:57:55 +00:00
dc8a7077ed
Handle the i386/PMAP_NEW copyout() differently:
...
Don't try to avoid faults when the PTEs are checked. Set pcb_onfault
instead so that trapwrite() is called as if the PTE were RO.
This is faster than explicitely ckecking the PDEs - at least in the
majority of calls where the PT is already present.
Thanks to Stefan Grefen for input and testing.
1998-05-27 15:53:30 +00:00
70262fb287
Properly split boot spec into file name and arguments.
1998-05-27 10:29:10 +00:00
47391e90cb
Sync with mac68k: correct some errors if building a kernel with DEBUG.
1998-05-27 05:58:40 +00:00
f976f2297f
In pmap_check_wiring(), be careful to use uvm_map_lookup_entry() if we're
...
using UVM. Notice by Hauke Fath, no PR generated.
1998-05-27 05:47:22 +00:00
92c02d3af3
If DEBUG, make sure to pull in the prototype for cngetc(). Noticed
...
by Hauke Fath, no PR generated.
1998-05-27 04:11:51 +00:00
d5726c1096
PG_PTPAGE is only useful if !UVM. Noted by Hauke Fath in
...
PR 5462.
1998-05-27 03:58:16 +00:00
e208d8972b
Ouch, key debugging printfs off BUS_DMA_DEBUG, not DEBUG ... noisy!
1998-05-27 03:57:49 +00:00
3dc4f22908
A few fixes to make it really work.
1998-05-27 01:16:47 +00:00
c59c1eae2a
Define ioasic device offsets in terms of standard ioasic "slot" offsets.
1998-05-27 00:18:13 +00:00
1ef3ca572e
- Additional rearrangement for the sake of running on the DECstation some
...
day.
- Convert to use bus_dma.
- Fix cleaning up unaligned start address.
- Correctly determine if the device supports Fast SCSI, and adjust the
minimum sync period accordingly.
- Compute minimum sync period correctly on the 25MHz devices.
- Use GPI2 to determine if we're a 25MHz or 40MHz device.
- Currectly determine SCSI ID and "fast mode enabled" for the built-in
TCDS on DEC 3000 models, using cached information from the PROM environment.
1998-05-26 23:43:05 +00:00
ab087002d1
Make this into a proper attachment (i.e. use asc_tcds) and clean up
...
the namespace accordingly.
1998-05-26 23:37:44 +00:00
3aa84f9e26
- Make this into a proper attachment (i.e. use asc_tcds) and clean up
...
the namespace accordingly.
- Set FCLK in the CFG3 register if we have a > 25MHz clock.
- Indicate that we support Fast mode to the back-end if we're told we're
fast by the TCDS layer.
- Correctly compute the minimum sync period.
1998-05-26 23:37:27 +00:00
3ce836df8d
Make the TCDS attachment of the ASC driver a proper attachment (i.e.
...
attach it with asc_tcds).
1998-05-26 23:34:23 +00:00
2d384ae1a1
GPI2 in the CIR register indicates our clock speed: 1 = 25MHz, 0 = 40MHz.
1998-05-26 22:48:01 +00:00
4631dca956
Rewrite at least the R{2,3}000 case for bus_dmamap_sync(), in hopes of
...
making performance of bus_dma drivers not completely suck on the DECstation.
XXX R4000 case is still abysmal, because some other data structure
modification is required to deal with the virtually-indexed R4000 cache.
1998-05-26 18:21:10 +00:00
ed42c358fd
Revert. (wdc driver is still MD.)
1998-05-26 01:42:53 +00:00
ragge