03939069dc
remove unused share map code from UVM:
...
- update uvm_faultinfo's rvaddr to orig_rvaddr to match changes from
uvm_fault.h
1998-10-11 23:16:20 +00:00
2d4c15ebc9
remove unused share map code from UVM:
...
- replace map checks with submap checks
- get rid of unused 'mainonly' arg in uvm_unmap/uvm_unmap_remove, simplify
code. update all calls to reflect this.
- don't worry about unmapping or changing the protection of shared share
map mappings (is_main_map no longer used).
- remove unused uvm_map_sharemapcopy() function from fork code.
1998-10-11 23:14:47 +00:00
1b59a238c4
remove unused share map code from UVM:
...
- simplify uvm_faultinfo in uvm_fault.h (parent map tracking no longer needed)
- adjust locking and lookup functions in uvm_fault_i.h to reflect the above
- replace ufi.rvaddr with ufi.orig_rvaddr in uvm_fault.c since rvaddr is
no longer needed.
- no need to worry about share map translations in uvm_fault(). simplify.
1998-10-11 23:07:42 +00:00
8ffef382dd
remove unused share map code from UVM:
...
- udv_fault() no longer has to worry about share map address translations
on device faults. simplify code.
1998-10-11 23:02:31 +00:00
a4d3b16d22
remove unused share map code from UVM:
...
dump UVM_ET_MAP/UVM_ET_ISMAP. if you need to detect a submap use
UVM_ET_SUBMAP/UVM_ET_ISSUBMAP.
1998-10-11 22:59:53 +00:00
1449d78fd3
remove the following if UVM is defined:
...
- share_map in vm_map_object. UVM doesn't use share maps, so drop unused
partial support for them to simplify the code.
- is_main_map in vm_map. no longer needed once share maps are gone.
- vm_map_version_t. map versions are handled elsewhere in UVM.
1998-10-11 22:56:42 +00:00
2101c736a3
Make the product lookup table-driven.
1998-10-11 18:42:01 +00:00
44d4d6a60a
Call correct ad1848 attach routine. Fixes PR 6269.
1998-10-11 17:02:36 +00:00
b9d844a520
Allocate a private PCB, kernel stack and interrupt stack for each processor.
...
As a result, the stack setup code in locore.s changes slightly in
the MULTIPROCESSOR case. Also, make the stack redzone barrier (for
debugging only) a per-CPU entity.
1998-10-11 14:46:45 +00:00
e0fa7545bf
Use pcmcia_io_free() where appropriate.
1998-10-10 22:01:24 +00:00
09b6735d35
Define missing pcmcia_io_free().
1998-10-10 21:59:40 +00:00
be326c54fe
Add pcmcom driver and com slaves.
1998-10-10 21:58:22 +00:00
f1c971ea72
Device driver for PCMCIA multi-port serial cards. Currently supports
...
the Socket Communications, Inc. dual-rs232 device.
1998-10-10 21:27:21 +00:00
260d2c97a9
Make 'configure()' agree with the prototype in <sys/device.h>.
...
(Returns 'void').
1998-10-10 19:46:29 +00:00
bdf8d911fc
Clear 'cold' to zero at the end of configure(), where it belongs.
...
(This used to be done in machdep.c, but thorpej recently zapped
that one ;-)
1998-10-10 19:15:32 +00:00
ff455e77b6
Match pchb by class/subclass, like pcib.
...
Add a note about this strange Pequr host bridge in Compaq machines.
1998-10-10 14:12:21 +00:00
f568c6347c
Fix last commit -- NISADMA is either 0 or 1.
1998-10-10 13:43:10 +00:00
fe56f257b2
If the adapter returned XS_RESET and the xfer specifies a retry count,
...
attempt to reissue the command (which was destroyed by the bus reset).
Slightly modified from PR #6090 , from Matt Jacob.
1998-10-10 03:42:53 +00:00
16cf223098
Enforce open-for-writing on ioctls that change the bus's state.
...
Implement ioctl pass-through to the host bus adapter, allowing both
SCBUS* ioctls handled at that level and host adapter-specific ioctls
to be implemented. Implement SCBUSIORESET as a pass-through.
Inspired by PR #6090 , from Matt Jacob.
1998-10-10 03:33:01 +00:00
4898b61ee2
Define the SCBUSIORESET ioctl (no argument).
1998-10-10 03:18:51 +00:00
9eb1a83c84
Define the SCBUSIOSCAN ioctl (and its argument structure). This
...
SCSI bus ioctl rescans the SCSI bus for new devices.
Garbage-collect the SCIOCREPROBE and OSCIOCREPROBE. They are obsolete.
1998-10-10 02:37:28 +00:00
45bf57f8a6
Garbage-collect the SCIOCREPROBE and OSCIOCREPROBE ioctls. This is a
...
bus-oriented command. (How much sense does it make to open a device
to rescan the bus?!)
1998-10-10 02:35:30 +00:00
1e2b6a99ed
Implement the SCBUSIOSCAN ioctl. Rescans the bus for new devices.
1998-10-10 02:34:15 +00:00
1163f713bb
Make DBL_MIN and DBL_MAX makes limits.h (otherwise CPP complains when
...
building xlint).
1998-10-10 02:13:55 +00:00
908cdfe4e3
Add scsibus entry points to the cdevsw[].
1998-10-10 02:00:49 +00:00
e3fb94a7b4
Add the open/close/ioctl entry points for the SCSI bus, i.e. /dev/scsibusN.
1998-10-10 01:14:26 +00:00
0a588fad00
Add cdev_scsibus_init() (open, close, ioctl).
1998-10-10 01:11:36 +00:00
dda872c16a
Define an additional host adapter return code, XS_RESET, indicating
...
that the bus was reset while the command was pending. The middle
layer may choose to retry the command.
1998-10-10 00:36:13 +00:00
29d472f53d
Garbage-collect the open_target_lu and close_target_lu entry points from
...
struct scsipi_adapter; they were not used.
Add a scsipi_ioctl entry point to struct scsipi_adapter. This will be
used to issue ioctl commands to the host adapters.
Inspired by PR #6090 , from Matt Jacob.
1998-10-10 00:28:28 +00:00
5422d07da0
Construct a `flush_cache_all()' for Cypress CPUs.
1998-10-09 10:48:14 +00:00
024e5f4c9a
More `#if defined(MULTIPROCESSOR)'s.
1998-10-09 10:08:52 +00:00
57a688f81e
Init a variable.
1998-10-09 08:01:33 +00:00
832a061bca
Fix some old mistakes when I originally committed this.
1998-10-09 06:20:06 +00:00
c4ece7cdcb
Commit out include of "../include/macros.h" since its bcopy conflict with
...
the one in "lib/libsa/stand.h".
1998-10-09 06:15:33 +00:00
71364ebea6
Workaround problem with le driver forgetting its address
1998-10-09 06:14:22 +00:00
3d8c929799
Remove define for SUPPORT_BOOTPARAMS and put in the Makefile instead.
...
Fix DHCP code so it works.
1998-10-09 06:13:30 +00:00
7d79b82d33
include <bsd.prog.mk> and make changes so that "make obj" works.
...
Make it easy to build an boot which uses BOOTP/DHCP instead
RARP/BOOTPARAMS.
1998-10-09 06:12:31 +00:00
bbf29cff44
Add strncpy (needed for bootp/dhcp). Tighten up some of the assembly.
1998-10-09 06:09:48 +00:00
45a8df778f
Remove some unnecessary includes.
1998-10-09 00:17:20 +00:00
312385da0a
Define SMP versions of some cache flush methods.
1998-10-08 22:27:32 +00:00
41d031837e
Define a message structure of inter-processor communication.
1998-10-08 22:25:42 +00:00
f3c4a67a7f
Adapt to changes to the cpus[] array.
1998-10-08 22:23:44 +00:00
34ad8e5fb7
Find out about the number of CPUs in the system before starting device
...
configuration, so we can build a cpus[] array without "holes".
1998-10-08 22:14:44 +00:00
a61ee50b27
Move [gs]etcontext and [gs]etpte() to pte.h
1998-10-08 21:49:12 +00:00
e6bbfcc58a
Move [gs]etcontext() and [gs]etpte() to pte.h
1998-10-08 21:47:34 +00:00
6662b5ed74
- define framework for >8bit transfers
...
- implement 16 bit contiguous and 16 bit interleaved, both big-endian
1998-10-08 21:46:39 +00:00
0a70a74239
Regen.
1998-10-08 20:44:00 +00:00
8ba90a1c93
Correct product ID for Socket Communications Dual Serial Adapter.
1998-10-08 20:43:42 +00:00
b69841d26a
Add a NOSYNCCACHE quirk for the Micropolis 2217-15MQ1091501, as reported
...
by Matt Jacob, PR #6027 .
1998-10-08 20:24:10 +00:00
39f4d1c239
Handle devices that have the SDEV_NOSYNCCACHE quirk.
1998-10-08 20:21:13 +00:00
7be31bed79
Add a "NOSYNCCACHE" quirk, as suggested by Matt Jacob in PR #6027 .
1998-10-08 20:17:52 +00:00
19d188b293
Regen.
1998-10-08 20:12:52 +00:00
1b15f541a6
Add Megahertz X-JACK 56kbps Modem, from Johnny C. Lam, PR #6173 .
1998-10-08 20:11:59 +00:00
67b94a13ed
Add the Intel 82443BX PCI host bus adapter. From Soren S. Jorvang, PR #6250 .
1998-10-08 20:04:32 +00:00
5599443810
If ISA DMA is not present in the kernel (i.e. no ISA DMA-using devices
...
configured in), don't call ISA DMA functions to check for DRQs being
free. Just return EINVAL in this case. Fixes PR #6187 , from Herb Peyerl.
1998-10-08 19:59:20 +00:00
495b6aafdc
fix ppref botch. establish ppref at split time before we add the duplicate
...
reference.
1998-10-08 19:47:50 +00:00
6a2b035300
Add a NOLUNS quirk for the Sony CDL1100 changer, from Chris Jones, PR #6238 .
1998-10-08 18:46:15 +00:00
3e28defef4
No point in making the fake partition that large.
...
This smaller one will (hopefully) make 0-start
installations work on more machines.
1998-10-08 14:25:42 +00:00
b6fd7187e0
Fix more syscall32 and signal breakage.
1998-10-08 02:31:39 +00:00
0b4cfbfe6e
Fix some whitespace lossage.
1998-10-08 02:06:13 +00:00
8d41878215
Add pckbc device, keyboard and mouse and wskbd and wsmouse via pckbc.
1998-10-08 01:59:22 +00:00
d21eb4802d
Rename the pckbd attribute to avoid clashing with the pckbd device
...
from dev/pckbc/*
Include files.pckbc
1998-10-08 01:50:28 +00:00
14f5ac9081
Use the pool allocator for ipflow entries.
1998-10-08 01:41:45 +00:00
974aa74abd
Use the pool allocator for ipqent structures.
1998-10-08 01:19:25 +00:00
edeeb71bd8
Add the sigaction call.
1998-10-07 23:48:04 +00:00
00a3eb89be
This is used on the alpha. It is called osf_sigaction under linux because of the format of the sigaction structure but it acts the same.
1998-10-07 23:47:44 +00:00
588ccb2d75
Fix some typos in comments, and clean up some whitespace.
1998-10-07 23:33:02 +00:00
6cfb33b4e4
Use the pool allocator for the tcpcb's TCP/IP header template.
1998-10-07 23:20:03 +00:00
7d45dcb522
Kill the linux_old*.h includes (which are only used in the corresponding linux_old*.c). Add linux_siginfo.h.
1998-10-07 23:11:13 +00:00
ecdbc1172b
Regen.
1998-10-07 23:08:26 +00:00
358899800e
Change sys_mmap to NOARGS. (args defined in linux_sys_mmap.h). Typo: siginfo_t->linux_siginfo_t.
1998-10-07 23:07:30 +00:00
1a89cf484f
Move linux_sys_mmap declarations to linux_mmap.h Make sure oldmmap.c includes oldmmap.h.
1998-10-07 23:06:17 +00:00
8ce2ceae35
Fix typos.
1998-10-07 23:05:09 +00:00
a956aca8aa
This needs its defines.
1998-10-07 22:58:19 +00:00
47a9e7f352
Fix typos.
1998-10-07 22:50:42 +00:00
baf6c8420d
Fix types. Kill old declarations.
1998-10-07 22:45:51 +00:00
c7176f00e4
The siginfo include line is not needed here anymore.
1998-10-07 22:17:57 +00:00
3bd73b1ef1
Add prototype for linux_sigprocmask1().
1998-10-07 22:13:39 +00:00
ddbb7b3349
sigprocmask (non-rt) version doesn't exist on alpha. rename it to sigprocmask1 for use in linux_sys_sigprocmask and linux_sys_rt_sigprocmask.
1998-10-07 22:12:48 +00:00
30f959e6c6
sigprocmask (non-rt version) doesn't exist on alpha. Add it here.
1998-10-07 22:11:16 +00:00
010b1e5215
Erg, frame -> trapframe in last. (thanks to john kohl)
1998-10-07 21:25:35 +00:00
15eaa765b7
Files moved. Change the paths here.
1998-10-07 20:50:44 +00:00
b6553585ab
g/c leftover `{' in #if notdef; it confuses ctags(1)
1998-10-07 19:09:53 +00:00
b38544d99e
Oops, back out a buglet I didn't intend to commit in the last change.
1998-10-07 18:29:26 +00:00
4b23112e21
Add empty definition of __warn_references for lint.
1998-10-07 08:54:59 +00:00
d833f66c0c
Copyright stuff.
1998-10-07 07:22:32 +00:00
d976f73513
Enable interrupt AFTER autoconfiguration.
1998-10-07 06:24:58 +00:00
8c9bf4e881
Use the size field to distinguish between ADDX and ADDA. Fixes a problem
...
pointed out by Paul Goyette.
1998-10-07 06:08:47 +00:00
651280426e
Fix a problem pointed out by Paul Goyette: print_reglist() forgets that
...
it had a range of registers to print if A7 is among them.
1998-10-07 05:27:13 +00:00
31314a2d26
Mask clock interrupt properly if >= splclock.
1998-10-07 04:58:23 +00:00
bd7db8ba8a
Enable early probe stage printf's not by DIAGNOSTIC but more driver
...
specific macro constants.
1998-10-07 04:58:06 +00:00
568398bad2
regen data files
1998-10-07 01:08:57 +00:00
3067a16f6e
update for a broken variant of the Linksys E-CARD
1998-10-07 01:08:37 +00:00
8362affa14
Add a few "nop" instructions to make the memory size probe more reliable.
1998-10-06 22:26:42 +00:00
d374462dfc
Move the code that does the deferred (post-autoconfiguration) buffer
...
cache allocation to its own function, and call it at the end of configure().
1998-10-06 21:42:08 +00:00
abaeca8063
Move the calls to hwrpb_restart_setup() and cpu_run_spinup_queue() to the
...
end of configure().
1998-10-06 21:19:05 +00:00
2038eb830c
Split hwrpb_restart_setup(), putting the code that initializes the vtpb
...
and primary hwpcb into hwrpb_primary_init(). Call the latter before
performing autoconfiguration().
1998-10-06 21:10:46 +00:00
5a687aeb55
cold is already set to false at the end of configure().
1998-10-06 20:55:38 +00:00
d681cf055a
configure() prototype is in <sys/device.h>
1998-10-06 20:50:15 +00:00
fedd39b57d
Provide configure(), rather than open-coding it in cpu_startup().
1998-10-06 20:46:01 +00:00
e3672cdf8a
Prototype configure() here, and make it a machine-dependent call that
...
MI code expects to exist.
1998-10-06 20:44:40 +00:00
2727683a09
more DIAGNOSTIC sanity checks
1998-10-06 19:24:03 +00:00
0729240c88
Move the "XXX re-zero proc0 user area" to the end of configure(), before
...
interrupts are enabled.
1998-10-06 18:58:09 +00:00
44b31a4395
Use #error instead of causing parse errors; noticed by Heiko.
1998-10-06 18:38:08 +00:00
423c1d8dd3
Make AdvanSys narrow driver compile on BIG_ENDIAN machines.
...
Thanks to Izumi Tsutsui
1998-10-06 14:44:21 +00:00
3e8b7d3139
Only return COMPLETE when polling.
1998-10-06 09:32:44 +00:00
05ebc10205
Disable SCSI interrupts while polling for the transfer to finish. This
...
fixes spurious panics while booting my Hades. This bug could also occur
on a TT030.
1998-10-06 09:29:44 +00:00
8a20859c2e
Some DEBUG fixups
1998-10-06 09:22:01 +00:00
e3704a8e0b
Fix DEBUG printf
1998-10-06 09:19:36 +00:00
53b61ccd14
Avoid a compiler warning.
1998-10-06 08:51:14 +00:00
e7340f0ed3
Fix a potential Y2K bug on some clock chips: we were loading invalid
...
BCD into the year field of the RTC in years > 1999. It seems to have
worked just fine on my old broken down test machine, but apparently
some others actually get hurt. Suckage. We now make sure that we load
valid BCD.
Other ports should check for variations on this theme.
1998-10-06 05:52:23 +00:00
cd0dd24713
It seems taht 64-bit kernels need bigger stacks.
1998-10-06 05:18:55 +00:00
d0d18d5a83
Fix PIC code initialization.
1998-10-06 05:16:34 +00:00
75f5ffdf21
Change backplace0 to mainbus0 (for consistency with other ports).
...
Remove unused function protocols from ka410.h and ka43.h
Fix some ka46 missing references
1998-10-06 04:04:30 +00:00
72e565d9b1
Fix unassigned minaddr for uvm_km_suballoc.
...
Eliminate space at end of line, and so on.
1998-10-06 03:48:12 +00:00
6465aead84
Use braces instead of brackets to surround the SET_ICUS macro.
1998-10-06 02:43:26 +00:00
de39833622
Add wsdisplay, wsmouse and wskbd devices.
1998-10-06 02:41:22 +00:00
2bcc60adc6
Add declarations for wsdisplay, wsmouse and wskbd.
1998-10-06 02:40:13 +00:00
edbbf502ab
Add wscons devices and options.
1998-10-06 02:39:00 +00:00
8a012b843b
Include files.wscons
...
Add files.pckbc (commented out, pending fixing SHARK configs).
1998-10-06 02:37:59 +00:00
af8a94ec80
Code references should use movab, not moval. Fix gas-2.9.1 complaints
...
with intvec.s
1998-10-06 02:07:30 +00:00
08fbcdd506
Fix bug with the return value in filecore_label_locate(). This bug caused
...
an assertion to fail in disksubr.c if a label was written to a disk with
a filecore partition at the start of the disk.
1998-10-06 01:47:53 +00:00
71a653d388
Add Coda
1998-10-06 01:44:11 +00:00
c0dc3eb90b
ADFS -> FILECORE
...
ADFS is a IDE instance of the filecore filesystem so rename ADFS to FILECORE
to reflect the underlaying filesystem and to bring this in line with the
filecore filesystem in the tree.
1998-10-06 01:17:27 +00:00
bf4e491879
Fix boolean dyslexic test. Duh!
1998-10-06 00:41:13 +00:00
8e8f38e0f2
Add a sysctl for newreno (default to off).
1998-10-06 00:20:44 +00:00
5006dbf868
cpu_set_kpc() prototype is already in <sys/systm.h>.
1998-10-05 22:11:15 +00:00
29c8a3aa85
Regen.
1998-10-05 20:38:17 +00:00
1469dc411b
Correct vendor 0x1191 to "ACARD", add missing Matrox boards.
...
Fixes PR kern/6251 by Soren S. Jorvang.
1998-10-05 20:34:39 +00:00
40beab6ad6
If a lock is held do not spin in a read/write loop but just read the lock
...
until it is released. This is easier on the bus cache coherency logic.
1998-10-05 19:58:19 +00:00
11bc54234b
In epic_init(), attempt to start output on the interface once the interface
...
is initialized.
1998-10-05 19:10:22 +00:00
b4dba57069
Footbridge based kernels do not need constab.
1998-10-05 16:03:04 +00:00
e605a01dce
Footbridge based kernels don't use dev/cninit.c
1998-10-05 15:41:19 +00:00
a1ea50ee45
* in_pcblookup_port(): deprecate INPLOOKUP_WILDCARD and flags in favour
...
of a lookup_wildcard arg; simplifies the logic a bit.
* when assigning ephemeral ports in in_pcbbind(), always call
in_pcblookup_port() with lookup_wildcard=1, so that ephemeral port
allocation on sockets with SO_REUSEADDR set won't potentially bind to a
port in use by something else (principle of least surprise).
1998-10-05 14:33:14 +00:00
ce47e78c84
Make MIDI input work again.
...
Fix from Torsten Duwe <duwe@ns.lst.de>.
1998-10-05 09:21:41 +00:00
550ee6b308
rename getprop routine to avoid conflict with the one in bsd_openprom.h
1998-10-05 07:13:07 +00:00
ddde128de9
Track compat/linux/arch/* reorg.
1998-10-05 05:55:35 +00:00
8778509c45
* Make cpu_identify() routine table-driven.
...
* MIPS3 sanity check now allow MIPS1 models to boot.
1998-10-05 05:26:00 +00:00
b9fef4b8ad
The 2-disk install floppy allows us to add:
...
* 3000-series CPU support, plus all the tc devices
* 4100-series CPU support
* misc SCSI HBA support (removed earlier for space reasons)
1998-10-05 05:04:46 +00:00
4d17a0bfee
Reserve an 8K label area on every disk, not just the first. Rewrite the block
...
addressing and disk changing code. Separate disk addressing into three layers.
(virtual: ustar format space spanning volumes, logical: format space relative
to current volume, and physical: standard meaning). Compute a checksum of the
disk 0 8k label area, and define a label for disk 2, 3.... Detect incorrect
disk changing order and attempt to recognize our disk 0 from its checksum.
1998-10-05 04:56:36 +00:00
5d9338a24b
Don't put the fcom device in constab.
1998-10-05 02:46:31 +00:00
664d0f374c
Base configuration for CATS kernels.
1998-10-05 02:43:43 +00:00
35f31dce6e
Implement consinit() here instead of using the arm32/machdep.c version.
...
Use information passed from via the boot arguments to determine which
device to use as the console.
Add support for initialising the CATS ISA subsystem.
During the early bootstrapping use fcomcnattach()/fcomcndetach to enable
debug and diagnostic information to be sent to the diagnostic serial
port. This is only used during the early part of initarm() until things
have been relocated and the real console can be initialised().
1998-10-05 02:40:26 +00:00
8909a4e529
Define both EBSA285 and CATS bootinfo structure magic numbers.
1998-10-05 02:36:49 +00:00
4d8d0f4e6d
Define fcomcnattach() and fcomcndetach() functions for the diagnostic
...
serial port.
Disable the old probe and init functions as we no longer use constab and
cninit().
1998-10-05 02:36:02 +00:00
0d3d74ceeb
Footbridge based systems don't use cninit() so don't use the version of
...
consinit() defined here.
1998-10-05 02:33:46 +00:00
ed54968bff
Regenerate from usbdevs.
1998-10-05 02:31:13 +00:00
0f505e03ac
Add Cypress Semiconductor vendor ID and Cypress Mouse product ID.
1998-10-05 02:30:17 +00:00
c9937d0234
cleanup.
1998-10-05 02:01:57 +00:00
9f317a1a9d
Add syncicache after text loading.
1998-10-05 01:58:03 +00:00
86a0875460
Add dsrtc device and associated file.
1998-10-05 01:21:39 +00:00
f452e15aff
Add a driver for the Dallas Semiconductor RTC found on CATS motherboards.
1998-10-05 01:20:57 +00:00
18ccba3b4e
Make sure ISA interrupts have been setup prior to configuring devices.
...
This is not nice and a better solution is needed. Really this should be
done when the PCI-ISA bridge is discovered but it is possible that
some PCI interrupts may be routed via the ISA interrupt controller
and thus this needs setting up first.
1998-10-05 01:17:55 +00:00
91eeeff347
Add support for interrupts that are actually routed via an ISA interrupt
...
controller.
(I'm not happy with this approach but it works so I'll use it for the
moment until I complete run-time selection of the interrupt handling based
on recognised hardware).
1998-10-05 01:09:38 +00:00
197c78db08
Prototype isa_intr_alloc() (Needed by ISA PnP code) and sysbeep().
1998-10-05 01:05:00 +00:00
100a13e50a
Add ISA legacy mode support. Currently this is used by CATS kernels
...
which routes the PCI IDE interrupts in a similar fashion to i386 machines
(i.e. on ISA irq14 & 15).
1998-10-05 01:03:52 +00:00
dda219af66
Add file arm32/isa/isa_cats_machdep.c.
...
Build isa/isa_io.c and isa/isa_io_asm.S for both SHARK and ISA systems.
1998-10-05 01:01:43 +00:00
c2d2dca344
Initial commit of ISA bus support for CATS machines (DC21285 based
...
motherboards).
1998-10-05 01:00:57 +00:00
60e0cbbab8
Use sysbeep() rather than beep_generate for consistancy and the sysbeep
...
device.
KNF a chunk of this file.
1998-10-05 00:53:47 +00:00
67d78e486f
Remove beep related stub code now we have a sysbeep device.
1998-10-05 00:51:21 +00:00
4a1b880605
Add files.usb. It should work.
1998-10-05 00:49:15 +00:00
8eca271694
Add sysbeep device.
1998-10-05 00:49:13 +00:00
ae4624b175
Add sysbeep device with ISA and VIDC attachments.
1998-10-05 00:44:45 +00:00
6f5d4c52a1
sysbeep device attachments for vidc based audio systems.
1998-10-05 00:42:41 +00:00
5f37409d37
Implement sysbeep device for ISA systems. This just hooks into the pcppi
...
code.
1998-10-05 00:41:31 +00:00
20122120a2
Add arm32/isa/joy_isa.c and arm32/isa/joy_isapnp.c
1998-10-05 00:39:44 +00:00
5fe09f2a80
Add ISA and ISAPNP attachments for joysticks.
1998-10-05 00:35:40 +00:00
ec897ee047
Fix a problem reported by Michael Hitch. Basically, our libc relies on the
...
non-standard way of invoking sigreturn, specifically a side-effect that I
overlooked. Thus, longjmp's return value was getting clobbered.
Sigh, so burn trap #3 just as sigreturn.
XXX We need an SVR4-style {get,set}context(2) to avoid wasting new
XXX trap vectors in the future.
1998-10-05 00:00:17 +00:00
c1e5866bbe
Fix a typo in a comment.
1998-10-04 23:56:17 +00:00
2aac65de87
Regen.
1998-10-04 23:52:43 +00:00
a6a06368ce
Add S3 Virge/DX, fixes PR kern/6245 by Steve Allen.
1998-10-04 23:50:05 +00:00
c01f29bdf1
Sigh, we are going to have to burn a vector for Just Sigreturn again,
...
for now, until we have a more generic {get,set}context(). Update the
comment for trap #3 accordingly.
1998-10-04 23:38:55 +00:00
25054b5cf7
Adapt the NEWRENO changes from the UCSB diffs of BSDI 3.0's TCP
...
to NetBSD. Ignore the SACK & FACK stuff for now.
1998-10-04 21:33:52 +00:00
7a9e6fd3f7
Remove dead FPE option.
1998-10-04 19:03:37 +00:00
b2b0497860
Regen
1998-10-04 18:31:14 +00:00
ea1107f4c7
Add another soundblaster compatible card (Steve Allen)
1998-10-04 18:30:50 +00:00
e62c8fd824
Missed a conditional for FFS_EI; appears when we compile without -Ox
1998-10-04 18:07:57 +00:00
9ec65653f5
unobfuscate: !strncmp() != 0 -> strncmp() == 0
1998-10-04 16:51:18 +00:00
18632b9779
Regen.
1998-10-04 16:22:47 +00:00
9fabaa0ca6
Add a few more unimplemented syscall name placeholders.
1998-10-04 16:21:58 +00:00
227ea85cf0
Don't return EINVAL when nset is NULL in sigprocmask and the command is
...
invalid.
1998-10-04 16:21:13 +00:00
c413c43664
add hasremotelocks, but no support yet.
1998-10-04 16:20:16 +00:00
0c025c7e61
fix fdup2 implementation; it passes the file descriptor itself, not a pointer
...
to it in arg.
1998-10-04 16:19:50 +00:00
cf5be93206
Add ext2fs.
1998-10-04 11:45:44 +00:00
952dd0f6bc
There is no need to include ../linux/linux_ioctl.h.
1998-10-04 11:25:28 +00:00
26c9084f20
Fix pointer fuckup that made getdents() stop working.
1998-10-04 10:17:54 +00:00
19f71dc8ff
Fix wrong strncmp test.
1998-10-04 09:40:09 +00:00
8096c25afc
Assign my copyright to TNF. Merge with others were appropriate.
...
Regen syscall files after script change.
1998-10-04 00:02:23 +00:00
e6145e36a2
Correct Linux compat include file names.
1998-10-03 23:38:32 +00:00
2b727ad9e9
The linux compat i386 "files" file moved into arch/
1998-10-03 23:17:03 +00:00
6524452816
Fix confusion about about service types (from FreeBSD). Now dns resolution
...
works.
1998-10-03 22:03:07 +00:00
acce9b3b1b
Make this compile again when DEBUG is defined.
1998-10-03 21:58:52 +00:00
49a45fed9b
If the memory range of the machine is such that no bouncing is necessary,
...
or if the device is capable of 32-bit DMA (specified by ISABUS_DMA_32BIT),
clear the map's bounce threshold at map creation time.
1998-10-03 21:53:04 +00:00
01a1588265
Initialize the DMA map's bounce threshold to the tag's at map creation time,
...
and use the map's threshold when loading the map.
1998-10-03 21:38:48 +00:00
913cee1069
Merge in lite2 changes, and fix a typo that caused pool memory corruption.
1998-10-03 21:29:07 +00:00
10557b15d7
Add a private bounce threshold to the DMA map, initialized in a bus-dependent
...
fashion.
1998-10-03 21:24:00 +00:00
accc6fd407
Fix bug in TIOCLGET
1998-10-03 21:22:57 +00:00
10b5900f45
update for linux file move.
1998-10-03 20:39:32 +00:00
155e9efe9c
Don't install includes
1998-10-03 20:30:50 +00:00
af8c2a82b9
Remove this file.
1998-10-03 20:30:37 +00:00
96dc2f3c56
Remove stray debugging printfs
1998-10-03 20:28:03 +00:00
5f13e45116
Forgot those two.
1998-10-03 20:20:04 +00:00
908291d2fe
Attempt to fix the mess.
1998-10-03 20:17:36 +00:00
e00e31dcab
Integrated in common.
1998-10-03 20:02:26 +00:00
0a89614e93
Fixup big-endian syscall args.
1998-10-03 19:45:37 +00:00
fc6c67ff5d
Fixup big-endian syscall args.
1998-10-03 19:33:32 +00:00
1281be6b0e
Fix big-endian syscall args.
1998-10-03 19:31:24 +00:00
68458c66e4
Fixup big-endian syscall args.
1998-10-03 19:25:36 +00:00
903d20a930
Fix big-endian syscall args.
1998-10-03 19:21:11 +00:00
49b61257dc
Moved via repository copy.
1998-10-03 18:50:20 +00:00
5bc85e96b4
Moved via repository copy
1998-10-03 18:47:24 +00:00
a7ed63d0ee
moved via repository copy.
1998-10-03 18:45:22 +00:00
6e98c7aef2
Moved via repository copy
1998-10-03 18:44:32 +00:00
6e31782a3f
moved via repository copy.
1998-10-03 18:43:28 +00:00
c0f54daf70
Add em_alpha_exp
1998-10-03 18:17:14 +00:00
db12fcacf2
Add a few new machine numbers and aux vectors.
1998-10-03 18:13:58 +00:00
e24d09740e
call gate for solaris-2.6 syscalls [from frank]
1998-10-03 18:08:39 +00:00
36f308f4cc
Add an LDT for Solaris-2.6 syscalls [from Frank]
1998-10-03 18:05:25 +00:00
304929e7ff
regen
1998-10-03 16:15:39 +00:00
720885a1e9
Use a private implementation of sys_sigvec(). Ultrix uses an sv_flags bit
...
unknown to NetBSD and sigaction1() does (now?) complain about it.
1998-10-03 16:13:20 +00:00
192330fdc1
Assign to TNF completely.
1998-10-03 15:48:38 +00:00
835d1b736c
Make contsigmask, stopsigmask, sigcantmask kernel private.
1998-10-03 14:29:02 +00:00
b429e319fb
french keymap, from Matthieu Herrb <matthieu@mipnet.fr> per PR kern/6231
1998-10-03 12:02:45 +00:00
bdb85f9116
add definition for french keyboard
1998-10-03 11:59:44 +00:00
787fcfeac7
copyright has been assigned to TNF, update notice
1998-10-03 02:14:30 +00:00
c68106edad
Use #error instead of causing a parse error.
1998-10-02 21:21:04 +00:00
4a2e6e52a9
need "compat" dir to get emulation headers installed (for kdump)
1998-10-02 20:20:29 +00:00
d9cb3415b1
Fix typo (pointed by Matthias Drochner).
1998-10-02 20:00:28 +00:00
66d6e30a1b
Yet another workaround for pmap bugs. Several reports on the port-amiga
...
list claim this helps with some big-machine situations.
1998-10-02 19:29:49 +00:00
41c0179c3c
use old sigmask in sigcontext and old sigreturn syscall in Ultrix
...
emulation mode
1998-10-02 19:25:33 +00:00
0959469679
Also install if_gre.h in /usr/include/net/
1998-10-02 19:23:55 +00:00
18a5d4ffc6
set up old style sigmask on COMPAT_ULTRIX too
1998-10-02 18:59:56 +00:00
6b079d1e82
repair signal handling:
...
-use own sigcode since the native one uses a sigreturn syscall not present
in Ultrix
-route sigreturn to compat_13_sigreturn
1998-10-02 18:53:23 +00:00
5bcf824ff0
change debugging output in compat_13_sigreturn to distinguish from native
...
sigreturn
1998-10-02 18:49:00 +00:00
a366b483ec
compat_13_sigreturn is needed for compat_ultrix too
1998-10-02 18:46:58 +00:00
4345019cc0
implement a separate ultrix_sigcode[]
1998-10-02 18:44:32 +00:00
a30987cbf6
Re-arrange networking options a bit (Julian Coleman)
1998-10-02 12:50:35 +00:00
af5667d954
We have SA_NOCLDWAIT now, and for SA_SIGINFO, we ignore the bit, but we
...
always construct siginfo_t and pass it to the handler. So kill the printfs..
1998-10-02 11:54:16 +00:00
9cf8633378
back out previous.
1998-10-02 08:00:57 +00:00
c5aade90a8
Oops, ofppc don't have wscons.
1998-10-02 07:12:25 +00:00
ab915f7483
Oops, missing immediate qualifier, pointed out by Chas Williams.
1998-10-02 02:02:46 +00:00
e19b4629ab
Use wd.h, not wdc.h -- we are checking for the presence of disks, not
...
controllers. (there may be a controller which has only an atapibus
but no wd disks).
1998-10-02 01:37:51 +00:00
e1b25b7bd6
Make spec_write() process errors and return them, otherwise we don't even
...
notice things like hitting the end of a partition or device. (To be sure,
writes to block special files are rare, but as long as we support them...)
1998-10-02 00:21:39 +00:00
b28935cee3
Add missing field to le_softc structure, missed in previous commit. Name
...
it consistently with the other fields.
1998-10-02 00:20:52 +00:00
5dbf12a22a
Regen.
1998-10-01 23:33:25 +00:00
b7957e0200
Fix typo in 905BT4 product name.
1998-10-01 23:32:41 +00:00
78492e307a
If not MULTIPROCESSOR then identify the interrupt target cpu by hwrpb id (%d)
...
rather than attachment name, and hence avoid referencing `cpus'.
1998-10-01 22:57:30 +00:00
0bf5ff6ade
make this compile with DIAGNOSTIC again.
1998-10-01 21:26:55 +00:00
49c778c3b5
Use __LIBC12_SOURCE__, not __LIBC12_SOURCE :-)
1998-10-01 21:16:06 +00:00
9e2b536bef
Update for signal changes.
1998-10-01 20:41:29 +00:00
chuck