302f42d891
Add more CDC definitions.
1999-01-03 01:09:18 +00:00
aae0096c7c
More signal handling fixups.
1999-01-03 01:08:51 +00:00
6d990bf7f3
Add an ugly workaround for a bug (feature) in the NetBSD open()/close()
...
protocol.
1999-01-03 01:03:22 +00:00
bf1154922d
Add a length paarmeter to usbd_do_request_flags().
1999-01-03 01:00:56 +00:00
c67d9eac9d
Applied supplied patches from pr port-next68k/6709
...
add bus_space support for mono framebuffer
1999-01-02 13:42:17 +00:00
0f11abef49
Aded include for files.wscons so changes from pr 6707 to conf.c compile.
1999-01-02 13:30:45 +00:00
bb1f20f1fa
Reformatted changes from previous patch to match style guidelines.
1999-01-02 13:23:31 +00:00
70b3738d46
applied patch from pr port-next68k/6708: add wscons devices to next68k MAKEDEV
1999-01-02 13:14:18 +00:00
99c914d1be
Added check that M68040 is defined in case user interrupted creation
...
of assym.h, leaving it empty.
1999-01-02 13:03:20 +00:00
48d4303235
applied patch from pr port-next68k/6704: next68k zs driver formatting error
...
zs driver needs to print a newline.
1999-01-02 12:47:50 +00:00
d0e7a99a8a
Giant change: NBPG now set to 4k and CLSIZE == 1 for vax. This change
...
made a whole bunch of annoying bugs disappear; mostly depending on
bad use of NBPG in non-MD code. The VAX port was the only port that
used this historical "feature".
The CL* macros should probably go away totally, there is no reason
at all to keep them.
1999-01-01 21:43:17 +00:00
1678119a36
A little better support for 'trace' command.
1999-01-01 21:25:03 +00:00
872b1a1f2a
PCI I/O Start 16k because some devices allow only addresses
...
up to 64k.
1999-01-01 19:54:52 +00:00
000c8bbf35
Regen
1999-01-01 19:30:52 +00:00
512db6124c
Add Xircom Netwave driver from Michael Eriksson
1999-01-01 19:30:03 +00:00
c1edefd961
Fix bug in reading from interrupt pipe.
...
Make read and write on bulk pipes interruptible.
1999-01-01 15:31:24 +00:00
df2d00dcff
Add more structs.
1999-01-01 15:28:24 +00:00
16a2a55378
Add usbd_bulk_transfer(), a function to do interruptible transfer that
...
do not time out.
1999-01-01 15:25:57 +00:00
b7ae463e9f
Fix bug setting up endpoint descriptors for an interface.
1999-01-01 15:21:42 +00:00
a02f8e62f5
Add uDWord type for 4 byte USB structure fields.
1999-01-01 15:18:17 +00:00
bf9647a056
Set the correct transfer count on interrupt transfers.
1999-01-01 15:15:33 +00:00
dfd0f0f949
PR/6669: Michael Eriksson: pcic_chip_mem_alloc() can't handle large requests
1999-01-01 14:05:18 +00:00
1eb9f63a3c
bzero() -> memset() and bcopy() -> memcpy().
1999-01-01 12:42:47 +00:00
4a23b01275
Tidy up this file.
1999-01-01 12:41:13 +00:00
04d8f160e7
bzero() -> memset() and bcopy() -> memcpy().
1999-01-01 12:40:39 +00:00
cc829bbdde
Sync with reality.
1999-01-01 12:13:49 +00:00
d235c19724
This file has been replaced by makemodes.awk.
1999-01-01 10:28:57 +00:00
97036bd92c
Use makemodes.awk to parse the MDF files rather than building a custom
...
binary from makemodes.c. This makes cross compiling simpler.
1999-01-01 10:28:16 +00:00
8b0bd1ca77
Initial commit of awk replacement for makemodes.c
...
This is an awk script to parse an Acorn Monitor Definition File and
generate a C file containing the selected mode timing parameters.
Read the comments at the start of the file for details on use.
This file replaces makemodes.c
1999-01-01 10:26:41 +00:00
87f8cbd14e
Add a Communication Class header file.
1999-01-01 07:43:13 +00:00
13529d1878
bmac ethernet driver. (tested on iMac. only 10Base-T works.)
1999-01-01 01:27:52 +00:00
2197d0696d
The scsipi_adapter structure is part of the sfas_softc structure
...
rather than the csc_softc structure.
1998-12-31 09:44:42 +00:00
14a36628f5
Add a missing semi colon.
1998-12-31 09:37:12 +00:00
3a16b606a6
Implement autorepeat in raw keyboard mode.
1998-12-30 19:25:27 +00:00
a971be193b
Add USB keyboard type.
1998-12-30 19:15:11 +00:00
20f51aae57
Split usbd_delay_ms() into two functions, one can be used in
...
device drivers.
1998-12-30 18:06:25 +00:00
87fea0705b
Implement raw keyboard mode for X.
1998-12-30 18:03:37 +00:00
85ff7a3234
Fold line.
1998-12-30 17:48:48 +00:00
3b9a669a7d
Remove #include that slipped in at FreeBSD merge.
1998-12-30 17:46:20 +00:00
503bbd973d
Allow the wsmouse device to be opened for writing even if it is already
...
open, this way ioctl() can be performed on it and wsconsctl works.
1998-12-30 14:02:18 +00:00
44df4dcc85
Add a wscons display type `unknown' that the generic VGA driver can
...
return until someone fixes it for real.
1998-12-30 13:54:03 +00:00
446f262aa5
Regen
1998-12-30 13:50:42 +00:00
4d3847e0ea
Add NeoMagic MagicGraph 128ZV graphic chip.
1998-12-30 13:49:49 +00:00
a4a02fda54
Make it compile without USB_DEBUG, fixes PR 6689. Patch from
...
taca@sky.yamashina.kyoto.jp (Takahiro Kambe).
1998-12-30 13:25:54 +00:00
0ae031028d
Add a special wsmouse type for USB mice.
1998-12-30 13:14:21 +00:00
c96a4ad63d
Continued work on esp driver. Now successfully identifies a scsi target.
...
Unfortunately, to get dma to work, we have to align past the end of
the buffer, which smashes other variables on the stack.
match function still disabled, as it isn't ready yet.
1998-12-30 12:02:03 +00:00
3fec12a459
Added parens around ADD_BYTES_LIM() macro definition to protects its
...
use of the low precedence ?: conditional operator. This fixes a bug
in scsipi_interpret_sense when printing out debugging info.
1998-12-30 11:17:34 +00:00
85299e125c
Regen.
1998-12-30 03:55:49 +00:00
cce7071d57
Add iMac devices.
1998-12-30 03:52:30 +00:00
d3e627398e
changed register for start of dma buffer to be DD_NEXT_INITBUF instead
...
of DD_NEXT for regular dma transfers, and not just ethernet transmit.
Keep track of dma read/write direction and set it each time we start or
restart dma. This allows scsi to work, and doesn't appear to hinder ethernet.
1998-12-30 03:05:29 +00:00
21e272bf01
Do not blindly assume that a device supports language id 0, instead
...
ask it what languages it supports.
1998-12-29 16:02:55 +00:00
c047e03d90
Update copyright to the TNF standard.
1998-12-29 15:57:46 +00:00
9bcfc24c6b
Add some #if 0 code for keyboard console attachment.
1998-12-29 15:42:30 +00:00
5aa16bd113
Don't set configuration unnecessarily, some (broken) devices seem to break
...
if you do.
1998-12-29 15:33:10 +00:00
961d81ade7
Return more info in ioctl(USB_DEVICEINFO).
1998-12-29 15:27:16 +00:00
0f94f62616
The Peracom serial converter (like some other devices) claim to have
...
string descriptors, but gets very upset if you read them.
1998-12-29 15:23:59 +00:00
32f13388c5
Regen.
1998-12-29 15:21:33 +00:00
a7147eda73
Add Peracom serial converter.
1998-12-29 15:19:40 +00:00
6b5d35ee9d
Minor change in a debug printf.
1998-12-29 14:29:53 +00:00
683fd3dfba
Add some more useful #defines.
1998-12-29 14:27:33 +00:00
9ada0bf40f
check for end of tuple while reading cfe data
1998-12-29 09:03:15 +00:00
0380eb8f98
added SVEC_LANCARD
1998-12-29 09:00:50 +00:00
5d9e772403
added support for quirks based on cis strings, added quirk entry for SVEC_LANCARD
1998-12-29 09:00:28 +00:00
0de74697c4
rebuilt from pcmciadevs
1998-12-29 08:59:14 +00:00
b5f4f4dcfe
add SVEC losing ethernet card
1998-12-29 08:58:37 +00:00
bdf1b68276
iMac support (not complete yet).
1998-12-29 06:27:59 +00:00
8a5e34f28a
Fix a bug of last change.
1998-12-29 05:17:27 +00:00
47ff9e7c63
Implement short transfers.
1998-12-29 05:08:57 +00:00
d5fc963f0e
Add USB.
1998-12-29 04:40:19 +00:00
fe9a1b2b2d
Implement short transfers.
1998-12-29 04:15:04 +00:00
3064141641
Make it possible to specify the request flags when issuing a raw USB request.
1998-12-29 03:13:10 +00:00
16b49a78c6
New USB attach args.
1998-12-29 03:09:48 +00:00
4c9147cd38
Remove part of the bigendian patch that was not supposed to be commited.
1998-12-29 03:01:44 +00:00
d4fa2978fa
Imprive debugging message.
1998-12-28 21:05:47 +00:00
4386ae98b0
Send more information to USB attach routines so that they can claim
...
multiple interfaces.
1998-12-28 21:05:26 +00:00
dfad58d4e0
Change the host controller internal API a little and add some incomplete
...
support for isochronous transfers.
1998-12-28 20:13:59 +00:00
d6cab14b00
clean up headers
1998-12-28 19:12:26 +00:00
8ac99457db
I mean *really* clean up headers
1998-12-28 19:12:04 +00:00
b51e3fbf3c
clean up headers; remove early revision 2100 workarounds
1998-12-28 19:11:32 +00:00
e5e787230b
clean up headers; move uninit/watch to outer layers
1998-12-28 19:10:43 +00:00
9ccf227085
clean up header
1998-12-28 19:07:38 +00:00
c9cf2c5601
Fix typo.
1998-12-28 16:41:11 +00:00
1256add6be
Update for new name in usb.h
1998-12-28 16:13:44 +00:00
bf9e279952
Prepare for wsconsctrl:
...
- clean up keycode defines.
- allow easy parse of wsksymdef.h.
- add misssing KB_IT entry.
- set layout to KB_USER after ioctl WSKBDIO_SETMAP.
1998-12-28 13:48:24 +00:00
020a909cba
Add a lot of byte swapping to get the code to work on big endian machines.
...
Patch from Tsubai Masanari <tsubai@iri.co.jp>.
Add an extra controller reset. According to the OHCI spec it shouldn't
be necessary, but without some machines don't work.
1998-12-28 12:56:19 +00:00
3c6b7ccc2a
Cosmetics.
1998-12-28 12:52:38 +00:00
f4133e9fae
Update timing again (for bad devices).
1998-12-28 12:35:27 +00:00
058cf2a88c
Apply patch from PR port-arm32/6357 to make the wdc attachment to the
...
RiscPC mainbus work correctly.
From Richard Earnshaw.
1998-12-28 09:40:28 +00:00
767af4d82c
Add a check for r8 equal to 0 and do a quick exit if it is.
1998-12-28 09:39:02 +00:00
509315b9e0
We don't call prom_open() here anymore, so don't call prom_close() either!
1998-12-28 09:12:52 +00:00
be8213d207
Add some isoc defines.
1998-12-28 03:27:00 +00:00
2e0dbd3cc0
Add another power up wait so that some devices (that do not follow
...
the spec) start up more reliably.
1998-12-28 02:23:25 +00:00
cd36ca65dd
Fix typos.
1998-12-28 02:20:28 +00:00
8fe37fa62c
Cosmetics.
1998-12-28 02:06:25 +00:00
2ad7314a82
Configure only one wskbd/wsmouse.
1998-12-28 00:50:44 +00:00
e7e9a2e0e1
Use "interrupt" property if "AAPL,interrupt" is not found.
1998-12-28 00:38:18 +00:00
fe061a7ae4
- Eliminate dead code in TLB miss handler. Fortunately it has never been
...
executed. Once execunted, the result would be castrophic because it has
addressing error.
1998-12-28 00:31:03 +00:00
6afab47ac5
Be more careful when forming the TD endpoint field.
1998-12-27 23:40:52 +00:00
5c3f51a42a
Add quirk for bad version no. in audio control descriptor.
1998-12-27 23:38:13 +00:00
33f1482ece
Make sure recording is started before we return EWOULDBLOCK in a read().
1998-12-27 23:25:32 +00:00
496387c419
Fold lines to 80 chars.
1998-12-27 22:52:23 +00:00
89a7b98a55
Defopt POOL_DIAGNOSTIC and POOL_LOGSIZE.
1998-12-27 21:14:56 +00:00
e1315a2447
Make this compile with POOL_DIAGNOSTIC, and add a POOL_LOGSIZE option.
...
Defopt these.
1998-12-27 21:13:43 +00:00
f079e8d39c
Simplify the rttimer code somewhat; use TAILQs instead of CIRCLEQs (we
...
didn't really need to traverse the queues backwards anyhow), and other
minor code simplification.
1998-12-27 18:27:48 +00:00
da39a16267
Fold lines to 80 chars.
1998-12-27 13:03:58 +00:00
50cc03465e
Fix kern/6658 from Martin Husemann:
...
After booting a current kernel and receiving a few arp requests on the
network it panics (data modified on free list). The panic message is wrong,
as code inspection shows the memory pool for routing entries is intialized
twice, while the routing timer memory pool is never initialized.
1998-12-27 11:44:41 +00:00
ba3bedf25e
After some experimentation, now allow dma start alignment to be 4.
...
Removed separate alignment constant for ethernet since it appears to
be unnecessary.
1998-12-27 09:03:14 +00:00
bc72f5a29c
Make it table-driven. Besides making adding more devices easier, the resulting
...
code is 14% smaller (alas, for this file only).
1998-12-26 22:22:58 +00:00
e0c228ae9c
Merge changes to make the USB stack work with FreeBSD. The original
...
diffs from Nick Hibma <n_hibma@freebsd.org>, but with substantial
changes from me.
XXX Not tested on FreeBSD yet.
1998-12-26 12:53:00 +00:00
e21b4568e2
When a reference is made to a hole in a swap file, panic. The optimal
...
thing would be to allocate the block, but I don't know how to do this.
The panic is preferable to the random memory corruption the old code
was causing.
1998-12-26 06:25:59 +00:00
ea8f01b987
Continued experimentation on SCSI driver.
...
Added nextdma_debug variable to control debug printouts in nextdma driver
when ND_DEBUG is defined.
1998-12-26 06:17:44 +00:00
468355c5f0
Make configurable with no frame buffer.
1998-12-26 00:53:49 +00:00
7c25d335bf
s/are are/are/
1998-12-25 16:52:10 +00:00
2718914e14
fix incorrect panic message
1998-12-25 16:50:08 +00:00
ae7cea0a83
initialize a variable to avoid a false compiler warning.
1998-12-25 00:54:46 +00:00
b5afabb89a
check in generated files again so the included CVS id is correct
1998-12-25 00:54:11 +00:00
1a6e9eab49
add quirk support for cards which lie extensively about their CIS
1998-12-24 04:51:59 +00:00
2636bc951d
add code to permit pcmcia intr debugging
1998-12-24 04:50:43 +00:00
2cf34a47e0
The PCMCIA_PRODUCT_3COM_3CXEM556 requires the same CCR hack as the
...
3c562.
1998-12-24 03:59:00 +00:00
b6a56aac7f
add an entry to the products array for the
...
PCMCIA_PRODUCT_3COM_3CXEM556.
This device requires the same CCR hack as the 3c562.
1998-12-24 03:57:45 +00:00
c9ffa39a53
add product id for 3Com/Megahertz 3CXEM556
1998-12-24 03:55:54 +00:00
172852517b
Switch x68k port to UVM by default.
...
Mach VM and even old contig and non-contig codes are still alive.
1998-12-23 23:01:44 +00:00
c7f9823bf0
C_LABEL has no _ if __ELF__
1998-12-23 15:09:48 +00:00
6b7467980b
Add NetBSD note constants.
1998-12-23 15:09:09 +00:00
27e4ef39db
Add support for parsing OS type note fields.
1998-12-23 15:08:37 +00:00
b471830935
Sync with GENERIC.
1998-12-23 09:46:07 +00:00
9ec7c3c814
move sun3 to UVM by default. only pica/arc & x68k left.
1998-12-23 06:00:03 +00:00
7a738d840b
Make gcc happy by changing %x to %lx hiding in a DEBUG.
1998-12-23 04:53:44 +00:00
7d144777a3
#ifdef __STDC__ -> #if __STDC__
1998-12-22 21:21:36 +00:00
e392d933c8
Clean up some debugging stuff, and make it compile without warnings
...
with -DDEBUG on alphas.
1998-12-22 20:03:14 +00:00
86a0b96c10
Search "interrupts" property if "AAPL,interrupts" is not found.
1998-12-22 19:46:28 +00:00
89e0cc0a86
Display frame buffer type when attached.
1998-12-22 19:38:35 +00:00
1e7ee2d117
Determine the address of interrupt register at runtime.
...
(iMac has different address)
1998-12-22 19:35:49 +00:00
84af636530
vm_offset_t -> {paddr_t, vaddr_t}
1998-12-22 08:47:05 +00:00
da48906a74
Update for present reality.
1998-12-22 08:25:34 +00:00
5f69dedb2c
ipip_input() -> mrt_ipip_input().
1998-12-22 02:51:32 +00:00
12d0e6e8f7
move sparc{,64} installboot.8 back to src/share, to avoid splitting sources for users who dont get everything.
1998-12-22 02:34:09 +00:00
0a87ec1ac7
Use pools for rtentry and rttimer structures.
1998-12-22 02:27:06 +00:00
54377d1212
Simplify the tunnel lookup routine.
1998-12-22 01:49:04 +00:00
3322b9a32e
Add an extern declaration of gre_softc[] here. Wrap it and the prototypes
...
in #ifdef _KERNEL.
1998-12-22 01:33:45 +00:00
943f7cd0e7
In unp_internalize(), add a comment explaining why we must ALIGN() the
...
data after the cmsghdr when accessing internalized SCM_RIGHTS messages
(i.e. array of struct file *s). The historic interface does not align
the externalized SCM_RIGHTS messages (i.e. array of ints).
1998-12-21 23:12:19 +00:00
992f3b8ea7
Fix a fencepost error in unp_scan() which caused a bad pointer deref on
...
the SPARC platform only (ILP32 but ALIGNBYTES of 7), due to a missing
ALIGN().
1998-12-21 23:03:02 +00:00
07c96d75d6
Wait one second before powerdown.
1998-12-21 21:58:19 +00:00
c81639d273
Change quirk entry: "FX320S", "", " q01" to: "FX320S", "", "q01". This
...
space does seem to matter...
1998-12-21 21:40:12 +00:00
71fa656b19
use a symbolic definition for the PCI subsystem ID
1998-12-21 20:56:06 +00:00
c896b644ba
use a symbolic definition for the PCI subsystem ID
1998-12-21 20:40:01 +00:00
ac7ba300c0
add two of the newer register definitions
1998-12-21 20:31:54 +00:00
ebbe6623e2
Regen
1998-12-21 17:22:33 +00:00
2da45b8352
Fix typo.
1998-12-21 17:18:29 +00:00
84f4ab4fd0
Regen.
1998-12-21 15:45:20 +00:00
3c75aecaf5
Add ADS ethernet adapter.
1998-12-21 15:42:59 +00:00
45b5108fb1
regen
1998-12-21 13:43:11 +00:00
70a2fcddc2
change name of 82443BX according to Intel's data sheet
...
correct "no AGP" case to real topology of the chip
clarification: s/AGP Device/AGP Interface/
1998-12-21 13:37:00 +00:00
fc6df8006b
Make sure we don't spuriously detect more than one boot device (as the
...
previous patch but extended to all devices).
1998-12-21 11:25:39 +00:00
63d673f477
g/c SA_USERTRAMP (ok'd by pk)
1998-12-21 10:34:59 +00:00
795321b030
Make pmap_collect() actually do something useful. If called with a user
...
pmap, forget all of the mappings for the user address space for that pmap.
This causes the PT pages to be freed so that they can be reclaimed by the
VM system. [*]
[*] Actually, in the current implementation, it merely causes the wiring
count on the PT pages to drop to 0, which allows them to be reclaimed by
the pagedaemon. Handling of PT pages needs to be completely rewritten.
1998-12-21 09:02:43 +00:00
d6bc370c2d
Use a memory pool for pmap structures.
1998-12-21 08:51:39 +00:00
ce816d0c65
Regen
1998-12-21 07:57:17 +00:00
e0bd7401e6
PR/6619: Rick Byers: Add Motorola ModemSurfr
1998-12-21 07:57:00 +00:00
43b82d559c
Improve pmap_copy_page() and pmap_zero_page(). Don't use pmap_enter()/
...
pmap_remove() for the temporary addresses. This is completely unnecessary
as the temps are used ONLY for these routines, and we have better control
over the mapping by manipulating the PTE ourself. On VAC systems, cache-
inhibit the mapping to prevent wasting a cache load.
These routines are now significantly faster.
Add a DIAGNOSTIC check in pmap_enter() for kernel pmap and (CADDR1 or CADDR2);
nothing should be adding mappings there via that interface.
1998-12-21 06:58:39 +00:00
6c040077b9
Install kbdreg.h. The Xserver needs it.
1998-12-20 23:17:48 +00:00
981a2987e6
Regen
1998-12-20 18:54:52 +00:00
b8041892e9
Add another modem.
1998-12-20 18:54:37 +00:00
4d2e9f8e9d
Add "pcic0 at pci?".
1998-12-20 17:56:18 +00:00
788ff053de
Fix up support for PCI attachments of pcic devices on i386 in general,
...
and the Cirrus Logic CL-PD6729 in particular.
From danw@mit.edu in PR port-i386/6436.
1998-12-20 17:53:28 +00:00
5ca15dd95f
Delete __extension__ on non-GCC or GCC1.
1998-12-20 17:46:46 +00:00
2e81b6b5f8
regen
1998-12-20 16:06:25 +00:00
6eb0418fdb
add a Zoran multimedia controller chip
1998-12-20 16:05:32 +00:00
75c4b3bf70
Changed grf mmap that it is closer to XFree. VGA memory on et4000/et6000
...
is now at offset 0xa0000.
1998-12-20 14:32:34 +00:00
6292c7eda0
Make midi_attach_mi() and audioprint() available also if MIDIBUS
...
(but not necessarily MIDI) is defined.
Fixes PR port-i386/6615 (Krister Walfridsson <cato@ulysses.df.lth.se>).
(XXX this should probably go into a separate file to get rid of
the #ifdef mess)
1998-12-20 14:26:44 +00:00
051cc552ae
New code to enable PCI devices.
1998-12-20 14:24:52 +00:00
e3504362c9
Regen.
1998-12-20 03:53:03 +00:00
7003241eab
Add IBM Wireless LAN Entry and Xircom CreditCard Ethernet+Modem.
1998-12-20 03:52:40 +00:00
d114556e2a
Avoid using "generic" configuration table entries during first
...
resource allocation attempt - would crash system if a generic entry
preceded a workable specific entry.
Rearrange a little for clarity.
1998-12-20 03:49:53 +00:00
51d0670371
Clean up a whole load of comments, making many of them truthful, and
...
indicating which functions are INTERFACE vs. which aren't.
1998-12-20 01:15:52 +00:00
80e50e26a8
Unclutter a bit. Use a PMAP_DPRINTF() macro where possible, getting rid
...
of loads of #ifdef DEBUG ... stuff.
1998-12-19 23:51:47 +00:00
9670878a82
Regen.
1998-12-19 23:48:39 +00:00
f920aee0b3
Add original Xircom CreditCard Ethernet.
1998-12-19 23:47:51 +00:00
6659e7174e
In pmap_testbit(), if we end up traversing the PV list, cache a hit on the
...
bit to speed future tests.
1998-12-19 23:21:51 +00:00
97f422e85b
Make pmap_changebit() take bits to set and a PTE mask, rather than a bit
...
and a boolean.
1998-12-19 23:01:47 +00:00
3de0336b7c
Protect a keyup event for ADBK_3 in the mouse button emulation code with
...
ALTXBUTTONS, so as to not cause trouble with some non-US English
keyboards. From SUNAGAWA Keiki, PR 6613.
1998-12-19 21:41:13 +00:00
d36a60d9cb
G/c PMAPSTATS. It's unneeded clutter right now.
1998-12-19 21:11:14 +00:00
6036a3463e
Fix bufpages miscalculation. At the same time, make bufpages configurable
...
att compile time.
1998-12-19 20:06:36 +00:00
a127a479d7
Add 'ex' driver and various mii stuff, from GENERIC.
1998-12-19 20:06:30 +00:00
459052a0fb
Wire down some SCSI disk units.
1998-12-19 20:05:19 +00:00
75c1333e8e
A "return 1" should be "return 0". Caused machine to crash as soon as
...
it started paging.
1998-12-19 20:03:23 +00:00
bdafd9591e
Add "ustarfs" as a recognized boot file system type, and bump version number.
1998-12-19 19:44:56 +00:00
02cf5984b5
Retry ustarfs_cylinder_read after disk change, apparently required on i386.
1998-12-19 19:24:32 +00:00
2cfee96f35
Implement -b option, similar to on alpha, required for ustar floppy support.
1998-12-19 19:17:23 +00:00
8b9671f0f5
get "opt_compat_xxx.h" includes out of <sys/signal.h>
1998-12-19 16:27:09 +00:00
dafe2a2b81
Some BIOSes return occasionally with carry set from APM_CPU_IDLE/BUSY
...
calls, without setting a defined error code. This leads to annoying
output. Put the printout inside APMDEBUG.
1998-12-19 14:46:10 +00:00
db8bf6a623
Revamped DMA interface to unify chaining and non-chaining dma sequences.
...
Updated ethernet driver to work with new interface.
Continue work on esp driver.
1998-12-19 09:31:44 +00:00
12632ebf71
Reverse the copyright-notice-swap. It went against existing practice.
1998-12-19 02:46:12 +00:00
d15dc38fd9
Changes from FreeBSD:
...
Implemented a more sophisticated mechanism for handling transmitter
interrupts which now defers them until the transmit queue if filled
up with completed buffers. This has two advantages: first, it reduces
the number of transmitter interrupts to just 1/120th of the rate
that they occured previously, and two, running down many buffers
at once has much improved cache effects.
Defer rundown (m_freem) of completed transmit buffers for no longer
than 1 second.
This brings us up-to-date with the most recent "fxp" driver in FreeBSD.
1998-12-19 01:14:37 +00:00
cb707caaeb
Add the Compex Linkport ENET-B Ethernet card, PR #6349 , Ingolf Koch.
1998-12-18 22:10:29 +00:00
95b5eb860d
Regen.
1998-12-18 22:07:53 +00:00
fc685b5db5
Oops, tyop.
1998-12-18 22:07:39 +00:00
e2614a90c2
Regen.
1998-12-18 22:07:00 +00:00
1142e9ca93
Add the Compex vendor ID, and product ID for the Compex Linkport ENET-B.
...
PR #6349 , Ingolf Koch.
1998-12-18 22:04:48 +00:00
f64a09cf13
Replace a use of << with the LSOP macro, to fix a specific problem on
...
little-endian machines. PR #6390 , Ben Harris.
1998-12-18 21:59:34 +00:00
875666be42
Add the SVEC/Hawking Tech. Combo card. PR #6461 , Rafal Boni.
1998-12-18 21:54:14 +00:00
1f7f191ac9
Regen.
1998-12-18 21:53:08 +00:00
f86bb230f6
Add the SVEC/Hawking Tech. combo card. PR #6461 , Rafal Boni.
1998-12-18 21:52:53 +00:00
92229a04c1
Quiet some diagnostic messages when we might expect them to happen.
...
PR #6460 , Rafal Boni.
1998-12-18 21:50:16 +00:00
489d6d0e46
Reverse the stopgap change made in revision 1.29:
...
date: 1998/08/01 01:47:24; author: thorpej; state: Exp; lines: +18 -8
Don't call the protocol drain routines if how == M_NOWAIT, which typically
means we're in interrupt context. Since we can be called from a network
hardware interrupt, we could corrupt the protocol queues we try to drain
them at that time.
The problem has been addressed by letting the drain'able protocols use
a locking scheme to prevent queue corruption.
1998-12-18 21:40:14 +00:00
4f177aec90
Add a lock around the TCPCB's sequence queue, to prevent tcp_drain()
...
from corrupting the queue if called from a device's interrupt context.
Similar in nature to the problem reported in PR #5684 .
1998-12-18 21:38:02 +00:00
ca15e01c76
Add a lock around the IP fragment reassembly queue, to prevent ip_drain()
...
from corrupting the queue if called from a device's interrupt context.
Should fix PR #5684 .
1998-12-18 21:35:11 +00:00
d9e7d7e6a1
Add support for the Corega PCC-T Ethernet, PR #6603 , Takahiro Kambe.
1998-12-18 21:14:17 +00:00
75553e60bf
Regen.
1998-12-18 21:12:32 +00:00
eee452e216
Add Corega vendor ID and product CIS info for the PCC-T Ethernet card.
...
PR #6603 , Takahiro Kambe.
1998-12-18 21:12:14 +00:00
30f21adec4
Regen.
1998-12-18 21:08:37 +00:00
6779120f4a
Add product ID for the Yamaha 724 Audio device. PR #6605 , Dave Sainty.
1998-12-18 21:08:19 +00:00
3bd57bb34b
Correct a panic message.
1998-12-18 19:52:11 +00:00
ba4af3c3de
regen
1998-12-18 18:59:06 +00:00
b71f154130
remove compat_xxx dependencies where they don't belong
1998-12-18 18:49:59 +00:00
52c16cf83a
get "opt_compat_svr4.h" out of <sys/conf.h>
1998-12-18 16:55:39 +00:00
0f6572f2b1
COMPAT_xxx option review: add missing opt_compat_netbsd.h
1998-12-18 15:49:40 +00:00
9d0b08a2b5
OMPAT_xxx option review: add missing opt_compat_sunos.h
1998-12-18 15:08:21 +00:00
9973d1abaa
COMPAT_xxx option review: add missing opt_compat_netbsd.h
1998-12-18 14:24:43 +00:00
8ece294afc
COMPAT_xxx option review: add missing opt_compat_linux.h
...
alpha -> __alpha__
1998-12-18 14:10:06 +00:00
c22ef79250
solve the COMPAT_OLDSOCK/MSG_COMPAT problem differently:
...
The source files which need MSG_COMPAT define COMPAT_OLDSOCK.
1998-12-18 13:18:42 +00:00
776ca9e185
back out previous; it breaks when MSG_COMPAT is not defined (no compatibility modules)
1998-12-18 13:00:33 +00:00
9595b984ec
teach fxp about rnd_*()
1998-12-17 23:25:29 +00:00
c9eb836a6a
Return ENODEV when the device capability check fails for MOVE and EXCHANGE
...
operations.
1998-12-17 22:28:07 +00:00
1b30d7e440
Correct the definition of the changer device capabilities page. The
...
previous definition confused some reserved bytes for exchange capabilities.
1998-12-17 22:27:18 +00:00
fec2cc52f3
T_SVR4_GETHRESTIME returns a nanosecond quantity in %o1.
1998-12-17 22:26:02 +00:00
2d5b32dd03
fix an invalid panic message.
1998-12-17 17:45:08 +00:00
85078af6c4
Add a new quirk flags, "ADEV_NOSENSE", for devices that don't
...
handle properly the request sense command. Add <FX320S, , q01> as being
sense-unfriendly in the quirk table.
1998-12-17 13:05:05 +00:00
271b8ff5ba
Sync with GENERIC
1998-12-17 06:46:55 +00:00
ec630d208f
Fix some "unused variable" warnings (if !HAVE_CACHE)
1998-12-17 06:17:45 +00:00
67693a18b7
Sync with "GENERIC" and fix description.
1998-12-17 00:07:08 +00:00
72bcdb203b
Synced with GENERIC.
1998-12-16 14:10:38 +00:00
f1addbd3fd
Defer mapping of pci interrupt to pciide_mapregs_native(). This way,
...
the native interrupt shouldn't be mapped if a channel is in native mode,
but disabled.
1998-12-16 13:21:26 +00:00
945acd7834
Leave some room for the string-terminating char in temp. buffers.
...
Pointed out by Scott Presnell (thanks !).
1998-12-16 13:06:52 +00:00
c37bf0ccb4
Keep track of DMA errors, and downgrade the transert mode (UDMA ->DMA,
...
DMA->PIO) in case of 2 consecutive errors. Don't downgrade if the
PIO/DMA/UDMA modes were forced by a config flag.
1998-12-16 13:02:03 +00:00
1f0d6730cc
Switch to single-sector transfert mode only for the last retry, to let
...
a chance to the underlying driver to downgrade the mode first.
1998-12-16 13:00:02 +00:00
2093338697
Rearange the modes setup to allow these to be dyanmically changed. Fill
...
in the new "set_mode" callback.
1998-12-16 12:48:45 +00:00
94f32463dc
Add a callback to re-compute the modes used on a channel.
1998-12-16 12:46:47 +00:00
5b07a26bc4
Add a commented out entry for tcom.
1998-12-16 11:42:07 +00:00
bbe8b4dde5
Add Byte Runner Technologies TC-400 and TC-800 driver from Eric S. Hvozda
1998-12-16 11:33:50 +00:00
1b6a24c1d4
Support for compound statements enclosed in parenthes to appear as
...
expressions is a GNU C extension; mark as such them with __extension__ to
suppress portability warnings. Addresses kern/3562 and misc/6185, as suggested
by Dave Sainty <dave@dtsp.co.nz>.
1998-12-16 11:11:02 +00:00
4df2e84306
Another COMPAT_43 lossage fix (reported by Richard Earnshaw)
1998-12-16 11:01:01 +00:00
1dd3565a09
Fix a long standing bug in wait(2) where the signal was left untranslated,
...
and defensively code the signal translation.
1998-12-16 10:36:50 +00:00
f9ac5ff367
more defensive signal conversion, and fix a malloc sizeof(int) to sizeof(int *).
1998-12-16 10:21:50 +00:00
cb7b801ca0
& 0xff WSTOPSIG and WEXITSTATUS, since only 8 bits are significant.
1998-12-16 10:08:35 +00:00
4a01b776e5
Prototype pool_print() and pool_chk() if DEBUG.
...
Initialize pool hash table with PR_HASHTABSIZE (i.e., 8) LIST_INIT()s
instead of one memset().
Only check for page != ph->ph_page if PR_PHINPAGE is set (in pool_chk()).
Print pool base pointer when reporting page inconsistency in pool_chk().
1998-12-16 04:28:23 +00:00
93454aafc6
Delay sending if SS_MORETOCOME is set in so_state. This avoids the case
...
where the user issued a write with a length greater than MLEN but less
than MINCLSIZE, thus causing two mbufs to be used. The loop in sosend()
would then call PRU_SEND twice, causing TCP to transmit 2 packets when
it could have transmitted one.
Suggested by Justin Walker <justin@apple.com> on the freebsd-net
mailing list.
1998-12-16 00:33:14 +00:00
2ef3bcfbb8
In the sosend() loop, if the residual count is > 0 before calling PRU_SEND,
...
set SS_MORETOCOME as a hint to the lower layer that more data is coming
on the next iteration of the loop. Clear the flag after the PRU_SEND
call.
Suggested by Justin Walker <justin@apple.com> on the freebsd-net
mailing list.
1998-12-16 00:26:10 +00:00
6977737a82
Add a new socket state flag SS_MORETOCOME, to indicate to the lower layer
...
that more data is about to arrive in a PRU_SEND.
Suggested by Justin Walker <justin@apple.com> on the freebsd-net
mailing list.
1998-12-16 00:24:10 +00:00
36416d8500
Added options COMPAT_LINUX and EXEC_ELF32 as comments
...
to GENERIC configuration files.
1998-12-15 19:50:00 +00:00
c05dadc113
Added COMPAT_LINUX support.
1998-12-15 19:36:36 +00:00
0c080222db
Added linux compat support on m68k ports.
1998-12-15 19:31:30 +00:00
e0f218ab08
Generated from syscalls.master.
1998-12-15 19:28:31 +00:00
0176ca73ed
Initial support of Linux/m68k compatibility.
1998-12-15 19:25:40 +00:00
b4cf442656
Fix a MIDI buffer overflow problem. Fixes PR 6583.
...
Patch from Ales Krenek <ljocha@ics.muni.cz>
1998-12-15 18:03:07 +00:00
a6406e330a
1000000000 nsec != 2^32 nsec. (from kleink). Also had eax and edx backwards.
1998-12-15 16:10:42 +00:00
9a2a015957
1000000000 nsec != 2^31 nsec (from kleink)
1998-12-15 16:06:15 +00:00
4f720cad14
make sure programs cannot write to the screen while it is in graphics mode
1998-12-15 14:25:59 +00:00
57186cce33
Slight code rearrangement and more defensive tests for the sequencer device.
1998-12-15 10:32:16 +00:00
cb022e620d
Initialize field to indicate fragment block.
1998-12-14 23:44:04 +00:00
920aad33e4
Support for Hypercom 3+ / 4+. Untested yet, but its only some additional
...
entries in a table.
1998-12-14 20:33:45 +00:00
643e0d4cc2
Added intr.h
1998-12-14 19:04:58 +00:00
342b5e5134
Also need to initialize the queue length of a newly allocated fpstate.
1998-12-14 16:18:46 +00:00
b40f2a1c88
Make egcs happy.
1998-12-14 15:22:04 +00:00
2e89d55ed4
Deal with an unusual response on port selftest commands. This makes at
...
least John Kohl's crappy Dell box work.
1998-12-14 13:54:25 +00:00
4a40350c5d
Nuke some #ifdefs that no longer work with COMPAT_43 defopted.
1998-12-14 13:03:19 +00:00
8bb7627336
- Fix typos in commentary description.
1998-12-14 02:45:51 +00:00
80f51bcef4
Add an entry point for the solaris 2.6 fast trap vectors, used by the
...
high resolution timer calls.
1998-12-13 19:31:26 +00:00
4959a9fca6
Add defines for the fast trap vectors.
1998-12-13 19:27:51 +00:00
a2aacaedde
Add -Werror and -Wmissing-prototypes, like most other ports do.
1998-12-13 19:19:38 +00:00
139600e069
add include "opt_compat_43.h" otherwise, if this is our only compat option,
...
we don't link (reported by Klaus Klein).
1998-12-13 19:19:34 +00:00
adddbfb644
obio_find_mapping(): int -> vaddr_t where appropriate.
1998-12-13 19:08:43 +00:00
58f85c298a
Printf format warning cleanup: the type of the result of a shift operation is
...
that of the promoted left operand.
1998-12-13 18:14:30 +00:00
885e96c95e
Correct problem with UESP, still does not work properly.
1998-12-13 18:07:27 +00:00
49be13158d
Make gerlimit(RLIM_NOFILE, rlp), return rlp->rlim_max == maxfiles, not
...
RLIM_INFINITY like we do. Java uses rlim_max to allocate a data structure
per file descriptor.
what we do is bogus anyway, because:
setrlimit(RLIM_NOFILE, {RLIM_INFINITY, RLIM_INFINITY}}
sets the limit to { maxfiles, maxfiles }
I undestand that this is so that if we change maxfiles via sysctl, processes
can still use the new maximum, but it is probably more appropriate to return
the current value of maxfiles (and maxproc) at every getrlimit call, even
if the current value for either is RLIM_INFINITY.
Anyway, java now works on the the sparc, on the i386 loses on setcontext().
1998-12-13 18:00:52 +00:00
072888839b
Printf format warning cleanup.
1998-12-13 18:00:10 +00:00
1bf1bbfc56
xdc_piodriver: sync function definition with declaration; also eliminates
...
the use of a char as an array subscript.
1998-12-13 17:57:19 +00:00
6aa085a693
Splitted out the interrupt handling code to a separate file.
...
Disallow getting down the interrupt level by splXX.
1998-12-13 15:04:01 +00:00
b33907f299
Don't DMA the scsi command from or the sense data to the scsipi_xfer
...
directly. That would require that we map the scsipi_xfer into DMA
space. Instead, copy to/from the NCR CCB, which the script already
has to DMA to/from. These copies are small, and don't seem to affect
performance.
1998-12-13 00:11:37 +00:00
178fc3cc05
Step 3:
...
Use DMA maps for the actual data transfers.
1998-12-12 23:41:56 +00:00
2b1c171400
appease egcs-1.1.1.
1998-12-12 20:05:07 +00:00
bdaefe06f3
Synchronize with the Ultrix version of the ppp release.
1998-12-12 18:22:39 +00:00
a0823f0a89
#include "opt_ppp.h" otherwise struct ppp_softc can be the wrong size
...
(From mycroft)
1998-12-12 18:21:32 +00:00
b28c62f40d
Run async_update() even if something is select()ing.
1998-12-12 17:29:39 +00:00
b3c9835be1
r13-r15 -> sp, lr, pc
1998-12-12 17:28:05 +00:00
c748ecf74a
fix thinko in previous change.
1998-12-12 17:26:09 +00:00
95aa0d0b7d
Simplify the copy loops a bit.
1998-12-12 16:58:10 +00:00
90b7cbc727
Simplify argument to MGET(), to generate better code.
1998-12-12 16:36:24 +00:00
a6717054a4
Slight simplification to previous.
1998-12-12 16:31:34 +00:00
be595f36c4
document support for Intel 82557/82558
1998-12-12 15:51:49 +00:00
6f71e420f3
add support for the Intel 82557/82558 fast ethernet chip
1998-12-12 15:47:05 +00:00
eeb8a988a9
Oops, I commited the wrong version before.
1998-12-12 12:18:26 +00:00
f8c84e3e97
Initialize variable to make gcc happy.
1998-12-12 12:06:53 +00:00
ef6d3553ea
Move initialization of sce around.
1998-12-12 11:59:28 +00:00
02b9dc7632
Switch to MACHINE_NEW_NONCONTIG (Yea! Finally!:)
1998-12-12 05:28:24 +00:00
e7810fa812
Fix MACHINE_NEW_NONCONTIG support (UVM works now:)
...
thanks to Izumi Tsutsui <tsutsui@ceres.dti.ne.jp>
Closes PR#6540
1998-12-12 05:25:01 +00:00
3cc30b3641
Step two:
...
Use DMA-safe memory for the script instances. The most important thing
here is that is guarantees that the script is contiguous in DMA space.
1998-12-12 00:19:13 +00:00
2f2fd097ef
remove this insanity. appeared with ipfilter 3.2.10...
1998-12-11 23:47:16 +00:00
086b4b0bf1
Step one of bus_dma'ing the PCI NCR driver:
...
Separate the ncb (i.e. softc) members that are accessed by the script into
a separate structure. Allocate one of these structures in DMA safe memory
using bus_dma, and change RELOC_SOFTC to use the DMA address of this
structure.
1998-12-11 23:21:11 +00:00
ebd6430388
Add some brackes to make EGCS happy.
1998-12-11 18:46:18 +00:00
augustss