70d4ac07b6
Yet another path where we need to set PCIC_INTR_ENABLE.
1999-02-19 00:27:45 +00:00
f2c4e7f8bd
Use the correct interrupt sharing type, and set PCIC_INTR_ENABLE(!).
1999-02-18 23:41:40 +00:00
74028ea9fd
Regen.
1999-02-18 22:32:27 +00:00
b71baddba7
Add ID for MagicRam SwapBox PCMCIA controller card.
1999-02-18 22:31:32 +00:00
a473ed5477
Fix omission in previous.
1999-02-18 19:24:39 +00:00
18e341a954
Add separate halt_input and halt_output methods in ad1848_isa, which disable
...
the DMA channel.
1999-02-18 17:27:39 +00:00
9907eda026
spaces -> tabs
1999-02-18 16:09:01 +00:00
81bc49921a
Remove some superfluous softc elements.
1999-02-18 15:47:29 +00:00
7e5acb7709
Don't print an extra newline if the controller doesn't support 32 bits access.
...
Pointed out by Dave Huang.
1999-02-18 14:45:31 +00:00
e96144a012
Add a missing ':'. pointed out by Dave Huang.
1999-02-18 14:44:34 +00:00
699a815751
Pass the correct address (PCI bus address, not PA) to the card.
...
Also fix some typos and add more debugging printf()s.
This would work on the Alpha, but the card I have appears to have the upper
address bits chopped off, and the ring buffer gets mapped using the DGMAP,
which uses the upper bits. Boom.
1999-02-18 09:22:17 +00:00
e0b748e50c
Pass the correct address (PCI bus address, not PA) to the card.
...
Works on an Alpha now.
1999-02-18 07:59:30 +00:00
5e2fc07a14
Add separate halt_output and halt_input routines.
1999-02-18 07:08:35 +00:00
c02bf3c4d7
Minor code munging.
1999-02-18 05:46:38 +00:00
cfb2342145
Fix the code in epic_attach() that frees resources when the attach fails.
1999-02-18 02:24:30 +00:00
5c457e71fe
Only do the multicast filter bug work-around if in 10Mbps mode. Also,
...
don't reset the interface if the multicast list changes. Just reprogram
the multicast hash table.
1999-02-18 02:12:09 +00:00
982603ce5b
Don't reset the interface when the media changes.
1999-02-18 01:24:29 +00:00
78e18b8d8c
Back out to the previous stable revision of the fxp driver. The latest
...
one had too many stability problems.
1999-02-18 01:23:41 +00:00
6ce15ae4e3
spaces -> tabs
1999-02-18 00:55:36 +00:00
f1e84a4ec5
A few things:
...
* Use the trigger interface.
* Permit different encodings for record and playback.
* Set AUDIO_PROP_INDEPENDENT.
* Fix the mmap(2) hole again.
* Use 16-bit mode for a-law and u-law playback.
1999-02-18 00:54:19 +00:00
8b7b7cccc7
Fix a silly type.
1999-02-17 23:55:18 +00:00
27963c294a
Use the trigger interface, and clean up a pile of cruft.
1999-02-17 23:05:28 +00:00
71105fbda7
Update comments.
1999-02-17 21:44:55 +00:00
6d0cb6e410
Change a straggling splimp -> splnet.
1999-02-17 09:11:29 +00:00
69a4436f8b
Avoid initializing the interface in the SIOCSIFFLAGS if ! UP and ! RUNNING.
1999-02-17 03:40:59 +00:00
7741cae143
Fix slight ommission in previous.
1999-02-17 02:43:13 +00:00
e5f5e628d2
Pass the direction to the allocm and round_buffersize methods.
...
Some drivers need this to properly allocate DMAable memory.
1999-02-17 02:37:38 +00:00
88ad3aa42b
If we have an 8-bit DRQ, always pass that to isa_malloc().
1999-02-17 01:22:47 +00:00
2c7fa23c38
Fix Copyright dates
1999-02-16 23:34:10 +00:00
dc068e0d1f
Assign my files to The NetBSD Foundation, Inc.
1999-02-16 22:46:55 +00:00
2ccd5cde74
Correctly compute PIO/DMA mode for sis and acer chips when the drive support
...
a DMA mode with higther capabilities than PIO mode.
1999-02-16 18:11:52 +00:00
d683e62685
Be less strict on ATAPI signature, at last one CD puts 0x00 in sc instead
...
of 0x01.
1999-02-15 18:47:59 +00:00
13e811e874
Revert to 1.23, this was not supposed to be checked in yet.
1999-02-15 18:43:08 +00:00
18496766b2
For CDIOCCLOSE, ignore media changes, as some drive seems to return this
...
info here.
1999-02-15 18:41:04 +00:00
379429d4df
If the REQUEST_SENSE command fails, issue a reset instead of XS_DRIVER_STUFFUP.
...
If REQUEST_SENSE succeeds but doens't return any data, return XS_SHORTSENSE
as the sense field will just contain a copy or the error register.
1999-02-15 18:40:01 +00:00
56f2d188fc
RCS ID police
1999-02-15 04:54:34 +00:00
fd9002550c
Make the reset even longer do cater for really bad devices.
1999-02-15 00:32:16 +00:00
210b267f84
Regen from pcidevs.
1999-02-14 22:44:36 +00:00
acb24b6080
Add 3Dfx's Voodoo II. Fixes PR kern/7000 by Brett Lymn.
1999-02-14 22:38:18 +00:00
e523f4968b
Make sure full-duplex is reflected in TXCON, and don't reset the interface
...
when the media changes.
1999-02-13 21:08:08 +00:00
4d5a04afc4
MI version of the Fujitsu MB89352 SCSI Protocol Controler (SPC) driver.
...
Based on experimental NetBSD/pc98 ISA/PISA version, which was derived
from the MD /sys/arch/x68k/dev/spc.c.
1999-02-13 17:33:14 +00:00
94719c7b9a
New MI front-end for the Cirrus Logic CD240[01] Multi-protocol
...
Communications Controller.
This is still a work in progress, but it is functional enough to
be usable.
1999-02-13 17:05:19 +00:00
70b91539e9
Restructure the interrupt handler and 1-second timer a bit, and tidy up
...
the lazy-transmit-interrupt logic, fixing a few minor logic problems.
Now unable to reproduce the lockup problem described in PR #6767 . Changing
PR's state to "feedback".
1999-02-13 02:12:59 +00:00
960dfa5227
oops - forgot to convert the trivial case (ASCII) to "match levels"
1999-02-12 15:49:43 +00:00
525932e022
make the probe stricter to catch cases where the chipset doesn't pull
...
the data lines to "high" for not-existant devices
1999-02-12 12:45:48 +00:00
b515442160
Display the danish o-slash as phi/Theta as proposed by
...
Soren S. Jorvang <soren@t.dk>, with a lower match level.
Display the other accented characters which are not present in the IBM
character set by their non-accented equivalents, with an even lower
match level.
1999-02-12 11:32:50 +00:00
dbdaf91650
change the "mapchar" interface to return a "quality" or "match level"
...
arguments which allows to find approximations for characters which are
not present in a font
1999-02-12 11:25:23 +00:00
2414f4ac80
"NEXT" is a keyboard type, not a keymap variation.
1999-02-12 11:14:49 +00:00
e8823cc3f3
Cleanup of the EPIC/100 driver I did while hacking on the Rhine driver:
...
* Macroize hardware and software descriptor access (much easier to read).
* Simplify and optimize the transmit loop a bit, and use IFF_OACTIVE as
appropriate.
* Fix a potential race condition in the transmit loop. This change has
made the driver significantly more stable (almost completely eliminated
the "device timeout" errors that have plagued this driver).
* Implement transmit interrupt pacing.
* Add missing bus_dmamap_sync() calls (on transmit and receive descriptors
and fraglists). (Draining the write buffer when accessing these structures
may have also contributed to the increased stability of this driver on
the Alpha.)
1999-02-12 05:55:27 +00:00
873e1d2a51
Fix printf format problems on Alpha.
1999-02-12 01:51:37 +00:00
mycroft