5e275d7012
Clear the DMA pointer reload interrupt bits in the IOASIC_INTR
...
register to prevent interrups from looping on the Alpha.
From Izumi Tsutsui <tsutsui@ceres.dti.ne.jp>.
2000-07-17 17:43:16 +00:00
ec726f07ca
Kill typos in interrupt code.
2000-07-17 17:06:00 +00:00
0eb897823b
There is no music device - g.c. its cdev_decl.
2000-07-17 16:57:19 +00:00
71ccd6200d
Add (but commented) COMPAT_PECOFF entry.
2000-07-17 14:37:53 +00:00
966115ff9e
probeget: do the same song and dance as ld*a() macros in ctlreg.h do.
2000-07-17 14:08:43 +00:00
3aacf9101a
Regen.
2000-07-17 13:07:21 +00:00
82b491eecc
Some more products (from FreeBSD).
2000-07-17 13:06:54 +00:00
efabca31b5
Make memcpy() the favored interface an swizzle the args for ovbcopy. Also
...
move bcopy XLEAF here from locore.S. For 64b clean compilation add a
ld/sd section to the block copy.
2000-07-17 07:37:50 +00:00
2fd0d88f44
Use <uvm/uvm_extern.h> instead of vm/vm.h
2000-07-17 07:06:13 +00:00
116a6f8233
Pull in geocast mips ddb improvements and start bringing in kgdb support.
...
Add ddb support for QED opcodes, fill in enough routines so "next" usually
works, kdbpoke support for any size. Add callback that ports can hook when
entering and leaving ddb. This can be used for things like turning
off watchdogs while in ddb.
2000-07-17 07:04:19 +00:00
fc1ba82306
Make this compile again: restore missing prototype.
2000-07-17 06:53:42 +00:00
d63c5d05ce
Catch up with d_mmap parameter change. From Steve Peurifoy via PR #10603 .
2000-07-17 06:52:31 +00:00
b4f5693f98
Repair format type mismatch in DEBUG code. From Steve Peurifoy via PR #10603 .
2000-07-17 06:51:18 +00:00
196f358a96
Correct return type of grfaddr(). From Steve Peurifoy via PR #10603 .
2000-07-17 06:50:32 +00:00
5edc9ef4a4
When computing the segment size, consider the maximum segment
...
size in the DMA map.
2000-07-17 04:47:56 +00:00
8746b7c870
- Write the registers 7930 registers properly on the Alpha (it's
...
different than on the DECstation).
- Use IOASIC_DMA_BLOCKSIZE instead of PAGE_SIZE.
Should make this work on the Alpha. From discussion with
Izumi Tsutsui, Gregory McGarry, and Chris Demetriou, and
much reading of EK-D3SYS-PM.
2000-07-17 04:37:27 +00:00
9496825ae2
Define an auto variable ``cp'', which is used to scan the global variable
...
``version'', as const char * instead of char * to prevent compiler warning.
2000-07-17 04:04:02 +00:00
f96915efa5
Changes so that the kernel can be compiled under __ELF__.
2000-07-17 02:54:04 +00:00
5d9fda1ecd
switch size_t, ptrdiff_t, & ssize_t to long int (signed or unsigned) for
...
__ELF__.
2000-07-17 02:52:24 +00:00
887bebaa71
Define IOASIC_DMA_BLOCKSIZE (4096 bytes).
2000-07-17 02:18:17 +00:00
8623daff6d
G/c some unused (and incorrect, for our usage) definitions.
2000-07-17 02:17:13 +00:00
95f72dd4aa
Use the IOASIC_DMA_ADDR() macro now that it is fixed.
2000-07-17 01:29:02 +00:00
cd6fa19644
Make sure to get the upper 5 bits of the page address mixed in
...
in IOASIC_DMA_ADDR(), as the le_ioasic attachment does. Noted
by Gregory McGarry.
2000-07-17 01:28:16 +00:00
77c0fe57cf
convert to use version template and newvers_stand.sh script for generating
...
bootblock revision strings, use bootbock_name[] (i.e. "NetBSD/sun3")
in initial bootblock messages instead of just "NetBSD"
while here, do sligh Makefile cleanup to share more code between them and also
to make buildable on NetBSD 1.4.1 (my test compile system)
get rid of the XX define hack for netboot & ufsboot, build xxboot.c as
part of libsa - previos main() was renamed to xxboot_main(), main()
is now in respective conf.c files and calls xxboot_main() with
appropriate name of boot block type
XXX I had no chance to actually test the resulting bootblocks, but the
changes were fairly streightforward and should no influence functionality of
boot code
2000-07-16 21:56:12 +00:00
57e3691758
Don't wait for B_READ buffers to finish in vfs_shutdown, it makes no sense
...
to do so.
From Ethan Solomita.
2000-07-16 21:07:24 +00:00
114bb7f9d9
If card is in power state D3 put it into power state D0 so that it will
...
at least work after the next reboot.
2000-07-16 20:18:48 +00:00
d9151a2dc8
Add a uuencoded tokenised BASIC version of BBBB, since it can't yet be
...
generated without RISC OS.
2000-07-16 12:54:04 +00:00
87dbab4963
Warn about <8bpp screen modes.
...
Fix a typo in "page in use" message.
2000-07-16 12:46:50 +00:00
5f09b77987
s/IPSEC_IPV6FWD/IPSEC/. this should correct strange behavior on ipv6
...
forwarding (even if policy asks for tunnel mode encryption, packets
go out in clear). sync with kame.
2000-07-16 07:57:55 +00:00
480203ba75
change intptr_t and uintptr_t to long and unsigned long respectively. This
...
is a noop on 32 bit machines, but it makes lint quiet and it is more correct.
2000-07-16 02:18:11 +00:00
a2744a4cf8
do not pull sys/queue.h from netinet6/in6.h. PR10597.
...
some sync with kame.
2000-07-16 01:10:34 +00:00
24c327fe78
Add an option to do case-insensitive lookups even on Rock-Ridge CD-ROMS.
...
Add 'rrcaseins' option to mount_cd9660(8).
This addresses kern/2419 by Jason Downs.
2000-07-15 21:40:42 +00:00
e7d7ef2275
one less - though we don't have 'notrans', we have 'nomaplcase' now
2000-07-15 21:37:50 +00:00
859057e6b3
Fix uninitialized variable (reg) in fxp_pci_confreg_restore();
...
this could result in garbage being written to the PCI status register,
which is unlikely to have had a serious effect. This was with us from
an #if 0 added in rev 1.6.
2000-07-15 21:36:19 +00:00
9feae259a4
Avoid printing duplicate colon when card is waked up.
2000-07-15 20:57:24 +00:00
2890290b0f
Add com* at obio0. (Tadpole & JavaStation)
2000-07-15 19:59:53 +00:00
cfe61a3025
Un-__P'ify kernel prototypes.
2000-07-15 19:59:27 +00:00
1d97a430c4
Enhance this so it support the com port on the JavaStation 1 as well as
...
the tadpole internal modem.
2000-07-15 19:57:03 +00:00
83e844cf03
Add a prototype for netintr()
2000-07-15 19:17:19 +00:00
54ccff0437
define "80x24" screen types for better vt100 compatibility
2000-07-15 18:47:54 +00:00
20305c6623
Fix a typo in the `device_lookup()' changes.
2000-07-15 18:12:42 +00:00
b3b275a389
The install ramdisk has grown somewhat, and now overwrites the
...
`ie' chip's packet buffer... Moving it up to just below the netboot
image (4MB) should leave room for a few more year's bloat. ;-)
2000-07-15 16:04:24 +00:00
eb5863f522
#ifdef BOOT_DEBUG --> BDPRINTF(PDB_BOOT, (...))
2000-07-15 14:26:39 +00:00
61c607b9fe
Improve kernel message when card is in power state D3. Instead of...
...
epic0 at pci0 dev 11 function 0 epic0: unable to wake up from ...
... print this:
epic0 at pci0 dev 11 function 0: unable to wake up from power state D3
2000-07-15 10:32:36 +00:00
498310f5be
Check if card was put into sleep mode using PCI/ACPI power management
...
and try to restart it. This patch based on hints by Jason Thorpe.
2000-07-14 22:00:32 +00:00
1276c517f4
Remove ENOTSUP for the moment. This needs a unique number, as noted by
...
kleink, and there are a few more from SUSv2 that we should have for
completeness anyway--these will be added in the near future.
2000-07-14 21:39:56 +00:00
b141a6bfe8
Merge-o.
2000-07-14 21:09:45 +00:00
4eacbabe76
Make 64-bit stack tracebacks look decent.
2000-07-14 21:07:10 +00:00
6667752114
Move some macro definitions out of genassym and into locore.s
2000-07-14 21:04:16 +00:00
3143adecfb
Tell gcc that stores clobber "memory". Probably makes no difference since
...
they should not be used to access normal memory anyway.
2000-07-14 21:02:11 +00:00
41da794863
Make all the inline functions static.
2000-07-14 21:00:17 +00:00
7b6085ff22
Add support for 64-bit PIC and dynamic linking.
2000-07-14 20:59:07 +00:00
1dfa0ec96d
Use cpu_intr() definition from mips/cpu.h instead of local one.
2000-07-14 18:35:38 +00:00
9d069ade37
Sprinkle some const.
2000-07-14 18:26:46 +00:00
dc4b749234
Fix the status reporting for copybacks. Thanks to Hubert Feyrer for
...
reporting the problem.
2000-07-14 15:26:29 +00:00
9de310aebe
Use per-PBM control/status register addresses provided by the PROM.
...
Print version/implementation info.
2000-07-14 15:13:35 +00:00
04fe9636ba
Provide details on the `psy_csr' register.
2000-07-14 15:09:51 +00:00
8258c0e780
Fix padding in struct pci_ctl.
2000-07-14 13:17:12 +00:00
e5a9cce870
Cast physmem to u_int64_t before applying ctob().
2000-07-14 13:15:44 +00:00
9067306192
Don't use *(unsigned int *)data to get the signal number out; this will
...
fail on LP64-BE systems. Also, fix up the invalid signal number check.
2000-07-14 12:10:58 +00:00
d8205b6db1
Do a dummy read after writing through the memory access pipeline, to flush
...
it, before starting the command to install the multicast list.
(We did it right for writing data packets, but failed here.)
Without this, the last multicast address installed won't be made active.
2000-07-14 10:50:50 +00:00
68edef1bf6
Back out previous for now; it requires a system wide prototype change.
2000-07-14 09:58:52 +00:00
2d699aa6ce
Change some comment formatting.
2000-07-14 08:21:14 +00:00
0688add8e8
Take care of prototype changes for console probe and console getc.
2000-07-14 08:18:49 +00:00
ceafcbd834
apply Kenji Aoyama <aoyama@nk.mcu.or.jp>'s patch
...
on port-hpcmips-ja@jp.netbsd.org Mon, 10 Jul 2000 21:21:47 +0900
FIX:
Can't read CIS tuple chain:some TDK CF Flash memory card.
2000-07-14 08:02:12 +00:00
b221909e32
Sprinkle some const.
2000-07-14 07:21:50 +00:00
195bf5c09f
- Fix the likely cause of the "ps(1) hangs machine" problem. Always
...
vslock the user pages for the data being copied out to userspace,
so that we won't sleep while holding a lock in case we need to
fault the pages in.
- Sprinkle some const and ANSI'ify some things while here.
2000-07-14 07:21:21 +00:00
8fd9032b90
ANSI'ify.
2000-07-14 07:14:33 +00:00
424346ba85
Const'ify string constants.
2000-07-14 07:14:03 +00:00
ba40fcada3
Sprinkle in some const.
2000-07-14 07:12:47 +00:00
500013914e
Make timebase frequency value adjustable.
2000-07-14 05:53:31 +00:00
69e557a91c
Add _XOPEN_SOURCE protections. The need for these is questionable, advised
...
by kleink about the E* predefined namespace; we'll look into that.
Also add ENOTSUP from SUSv2 as an alias for EOPNOTSUPP. It's used by the
SUSv2 pthreads interface, has the same meaning, and pthreads does not use
EOPNOTSUPP.
2000-07-14 00:52:02 +00:00
c32ffb8447
Make `physmem' an `unsigned int', so it can properly represent large memory
...
configurations.
2000-07-14 00:02:35 +00:00
5942ac860b
switch to sys/conf/newvers_stand.sh for generating vers.c
2000-07-13 22:25:14 +00:00
9c15bcabda
switch to sys/conf/newvers_stand.sh for generating vers.c
...
sync comments in */version with i386
2000-07-13 22:18:12 +00:00
f6330c6500
switch to sys/conf/newvers_stand.sh for generating vers.c
...
sync comments in */version with i386
add a hack to ${PROG} target so that symlinks machine, pmax, mips are
created properly even when building on NetBSD/pmax 1.4.1
2000-07-13 22:18:08 +00:00
432831b01b
add couple of flags which can be used to avoid generating some of the
...
information.
Put standard TNF copyright in, since this file no longer uses the old code.
2000-07-13 22:04:44 +00:00
1fa850b0ef
config file for Dreamcast
2000-07-13 18:11:53 +00:00
e527d66d55
Fix mem_no. Pointed out by cgd.
2000-07-13 18:10:38 +00:00
e633c4ca18
don't initialize BSC when BSC is already initialized (e.g. Dreamcast)
2000-07-13 18:02:10 +00:00
ca051b5fb3
fix some obvious paste errors in 'uk' cdev inits
2000-07-13 17:40:34 +00:00
75159452f1
Sync w/ kern_time.c and sys_generic.c
2000-07-13 17:39:03 +00:00
f9ba0345f1
XXX Use of hzto() return value needs to be double-checked here.
2000-07-13 17:35:03 +00:00
c55e09bd44
Add a comment about the hzto() return value.
2000-07-13 17:32:06 +00:00
c0c8481a2a
New hzto() function from FreeBSD and Artur Grabowski <art@stacken.kth.se>.
...
Stops sleeps from returning early (by up to a clock tick), and return 0
ticks for timeouts that should happen now or in the past.
Returning 0 is different from the legacy hzto() interface, and callers
need to check for it.
2000-07-13 17:06:15 +00:00
9da8631e2b
printf() format for 64-bit integers `tf_pc' and `tf_npc'.
2000-07-13 16:44:03 +00:00
b10a1b69be
Add a KERN_CONSDEV sysctl that returns cn_tab->cn_dev (if cn_tab is not
...
NULL).
2000-07-13 14:26:43 +00:00
20964b0c23
fatal bug fix from kame (rtentry refcnt goes negative if we play with IPv6
...
address/routing table too much).
in6_ifloop_request()
not to request rtrequest to return an rtentry except for the ADD
operation, in order to avoid misdecreasing the refcnt (which might
cause leak of rtentry)
2000-07-13 09:56:20 +00:00
c9f691d778
Correct omissions inadvertantly introduced when the non-debug
...
version (macro) was updated in exec.h.
2000-07-13 09:34:23 +00:00
ef9531850e
Add comment that overriding the sysctl defines in machine/cpu.h
...
breaks userland binary compatiabiltiy between mips ports. Move
check down so common values are always defined here.
2000-07-13 07:37:11 +00:00
c0f74e1bda
remove memreg.h.
2000-07-13 06:30:16 +00:00
22820972ac
remove vaddrs.h
2000-07-13 06:25:55 +00:00
81ec8bef47
remove old (bogus) comment.
2000-07-13 06:23:07 +00:00
3eedcb3009
Whitespace police.
2000-07-13 05:47:39 +00:00
d5a1bec37e
bump some system values.
2000-07-13 05:40:51 +00:00
f5211e847a
remove m_pulldown statistics code. it is highly experimental and belong
...
to kame tree only (not for *bsd).
2000-07-13 05:34:21 +00:00
cb551c438d
Reflect the new reality.
2000-07-13 03:18:22 +00:00
841f05f1b2
Use <machine/asm.h>
2000-07-13 03:17:21 +00:00
20b3698aee
Include libkern.h
2000-07-13 03:13:40 +00:00
98ffc615b2
Use <machine/asm.h>. (e.g. prepare for ELF)
2000-07-13 03:13:05 +00:00
b4c1bfd1f3
modify load_file to load at relative vms'a as specified in the phdr's.
2000-07-13 02:35:25 +00:00
84bbae583c
remove a debugging printf.
2000-07-13 02:33:36 +00:00
ccb90e6fe9
When select(2)/poll(2) is awakened by a collision, recalculate the
...
timeout value for tsleep(). From Artur Grabowski <art@stacken.kth.se>.
2000-07-13 01:32:33 +00:00
81ce10aa1f
Extend the vmcmd stuff a bit. Add a flags field and define
...
VMCMD_BASE & VMCMD_RELATIVE. This allows one to add vmcmds
which are relative to previous entries. This is needed for
loading the VAX ld.elf_so
2000-07-13 01:24:04 +00:00
c675def443
Update comment.
2000-07-12 23:14:09 +00:00
5cae63e123
NetBSD -> __NetBSD__ in an #ifdef, and nuke sc_bpf; there's one in
...
the ifnet already.
2000-07-12 23:02:38 +00:00
1a82fc879b
Regen.
2000-07-12 22:59:54 +00:00
16a4fd2bff
Add DEC DE422 Ethernet.
2000-07-12 22:59:23 +00:00
c0708e9ff1
Clean up bios_reg a little, and add support for accessing
...
the byte variants of the registers (e.g. %ah, %al, etc.).
2000-07-12 22:58:12 +00:00
b46e691b98
make bootprog_* const (pointed by Simon Burge)
2000-07-12 22:19:57 +00:00
7e8f67ad97
No need to fetch the psycho's own registers as thet are already passed
...
down from the parent bus. Also account for the difference in `reg'
properties in psycho vs sabre chips.
2000-07-12 21:49:44 +00:00
b2a5b02fc9
Fix a couple of LP64 problems (long -> int32_t).
2000-07-12 21:15:33 +00:00
f56554a578
If there is no "interrupt-map" property on the ebus node, assume the
...
child "interrupt" properties are already in a format suitable for
the parent bus.
2000-07-12 21:07:36 +00:00
c8f528ad5e
switch to MI newvers_stand.sh version info generator
2000-07-12 21:05:35 +00:00
1204c1faaf
Oops, treat 2100A_A500 just like 2100_A500 in every place necessary.
2000-07-12 21:02:14 +00:00
aee8c6a2e9
new MI bootblock versioning helper for generating vers.c,
...
intended to replace all the various port's stand/*/newvers.sh scripts
architectures will be switched to this gradually as tested
2000-07-12 20:57:42 +00:00
3182af4432
- Add Jensen support/devices.
...
- Add commented-out Sable/Lynx support/devices.
- Switch from `ncr' to `siop' by default.
- Add some missing `scsibus' configs to INSTALL.
2000-07-12 20:54:38 +00:00
249773b538
Deal with another odd need of the Sable/Lynx systems, which need to
...
have an ISA chipset present before the PCI-EISA bridge has been
attached (because the STDIO module has an ISA DMA-using device,
the floppy controller, connected to it).
2000-07-12 20:50:00 +00:00
a66c3e663c
Code to support the DEC 2000/300 (DECpc AXP 150, a.k.a. "Jensen")
...
systems. Thanks to Gyenes Istvan for the rounds of testing.
2000-07-12 20:36:07 +00:00
55c41121ff
Change from `ncr' to `siop' by default.
2000-07-12 20:27:25 +00:00
42c89508c0
Uncomment the `fdc at sableio' lines.
2000-07-12 20:20:54 +00:00
1f45545899
Add UltraSPARC III specific flag bit. Currently ignored.
2000-07-11 21:55:11 +00:00
dc6054c8b0
add OBJCOPY?=objcopy
2000-07-11 18:47:09 +00:00
dafe13f724
callout()->callout_reset()
2000-07-11 18:46:22 +00:00
dd44125396
Remove unused variable.
2000-07-11 16:08:15 +00:00
6c4d97da13
Indicate WEP capability to association request when WEP is enabled.
...
Without this fix, some (IEEE802.11 conformant) APs will send data to this
station without using WEP.
2000-07-11 12:54:00 +00:00
f6812b853b
Only define machdep sysctls if CPU_MAXID is not defined by machine/cpu.h.
...
This lets mips ports have additional machdep sysctl. Define CPUISMIPS3
for MIPS1+MIPS2 as cpu_arch >= 3 to support mips4. Add cpu_intr()
prototype so this is defined in one place.
2000-07-11 06:34:57 +00:00
6b28794054
Add support for 3 QED special2 opcodes.
2000-07-11 06:27:58 +00:00
54a85cb3af
For 64b clean 32b compilation, do not bother setting SX And KX.
...
The current code does not maintain these in SR, and they are not
needed by 32b kernel code for mips3/4 instructions.
2000-07-11 06:26:08 +00:00
a5eeea36d4
Add back a failure return statement in check_header() which I accidently
...
deleted in rev. 1.46; pointed out by Chris Demetriou.
2000-07-11 06:23:38 +00:00
4f051180a0
- Use PMAD-BA name for device match logic. It's not a real TURBOchannel
...
device and the id string is not found in option ROM string, but
ULTRIX/OSF1 call it so anyway.
- Squash IOASIC DMA buffer allocation into device attach() sequence.
2000-07-11 04:10:25 +00:00
77e30d85bf
Oops.
2000-07-11 01:15:47 +00:00
e3c19eafd0
Update comment.
2000-07-11 01:02:44 +00:00
dcbf69bf94
Update mips3_locore_vec cache functions for mips3_L1TwoWayCache. Add cast
...
for clean compilation with _MIPS_BSD_API_LP32_64CLEAN set.
2000-07-10 23:21:16 +00:00
f7d523ebb6
make buildable with -Wall -Werror
2000-07-10 22:48:25 +00:00
b3c2dd691c
make compilable with -Wall -Werror
2000-07-10 22:01:16 +00:00
42c88111e1
explicitly specify main() return type (make buildable with
...
-Wall -Werror)
2000-07-10 21:30:31 +00:00
010c198b37
In setregs() flush sigreturn trampoline code from the d (MIPS3) and i cache.
...
Tested on geocast RM5231 platform. This fixes a race in
regress/sys/kern/sigtramp. Some other ports do the same thing.
2000-07-10 21:12:13 +00:00
27a5ba9e0a
use <sys/exec_aout.h> instead of <a.out.h> - this is supposed
...
to be standalone after all
2000-07-10 20:36:15 +00:00
7e272173bd
no need to include <a.out.h> here
2000-07-10 20:33:49 +00:00
f10d7699fc
Break into debugger by typing `+++++',
2000-07-10 20:24:23 +00:00
b71bddab49
Regen.
2000-07-10 16:32:07 +00:00
e8ebb2a377
use mips3 cache op.
...
invalidate -> write-back invalidate
(although NetBSD/hpcmips run on write-through mode.)
suggested by cgd.
2000-07-10 16:23:18 +00:00
5a5452c95d
Add ICP Vortex RAID controllers.
2000-07-10 16:14:02 +00:00
b99e56173c
do not allow non-priviledged user to change nwid via ifconfig.
2000-07-10 14:36:17 +00:00
0de5b6e260
these don't need <uvm/uvm_extern.h> at all, actually.
2000-07-10 13:54:54 +00:00
5b2b68bb7a
fix a cast for sparc64.
2000-07-10 13:37:00 +00:00
c2ed037f55
move associated/synced/no-recent-beacons messages to IFF_DEBUG.
2000-07-10 12:32:53 +00:00
c71d0f69c6
Forgot a debug printf.
2000-07-10 10:45:21 +00:00
5ae755e1bf
Save registers for eventually later usage.
...
Use REI to clear pipes after code copy.
2000-07-10 10:42:27 +00:00
baec928850
NODESIZE -> BI_NODESIZE.
2000-07-10 10:40:38 +00:00
ed83213bf2
Add support for VAX 6000 + VAX 8000. Tweak console routines.
...
Create a fake RPB if either netbooted (on machine without RPB) or
loaded from console storage (without VMB intervention).
2000-07-10 10:38:23 +00:00
175e6ad859
Add code that allows the boot blocks to be loaded by VMB.EXE, and
...
also have optional MTPR printf available.
2000-07-10 09:55:36 +00:00
ab492849bc
implement net.inet.icmp.errppslimit.
...
make default value for net.inet.icmp.erratelimit to 0, as < 10ms value
does not do the right thing.
2000-07-10 09:31:29 +00:00
8658157274
Nexus vector number is 0x14-0x17, not 14-17! Fortunately, 3 wrong did
...
one right. Pointed out by Kenn Humborg (kenn@linux.ie ).
2000-07-10 09:14:32 +00:00
7403ef3d00
Need to include <sys/exec_elf.h> to make things happy. So much for adding
...
dead code.
2000-07-10 01:15:17 +00:00
048f1387db
Function signature for bus_intr_establish() changed.
2000-07-10 01:11:14 +00:00
3acffdb4a5
Update TODO list item #7 .
2000-07-10 00:50:22 +00:00
1cfb5e6456
Grab and use the memory model info from the flags in the ELF header.
2000-07-09 22:39:17 +00:00
469c88cc11
Clarify that the RX5C47X requires writes to the PCI_LEGACY to
...
disable and not PCI_BCR_INTR; this is what rev 1.9 did under
the label of "Maintenance."
2000-07-09 22:06:02 +00:00
ec71379542
Use TSO memory model for 32-bit userland.
2000-07-09 22:02:32 +00:00
e5cd515b89
Upgrate interrupt handling:
...
1) use interrupt vectors for specific zs chips rather than polling
all of them.
2) use softintr_schedule() and schedule it for a particular device
rather than poll all devices.
2000-07-09 21:58:43 +00:00
e6e9cc5c41
Move legacy pcic-mode disabling code from pccbb_chipinit() to
...
pccbbattach(). This is necessary as pccbb_chipinit() is deferred, and
may not run until after the pcic is already attached.
Now pcics are properly disabled on Sony VAIO, f'rinstance.
2000-07-09 21:58:30 +00:00
f43ab74a43
Shuffle around some fields to waste less space on LP64.
2000-07-09 21:55:24 +00:00
406e0f779f
Add a `device class' interrupt level argument (from machine/intr.h)
...
to bus_interrupt_establish().
It's currently only used in sparc64/dev/psycho.c to assign a CPU interrupt
level to devices in PCI slots.
2000-07-09 20:57:41 +00:00
2a57393a0f
Re-arrange headers; drop <machine/cpu.h>.
2000-07-09 20:38:34 +00:00
230b3462ea
uncomment part which has been accidentaly commented out in last commit
2000-07-09 14:16:02 +00:00
84fe4f536c
Comment police. s/DIAGNOSTICS/DIAGNOSTIC/
2000-07-09 14:13:04 +00:00
f61c58e333
fix accidentaly dropped dependance on wrtvid
2000-07-09 14:11:10 +00:00
0b9b0cbc03
backout previous change, this should not have been committed (yet)
2000-07-09 14:07:06 +00:00
26e11b6af2
Make buildable on NetBSD/mvme68k 1.4.1.
2000-07-09 13:47:33 +00:00
d132b13d89
regen
2000-07-09 13:40:20 +00:00
8f9515257a
- massive warning fix fest.
...
- fix pread/pwrite return values (plus some other syscalls that looked
similarly broken).
- prototypes and clean up for netbsd32_ioctl.c
now getpw*() works under compat32!
2000-07-09 13:39:31 +00:00
152f5c5f28
remove unused variable.
2000-07-09 13:35:54 +00:00
8a661b9beb
be more cautious about tcp option length field. drop bogus ones earlier.
...
not sure if there is a real threat or not, but it seems that there's
possibility for overrun/underrun (like non-NOP option with optlen > cnt).
2000-07-09 12:49:08 +00:00
f6cf4e5f93
move struct sys_config from mca_machdep.c to mca_machdep.h
...
fix copyright (overlooked in original commit)
use bitmask_snprintf() instead of printf("...%b") (though that part is commented
out anyway ATM)
2000-07-09 10:35:11 +00:00
1566e57da8
Simplify address decode logic for memory parity error condition.
...
XXX Need to have a better reporting message here.
2000-07-09 09:14:29 +00:00
3c55597b94
Add a patchwork prototype declaration for netintr().
2000-07-09 08:08:20 +00:00
194f2ce04e
Comment clarification in this file. Have consistent terminology, ATC
...
instead of TLB.
2000-07-09 07:14:18 +00:00
d8a9a3cc7b
add ppsratelimit(9), which does event-per-sec rate limitation.
...
use it from icmp6 error rate limitation code.
XXX better name for the function?
2000-07-09 06:44:57 +00:00
8f3d56a298
shorten splclock() period in ratelimit().
...
From: onoe
2000-07-09 06:40:08 +00:00
18c0283349
look in /emul/netbsd32 for __stat13() and __lstat13().
2000-07-09 03:03:35 +00:00
d621cc4cb0
Add missing newlines in some messages.
...
Set Vpp the same as Vcc by default. We need to do more with voltage sense.
2000-07-09 01:55:18 +00:00
39ff4faf53
Fix compiler warning.
2000-07-09 01:52:17 +00:00
9ad7bd8d37
Increase the example DDB_HISTORY_SIZE.
2000-07-09 01:36:06 +00:00
33090b8b89
Enable DDB history.
2000-07-09 01:35:52 +00:00
caf07dfa04
When unmounting, make sure to free the syncer vnode so that it can be reused.
2000-07-09 00:59:03 +00:00
bd8f07c394
Recognize the i82559ER.
2000-07-09 00:46:26 +00:00
5cdb782283
Regen.
2000-07-09 00:45:56 +00:00
9d0e35cc63
Add ID for i82559ER.
2000-07-09 00:45:14 +00:00
4087b4e418
Do the interrupt fixup for all busses, not just bus 0.
...
This is necessary on some machines with multiple onboard PCI busses.
2000-07-09 00:42:47 +00:00
0ef0f52d06
Turn on DDB history by default.
2000-07-09 00:41:24 +00:00
74e5e4f040
Fix for:
...
7. Numbers starting with [a-f] should work, but symbols
of the same name should have priority.
2000-07-08 21:35:32 +00:00
5a7cb20576
gdb requires a `struct fpstate' so provide one.
2000-07-08 19:25:14 +00:00
dcf6e7b09e
When receiving an rx interrupt on a closed or unconfigured port, read
...
the data out of the board anyway so it won't re-interrupt anyway.
Fix tested by C Kane <ckane@best.com>
2000-07-08 18:36:02 +00:00
d5906caa54
Format paranoia
2000-07-08 18:11:02 +00:00
bb22022c59
Format paranoia.
2000-07-08 18:10:25 +00:00
4eec028c2a
More format checking
2000-07-08 17:45:53 +00:00
e292542bce
More format attributes
2000-07-08 17:36:01 +00:00
ed9ce99d8c
printf format paranoia
2000-07-08 17:12:08 +00:00
thorpej