739cb75837
Add definitions of C99 specified-width integer type limits.
...
XXX Fastest minimum-width integer types haven't been decided upon yet.
2001-04-15 15:29:02 +00:00
cdcf9f46c5
Add definitions of C99 integer constant macros.
...
Tidy Makefiles up a little.
2001-04-14 22:46:19 +00:00
a7c20e5788
Add definitions of C99 integer constant macros.
2001-04-14 22:38:33 +00:00
7affdab52e
Add definitions of C99 minimum-width and greatest-width integer types.
...
XXX Fastest minimum-width integer types haven't been decided upon yet.
2001-04-14 12:19:49 +00:00
bf2dcec4f5
Remove the use of splimp() from the NetBSD kernel. splnet()
...
and only splnet() is allowed for the protection of data structures
used by network devices.
2001-04-13 23:29:55 +00:00
ba0a86fa22
There are no level1 or level7 interrupts possible on the Milan...
2001-04-12 09:09:56 +00:00
8507fcec54
Update these for Milan addresses.
2001-04-12 07:17:30 +00:00
3f7694f804
Adapt these for use on the Milan.
2001-04-11 14:45:07 +00:00
247d880fc9
The Milan uses the U0 pin to switch the pci-bridge between little & big
...
endian mode. That's why I moved the 'wired' flag to U1.
2001-04-10 19:51:00 +00:00
dcc1c6a9fb
Take NFDISA into account.
2001-04-10 19:36:20 +00:00
dc0e725f9d
full[tc]flush from GLOBAL -> ASLOCAL.
2001-04-10 13:59:10 +00:00
3e3afaaac3
Regen. again...
2001-04-10 07:03:49 +00:00
e3d2d361fd
The Hades also uses the TT030 like SCSI driver. Remove 'mouse' here...
2001-04-10 06:46:01 +00:00
2d38da2932
Initial MILAN generic config
2001-04-10 06:39:36 +00:00
e409b5d5df
Regen.
2001-04-10 06:39:10 +00:00
99047718f0
fdisa needs-flag...
2001-04-10 06:37:08 +00:00
30f5357c6e
Move dma.c away from the mainbus floppy and make it a separate entity with
...
tag 'mbdma'.
2001-04-10 06:36:08 +00:00
e159fdc910
files.atari:
...
Defopt motherboard type and make ym2149.c dependend on 'standard' atari
boards.
Configfiles:
Add pseudo device mouse. It got dropped in the moves by accident.
2001-04-10 06:28:38 +00:00
dfaa29355b
Add a config file for the Milan. Note that you cannot build a working Milan
...
kernel yet. There are still quite some bits missing in the repository.
2001-04-10 05:56:25 +00:00
1e08d983e3
Move GENERIC to GENERIC.in . This avoids confusion since GENERIC is not a
...
standalone config file anymore.
2001-04-10 05:52:14 +00:00
adc78de568
Regen.
2001-04-06 21:55:11 +00:00
54d70d6eef
Add a 'ser0' device to all. Add ne2000, 3Com 3c59x/3c90x and ESS Solo-1
...
support to the Hades.
2001-04-06 21:53:39 +00:00
1324cab42e
And commit the generated files.
2001-04-05 12:25:15 +00:00
6b22a0776c
Forgot this in previous commit.
2001-04-05 12:22:10 +00:00
fb0acfc293
Major overhaul in the config files. The idea is to have the major part of
...
the generic options in GENERIC instead of duplicated all over the place.
To generate a config file, run 'makeconf'. This script uses cpp to combine
a '.in' file and GENERIC to a real config file.
2001-04-05 12:21:30 +00:00
ad8c9f3a7e
Wcd attacment code for the Milan. The Milan has the standard dual IDE port
...
hardware. A Milan specific attachment is needed to modify the iot so that
the streaming methods do a byteswap.
Configure like:
wdcisa0 at isa? port 0x1f0 irq 14
wdcisa1 at isa? port 0x170 irq 15
2001-03-31 20:24:10 +00:00
a054ccd1d4
Add a tag to the fdcisa.c and isa/fd.c files. So they won't be used
...
unnecessary (and cause trouble).
2001-03-31 20:13:19 +00:00
20ba07f2fe
- add dev_noimpl(xxx,yyy) macro to replace "(dev_type_xxx((*))) yyy",
...
and use appropriately
- create more helper macros:
. cdev__xyz_init(c,n), such as cdev__ocri_init() for
/* open, close, read, ioctl */, etc.
. cdev__xRy_init(c,n), where nullop is used instead of enodev to dummy out
method `R' and the comments now read /* xxx (read) yyy */ instead
. cdev__xyz_t_init(c,n,t) - as per cdev__xyz_init, but sets d_type = t
as well
- use seltrue instead of dev_noimpl(poll,*), as (IIRC) cdevsw.d_poll should
always DTRT WRT returning a valid result. (a few devices previously
incorrectly returned ENODEV)
- use dev_noimpl(stop,enodev) instead of dev_noimpl(stop,nullop) if tty
== 0, because it doesn't matter if dev_type_stop isn't implemented in that
case, and it allows the use of the cdev__xyz_init macros. certain ports
(sparc,sparc64,x68k) used the nullop method for dev_type_stop in a few
drivers, whereas everything else uses enodev
- ensure that the comments are accurate WRT the behaviour of a given entry
2001-03-26 12:33:22 +00:00
723cd818d8
move duplicate definitions for:
...
pc, lpt, joy, ocis, apm, satlink, i4bctl, i4brbch, i4btel, i4btrc, i4b
from the port-specific arch/*/*/conf.c files into sys/conf.h
2001-03-21 22:25:52 +00:00
912c115675
s/vm_page_alloc_memory/uvm_pglistalloc/ in panic message.
2001-03-21 18:40:28 +00:00
14d2d5706f
Conditionalize inclusion of the interrupt handlers for 'kbd', 'zs' and
...
'ncrscsi' since they are not present on the Milan.
2001-03-17 20:56:31 +00:00
a5fdf3f1cf
Atari specific stuff to implement the Milan floppy. The Milan uses standard
...
ISA floppy hardware. Configure as:
fdcisa0 at isa? port 0x3f0 irq 6 drq 2
2001-03-16 21:31:55 +00:00
ac3bc537bd
eliminate the KERN_* error codes in favor of the traditional E* codes.
...
the mapping is:
KERN_SUCCESS 0
KERN_INVALID_ADDRESS EFAULT
KERN_PROTECTION_FAILURE EACCES
KERN_NO_SPACE ENOMEM
KERN_INVALID_ARGUMENT EINVAL
KERN_FAILURE various, mostly turn into KASSERTs
KERN_RESOURCE_SHORTAGE ENOMEM
KERN_NOT_RECEIVER <unused>
KERN_NO_ACCESS <unused>
KERN_PAGES_LOCKED <unused>
2001-03-15 06:10:32 +00:00
b44e732ff6
Expand bus_dma implementation. It will now handle the bounce buffer
...
extensions needed to make the isa floppy driver on the Milan work.
2001-03-09 20:55:46 +00:00
2c4c690f14
Add the BUS_DMA_STREAMING flag.
2001-03-07 22:42:16 +00:00
d22da292a6
Man page moved to share/man/man8/man8.atari.
2001-03-04 20:54:12 +00:00
b8c15cce4e
Man page is now in share/man/man8/man8.atari.
2001-03-04 20:51:51 +00:00
df594988e2
Add enhancements :
...
boot sector and bad sector list are preserved by default, use 'z' to change
type NNNm to make a partition size NNN megabytes
type `-N' at `root' and `start' prompts to start after partition N
type `-N' at `size' prompt to end before partition N
type `-1' at `size' prompt to end at end of disk
display pauses if 10 or more partitions to display
2001-03-04 20:49:27 +00:00
8a32449594
Make sure root sector checksum is invalid if we clear it.
...
Set size of XGM partitions on auxilliary roots correctly.
From Leo Weppelman.
2001-02-25 14:33:19 +00:00
b2b6b2d9f7
Include <stdio.h> when built with -DDEBUG.
2001-02-25 14:32:59 +00:00
4a4d440928
Root sector checksums are not always valid, so ignore them.
...
From Leo Weppelman.
2001-02-25 14:32:20 +00:00
5c57e3ce2c
Make it easier to build with -DDEBUG.
2001-02-25 14:31:53 +00:00
8f10488c29
Prepare assembly parts for an eventual transition to ELF. Mostly from a
...
diff from Steve Woodford.
2001-02-09 21:47:45 +00:00
50c553e643
Announce page-size to the VM-system. Thanks to Izumi Tsutsui for pointing
...
this out.
2001-02-01 21:22:55 +00:00
3d1167e274
Fix fallout from lastest tty changes.
2001-02-01 08:59:45 +00:00
9b569c3abe
No longer update the PAGE_* variables. They have turned into compile time
...
constants.
2001-02-01 08:58:03 +00:00
dcee338286
Fix y2001 problem in the initial read of the RTC.
2001-01-29 08:32:23 +00:00
e58532a4bf
No-op commit to force update to a non-"-kk" revision.
2001-01-18 17:47:58 +00:00
c7f1462f3e
Add machdep file for procfs. Currently only used for linux-style
...
/proc/cpuinfo (only active when procfs is mounted with -o linux).
For ports other than the i386 this currently produces an empty
string.
2001-01-17 00:07:18 +00:00
16090efe76
Let lpmatch recognice the printer.
2001-01-16 21:13:09 +00:00
kleink