- Replace most inline assembly with proper functions. As a side effect
this reduces the size of amd64 GENERIC by about 120kB, and i386 by a
smaller amount. Nearly all of the inlines did something slow, or something
that does not need to be fast.
- Make curcpu() and curlwp functions proper, unless __GNUC__ && _KERNEL.
In that case make them inlines. Makes curlwp LKM and preemption safe.
- Make bus_space and bus_dma more LKM friendly.
- Share a few more files between the ports.
- Other minor changes.
the current battery charge state.
$ envstat -dacpibat0 -s"acpibat0 charge state"
acpibat0 charge state: NORMAL
$
It will show WARNING, CRITICAL, LOW or NORMAL depending on the
state it is.
I like it better because I get to see the name of the device as it appears
in the DSDT, which sometimes makes sense and that way it's easier to locate
the relevant code when debugging.
E.g.:
PIC (PNP0000) [AT Interrupt Controller] at acpipcib0 not configured
DMAD (PNP0200) [AT DMA Controller] at acpipcib0 not configured
attimer0 at acpipcib0 (TMR, PNP0100): AT Timer
RTC0 (PNP0B00) [AT Real-Time Clock] at acpipcib0 not configured
pckbc0 at acpipcib0 (PS2K, PNP0303): kbd port
acpibat0 at acpi0 (BAT0, PNP0C0A-0): ACPI Battery (Control Method)
- mark (DIS)CHARGERATE as invalid when (DIS)CHARGING so that envstat
doesn't print some weird stats where the system appears to be doing
both
- handle the case when it's doing neither by marking *RATE as invalid
and setting CHARGING to OFF (because we're not charging, even though
we're not discharging)
- fix print_stats to print correct values in those cases, and a real
percentage (i.e., computed against LFCCAPACITY)
(Part 2: drivers)
* Support for detachable sensors.
* Cleaned up the API for simplicity and efficiency.
* Ability to send capacity/critical/warning events to powerd(8).
* Adapted all the code to the new locking order.
* Compatibility with the old envsys API: the ENVSYS_GTREINFO
and ENVSYS_GTREDATA ioctl(2)s are supported.
* Added support for a 'dictionary based communication channel' between
sysmon_power(9) and powerd(8), that means there is no 32 bytes event
size restriction anymore.
* Binary compatibility with old envstat(8) and powerd(8) via COMPAT_40.
* All drivers with the n^2 gtredata bug were fixed, PR kern/36226.
Tested by:
blymn: smsc(4).
bouyer: ipmi(4), mfi(4).
kefren: ug(4).
njoly: viaenv(4), adt7463.c.
riz: owtemp(4).
xtraeme: acpiacad(4), acpibat(4), acpitz(4), aiboost(4), it(4), lm(4).
* dev/ic/ug.c (main code shared by the attachments)
* dev/isa/ug_isa.c (isa attachment)
* dev/acpi/ug_acpi.c (acpi attachment)
That means that ug(4) can now be attached via ACPI.
Thanks to Mihai Chelaru for the good work.
This driver will report values from the Super I/O chip via ACPI.
It should be possible to overclock the system with this driver, but
it's not implemented yet.
All newer ASUS motherboards probably will work with this driver
(device ATK0110).
[juan@nocturno][~]> envstat -r
CPU Temperature: 30.000 degC
MB Temperature: 38.000 degC
Vcore Voltage: 1.240 V
+3.3 Voltage: 3.264 V
+5 Voltage: 4.992 V
+12 Voltage: 12.091 V
CPU FAN Speed: 1454 RPM
[juan@nocturno][~]>
