20964b0c23
fatal bug fix from kame (rtentry refcnt goes negative if we play with IPv6
...
address/routing table too much).
in6_ifloop_request()
not to request rtrequest to return an rtentry except for the ADD
operation, in order to avoid misdecreasing the refcnt (which might
cause leak of rtentry)
2000-07-13 09:56:20 +00:00
c9f691d778
Correct omissions inadvertantly introduced when the non-debug
...
version (macro) was updated in exec.h.
2000-07-13 09:34:23 +00:00
ef9531850e
Add comment that overriding the sysctl defines in machine/cpu.h
...
breaks userland binary compatiabiltiy between mips ports. Move
check down so common values are always defined here.
2000-07-13 07:37:11 +00:00
c0f74e1bda
remove memreg.h.
2000-07-13 06:30:16 +00:00
22820972ac
remove vaddrs.h
2000-07-13 06:25:55 +00:00
81ec8bef47
remove old (bogus) comment.
2000-07-13 06:23:07 +00:00
3eedcb3009
Whitespace police.
2000-07-13 05:47:39 +00:00
d5a1bec37e
bump some system values.
2000-07-13 05:40:51 +00:00
f5211e847a
remove m_pulldown statistics code. it is highly experimental and belong
...
to kame tree only (not for *bsd).
2000-07-13 05:34:21 +00:00
cb551c438d
Reflect the new reality.
2000-07-13 03:18:22 +00:00
841f05f1b2
Use <machine/asm.h>
2000-07-13 03:17:21 +00:00
20b3698aee
Include libkern.h
2000-07-13 03:13:40 +00:00
98ffc615b2
Use <machine/asm.h>. (e.g. prepare for ELF)
2000-07-13 03:13:05 +00:00
b4c1bfd1f3
modify load_file to load at relative vms'a as specified in the phdr's.
2000-07-13 02:35:25 +00:00
84bbae583c
remove a debugging printf.
2000-07-13 02:33:36 +00:00
ccb90e6fe9
When select(2)/poll(2) is awakened by a collision, recalculate the
...
timeout value for tsleep(). From Artur Grabowski <art@stacken.kth.se>.
2000-07-13 01:32:33 +00:00
81ce10aa1f
Extend the vmcmd stuff a bit. Add a flags field and define
...
VMCMD_BASE & VMCMD_RELATIVE. This allows one to add vmcmds
which are relative to previous entries. This is needed for
loading the VAX ld.elf_so
2000-07-13 01:24:04 +00:00
c675def443
Update comment.
2000-07-12 23:14:09 +00:00
5cae63e123
NetBSD -> __NetBSD__ in an #ifdef, and nuke sc_bpf; there's one in
...
the ifnet already.
2000-07-12 23:02:38 +00:00
1a82fc879b
Regen.
2000-07-12 22:59:54 +00:00
16a4fd2bff
Add DEC DE422 Ethernet.
2000-07-12 22:59:23 +00:00
c0708e9ff1
Clean up bios_reg a little, and add support for accessing
...
the byte variants of the registers (e.g. %ah, %al, etc.).
2000-07-12 22:58:12 +00:00
b46e691b98
make bootprog_* const (pointed by Simon Burge)
2000-07-12 22:19:57 +00:00
7e8f67ad97
No need to fetch the psycho's own registers as thet are already passed
...
down from the parent bus. Also account for the difference in `reg'
properties in psycho vs sabre chips.
2000-07-12 21:49:44 +00:00
b2a5b02fc9
Fix a couple of LP64 problems (long -> int32_t).
2000-07-12 21:15:33 +00:00
f56554a578
If there is no "interrupt-map" property on the ebus node, assume the
...
child "interrupt" properties are already in a format suitable for
the parent bus.
2000-07-12 21:07:36 +00:00
c8f528ad5e
switch to MI newvers_stand.sh version info generator
2000-07-12 21:05:35 +00:00
1204c1faaf
Oops, treat 2100A_A500 just like 2100_A500 in every place necessary.
2000-07-12 21:02:14 +00:00
aee8c6a2e9
new MI bootblock versioning helper for generating vers.c,
...
intended to replace all the various port's stand/*/newvers.sh scripts
architectures will be switched to this gradually as tested
2000-07-12 20:57:42 +00:00
3182af4432
- Add Jensen support/devices.
...
- Add commented-out Sable/Lynx support/devices.
- Switch from `ncr' to `siop' by default.
- Add some missing `scsibus' configs to INSTALL.
2000-07-12 20:54:38 +00:00
249773b538
Deal with another odd need of the Sable/Lynx systems, which need to
...
have an ISA chipset present before the PCI-EISA bridge has been
attached (because the STDIO module has an ISA DMA-using device,
the floppy controller, connected to it).
2000-07-12 20:50:00 +00:00
a66c3e663c
Code to support the DEC 2000/300 (DECpc AXP 150, a.k.a. "Jensen")
...
systems. Thanks to Gyenes Istvan for the rounds of testing.
2000-07-12 20:36:07 +00:00
55c41121ff
Change from `ncr' to `siop' by default.
2000-07-12 20:27:25 +00:00
42c89508c0
Uncomment the `fdc at sableio' lines.
2000-07-12 20:20:54 +00:00
1f45545899
Add UltraSPARC III specific flag bit. Currently ignored.
2000-07-11 21:55:11 +00:00
dc6054c8b0
add OBJCOPY?=objcopy
2000-07-11 18:47:09 +00:00
dafe13f724
callout()->callout_reset()
2000-07-11 18:46:22 +00:00
dd44125396
Remove unused variable.
2000-07-11 16:08:15 +00:00
6c4d97da13
Indicate WEP capability to association request when WEP is enabled.
...
Without this fix, some (IEEE802.11 conformant) APs will send data to this
station without using WEP.
2000-07-11 12:54:00 +00:00
f6812b853b
Only define machdep sysctls if CPU_MAXID is not defined by machine/cpu.h.
...
This lets mips ports have additional machdep sysctl. Define CPUISMIPS3
for MIPS1+MIPS2 as cpu_arch >= 3 to support mips4. Add cpu_intr()
prototype so this is defined in one place.
2000-07-11 06:34:57 +00:00
6b28794054
Add support for 3 QED special2 opcodes.
2000-07-11 06:27:58 +00:00
54a85cb3af
For 64b clean 32b compilation, do not bother setting SX And KX.
...
The current code does not maintain these in SR, and they are not
needed by 32b kernel code for mips3/4 instructions.
2000-07-11 06:26:08 +00:00
a5eeea36d4
Add back a failure return statement in check_header() which I accidently
...
deleted in rev. 1.46; pointed out by Chris Demetriou.
2000-07-11 06:23:38 +00:00
4f051180a0
- Use PMAD-BA name for device match logic. It's not a real TURBOchannel
...
device and the id string is not found in option ROM string, but
ULTRIX/OSF1 call it so anyway.
- Squash IOASIC DMA buffer allocation into device attach() sequence.
2000-07-11 04:10:25 +00:00
77e30d85bf
Oops.
2000-07-11 01:15:47 +00:00
e3c19eafd0
Update comment.
2000-07-11 01:02:44 +00:00
dcbf69bf94
Update mips3_locore_vec cache functions for mips3_L1TwoWayCache. Add cast
...
for clean compilation with _MIPS_BSD_API_LP32_64CLEAN set.
2000-07-10 23:21:16 +00:00
f7d523ebb6
make buildable with -Wall -Werror
2000-07-10 22:48:25 +00:00
b3c2dd691c
make compilable with -Wall -Werror
2000-07-10 22:01:16 +00:00
42c88111e1
explicitly specify main() return type (make buildable with
...
-Wall -Werror)
2000-07-10 21:30:31 +00:00
010c198b37
In setregs() flush sigreturn trampoline code from the d (MIPS3) and i cache.
...
Tested on geocast RM5231 platform. This fixes a race in
regress/sys/kern/sigtramp. Some other ports do the same thing.
2000-07-10 21:12:13 +00:00
27a5ba9e0a
use <sys/exec_aout.h> instead of <a.out.h> - this is supposed
...
to be standalone after all
2000-07-10 20:36:15 +00:00
7e272173bd
no need to include <a.out.h> here
2000-07-10 20:33:49 +00:00
f10d7699fc
Break into debugger by typing `+++++',
2000-07-10 20:24:23 +00:00
b71bddab49
Regen.
2000-07-10 16:32:07 +00:00
e8ebb2a377
use mips3 cache op.
...
invalidate -> write-back invalidate
(although NetBSD/hpcmips run on write-through mode.)
suggested by cgd.
2000-07-10 16:23:18 +00:00
5a5452c95d
Add ICP Vortex RAID controllers.
2000-07-10 16:14:02 +00:00
b99e56173c
do not allow non-priviledged user to change nwid via ifconfig.
2000-07-10 14:36:17 +00:00
0de5b6e260
these don't need <uvm/uvm_extern.h> at all, actually.
2000-07-10 13:54:54 +00:00
5b2b68bb7a
fix a cast for sparc64.
2000-07-10 13:37:00 +00:00
c2ed037f55
move associated/synced/no-recent-beacons messages to IFF_DEBUG.
2000-07-10 12:32:53 +00:00
c71d0f69c6
Forgot a debug printf.
2000-07-10 10:45:21 +00:00
5ae755e1bf
Save registers for eventually later usage.
...
Use REI to clear pipes after code copy.
2000-07-10 10:42:27 +00:00
baec928850
NODESIZE -> BI_NODESIZE.
2000-07-10 10:40:38 +00:00
ed83213bf2
Add support for VAX 6000 + VAX 8000. Tweak console routines.
...
Create a fake RPB if either netbooted (on machine without RPB) or
loaded from console storage (without VMB intervention).
2000-07-10 10:38:23 +00:00
175e6ad859
Add code that allows the boot blocks to be loaded by VMB.EXE, and
...
also have optional MTPR printf available.
2000-07-10 09:55:36 +00:00
ab492849bc
implement net.inet.icmp.errppslimit.
...
make default value for net.inet.icmp.erratelimit to 0, as < 10ms value
does not do the right thing.
2000-07-10 09:31:29 +00:00
8658157274
Nexus vector number is 0x14-0x17, not 14-17! Fortunately, 3 wrong did
...
one right. Pointed out by Kenn Humborg (kenn@linux.ie ).
2000-07-10 09:14:32 +00:00
7403ef3d00
Need to include <sys/exec_elf.h> to make things happy. So much for adding
...
dead code.
2000-07-10 01:15:17 +00:00
048f1387db
Function signature for bus_intr_establish() changed.
2000-07-10 01:11:14 +00:00
3acffdb4a5
Update TODO list item #7 .
2000-07-10 00:50:22 +00:00
1cfb5e6456
Grab and use the memory model info from the flags in the ELF header.
2000-07-09 22:39:17 +00:00
469c88cc11
Clarify that the RX5C47X requires writes to the PCI_LEGACY to
...
disable and not PCI_BCR_INTR; this is what rev 1.9 did under
the label of "Maintenance."
2000-07-09 22:06:02 +00:00
ec71379542
Use TSO memory model for 32-bit userland.
2000-07-09 22:02:32 +00:00
e5cd515b89
Upgrate interrupt handling:
...
1) use interrupt vectors for specific zs chips rather than polling
all of them.
2) use softintr_schedule() and schedule it for a particular device
rather than poll all devices.
2000-07-09 21:58:43 +00:00
e6e9cc5c41
Move legacy pcic-mode disabling code from pccbb_chipinit() to
...
pccbbattach(). This is necessary as pccbb_chipinit() is deferred, and
may not run until after the pcic is already attached.
Now pcics are properly disabled on Sony VAIO, f'rinstance.
2000-07-09 21:58:30 +00:00
f43ab74a43
Shuffle around some fields to waste less space on LP64.
2000-07-09 21:55:24 +00:00
406e0f779f
Add a `device class' interrupt level argument (from machine/intr.h)
...
to bus_interrupt_establish().
It's currently only used in sparc64/dev/psycho.c to assign a CPU interrupt
level to devices in PCI slots.
2000-07-09 20:57:41 +00:00
2a57393a0f
Re-arrange headers; drop <machine/cpu.h>.
2000-07-09 20:38:34 +00:00
230b3462ea
uncomment part which has been accidentaly commented out in last commit
2000-07-09 14:16:02 +00:00
84fe4f536c
Comment police. s/DIAGNOSTICS/DIAGNOSTIC/
2000-07-09 14:13:04 +00:00
f61c58e333
fix accidentaly dropped dependance on wrtvid
2000-07-09 14:11:10 +00:00
0b9b0cbc03
backout previous change, this should not have been committed (yet)
2000-07-09 14:07:06 +00:00
26e11b6af2
Make buildable on NetBSD/mvme68k 1.4.1.
2000-07-09 13:47:33 +00:00
d132b13d89
regen
2000-07-09 13:40:20 +00:00
8f9515257a
- massive warning fix fest.
...
- fix pread/pwrite return values (plus some other syscalls that looked
similarly broken).
- prototypes and clean up for netbsd32_ioctl.c
now getpw*() works under compat32!
2000-07-09 13:39:31 +00:00
152f5c5f28
remove unused variable.
2000-07-09 13:35:54 +00:00
8a661b9beb
be more cautious about tcp option length field. drop bogus ones earlier.
...
not sure if there is a real threat or not, but it seems that there's
possibility for overrun/underrun (like non-NOP option with optlen > cnt).
2000-07-09 12:49:08 +00:00
f6cf4e5f93
move struct sys_config from mca_machdep.c to mca_machdep.h
...
fix copyright (overlooked in original commit)
use bitmask_snprintf() instead of printf("...%b") (though that part is commented
out anyway ATM)
2000-07-09 10:35:11 +00:00
1566e57da8
Simplify address decode logic for memory parity error condition.
...
XXX Need to have a better reporting message here.
2000-07-09 09:14:29 +00:00
3c55597b94
Add a patchwork prototype declaration for netintr().
2000-07-09 08:08:20 +00:00
194f2ce04e
Comment clarification in this file. Have consistent terminology, ATC
...
instead of TLB.
2000-07-09 07:14:18 +00:00
d8a9a3cc7b
add ppsratelimit(9), which does event-per-sec rate limitation.
...
use it from icmp6 error rate limitation code.
XXX better name for the function?
2000-07-09 06:44:57 +00:00
8f3d56a298
shorten splclock() period in ratelimit().
...
From: onoe
2000-07-09 06:40:08 +00:00
18c0283349
look in /emul/netbsd32 for __stat13() and __lstat13().
2000-07-09 03:03:35 +00:00
d621cc4cb0
Add missing newlines in some messages.
...
Set Vpp the same as Vcc by default. We need to do more with voltage sense.
2000-07-09 01:55:18 +00:00
39ff4faf53
Fix compiler warning.
2000-07-09 01:52:17 +00:00
9ad7bd8d37
Increase the example DDB_HISTORY_SIZE.
2000-07-09 01:36:06 +00:00
33090b8b89
Enable DDB history.
2000-07-09 01:35:52 +00:00
caf07dfa04
When unmounting, make sure to free the syncer vnode so that it can be reused.
2000-07-09 00:59:03 +00:00
bd8f07c394
Recognize the i82559ER.
2000-07-09 00:46:26 +00:00
5cdb782283
Regen.
2000-07-09 00:45:56 +00:00
9d0e35cc63
Add ID for i82559ER.
2000-07-09 00:45:14 +00:00
4087b4e418
Do the interrupt fixup for all busses, not just bus 0.
...
This is necessary on some machines with multiple onboard PCI busses.
2000-07-09 00:42:47 +00:00
0ef0f52d06
Turn on DDB history by default.
2000-07-09 00:41:24 +00:00
74e5e4f040
Fix for:
...
7. Numbers starting with [a-f] should work, but symbols
of the same name should have priority.
2000-07-08 21:35:32 +00:00
5a7cb20576
gdb requires a `struct fpstate' so provide one.
2000-07-08 19:25:14 +00:00
dcf6e7b09e
When receiving an rx interrupt on a closed or unconfigured port, read
...
the data out of the board anyway so it won't re-interrupt anyway.
Fix tested by C Kane <ckane@best.com>
2000-07-08 18:36:02 +00:00
d5906caa54
Format paranoia
2000-07-08 18:11:02 +00:00
bb22022c59
Format paranoia.
2000-07-08 18:10:25 +00:00
4eec028c2a
More format checking
2000-07-08 17:45:53 +00:00
e292542bce
More format attributes
2000-07-08 17:36:01 +00:00
ed9ce99d8c
printf format paranoia
2000-07-08 17:12:08 +00:00
8951fce5df
printf format safety
2000-07-08 17:10:22 +00:00
eb1939c85f
printf format paranoia
2000-07-08 17:09:02 +00:00
26b0bc1c2e
printf format safety
2000-07-08 17:08:35 +00:00
6a6ee4aa91
cleanup way vers.c file is created/compiled
2000-07-08 15:40:53 +00:00
50dc07c081
get the version number differently - instead of using RCS version number
...
of version file, take version from last line of that file as the part from
start of the line to ':'
2000-07-08 15:36:05 +00:00
89ccc75157
use _C_LABEL() for bootversion, instead of hardcoding the reference as _bootversion
2000-07-08 14:41:04 +00:00
404e6e3a61
Drop KERNFS
2000-07-08 11:33:24 +00:00
fba6fe287b
* Redo previous; set PIR on 604 and 7400 only.
...
* printf clean-up.
2000-07-08 07:23:17 +00:00
065b56c096
backout part of previous: turn off intrdebug, and another debug message
2000-07-08 05:04:01 +00:00
6421cc8af8
regen
2000-07-08 04:39:50 +00:00
d74c0a2e3e
add microSPARC IIep PCI controller
2000-07-08 04:38:55 +00:00
7314c0eba6
Clear the reservation in __cpu_simple_lock_try even if it failed to lock.
...
(From ws@tools.de )
2000-07-08 04:36:56 +00:00
d770f87fef
Pullover rev 1.320 - rev 1.358 of GENERIC to IOPENER, and merge conflicts.
...
Add GENERIC rev in "from:" line to aid in future merging.
Major highlights include SOFTDEP, and, err, 4 blank lines.
2000-07-08 03:24:36 +00:00
71f3f1c282
Pullup rev 1.233 - rev 1.358 of GENERIC to CARDBUS, and merge conflicts.
...
Add GENERIC rev in "from:" line to aid future merging.
Major highlights include COMPAT_14, COMPAT_AOUT, NTFS, OVERLAY,
SOFTDEP, INET6, IPSEC, pcic iosiz changes, cz, dpt, rtk (cardbus!),
awi, cnw, ray, wi, xi, joy, and gif.
2000-07-08 02:47:02 +00:00
7fb0549d87
Add ep* at isapnp and ep* at isa.
...
3c509 works fine on my CATS.
2000-07-08 01:24:35 +00:00
2c1dc518bd
Changes for readability:
...
- #define LP64 dependent STACKFRAME macro once
- use a LOAD_ASCIZ macro for setting up the format string
for debug messages.
2000-07-07 23:28:28 +00:00
e0b6c173e7
s/preserving ... bytes of symbol table/using ... bytes of symbol table/
...
"preserving" implies that the data may be copied and might otherwise
be freed, and that other data in the symbol table or sections of
the kernel might be freed, however there is no mechanism for these
things to take place, so "using" is clearer.
2000-07-07 21:55:18 +00:00
21322c88b6
Observe deficiency in printfs reporting symbol table problems
...
before we have a message buffer.
2000-07-07 21:51:38 +00:00
d58fe92d14
Detect ELF sections (string and symbol tables) by looking them
...
up by name (in .shstrtab) instead of guessing based on section
type (and throwing away the small one). In addition to being cleaner,
multiple symbol tables are no longer and error condition, so
booting netbsd.gdb no longer results in ddb being unable to use
*any* symbols.
2000-07-07 21:50:26 +00:00
0d97100854
Use vme_dmamap_create().
...
Also, this device lives in VME_D16 data space.
2000-07-07 21:12:21 +00:00
67f1f77b78
Use vme_dmamap_create().
2000-07-07 21:11:08 +00:00
468c727a28
Temporary fix to prevent the clock from stopping on UIIi machines.
2000-07-07 19:59:36 +00:00
14b1b05f10
Rename GENERIC to GENERIC32 and GENERIC64 to GENERIC to allow snapshots to
...
build properly.
2000-07-07 19:11:56 +00:00
ec67eee51f
sync with kame.
...
introduce in6_{recover,embed}scope, for in-kernel scoped-address manipulation.
improve in6_pcbnotify.
2000-07-07 15:54:16 +00:00
2b69bc2115
BUFCACHE=20
2000-07-07 14:22:57 +00:00
4384010332
more extent_alloc() fixes:
...
check that newstart + size - 1 doesn't overflow the end of the extent, rather
than the "dontcross" value, which can easily overflow the end of an extent
when being asked for an object with a large boundary requirement. this test
is more valid, in any case, and fixes extent_alloc() failure when the start of
the extent is not "aligned".
2000-07-07 14:10:48 +00:00
2646cf1612
Use the CMD PCI0648/9 IRQ ACK code for the 0646 too, makes the 0646 works
...
in native mode.
2000-07-07 13:54:25 +00:00
446c144ae3
Set PIR only if MULTIPROCESSOR is defined.
2000-07-07 13:22:06 +00:00
b91804af6c
split up debug flags so i can turn off some of them
2000-07-07 13:10:34 +00:00
cacf690261
Try both the BOOTPARAM and DHCP protocol (in that order as is the custom
...
with Sun machines).
2000-07-07 12:59:16 +00:00
4b21f66d57
work around a bug passing arguments to iommu_dvma_load_raw()
2000-07-07 12:53:29 +00:00
c0f4ea2a12
check that this *entry* is BUSCLASS_NONE (not the current device) in
...
bus_compatible(). fixes boot device detection on sbus. while i'm here,
sprinkle DPRINTF()s in the boot device detection code.
2000-07-07 12:44:47 +00:00
9a6c45e283
options BUFCACHE=20, plus a 64 bit config.
2000-07-07 08:44:16 +00:00
58a60a43f2
Gah. Bad port from FreeBSD code (thanks Robert Elz) for setting
...
up default timeout for watchdogging commands.
2000-07-07 03:14:53 +00:00
3f2289a3d7
Handle bus_dma aligment properly.
2000-07-07 02:50:19 +00:00
f420228afb
Define splaudio as splbio and IPL_AUDIO as IPL_BIO only if IPL_AUDIO
...
is not defined. Previously tested for specific system architectures (i386,
etc.) rather than just looking for IPL_AUDIO.
2000-07-07 01:11:12 +00:00
2c9058efbb
Oops, g/c some stuff from previous.
2000-07-06 23:29:13 +00:00
itojun