68f2474820
adapt to LANCE driver split; let PCNET/PCI use the 32-bit mode
1998-07-21 17:30:26 +00:00
9a59784f70
Split the LANCE driver into a part specific to the classic chip with
...
24-bit DMA addresses, and an independant part.
Implement support for the 32-bit mode in the newer (79c9xx) chips.
1998-07-21 17:26:45 +00:00
f520c72417
complete the options in opt_nfs_boot.h
1998-07-21 17:00:07 +00:00
cca4e566a9
Implement a better fix for the `gratuitous FIN' problem, as
...
mentioned on tcp-impl but with a bit more commentary.
1998-07-21 10:46:00 +00:00
dc08679458
Fix ioctl definitions for WSKBDIO_{SET,GET}LEDS.
...
from Takuya Koumoto <takuya-k@is.aist-nara.ac.jp>
1998-07-21 09:17:33 +00:00
3780fa036e
Add RCS IDs.
1998-07-21 07:48:36 +00:00
fc42c3b81d
Continued work on the esp scsi driver. Not yet working, but progress continues.
1998-07-21 06:17:35 +00:00
52cfd19bcf
Ever closer to KNF.
1998-07-21 01:17:14 +00:00
bb3c5257c7
Move the cs8900 driver's softc, etc. definitions to an MI location.
1998-07-21 01:04:55 +00:00
133efc841f
Use <dev/isa/cs89x0var.h>
1998-07-21 01:04:09 +00:00
0611893e60
Move the cs8900 driver's softc, etc. definitions to an MI location.
1998-07-21 01:04:01 +00:00
9c9a866a90
Move PacketPage read/write macros in to if_csvar.h
1998-07-21 00:58:46 +00:00
bdc9dcbe8a
G/c two more unused definitions.
1998-07-21 00:53:57 +00:00
23efef79fc
Move the code that prints Rx errors into a separate function, rather than
...
duplicating it.
1998-07-21 00:52:15 +00:00
9282418a78
Some cosmetic changes.
1998-07-21 00:40:17 +00:00
0987caaee6
G/c unused definition.
1998-07-21 00:39:21 +00:00
20fb09c609
G/c more unused debugging goo.
1998-07-21 00:24:45 +00:00
6014ea2216
Garbage-collect some unused debugging goo.
1998-07-21 00:23:18 +00:00
f45804c4c6
Nuke sc_iobase (and a serious misuse of it!)
1998-07-21 00:22:29 +00:00
22ff8accae
Use fixed-size types.
1998-07-21 00:20:35 +00:00
5b56c35223
Nuke the "pia" typedef.
1998-07-21 00:18:35 +00:00
44d02a07d0
Update for <dev/isa/cs89x0reg.h>
1998-07-21 00:11:03 +00:00
57488ef1e4
Remove the register descriptions from this file, and split them into
...
<dev/isa/cs89x0reg.h>
1998-07-21 00:10:11 +00:00
c3e7a09c4e
Use <dev/isa/cs89x0reg.h>
1998-07-21 00:08:57 +00:00
a083bc2950
Split the CS8900 register description from the SHARK-specific header file,
...
and place it here.
1998-07-21 00:07:33 +00:00
9e17315847
Write the CLOCK TEST bit *at least 16 consecutive times* during initialization,
...
as the clock source will be set incorrectly otherwise! From SMC Application
Note 7-15. Thanks to Christoph Badura for the pointer!
1998-07-20 21:39:05 +00:00
9df67db949
We're not Linux. If we still want driver version strings to be displayed
...
at boot, then I suppose DEBUG is a reasonable compromise.
1998-07-20 21:18:38 +00:00
d8e4026492
Oops, unused variable warning.
1998-07-20 21:17:30 +00:00
74fc0579eb
We're not Linux. If we still want driver version strings to be displayed
...
at boot, then I suppose DEBUG is a reasonable compromise.
1998-07-20 21:16:52 +00:00
79f77cc9ce
The mystery bit in the TEST register is actually the CLOCK TEST bit.
1998-07-20 20:45:06 +00:00
e99bc6379d
Don't deref a NULL tty pointer in the interrupt routine. This can happen
...
if we're the serial console, we have not yet been open'd, and we get an
interrupt for one reason or another.
1998-07-20 17:35:17 +00:00
2db169eb1f
Avoid possibly overflowing an mbuf. From Dan S. Decasper, via Chuck Cranor.
1998-07-20 16:41:05 +00:00
e641acf153
In configure(), initialize the HIL driver's software state before enabling
...
interrupts; if there's an interrupt pending (i.e. because the user pressed
a key or moved his mice while the kernel was being loaded), the interrupt
handler may safely be run. Fixes PR port-hp300/5397.
1998-07-20 10:47:50 +00:00
f5f944adfd
Regen
1998-07-20 07:34:11 +00:00
87dc83ee69
Remove duplicate DEC card
1998-07-20 07:33:54 +00:00
7a03c42491
Fix typo.
1998-07-20 02:17:17 +00:00
84676442e2
Commented out some bus_dma code, until I can fix.
...
(bus_dma.c needs sync with alpha port!)
Continued progress on scsi driver.
A couple of other compiler warning level of tweaks.
1998-07-19 21:41:16 +00:00
b4b261bbb0
Remove redundant opt_ddb.h
1998-07-19 20:45:26 +00:00
fb28f87855
Remove a check which restricted raw SCSI commands to the "minor 3"
...
("CTLMODE") subdevice. There are legitimate uses for raw commands with
normal tape handles too.
[I'm not sure if this is a final solution. Administrators might want
to set up a more finegrained policy. However, this should not be mixed
with the "set defaults" semantics of the "CTLMODE" subdevice; another
flag should be used instead (eg execute permission or a minor number bit).]
1998-07-19 18:43:20 +00:00
d408ddc6c7
Make the combination "profiled kernel" and "${KERN_AS} == "library""
...
work too. (mcount.po was forgotten)
1998-07-19 18:35:16 +00:00
66370d4fe9
Regen
1998-07-19 17:30:02 +00:00
e3bc291504
Add a devlist2h.awk so that we don't sprinkle the same constants over
...
each device driver file and use it.
1998-07-19 17:28:15 +00:00
334afaa14e
Regen from pcidevs.
1998-07-19 12:25:46 +00:00
463e7e6dce
Fix product ID for Matrox Mystique, add NEC PowerVR PCX2.
1998-07-19 12:23:56 +00:00
53e3ba1192
Make DDB work again.
1998-07-18 23:02:33 +00:00
6054d626f9
Switching dev/ic/lpt.c to use spllpt() instead of spltty(). It doesn't use
...
tty structures, and on some machines (namely the DraCo internal lpt, and some
multi-i/o boards for Amigas and DraCos), tying spltty to the pretty high printer
interupt level would hurt serial performance.
On all affected ports but Amiga, spllpt() has been defined in machine/intr.h
to be spltty(), thus preserving old behaviour. Portmasters are encouraged to
change is, if they feel something else is better (e.g., one of its own were
possible).
1998-07-18 21:27:25 +00:00
a455ce7531
Locking is now in the outer framework for isp_init/isp_reset- this allows
...
us to call isp_reset/isp_init internally with impunity.
Rename isp_phoenix to isp_restart and make it global. Clean it up a tad.
If we get an ASYNC_SYSTEM_ERROR code in isp_intr, call isp_restart and
return- the f/w is toasted at this point (usually), so we have to bring
things back to a known state.
In isp_mboxcmd, when we don't see the HOST_INT bit go clear, try and
find out if the isp is trying to tell us something and try again. This
may avoid a potential deadlock where the previous mailbox command hasn't
been cleared by the ISP.
In isp_init don't try and get device parameters if we already have them-
this typically doesn't work if we're in the middle of an isp_restart.
1998-07-18 21:10:16 +00:00
9afa921bc1
roll core version number and add a global visible isp_restart function
1998-07-18 21:06:20 +00:00
35c8fecf3a
fix headers
1998-07-18 21:05:39 +00:00
b85bf24ed5
fix bogus comments
1998-07-18 21:05:04 +00:00
drochner