2f5635f70b
A slightly unfinished i82586 driver, based on Garrett Wollman's.
1993-11-08 20:15:31 +00:00
ab12bacae0
note that use of splnone() is prolly bogus; splnone() itself is bogus,
...
so it's use is. 8-)
1993-11-05 23:18:04 +00:00
08c263706c
add mcd: Mitsumi CD driver by Holger Veit and Brian Moore
1993-11-04 09:12:30 +00:00
0f926f7b02
ttyfree() bugfix edition, plus various minor tweaks.
1993-10-29 08:58:34 +00:00
08f5f6a6fa
Add MADDRUNK.
1993-10-26 12:16:35 +00:00
16a520e7ed
* Revision 2.11 1993/10/23 04:21:03 davidg
...
* Novell probe changed to be invasive because of too many complaints
* about some clone boards not being reset properly and thus not
* found on a warmboot. Yuck.
*
* Revision 2.10 1993/10/23 04:07:12 davidg
* increment output errors if the device times out (done via watchdog)
*
* Revision 2.9 1993/10/23 04:01:45 davidg
* increment input error counter if a packet with a bad length is
* detected.
*
* Revision 2.8 1993/10/15 10:59:56 davidg
* increase maximum time to wait for transmit DMA to complete to 120us.
* call ed_reset() if the time limit is reached instead of trying
* to abort the remote DMA.
*
* Revision 2.7 1993/10/15 10:49:10 davidg
* minor change to way the mbuf pointer temp variable is assigned in
* ed_start (slightly improves code readability)
*
* Revision 2.6 93/10/02 01:12:20 davidg
* use ETHER_ADDR_LEN in NE probe rather than '6'.
1993-10-23 04:59:41 +00:00
3810963ed5
Add at_setup_dmachan(). Minor cleanup.
1993-10-22 20:24:14 +00:00
7620c96e5d
Make atdevbase an int.
1993-10-17 14:03:54 +00:00
6067dc9ea8
Minor cleanup.
1993-10-17 05:34:23 +00:00
2ce6de16d5
Add isa_establish(), for all it's worth (which is to say, nothing).
1993-10-16 05:25:21 +00:00
c73d85d341
Panic if DMA with odd length attempted on a 16-bit channel.
1993-10-16 03:55:59 +00:00
56cc97cb80
update from rick, tarfile of Oct 11 10:46
1993-10-15 02:56:33 +00:00
4f94812b29
New file with DMA code from isa.c, modified to check for some errors.
1993-10-14 05:22:57 +00:00
63a052d489
fixed two icky rcs-log's.
1993-10-12 03:48:52 +00:00
fe806afec2
pmax code from <ralphc@pyramid.com> & <rick@snowhite.cis.uoguelph.ca>
1993-10-12 03:22:19 +00:00
e9b92335b0
Add DRQUNK and IOBASEUNK.
1993-10-06 12:09:25 +00:00
e256404adc
Cyclades Cyclom-{4/8/16}Y multiport async serial board driver.
1993-10-06 09:30:16 +00:00
13a48b8263
Goes with the new cy driver.
1993-10-06 09:27:27 +00:00
892a4681ae
* Revision 2.5 93/09/30 17:44:14 davidg
...
* patch from vak@zebub.msk.su (Serge V.Vakulenko) to work around
* a hardware bug in cheap WD clone boards where the PROM checksum
* byte is always zero
*
* Revision 2.4 93/09/29 21:24:30 davidg
* Added software NIC reset in NE probe to work around a problem
* with some NE boards where the 8390 doesn't reset properly on
* power-up. Remove initialization of IMR/ISR in the NE probe
* because this is inherent in the reset.
*
* Revision 2.3 93/09/29 15:10:16 davidg
* credit Charles Hannum
*
* Revision 2.2 93/09/29 13:23:25 davidg
* added no multi-buffer override for 3c503
*
* Revision 2.1 93/09/29 12:32:12 davidg
* changed multi-buffer count for 16bit 3c503's from 5 to 2 after
* noticing that the transmitter becomes idle because of so many
* packets to load.
*
* Revision 2.0 93/09/29 00:00:19 davidg
* many changes, rewrites, additions, etc. Now supports the
* NE1000, NE2000, WD8003, WD8013, 3C503, 16bit 3C503, and
* a variety of similar clones. 16bit 3c503 now does multi
* transmit buffers. Nearly every part of the driver has
* changed in some way since rev 1.30.
1993-10-01 02:01:43 +00:00
4a21fe3648
ifdef out the ttyfree()'s, so that fill_eproc doesn't panic when
...
a process's session still holds a ref to a tty which has been deallocated
and reused.
1993-09-29 02:36:21 +00:00
b85a24ec4e
get rid of stray printfs (turn them into "lprintf"s)
1993-09-28 21:26:59 +00:00
fd156a97fa
New i386 code.
1993-09-14 17:28:06 +00:00
1c880d62bf
As of this revision, all known bugs have been fixed. Some of the fixes include:
...
1) fixed 3c503 lock-up if the thinwire cable was disconnected at boot time
2) 8013EBT boards now work (quite well!) in 16bit/16k mode
3) ED_NO_DOUBLE_BUFFERING flag now works
4) slightly higer performance (about 3%) with 16bit WD/SMC boards
5) support for WD8013WC (10BaseT) boards
Additionally, the probe code has been reorganized to be much cleaner. This
revision of the driver is 1.25. The release notes have been updated as well.
1993-09-09 09:40:56 +00:00
0535b6089e
Avoid clash of struct ns_addr with #define ns_addr.
1993-09-06 18:30:39 +00:00
4475f55d8f
Include systm.h to get prototypes (and possibly inlines) of *max functions.
1993-09-04 00:02:48 +00:00
9aed375ba3
tty XXstart() routines return void
1993-08-29 13:46:31 +00:00
62164fe535
Add find_isadev() and have sysbeep() use common defines.
1993-08-28 00:13:00 +00:00
225917bfe6
0.9 "official" patch 001:
...
(1) added support for ed1 in both generic kernels at:
device ed1 at isa? port 0x250 net irq 9 iomem 0xd8000 vector edintr
(2) brought if_ed.c up to DG's 1.19 rev.
1993-08-26 00:26:50 +00:00
4543c1ebfd
changes from 0.9-ALPHA2 to 0.9-BETA
1993-08-23 04:59:38 +00:00
e5ea45d312
there are some devices out there which use... NO I/O PORTS!
1993-08-08 09:54:23 +00:00
67dfce6728
Normalize play_msf changes with 386bsd patch.
1993-08-04 19:33:44 +00:00
80a965ba28
Add play_msf command and MSF variants. This is SCSI2 stuff and is needed for many flavors of player utilities.
1993-08-04 17:26:20 +00:00
4a385c1228
with -Wall would bomb, on incomplete type 'selinfo'. bpfilter.h include
...
moved down, and select.h included.
1993-08-03 01:52:57 +00:00
4862b84c92
Add RCS identifiers (this time on the correct side of the branch), and
...
incorporate recent changes in netbsd-0-9 branch.
1993-08-01 19:22:24 +00:00
7b2afa7fe6
incorporate changes from 0-9-base to 0-9-ALPHA
1993-07-28 02:20:34 +00:00
8141ce5d83
kill damned RCS Log
1993-07-19 16:58:20 +00:00
886f6afa56
Reading file marks or writing end of tape return 0 bytes, AND THEY
...
DON'T SET THE ERROR BIT ON THE BUFFER UNLESS THE AUTHOR OF PHYSIO
IS STUPID!
1993-07-19 16:44:38 +00:00
30c2a20262
patches from allen briggs to fix a minor bug in *attach()
1993-07-19 11:30:49 +00:00
331148c31a
Make these files GCC 2 happy.
1993-07-17 16:20:24 +00:00
2ee2073a53
scsi_switch had wrong entries for these controllers...
1993-07-17 11:00:09 +00:00
ba408056a6
Use splnet, not splimp.
1993-07-13 21:53:06 +00:00
6cc173695a
moved bfdttach point to same place as other drivers, from greenman
1993-07-12 13:13:41 +00:00
3be4221095
Change tty code to use clist interface, but with ring buffer implementation.
...
Also, fix a couple of bugs in tty.c and pccons.c, and some gross kluginess
in the hp300 stuff.
1993-07-12 11:36:53 +00:00
0daaa4f16c
Make splimp = splnet | spltty, and get rid of SLIP kluge for splnet and
...
spltty.
1993-07-11 14:03:51 +00:00
cb880ccb94
fix evil interaction with new physio; don't set error bit for short reads.
1993-07-09 04:28:55 +00:00
80dc38edb3
documentation error
1993-07-08 08:22:17 +00:00
7afa674eb4
the "struct tty *cn_tty" field in cons.c wasn't being used by anything
1993-07-07 11:12:26 +00:00
1eacd36710
pccons.c now dynamically allocates it's "struct tty"
...
cons.c's "struct tty *cn_tty" wasn't used by any of the kernel, and goes away.
1993-07-07 11:00:23 +00:00
bab148ba4e
delete inclusion of rlist.h again. grr.
1993-07-07 06:52:39 +00:00
9bff90a5c1
added a timeout debugging mode to wd.c so that people can see how slow
...
their controllers really are. Look for the WDCNDELAY_DEBUG definition.
1993-07-07 05:50:35 +00:00
d670635e8b
ok, 5 second command timeouts..
1993-07-07 01:05:42 +00:00
ceec40c98f
clean up code for timeout/untimeout/wakeup prototypes.
1993-07-06 06:06:26 +00:00
86999439b2
number of changes:
...
1. controller reset code moved into one function, called from more places now.
2. more places now do timeouts. TIPCAT code turned on.
3. blew away the unused WDOPENLOCK test code.
4. delay is now done using WDCNDELAY repetitions of DELAY(25). Up to 2.5 second
pause accepted from controller (some controllers have some commands that are
actually this slow)
5. some of the old timeout code was really whacked.
1993-07-06 00:42:43 +00:00
2d53469109
get rid of extraneous inclusion of rlist.h
1993-07-06 00:31:52 +00:00
2cb34d6d65
added a missing {/} pair that barsoom seems to have taken out, but
...
which the standard 386bsd 0.1 driver did have. This is for a piece of
code in the bad block handling. found/fixed by hpeyerl.
1993-07-05 04:44:48 +00:00
3322c7b691
all timeout code now calls DELAY() so the timeout delays are the same
...
length on all processors. Where possible, the controller is reset if it
times out.
1993-07-05 03:20:57 +00:00
ed61b76822
increased the timeout inside wdcommand(). Some controllers impliment some
...
commands very slowly.
1993-07-05 00:08:27 +00:00
44b5013862
Reject non block-aligned transfers (where a block is 512 bytes in length);
...
they were causing scsi controller lockups. Replace an occurrence of "512"
with SECSIZE, which is #defined to be 512.
1993-07-04 07:09:59 +00:00
7e940b55e0
add support for David Greenman "ed" driver
1993-07-03 12:21:07 +00:00
d77e126ab2
add support for David Greenman's "ed" driver.
1993-07-03 12:19:36 +00:00
3c4b913d33
Fix a bunch of things.
1993-07-01 00:24:09 +00:00
f7dd4be020
Updated comments.
1993-06-30 04:13:34 +00:00
62442b4e98
Added com_scratch entry.
1993-06-30 04:04:24 +00:00
1b69e917eb
ANSIfications.
1993-06-27 06:59:20 +00:00
51ac6a0997
ANSIfications.
1993-06-27 06:27:29 +00:00
0e6cb953ea
ANSIfications - removed all implicit function return types and argument
...
definitions. Ensured that all files include "systm.h" to gain access to
general prototypes. Casts where necessary.
1993-06-27 06:01:27 +00:00
277c73694e
print "maddr 0xd0000 msize 65536" as "maddr 0xd0000-0xdffff" instead.
1993-06-20 07:24:53 +00:00
d1ed63195d
fix the divide-by-zero problem w/old disks. this patch is ws's "fault."
1993-06-18 20:45:35 +00:00
ebfdfc5b8a
Silence size complaint at probe.
1993-06-17 12:18:29 +00:00
280a747d4e
woops - another typo.
1993-06-16 10:39:35 +00:00
1311db833c
whoops. typo.
1993-06-16 04:31:37 +00:00
a6d9adf224
fix to intuit the maximum number of scsi units available on a device
...
driver. this piece at least, should be safe from changing sizeof(dev_t)
1993-06-16 03:39:30 +00:00
5a2b8d1abb
Fix typo.
1993-06-16 02:59:42 +00:00
94df11ad63
Make sysbeep() take a frequency, not a timer count, and add constants
...
BEEP_FREQ and BEEP_TIME which can be overridden in the config file.
1993-06-16 02:57:17 +00:00
528edf6037
Move definitions of TIMER_FREQ to timerreg.h, and fix value of CF for DELAY().
1993-06-15 21:37:14 +00:00
930a773dce
Clean up beep code a miniscule amount, add interrupt protection, and
...
make multiple beeps generate a continuous tone.
1993-06-15 20:34:54 +00:00
5592ad3fbb
Ignore interrupts if the device isn't open. This prevents stray interrupts
...
from hosing the works. What a stupid architecture.
1993-06-15 01:50:32 +00:00
925a429d35
Reduced bus-on time from the default of 11ms -> 9ms, to prevent floppy from
...
becoming data-starved during simultaneous fd & scsi activity.
1993-06-14 04:16:03 +00:00
f37ee25bb2
sigh. one day i'll finish this driver, meanwhile, one more fix..
1993-06-10 04:50:42 +00:00
f6779cbdce
minor silliness related to two or more controllers
1993-06-09 22:36:40 +00:00
f1b8c74730
make getc() and ungetc() be rb{un,}getc(), so getc() and ungetc()
...
don't conflict w/ansi prototypes...
1993-06-06 23:04:42 +00:00
8a05b36058
incorporate Bruce Evans' interrupt changes, as hacked by Rod grimes,
...
for patchkit patch 158. it appears to work well.
1993-06-06 04:14:01 +00:00
9d6a908bb7
patch from rgrimes to add delay to let data port stabilize, also
...
make "lpflag" unique to each driver
1993-06-05 22:58:29 +00:00
2adecf84f6
1. It is now possible to build a kernel that does not have a pc0 device driver.
...
2. "press any key to reboot" reads the key from the console.
3. wddump() still needs a non-blocking getc() routine (or flush)
1993-05-28 09:10:52 +00:00
0b12df586d
1. It is now possible to build a kernel that does not have a pc0 device driver.
...
2. "press any key to reboot" reads the key from the console.
3. wddump() still needs a non-blocking getc() routine (or flush)
1993-05-28 09:10:29 +00:00
d307daf9f6
scsi probing spent too much time on the bus -- sped it up now,
...
and simplified the message printing code (works the same)
1993-05-27 10:14:02 +00:00
2f0c0eb674
tty dynamic allocation
1993-05-26 10:06:41 +00:00
ee59868966
patch00149 by Julian Elischer <julian@jules.dialix.oz.au> & Rodney Grimes.
...
When an error was encountered, the sd/cd drivers printed blockno&ff0000
rather that blockno.
1993-05-25 07:27:31 +00:00
fe1802950b
add include of select.h if necessary for protos, or delete if extraneous
1993-05-22 11:40:42 +00:00
30177b538f
add rcsids to everything and clean up headers
1993-05-22 07:56:12 +00:00
dde4fa6fe1
fixed typo
1993-05-22 07:40:46 +00:00
171495eaa4
Changed when disks are started, to get DEC disks working.
1993-05-21 12:20:30 +00:00
6fb28b3c74
more disklabel changes
1993-05-20 23:12:53 +00:00
e34f239662
First cut at cpu independent disklabels.
...
There will be niggly little details no doubt..
1993-05-20 22:48:23 +00:00
c59cd967ff
add rcsids and clean up file headers
1993-05-20 03:46:09 +00:00
8d6c77881c
make kernel select interface be one-stop shopping & clean it all up.
1993-05-18 18:18:40 +00:00
6dedb5151c
add hp300 kernel files. generic kernel files might need some help...
1993-05-13 13:56:20 +00:00
c2cbdf5d9e
fix stupid line transposition (from John Brezak <brezak@osf.org>)
1993-05-11 08:07:50 +00:00
e439c311cd
Whoops. One more 0x0ffff to expunge..
1993-05-11 04:15:22 +00:00
4c40e74463
1. id_irq is a u_short
...
2. "irq ?" sets it to (u_short)-1
3. "irq #" sets it to (1<<#)
4. not specifying an interrupt sets it to 0.
Until someone else comes up with a better scheme, that's the way it is.
If you have a driver that turns the interrupt off, set it to ZERO.
If, after calling XXprobe(), id_irq is still (u_short)-1, that is the same
as if probe() failed.
1993-05-11 04:06:23 +00:00
545cc18754
This patch allows the wd device driver to tell how big the disks are on
...
WD1007-derived controllers. In this example, wdc0 is a WD1007-clone,
and wdc1 is a WD1003-clone. WD1007 controllers are generally ESDI
and IDE controllers.
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wd0 at wdc0 targ 0: 322MB 1224 cyl, 15 head, 36 sec <disktype>
wdc1 at 0x170-0x17f irq 7 on isa
wd2 at wdc1 targ 0: (unknown size) <disktype>
1993-05-10 05:53:22 +00:00
5ae997897e
i thought i deleted this line before!
1993-05-09 04:25:48 +00:00
ca0db18897
multiple master controllers would probe tthe first one N times instead of
...
once each. never mind not worth worrying about what i;m talking about.
1993-05-08 00:50:10 +00:00
ca1b23d6dd
no irq == -1, or, actually, 0x0ffff (f*ing unsigned short...).
...
this would break devices w/o interrupts (like lpa).
1993-05-07 10:38:04 +00:00
5220c82b50
fix lpt driver and add lpa driver. from 386bsd pk patch 133
1993-05-07 05:38:55 +00:00
47622db521
fixed bug from last commit
1993-05-05 00:29:38 +00:00
a0bcb17e60
support for making dev->id_alive be set, this is for iostat to
...
find disk devices. wee bit of a kludge. sub-device attach()
routines must now return 1 for successful attach(), 0 otherwise.
Other bsd's do this too..
1993-05-04 08:27:29 +00:00
ad845984f9
add pg_wait, which must be set if you want pg() to actually wait for keybd
...
input. this one is way useful...
1993-05-04 05:47:50 +00:00
70754f5c6b
fixed loopback == nuke problem.
...
This fix is probably not optimal, but it works.
1993-05-04 02:37:27 +00:00
11dce888dd
fixed silly typo.
1993-05-02 20:14:48 +00:00
6c15f33674
Fix error in last change. B-P
1993-05-01 19:12:45 +00:00
c3c6f70cea
Move bpfattach() call into hpattach().
1993-04-30 23:44:03 +00:00
dbeb3a98e0
HP cards use 32 I/O ports, not 16.
1993-04-28 23:57:42 +00:00
d494d8e591
cosmetic change
1993-04-26 18:45:49 +00:00
c08b444d52
id for scsi_attach must be an int.
1993-04-26 11:54:23 +00:00
f67957329b
Fix up error messages and return values.
1993-04-22 00:35:02 +00:00
c2f7555fda
Display more meaningful message on SCSI `unit attention'.
1993-04-20 10:51:51 +00:00
10e418c8b6
a test for mycroft..
1993-04-20 08:38:03 +00:00
30a1d7a9f1
Don't overwrite global kernel version string.
1993-04-19 21:20:46 +00:00
81b91f4488
Fix subtle word-size error.
1993-04-19 06:02:16 +00:00
0105f6f55d
Return correct value for new probe sequence.
1993-04-18 10:14:15 +00:00
e2a9eb19a4
slight code quality improvement. not related to the bug with very
...
old controllers or disks! :-)
1993-04-18 10:03:20 +00:00
ba40575afe
Use new format for attach message.
1993-04-17 04:46:12 +00:00
e415187cd4
Add driver for HP ISA and EISA ethernet adapters.
1993-04-17 01:39:27 +00:00
6bee5294bc
ioconf changes, see previous cvs's that dumped core
1993-04-15 07:57:50 +00:00
fbecd3e987
Once more: some changes to the ioconf.c structure. It will now handle
...
devices hanging off controllers, any kind of controller.
A device on isa0 is called at probe(self), then attach(self)
A controller on isa0 is called at probe(self), then all it's children with
defined unit numbers are initialized by calling attach(subdev); next all
subdevices with unit ? are initialized by calling attach(sundev).
Almost all device entry points is now like the vax/sun model (intr being
the weird one)
1993-04-15 07:52:08 +00:00
6eb0490333
NDDB made a re-appearance....
1993-04-15 07:11:01 +00:00
e42c6edf94
ooops. DDB instead of NDDB. A typo, i swear
1993-04-15 07:09:23 +00:00
653e85f75a
#ifdef DDB fix
1993-04-15 07:01:16 +00:00
bf6814fb30
wd driver would fail on calling wdgetctlr() for older drives and
...
controllers. New behaviour is that if the standard method fails, try
to recalibrate the drive. Success means the drive exists. patch by
hpeyerl@novatel.cuc.ab.ca (who owns several of these historical
artifacts)
1993-04-15 06:39:00 +00:00
bee6f373e4
fixed various bugs like cdattach() returning garbage.
1993-04-12 12:10:28 +00:00
d0d3380f80
small fixes
1993-04-12 10:15:21 +00:00
2c98ef3b72
new scsi subsystem.
...
changes also in config/mkioconf.c
i386/isa/wd.c, fd.c, and all scsi drivers.
1993-04-12 08:19:28 +00:00
f262b564a2
new scsi subsystem.
...
changes also in config/mkioconf.c & sys/scsi/*
1993-04-12 08:17:23 +00:00
506ea71fe9
was saying "not responding" on failed probe. that's bogus.
1993-04-10 21:09:13 +00:00
034707f9e5
fixed to be compliant, subservient, and to take advantage of the newly
...
hacked config(8)
1993-04-10 12:04:35 +00:00
fa76d62392
have probe return size of io space on successful return, rather
...
than simply 1.
1993-04-09 16:43:56 +00:00
c2176edbac
have probe return size of io space on successful return, rather
...
than simply 1.
1993-04-09 16:25:07 +00:00
2bbe287e49
make printing of i/o addresses a bit prettier, and fix off-by-one error.
1993-04-09 16:24:26 +00:00
cf15785585
from Rodney W. Grimes (rgrimes@agora.rain.com) (patchkit patch 117):
...
This patch adds the symbol names to icu.s that vmstat expects
the interrupt counters to be called. It also adds code to config
so that the names of the interrupts are written at the end of vectors.s
so vmstat can report real device names. It also cleans up and enables
the logging of stray interrupts. The counters for false interrupts
are added but the fix for them is not (the fix I have is not done
very good.) A false interrupt is when a device asserts it's interrupt
signal, then removes it before the 8259 can latch it. This is the number
one cause of stray IRQ7's and IRQ15's.
Additional device probe information is now printed. This includes
ending I/O address (many drivers do not return the correct value from a
probe this still needs to be fixed), memory address and size, driver
flags passed in by config.
1993-04-09 13:43:40 +00:00
b9bd4b25de
dmesg output at boottime now tries to print out information as
...
soon as it is available. The output looks much more like Sunos.
1993-04-08 08:26:46 +00:00
0d718ac79e
attempting to open an already opened tape drive should get you EBUSY, not
...
ENXIO.
1993-04-08 00:20:02 +00:00
de24d978d5
wd7000 device driver, put in IO_WDS entry in isa.h. You can now build a
...
kernel with it. Hope your dma works better than mine <grr>
1993-04-06 20:58:01 +00:00
a2b4863160
ripped out a message
1993-04-06 12:09:55 +00:00
9b67a6d7ad
Mod-barsoom wd additions. config program + kernel config files changed too.
...
fd support had to change slightly too.
1993-04-06 10:06:28 +00:00
c3d2e42be0
added: incomplete wd7000-asc scsi controller device driver.
1993-04-06 10:04:46 +00:00
c32e85d3c3
moved closing #endif to include comselect
1993-03-27 09:24:42 +00:00
f23291fb78
added support for microtime routines by Steve McCanne (mccanne@ee.lbl.gov)
1993-03-23 08:12:09 +00:00
e541169ce2
after 0.2.2 "stable" patches applied
1993-03-21 18:04:42 +00:00
61f282557f
initial import of 386bsd-0.1 sources
1993-03-21 09:45:37 +00:00
mycroft