versions work correctly; at some point between then and the immediately
preceding revisions, the "stylistic" changes to one (or both) stdarg.h
and varargs.h broke passing doubles to printf().
parameter parameters shadowing locals. Replace vmapbuf() and vunmapbuf()
with the Alpha-port versions, which are cleaner (use round_page(),
trunc_page(), etc.)
* add a new enum decstation_intr_t to trap.c, naming each instrumented
interrupt symbolically, and used to index into intrcnt[]. Change the
model-specific interrupt handlers to use the decstation_intr_t when
updating interrupt counters.
* add instrumentation to the kmin and maxine interrupt handlers.
* fix a bug that counted each hardclock interrupts on the kn02 twice.
The hardcoded mapping from locore names to units is gross; but these
counters will hopefully be useful in identifying interrupt hot-spots
and PPP problems on the 3MIN.
Rename the ioctl asic register and slot macros from ASIC_<xxx> to
IOASIC_<xxx>, to be compatible with the machine-indpendent names in
sys/dev/tc/ioasicvar.h. The pmax code still uses
sys/arch/pmax/pmax/asic.h, as some of the registers and offsets
defined there are not yet defined in sys/dev/tc/ioasicvar.h.
Rename the ioctl asic base-address pointer from `asic_base' to `ioasic_base'.
independent TC support in sys/dev/tc/tc.c and sys/dev/tc/tcvar.h:
* Change the tc autoconfiguration tables to use a struct tc_attach_args
instead of the ad-hoc structure.
* Change all pmax device drivers to use a `struct confargs' that's
assignment-compatible with sys/dev/tc/tcvar.h `struct tcdev_attach_args'.
Devices that can be present on a TC or as ioctl asic/mainbus builtins
use the same `struct confargs'.
* Eliminate the `BUS_CVTADDR()' macros which the pmax port inherited from
an old, now-obsolete sys/arch/alpha snapshot.
* Update the comments and debugging code in interrupt handlers to
be consistent with the machine-independent TC support.
Other commits that overlap the same source files include: re-enabling
clock-tick interrupts earlier, and counting hardclock ticks for vmstat -i.
Kernel-debugger breakpoints in user space, or FP insns that cause
underflow in a delay slot, should now work properly. Single-stepping
of arbitrary user processes, from user level, should be added.
* define PT_GETREGS and PT_SETREGS in pmax/include/ptrace.h
* Flesh out the stubs in pmax/pmax/process_machdep.c to handle
those requests.
* Now that "struct reg" is actually used, remove the bogus
#ifdef LANGUAGE_C around its definition, and redo pmax/include/reg.h
so that the definitions needed by locore.S are in a separate file,
pmax/include/regnum.h.
* update locore.S to match.
to "kn01_<func>", to avoid confounding a model name (PMAX) with the name of the
entire port (pmax).
Change the signature of interrupt-handlers to take a void *
(a pointer to the softc) and return an int (indicating spurious
interrupts or other conditions.)
Pass softc pointers to the scsi and ethernet kn01 (DS_PMAX) drivers,
rather than having unit numbers wired into the base-level interrupt
handler.
consistent with the (default) prepending of underscores to identifiers.
Because this reference is inside an ASM string it's too hairy to
conditionalize to support different toolchains that don't prepend underscores.
(Just don't do profiling with such toolchains.)
Instead of being a no-op, kn03_intr_enable() sets the sw copy of the
interrupt-enable mask *and* writes it into the IO asic intr-enable
register. Boot code sets the sw copy (kn03_tc_imask) to something
sane (KN03_IM0, with tc option slots turned off). Tested and works.
Interrupt code for other IOASIC machines should be redone so that
interrupts for devices are enabled by drivers, rather than by
cpu-specific boot code. Functions common to all IOASIC machines
(PSWARN?) should be done by asic_init().
Checked in without the above changes so that 3MAX+, MAXINE and 3MIN
interrupt-(enable,handle) can converge.
Also change the stack-traceback code to avoid having multiple returns
(and thus multiple stack pops) because with gcc -O2 that breaks the
heuristic that a "jr ra" preceding the PC precedes code to push the
current stack frame. Which breaks stacktrace() before it even
traces past itself :-(. Use a goto instead.
traps, and interrupts The earlier (4.4bsd) code didn't do the first two, and
got the last one wrong. Also print some functions (e.g., trap handlers)
by name. Add hook to use something other than printf() as the output
function, e.g,. for kernel debugging.
Tested with the `native' toolset, but not ELF format kernels.
(i.e., unwinding the $GP register is not tested.)
The stack backtrace code that interprets and unwinds stackframes is still
opaque and stylistically awkward.
and wasn't unrolled. This code runs cached and unrolled, giving an order
of magnitude improvement in some cases (e.g., DMA-capable network devices).
In use at Stanford DSG since late January 1995.
(A similar fix needs to be applied to the 3min and xine handlers.
This fixes a long-standing problem when booting with a card that
wants to interrupt (e.g., a network interface) would have interrupts
enabled before a handler was set up.
Add interrupt-counting code to model-independent interrupt handler,
and 3max (5k/200) and 3max+ (5k/240) md handlers, for vmstat -i.
Similar changes for 3min and xine are obvious but not done.
Add code for 5k/240 to read, and latch, the current value of the
IOASIC bus-cycle counter at each timer interrupt. The latched
counter is needed to accurately interpolate the bus-cycle counter value
as a high-resolution clock.
such as __warn_references() and __weak_reference() which are actually
machine dependant. This will make it easier for ports that are being
bootstraped with ELF and ECOFF based toolchains.
This change also introduces a new macro, _C_LABEL(x). _C_LABEL expands
its argument, an identifier, to a character string of the identifier
name as it is represented in an object file.
For most ports, _C_LABEL(x) will expand to "_x", for ELF based ports
_C_LABEL(x) will expand to "x".
